From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robert Hancock Subject: Re: Corrupt data - RAID sata_sil 3114 chip Date: Sat, 10 Jan 2009 18:32:08 -0600 Message-ID: <49693E08.3050209@shaw.ca> References: <200901032104.15242.bs@q-leap.de> <496436C4.4070305@kernel.org> <49643FD4.9080100@shaw.ca> <200901071632.02264.bs@q-leap.de> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from idcmail-mo1so.shaw.ca ([24.71.223.10]:20032 "EHLO idcmail-mo1so.shaw.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752031AbZAKAcO (ORCPT ); Sat, 10 Jan 2009 19:32:14 -0500 In-Reply-To: <200901071632.02264.bs@q-leap.de> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Bernd Schubert Cc: Tejun Heo , Alan Cox , Justin Piszcz , debian-user@lists.debian.org, linux-raid@vger.kernel.org, linux-ide@vger.kernel.org, cpardo@siliconimage.com Bernd Schubert wrote: >>> I think it's something related to setting up the PCI side of things. >>> There have been hints that incorrect CLS setting was the culprit and I >>> tried thte combinations but without any success and unfortunately the >>> problem wasn't reproducible with the hardware I have here. :-( >> As far as the cache line size register, the only thing the documentation >> says it controls _directly_ is "With the SiI3114 as a master, initiating >> a read transaction, it issues PCI command Read Multiple in place, when >> empty space in its FIFO is larger than the value programmed in this >> register." >> >> The interesting thing is the commit (log below) that added code to the >> driver to check the PCI cache line size register and set up the FIFO >> thresholds: >> >> 2005/03/24 23:32:42-05:00 Carlos.Pardo >> [PATCH] sata_sil: Fix FIFO PCI Bus Arbitration >> >> This patch set default values for the FIFO PCI Bus Arbitration to >> avoid data corruption. The root cause is due to our PCI bus master >> handling mismatch with the chipset PCI bridge during DMA xfer (write >> data to the device). The patch is to setup the DMA fifo threshold so >> that there is no chance for the DMA engine to change protocol. We have >> seen this problem only on one motherboard. >> >> Signed-off-by: Silicon Image Corporation >> Signed-off-by: Jeff Garzik >>4 >> What the code's doing is setting the FIFO thresholds, used to assign >> priority when requesting a PCI bus read or write operation, based on the >> cache line size somehow. It seems to be trusting that the chip's cache >> line size register has been set properly by the BIOS. The kernel should >> know what the cache line size is but AFAIK normally only sets it when >> the driver requests MWI. This chip doesn't support MWI, but it looks >> like pci_set_mwi would fix up the CLS register as a side effect.. >> >>> Anyways, there was an interesting report that updating the BIOS on the >>> controller fixed the problem. >>> >>> http://bugzilla.kernel.org/show_bug.cgi?id=10480 >>> >>> Taking "lspci -nnvvvxxx" output of before and after such BIOS update >>> will shed some light on what's really going on. Can you please try >>> that? >> Yes, that would be quite interesting.. the output even with the current >> BIOS would be useful to see if the BIOS set some stupid cache line size >> value.. > > Unfortunately I can't update the bios/firmware of the Sil3114 directly, it is > onboard and the firmware is included into the mainboard bios. There is not > the most recent bios version installed, but when we initially had the > problems, we first tried a bios update, but it didn't help. Well if one is really adventurous one can sometimes use some BIOS image editing tools to install an updated flash image for such integrated chips into the main BIOS image. This is definitely for advanced users only though.. > > As suggested by Robert, I'm presently trying to figure out the corruption > pattern. Actually our test tool easily provides these data. Unfortunately, it > so far didn't report anything, although the reiserfs already got corrupted. > Might be my colleague, who wrote that tool, recently broke something (as it > is the second time, it doesn't report corruptions), in the past it did work > reliably. Please give me a few more days... > > > 03:05.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3114 > [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02) > Subsystem: Silicon Image, Inc. SiI 3114 SATALink Controller > [1095:3114] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 64, Cache Line Size: 64 bytes Well, 64 seems quite reasonable, so that doesn't really give any more useful information. I'm CCing Carlos Pardo at Silicon Image who wrote the patch above, maybe he has some insight.. Carlos, we have a case here where Bernd is reporting seeing corruption on an integrated SiI3114 on a Tyan Thunder K8S Pro (S2882) board, AMD 8111 chipset. This is reportedly occurring only with certain Seagate drives. Do you have any insight into this problem, in particular as far as whether the problem worked around in the patch mentioned above might be related? There are apparently some reports of issues on NVidia chipsets as well, though I don't have any details at hand. > Interrupt: pin A routed to IRQ 19 > Region 0: I/O ports at bc00 [size=8] > Region 1: I/O ports at b880 [size=4] > Region 2: I/O ports at b800 [size=8] > Region 3: I/O ports at ac00 [size=4] > Region 4: I/O ports at a880 [size=16] > Region 5: Memory at feafec00 (32-bit, non-prefetchable) [size=1K] > Expansion ROM at fea00000 [disabled] [size=512K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > 00: 95 10 14 31 07 01 b0 02 02 00 80 01 10 40 00 00 > 10: 01 bc 00 00 81 b8 00 00 01 b8 00 00 01 ac 00 00 > 20: 81 a8 00 00 00 ec af fe 00 00 00 00 95 10 14 31 > 30: 00 00 a0 fe 60 00 00 00 00 00 00 00 0a 01 00 00 > 40: 02 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 01 00 22 06 00 40 00 64 00 00 00 00 00 00 00 00 > 70: 00 00 60 00 d0 d0 09 00 00 00 60 00 00 00 00 00 > 80: 03 00 00 00 22 00 00 00 00 00 00 00 c8 93 7f ef > 90: 00 00 00 09 ff ff 00 00 00 00 00 19 00 00 00 00 > a0: 01 31 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40 > b0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40 > c0: 84 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > > Cheers, > Bernd >