From: Robert Hancock <hancockrwd@gmail.com>
To: Sagar Borikar <sagar.borikar@gmail.com>
Cc: linux-ide@vger.kernel.org, Tejun Heo <htejun@gmail.com>
Subject: Re: segate drives are not getting detected in SIL3114 and promise card
Date: Wed, 11 Mar 2009 22:32:41 -0600 [thread overview]
Message-ID: <49B89069.9040001@gmail.com> (raw)
In-Reply-To: <3fb94e50903112046t24a480a6lcd49a771c706f555@mail.gmail.com>
Sagar Borikar wrote:
> Hi,
>
> We have found that some 1TB (ST31000340AS model) and 750GB hard drives
> are not getting detected after reboot of NAS system.
> If I remove and insert it again, sometimes it get detected. Overall,
> its stochastic behaviour of the detection. This happens only in case
> of seagate drives and that too with 1TB and 750GB.
>
(snip)
>
>
> Same issue is seen on silicon image 3114 with 4 drive controller.But
> surprisingly this is not observed on 3512, 2 bay controller.
> We are using 2.6.18 kernel and on MIPS architecture.
>
> Any pointers?
2.6.18 is pretty ancient at this point, can you try a newer kernel?
prev parent reply other threads:[~2009-03-12 4:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-12 3:46 segate drives are not getting detected in SIL3114 and promise card Sagar Borikar
2009-03-12 4:32 ` Robert Hancock [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49B89069.9040001@gmail.com \
--to=hancockrwd@gmail.com \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=sagar.borikar@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).