From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: linux-ide@vger.kernel.org, Andrew Victor <linux@maxim.org.za>,
linux-arm-kernel@lists.arm.linux.org.uk
Subject: Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
Date: Wed, 04 Feb 2009 15:18:05 +0300 [thread overview]
Message-ID: <4989877D.6020401@ru.mvista.com> (raw)
In-Reply-To: <200902031147.41822.stf_xl@wp.pl>
Hello.
Stanislaw Gruszka wrote:
> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
>
[...]
> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> index b753cb8..503651a 100644
> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> +++ b/arch/arm/mach-at91/at91sam9263_devices.c
> @@ -347,6 +347,103 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
> void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
> #endif
>
> +/* --------------------------------------------------------------------
> + * IDE
> + * -------------------------------------------------------------------- */
> +
> +#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
> +
> +/* Proper CS address space will be added */
> +#define AT91_IDE_TASK_FILE 0x00c00000
> +#define AT91_IDE_CTRL_REG 0x00e00000
>
Why are you assuming that these offsets are not board specifec I
wonder? Theyu clearly depend on how the -CSx were wired on the board --
it's the same board specific data as your IRQ.
> +void __init at91_add_device_ide(struct at91_ide_data *data)
> +{
>
[...]
> + /* assign CS4/5 to SMC with Compact Flash logic support
> + * and fix resources addresses */
>
It again seems like board specific configuration...
> + ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
> + switch (chipselect) {
> + case 4:
> + at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
> + ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
> + addr_space = AT91_CHIPSELECT_4;
> + break;
> + case 5:
> + at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */
> + ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
> + addr_space = AT91_CHIPSELECT_5;
> + break;
> + default:
> + printk(KERN_ERR "at91_ide: bad chip select %u\n", chipselect);
>
> + return;
>
Why do you consider it bad? Is there some SMC limitation or what?
MBR, Sergei
next prev parent reply other threads:[~2009-02-04 12:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-03 10:47 [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu Stanislaw Gruszka
2009-02-03 20:27 ` Andrew Victor
2009-02-04 9:36 ` Stanislaw Gruszka
2009-02-05 12:03 ` Sergei Shtylyov
2009-02-05 19:43 ` Andrew Victor
2009-02-05 20:01 ` Sergei Shtylyov
2009-02-05 23:52 ` Sergei Shtylyov
2009-02-05 15:06 ` Stanislaw Gruszka
2009-02-04 12:18 ` Sergei Shtylyov [this message]
2009-02-04 14:15 ` Stanislaw Gruszka
2009-02-04 15:46 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4989877D.6020401@ru.mvista.com \
--to=sshtylyov@ru.mvista.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-ide@vger.kernel.org \
--cc=linux@maxim.org.za \
--cc=stf_xl@wp.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).