* Re: k3b won't burn, nerolinux will
[not found] ` <alpine.DEB.1.10.0812291432440.28158@p34.internal.lan>
@ 2008-12-29 20:22 ` Justin Piszcz
2008-12-29 20:27 ` Robert Hancock
0 siblings, 1 reply; 2+ messages in thread
From: Justin Piszcz @ 2008-12-29 20:22 UTC (permalink / raw)
To: Paul Cartwright; +Cc: linux-ide
[-- Attachment #1: Type: TEXT/PLAIN, Size: 4451 bytes --]
On Mon, 29 Dec 2008, Justin Piszcz wrote:
>
>
> On Mon, 29 Dec 2008, Paul Cartwright wrote:
>
>> On Mon December 29 2008, you wrote:
>>> Please install dvd+rw-tools as shown above (apt-get install it)
>>>
>> already installed:
>> ~$ dpkg --list|grep dvd+rw
>> ii dvd+rw-tools 7.1-3
>> DVD+-RW/R tools
>>
>>
>>> Then:
>>>
>>> Burn a DVD using the command:
>>> growisofs -Z /dev/hda=FC-6-i386-DVD.iso
>> how about:
>> growisofs -Z /dev/scd0 k3b.project.iso (existing file)
>>
>>
>>>
>>> Or a CD:
>>> cdrecord dev=/dev/scd0 -eject -v -dao driveropts=burnfree speed=48 -data
>>> file.iso
>>>
>>> Then, please provide the output from that application/burn-run. I
>>> recommend you do this to isolate the problem.
>> # growisofs -Z /dev/scd0 K3b.project.iso
>> Executing 'genisoimage K3b.project.iso | builtin_dd of=/dev/scd0 obs=32k
>> seek=0'
>> I: -input-charset not specified, using utf-8 (detected in locale settings)
>> 0.52% done, estimate finish Mon Dec 29 12:20:31 2008
>> 1.05% done, estimate finish Mon Dec 29 12:20:31 2008
>> 1.57% done, estimate finish Mon Dec 29 12:20:31 2008
>> /dev/scd0: "Current Write Speed" is 16.4x1352KBps.
>> 2.09% done, estimate finish Mon Dec 29 12:37:15 2008
>> 2.61% done, estimate finish Mon Dec 29 12:34:32 2008
>> 3.14% done, estimate finish Mon Dec 29 12:32:44 2008
>> 3.66% done, estimate finish Mon Dec 29 12:31:26 2008
>> 4.18% done, estimate finish Mon Dec 29 12:30:52 2008
>> 4.70% done, estimate finish Mon Dec 29 12:30:04 2008
>> 5.23% done, estimate finish Mon Dec 29 12:29:26 2008
>> 5.75% done, estimate finish Mon Dec 29 12:28:55 2008
>> 6.27% done, estimate finish Mon Dec 29 12:28:29 2008
>> 6.80% done, estimate finish Mon Dec 29 12:28:07 2008
>> 7.32% done, estimate finish Mon Dec 29 12:27:48 2008
>> 7.84% done, estimate finish Mon Dec 29 12:27:31 2008
>> 8.36% done, estimate finish Mon Dec 29 12:27:17 2008
>> 8.89% done, estimate finish Mon Dec 29 12:27:04 2008
>> 9.41% done, estimate finish Mon Dec 29 12:26:53 2008
>> 9.93% done, estimate finish Mon Dec 29 12:26:43 2008
>> 10.45% done, estimate finish Mon Dec 29 12:26:34 2008
>> 10.98% done, estimate finish Mon Dec 29 12:26:26 2008
>> 11.50% done, estimate finish Mon Dec 29 12:26:18 2008
>> 12.02% done, estimate finish Mon Dec 29 12:26:12 2008
>> 12.55% done, estimate finish Mon Dec 29 12:26:05 2008
>> 13.07% done, estimate finish Mon Dec 29 12:26:00 2008
>> 13.59% done, estimate finish Mon Dec 29 12:25:54 2008
>> 14.11% done, estimate finish Mon Dec 29 12:25:49 2008
>> 14.64% done, estimate finish Mon Dec 29 12:25:45 2008
>> 15.16% done, estimate finish Mon Dec 29 12:25:41 2008
>> 15.68% done, estimate finish Mon Dec 29 12:25:37 2008
>> 16.20% done, estimate finish Mon Dec 29 12:25:33 2008
>> 16.73% done, estimate finish Mon Dec 29 12:25:29 2008
>> 17.25% done, estimate finish Mon Dec 29 12:25:26 2008
>> 17.77% done, estimate finish Mon Dec 29 12:25:23 2008
>> 18.29% done, estimate finish Mon Dec 29 12:25:20 2008
>> 18.82% done, estimate finish Mon Dec 29 12:25:17 2008
>> 19.34% done, estimate finish Mon Dec 29 12:25:15 2008
>> 19.86% done, estimate finish Mon Dec 29 12:25:12 2008
>> 20.39% done, estimate finish Mon Dec 29 12:25:10 2008
>> 20.91% done, estimate finish Mon Dec 29 12:25:08 2008
>> 21.43% done, estimate finish Mon Dec 29 12:25:06 2008
>> 21.95% done, estimate finish Mon Dec 29 12:25:04 2008
>> 22.48% done, estimate finish Mon Dec 29 12:25:02 2008
>> 23.00% done, estimate finish Mon Dec 29 12:25:00 2008
>> 23.52% done, estimate finish Mon Dec 29 12:24:58 2008
>> 24.04% done, estimate finish Mon Dec 29 12:24:57 2008
>> 24.57% done, estimate finish Mon Dec 29 12:24:55 2008
>> 25.09% done, estimate finish Mon Dec 29 12:24:50 2008
>> 25.61% done, estimate finish Mon Dec 29 12:24:48 2008
>> 26.14% done, estimate finish Mon Dec 29 12:24:47 2008
>> 26.66% done, estimate finish Mon Dec 29 12:24:46 2008
>> 27.18% done, estimate finish Mon Dec 29 12:24:44 2008
>> :-[ WRITE@LBA=3c2d0h failed with SK=3h/ASC=80h/ACQ=04h]: Input/output error
>> :-( write failed: Input/output error
>> /dev/scd0: flushing cache
>> /dev/scd0: updating RMA
>> /dev/scd0: closing session
>
CC'd linux-ide for ideas here.
Also, they may ask you to try a burn with speed=1 to eliminate any weird
bottlenecks or bad media.
Justin.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: k3b won't burn, nerolinux will
2008-12-29 20:22 ` k3b won't burn, nerolinux will Justin Piszcz
@ 2008-12-29 20:27 ` Robert Hancock
0 siblings, 0 replies; 2+ messages in thread
From: Robert Hancock @ 2008-12-29 20:27 UTC (permalink / raw)
To: linux-ide; +Cc: Paul Cartwright
Justin Piszcz wrote:
>
>
> On Mon, 29 Dec 2008, Justin Piszcz wrote:
>
>>
>>
>> On Mon, 29 Dec 2008, Paul Cartwright wrote:
>>
>>> On Mon December 29 2008, you wrote:
>>>> Please install dvd+rw-tools as shown above (apt-get install it)
>>>>
>>> already installed:
>>> ~$ dpkg --list|grep dvd+rw
>>> ii dvd+rw-tools 7.1-3
>>> DVD+-RW/R tools
>>>
>>>
>>>> Then:
>>>>
>>>> Burn a DVD using the command:
>>>> growisofs -Z /dev/hda=FC-6-i386-DVD.iso
>>> how about:
>>> growisofs -Z /dev/scd0 k3b.project.iso (existing file)
>>>
>>>
>>>>
>>>> Or a CD:
>>>> cdrecord dev=/dev/scd0 -eject -v -dao driveropts=burnfree speed=48
>>>> -data
>>>> file.iso
>>>>
>>>> Then, please provide the output from that application/burn-run. I
>>>> recommend you do this to isolate the problem.
>>> # growisofs -Z /dev/scd0 K3b.project.iso
>>> Executing 'genisoimage K3b.project.iso | builtin_dd of=/dev/scd0 obs=32k
>>> seek=0'
>>> I: -input-charset not specified, using utf-8 (detected in locale
>>> settings)
>>> 0.52% done, estimate finish Mon Dec 29 12:20:31 2008
>>> 1.05% done, estimate finish Mon Dec 29 12:20:31 2008
>>> 1.57% done, estimate finish Mon Dec 29 12:20:31 2008
>>> /dev/scd0: "Current Write Speed" is 16.4x1352KBps.
>>> 2.09% done, estimate finish Mon Dec 29 12:37:15 2008
>>> 2.61% done, estimate finish Mon Dec 29 12:34:32 2008
>>> 3.14% done, estimate finish Mon Dec 29 12:32:44 2008
>>> 3.66% done, estimate finish Mon Dec 29 12:31:26 2008
>>> 4.18% done, estimate finish Mon Dec 29 12:30:52 2008
>>> 4.70% done, estimate finish Mon Dec 29 12:30:04 2008
>>> 5.23% done, estimate finish Mon Dec 29 12:29:26 2008
>>> 5.75% done, estimate finish Mon Dec 29 12:28:55 2008
>>> 6.27% done, estimate finish Mon Dec 29 12:28:29 2008
>>> 6.80% done, estimate finish Mon Dec 29 12:28:07 2008
>>> 7.32% done, estimate finish Mon Dec 29 12:27:48 2008
>>> 7.84% done, estimate finish Mon Dec 29 12:27:31 2008
>>> 8.36% done, estimate finish Mon Dec 29 12:27:17 2008
>>> 8.89% done, estimate finish Mon Dec 29 12:27:04 2008
>>> 9.41% done, estimate finish Mon Dec 29 12:26:53 2008
>>> 9.93% done, estimate finish Mon Dec 29 12:26:43 2008
>>> 10.45% done, estimate finish Mon Dec 29 12:26:34 2008
>>> 10.98% done, estimate finish Mon Dec 29 12:26:26 2008
>>> 11.50% done, estimate finish Mon Dec 29 12:26:18 2008
>>> 12.02% done, estimate finish Mon Dec 29 12:26:12 2008
>>> 12.55% done, estimate finish Mon Dec 29 12:26:05 2008
>>> 13.07% done, estimate finish Mon Dec 29 12:26:00 2008
>>> 13.59% done, estimate finish Mon Dec 29 12:25:54 2008
>>> 14.11% done, estimate finish Mon Dec 29 12:25:49 2008
>>> 14.64% done, estimate finish Mon Dec 29 12:25:45 2008
>>> 15.16% done, estimate finish Mon Dec 29 12:25:41 2008
>>> 15.68% done, estimate finish Mon Dec 29 12:25:37 2008
>>> 16.20% done, estimate finish Mon Dec 29 12:25:33 2008
>>> 16.73% done, estimate finish Mon Dec 29 12:25:29 2008
>>> 17.25% done, estimate finish Mon Dec 29 12:25:26 2008
>>> 17.77% done, estimate finish Mon Dec 29 12:25:23 2008
>>> 18.29% done, estimate finish Mon Dec 29 12:25:20 2008
>>> 18.82% done, estimate finish Mon Dec 29 12:25:17 2008
>>> 19.34% done, estimate finish Mon Dec 29 12:25:15 2008
>>> 19.86% done, estimate finish Mon Dec 29 12:25:12 2008
>>> 20.39% done, estimate finish Mon Dec 29 12:25:10 2008
>>> 20.91% done, estimate finish Mon Dec 29 12:25:08 2008
>>> 21.43% done, estimate finish Mon Dec 29 12:25:06 2008
>>> 21.95% done, estimate finish Mon Dec 29 12:25:04 2008
>>> 22.48% done, estimate finish Mon Dec 29 12:25:02 2008
>>> 23.00% done, estimate finish Mon Dec 29 12:25:00 2008
>>> 23.52% done, estimate finish Mon Dec 29 12:24:58 2008
>>> 24.04% done, estimate finish Mon Dec 29 12:24:57 2008
>>> 24.57% done, estimate finish Mon Dec 29 12:24:55 2008
>>> 25.09% done, estimate finish Mon Dec 29 12:24:50 2008
>>> 25.61% done, estimate finish Mon Dec 29 12:24:48 2008
>>> 26.14% done, estimate finish Mon Dec 29 12:24:47 2008
>>> 26.66% done, estimate finish Mon Dec 29 12:24:46 2008
>>> 27.18% done, estimate finish Mon Dec 29 12:24:44 2008
>>> :-[ WRITE@LBA=3c2d0h failed with SK=3h/ASC=80h/ACQ=04h]: Input/output
>>> error
>>> :-( write failed: Input/output error
>>> /dev/scd0: flushing cache
>>> /dev/scd0: updating RMA
>>> /dev/scd0: closing session
>>
>
> CC'd linux-ide for ideas here.
>
> Also, they may ask you to try a burn with speed=1 to eliminate any weird
> bottlenecks or bad media.
We don't have the full back story here.. The drive apparently returned
an error code that's listed as vendor-specific in the MMC specs, so hard
to say what it's trying to tell you.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-12-29 20:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <200812290933.20277.ale@pcartwright.com>
[not found] ` <200812291101.32026.ale@pcartwright.com>
[not found] ` <alpine.DEB.1.10.0812291128000.23543@p34.internal.lan>
[not found] ` <200812291223.34191.ale@pcartwright.com>
[not found] ` <alpine.DEB.1.10.0812291432440.28158@p34.internal.lan>
2008-12-29 20:22 ` k3b won't burn, nerolinux will Justin Piszcz
2008-12-29 20:27 ` Robert Hancock
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).