From: Jeff Garzik <jeff@garzik.org>
To: Brad Campbell <brad@wasp.net.au>
Cc: "Christian P. Schmidt" <schmidt@digadd.de>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org
Subject: Re: Support for Marvel 6141 in ahci.c
Date: Sat, 10 Jan 2009 10:41:42 -0500 [thread overview]
Message-ID: <4968C1B6.3010701@garzik.org> (raw)
In-Reply-To: <4968B6F8.9050005@wasp.net.au>
Brad Campbell wrote:
> Christian P. Schmidt wrote:
>> Hi Alan,
>>
>> Alan Cox wrote:
>>> On Sat, 10 Jan 2009 12:31:20 +0300
>>> "Christian P. Schmidt" <schmidt@digadd.de> wrote:
>>>
>>>> Hi all,
>>>>
>>>> The Marvell 6141
>>>> 08:00.0 SATA controller: Marvell Technology Group Ltd. 88SE614x SATA
>>>> II PCI-E controller (rev 01)
>>>> 08:00.0 0106: 11ab:6141 (rev 01)
>>>> seems to work with the ahci driver with the attached patch:
>>>
>>> Try using the PATA port.
>>
>> Sorry, can't do - the chip is on an ASUS M2N32 WS Professional
>> mainboard where the PATA is only on the MCP55.
>
> How is that working for you? I did the same style of patch back in
> 2.6.26 (on the same board) and found it died _hard_ when writing to more
> than one port at a time. It worked with only one drive attached though,
> although I could not get hot plugging to work either.
Yes... that is why the ID is not in there at present :/
Jeff
next prev parent reply other threads:[~2009-01-10 15:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-10 9:31 Support for Marvel 6141 in ahci.c Christian P. Schmidt
2009-01-10 12:24 ` Alan Cox
2009-01-10 12:54 ` Christian P. Schmidt
2009-01-10 14:55 ` Brad Campbell
2009-01-10 15:41 ` Jeff Garzik [this message]
2009-01-10 15:45 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4968C1B6.3010701@garzik.org \
--to=jeff@garzik.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=brad@wasp.net.au \
--cc=linux-ide@vger.kernel.org \
--cc=schmidt@digadd.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox