* AHCI errors on ICH10 board
@ 2009-03-16 13:06 Volker Lanz
2009-03-16 15:06 ` Jeff Garzik
0 siblings, 1 reply; 4+ messages in thread
From: Volker Lanz @ 2009-03-16 13:06 UTC (permalink / raw)
To: linux-ide
Hi all,
last week I swapped an old Gigabyte P35 board for a new ASUS P5Q. On this new
board, which is based on ICH10, I can't get AHCI to work reliably at all. When
it's on, it doesn't take very long until I get massive errors in the kernel
log like this:
ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x3000400 action 0x6
ata1.00: irq_stat 0x45000008
ata1: SError: { Proto TrStaTrns UnrecFIS }
ata1.00: cmd 60/00:00:4a:b6:60/02:00:0c:00:00/40 tag 0 ncq 262144 in
res 51/84:00:4a:b6:60/4e:00:0c:00:00/40 Emask 0x412 (ATA bus error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
This occurs with both hard drives in the machine. It is easily triggered with
a cp -a of some large dir tree within seconds.
At the same time many things start to mysteriously segfault or break in other
strange ways.
Some observations:
* Affected kernels: 2.6.27 (Ubuntu-patched for Ubuntu 8.10), 2.6.28 (Ubuntu-
patched for Ubuntu 9.04) and 2.6.29-rc8 (mainline, installed from Ubuntu
packages, not patched AFAIK)
* Both hard drives in the affected machine used to work in AHCI mode on the
old Gigabyte board.
* Disabling NCQ as per the libATA FAQ does not make a difference.
* The mainboard BIOS is flashed to the latest version available from ASUS for
the P5Q.
* In IDE mode, everything is fine.
I'll append a kernel log (from 2.6.29-rc8), lspci output and hdparm -I output
for the drives.
Does anyone have any explanation for this? Is it a bug or a problem with this
specific configuration? Can I do anything to fix it?
Thanks,
Volker
----- begin dmesg -----
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29-020629rc8-generic (root@zinc) (gcc version
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #020629rc8 SMP Fri Mar 13 16:32:02 UTC 2009
[ 0.000000] Command line: root=UUID=736330ed-0c12-4175-91a1-3ce4004f0668 ro
nosplash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff70000 (usable)
[ 0.000000] BIOS-e820: 00000000bff70000 - 00000000bff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff7e000 - 00000000bffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffd0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x100000000
[ 0.000000] last_pfn = 0xbff70 max_arch_pfn = 0x100000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable)
[ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bff70000 (usable)
[ 0.000000] modified: 00000000bff70000 - 00000000bff7e000 (ACPI data)
[ 0.000000] modified: 00000000bff7e000 - 00000000bffd0000 (ACPI NVS)
[ 0.000000] modified: 00000000bffd0000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff70000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff70000 page 4k
[ 0.000000] kernel direct mapping tables up to bff70000 @ 10000-15000
[ 0.000000] last_map_addr: bff70000 end: bff70000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
[ 0.000000] 0100000000 - 01c0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1c0000000 @ 13000-1b000
[ 0.000000] last_map_addr: 1c0000000 end: 1c0000000
[ 0.000000] RAMDISK: 3785e000 - 37fefa6a
[ 0.000000] ACPI: RSDP 000FB410, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT BFF70100, 005C (r1 A_M_I_ OEMXSDT 11000826 MSFT
97)
[ 0.000000] ACPI: FACP BFF70290, 00F4 (r3 A_M_I_ OEMFACP 11000826 MSFT
97)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN
(4)
[ 0.000000] ACPI: DSDT BFF70440, 96DE (r1 A0993 A0993001 1 INTL
20060113)
[ 0.000000] ACPI: FACS BFF7E000, 0040
[ 0.000000] ACPI: APIC BFF70390, 006C (r1 A_M_I_ OEMAPIC 11000826 MSFT
97)
[ 0.000000] ACPI: MCFG BFF70400, 003C (r1 A_M_I_ OEMMCFG 11000826 MSFT
97)
[ 0.000000] ACPI: OEMB BFF7E040, 0089 (r1 A_M_I_ AMI_OEM 11000826 MSFT
97)
[ 0.000000] ACPI: HPET BFF79B20, 0038 (r1 A_M_I_ OEMHPET 11000826 MSFT
97)
[ 0.000000] ACPI: OSFR BFF79B60, 00B0 (r1 A_M_I_ OEMOSFR 11000826 MSFT
97)
[ 0.000000] ACPI: SSDT BFF7F040, 0A7C (r1 DpgPmm CpuPm 12 INTL
20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 01c0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0000200000 - 0000b1f778] TEXT DATA BSS ==> [0000200000
- 0000b1f778]
[ 0.000000] #3 [003785e000 - 0037fefa6a] RAMDISK ==> [003785e000
- 0037fefa6a]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00
- 0000100000]
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000
- 0000013000]
[ 0.000000] #6 [0000013000 - 0000016000] PGTABLE ==> [0000013000
- 0000016000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
[ 0.000000] [ffffe20000000000-ffffe200061fffff] PMD -> [ffff880028200000-
ffff88002e3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001c0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bff70
[ 0.000000] 0: 0x00100000 -> 0x001c0000
[ 0.000000] On node 0 totalpages: 1572606
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2443 pages reserved
[ 0.000000] DMA zone: 1483 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767912 pages, LIFO batch:31
[ 0.000000] Normal zone: 10752 pages used for memmap
[ 0.000000] Normal zone: 775680 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bff70000 -
00000000bff7e000
[ 0.000000] PM: Registered nosave memory: 00000000bff7e000 -
00000000bffd0000
[ 0.000000] PM: Registered nosave memory: 00000000bffd0000 -
00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap:
c0000000:3ee00000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1545075
[ 0.000000] Kernel command line:
root=UUID=736330ed-0c12-4175-91a1-3ce4004f0668 ro nosplash
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 2833.074 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.004000] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.004000] allocated 73400320 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.004000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.004000] Memory: 6021508k/7340032k available (4635k kernel code,
1049608k absent, 267948k reserved, 2615k data, 544k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5666.14 BogoMIPS (lpj=11332296)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20081204
[ 0.016043] Setting APIC routing to flat
[ 0.016576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056309] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5665.93
BogoMIPS (lpj=11331878)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.144826] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.145199] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.148145] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5665.96
BogoMIPS (lpj=11331939)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.240870] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.241241] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.244121] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5665.96
BogoMIPS (lpj=11331929)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.336873] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.337245] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340067] Brought up 4 CPUs
[ 0.340110] Total of 4 processors activated (22664.02 BogoMIPS).
[ 0.340192] CPU0 attaching sched-domain:
[ 0.340193] domain 0: span 0-1 level MC
[ 0.340195] groups: 0 1
[ 0.340197] domain 1: span 0-3 level CPU
[ 0.340199] groups: 0-1 2-3
[ 0.340202] CPU1 attaching sched-domain:
[ 0.340203] domain 0: span 0-1 level MC
[ 0.340204] groups: 1 0
[ 0.340206] domain 1: span 0-3 level CPU
[ 0.340207] groups: 0-1 2-3
[ 0.340210] CPU2 attaching sched-domain:
[ 0.340211] domain 0: span 2-3 level MC
[ 0.340212] groups: 2 3
[ 0.340214] domain 1: span 0-3 level CPU
[ 0.340215] groups: 2-3 0-1
[ 0.340218] CPU3 attaching sched-domain:
[ 0.340219] domain 0: span 2-3 level MC
[ 0.340220] groups: 3 2
[ 0.340222] domain 1: span 0-3 level CPU
[ 0.340223] groups: 2-3 0-1
[ 0.340309] net_namespace: 1840 bytes
[ 0.340309] Booting paravirtualized kernel on bare hardware
[ 0.340309] regulator: core version 0.5
[ 0.340309] Time: 10:43:31 Date: 03/16/09
[ 0.340681] NET: Registered protocol family 16
[ 0.340736] ACPI: bus type pci registered
[ 0.344032] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
[ 0.344073] PCI: Not using MMCONFIG.
[ 0.344110] PCI: Using configuration type 1 for base access
[ 0.348026] bio: create slab <bio-0> at 0
[ 0.352005] ACPI: EC: Look up EC in DSDT
[ 0.364620] ACPI: Interpreter enabled
[ 0.364664] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.364846] ACPI: Using IOAPIC for interrupt routing
[ 0.364941] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
[ 0.367563] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.374191] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381184] ACPI: No dock devices found.
[ 0.381184] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381184] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.381184] pci 0000:00:01.0: PME# disabled
[ 0.381184] pci 0000:00:1a.0: reg 20 io port: [0xc800-0xc81f]
[ 0.381184] pci 0000:00:1a.1: reg 20 io port: [0xc880-0xc89f]
[ 0.381184] pci 0000:00:1a.2: reg 20 io port: [0xcc00-0xcc1f]
[ 0.381184] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdbfffc00-0xdbffffff]
[ 0.381184] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.381184] pci 0000:00:1a.7: PME# disabled
[ 0.381184] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdbff8000-0xdbffbfff]
[ 0.381184] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.381184] pci 0000:00:1b.0: PME# disabled
[ 0.381184] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.381184] pci 0000:00:1c.0: PME# disabled
[ 0.381184] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.381184] pci 0000:00:1c.5: PME# disabled
[ 0.381184] pci 0000:00:1d.0: reg 20 io port: [0xc080-0xc09f]
[ 0.381184] pci 0000:00:1d.1: reg 20 io port: [0xc400-0xc41f]
[ 0.381184] pci 0000:00:1d.2: reg 20 io port: [0xc480-0xc49f]
[ 0.381184] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdbfff800-0xdbfffbff]
[ 0.384018] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.384060] pci 0000:00:1d.7: PME# disabled
[ 0.384193] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.384243] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.384284] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294
(mask 0003)
[ 0.384335] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700
(mask 001f)
[ 0.384430] pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
[ 0.384434] pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
[ 0.384438] pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
[ 0.384442] pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
[ 0.384446] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f]
[ 0.384450] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdbffe800-0xdbffefff]
[ 0.384474] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.384514] pci 0000:00:1f.2: PME# disabled
[ 0.384572] pci 0000:00:1f.3: reg 10 64bit mmio: [0xdbfff400-0xdbfff4ff]
[ 0.384582] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.384616] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
[ 0.384623] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.384630] pci 0000:01:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
[ 0.384634] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.384638] pci 0000:01:00.0: reg 30 32bit mmio: [0xdfee0000-0xdfefffff]
[ 0.384682] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.384684] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xdfefffff]
[ 0.384687] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xc0000000-0xcfffffff]
[ 0.384720] pci 0000:00:1c.0: bridge 64bit mmio pref:
[0xdaf00000-0xdaffffff]
[ 0.384764] pci 0000:02:00.0: reg 10 64bit mmio: [0xdffc0000-0xdfffffff]
[ 0.384771] pci 0000:02:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.384826] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.384874] pci 0000:02:00.0: PME# disabled
[ 0.384947] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
[ 0.384950] pci 0000:00:1c.5: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.384978] pci 0000:04:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 0.385001] pci 0000:04:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebfffff]
[ 0.385016] pci 0000:04:00.0: supports D1 D2
[ 0.385017] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.385058] pci 0000:04:00.0: PME# disabled
[ 0.385113] pci 0000:04:02.0: reg 10 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.385163] pci 0000:04:03.0: reg 10 32bit mmio: [0xfebbf000-0xfebbffff]
[ 0.385200] pci 0000:04:03.0: supports D1 D2
[ 0.385202] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.385243] pci 0000:04:03.0: PME# disabled
[ 0.385312] pci 0000:00:1e.0: transparent bridge
[ 0.385353] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0000000-0xfebfffff]
[ 0.385369] pci_bus 0000:00: on NUMA node 0
[ 0.385373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.385494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.385549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.385639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.385700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.400530] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[ 0.400558] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[ 0.401023] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14
*15)
[ 0.401488] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 0.401952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.402477] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14
15)
[ 0.404147] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14
15)
[ 0.404611] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14
15)
[ 0.405023] ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB]
- CB, should be C3 [20081204]
[ 0.405023] SCSI subsystem initialized
[ 0.405023] libata version 3.00 loaded.
[ 0.405023] usbcore: registered new interface driver usbfs
[ 0.405023] usbcore: registered new interface driver hub
[ 0.405023] usbcore: registered new device driver usb
[ 0.405023] ACPI: WMI: Mapper loaded
[ 0.405023] PCI: Using ACPI for IRQ routing
[ 0.420008] Bluetooth: Core ver 2.14
[ 0.420060] NET: Registered protocol family 31
[ 0.420060] Bluetooth: HCI device and connection manager initialized
[ 0.420088] Bluetooth: HCI socket layer initialized
[ 0.420126] NET: Registered protocol family 8
[ 0.420164] NET: Registered protocol family 20
[ 0.420216] NetLabel: Initializing
[ 0.420216] NetLabel: domain hash size = 128
[ 0.420216] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.420216] NetLabel: unlabeled traffic allowed by default
[ 0.420216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.420219] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.443978] pnp: PnP ACPI init
[ 0.444023] ACPI: bus type pnp registered
[ 0.447667] pnp: PnP ACPI: found 15 devices
[ 0.447706] ACPI: ACPI bus type pnp unregistered
[ 0.447749] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.447793] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.447836] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.447876] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.447920] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.447960] system 00:08: iomem range 0xfed08000-0xfed08fff has been
reserved
[ 0.448001] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.448042] system 00:08: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.448083] system 00:08: iomem range 0xfed50000-0xfed8ffff has been
reserved
[ 0.448126] system 00:0b: iomem range 0xffc00000-0xffefffff has been
reserved
[ 0.448169] system 00:0c: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.448210] system 00:0c: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.448252] system 00:0d: iomem range 0xe0000000-0xefffffff has been
reserved
[ 0.448295] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.448335] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.448376] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.448416] system 00:0e: iomem range 0x100000-0xbfffffff could not be
reserved
[ 0.448464] system 00:0e: iomem range 0xe0000000-0xffffffff could not be
reserved
[ 0.453857] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.453897] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.453937] pci 0000:00:01.0: MEM window: 0xdc000000-0xdfefffff
[ 0.453977] pci 0000:00:01.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
[ 0.454027] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.454066] pci 0000:00:1c.0: IO window: disabled
[ 0.454106] pci 0000:00:1c.0: MEM window: disabled
[ 0.454146] pci 0000:00:1c.0: PREFETCH window:
0x000000daf00000-0x000000daffffff
[ 0.454197] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.454237] pci 0000:00:1c.5: IO window: 0xe000-0xefff
[ 0.454278] pci 0000:00:1c.5: MEM window: 0xdff00000-0xdfffffff
[ 0.454319] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.454362] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.454401] pci 0000:00:1e.0: IO window: disabled
[ 0.454441] pci 0000:00:1e.0: MEM window: 0xf0000000-0xfebfffff
[ 0.454482] pci 0000:00:1e.0: PREFETCH window:
0x000000d0000000-0x000000d00fffff
[ 0.454538] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.454579] pci 0000:00:01.0: setting latency timer to 64
[ 0.454585] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.454626] pci 0000:00:1c.0: setting latency timer to 64
[ 0.454631] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.454672] pci 0000:00:1c.5: setting latency timer to 64
[ 0.454677] pci 0000:00:1e.0: setting latency timer to 64
[ 0.454679] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.454681] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.454682] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.454683] pci_bus 0000:01: resource 1 mem: [0xdc000000-0xdfefffff]
[ 0.454685] pci_bus 0000:01: resource 2 mem: [0xc0000000-0xcfffffff]
[ 0.454686] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.454687] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.454688] pci_bus 0000:03: resource 1 mem: [0x0-0x0]
[ 0.454690] pci_bus 0000:03: resource 2 mem: [0xdaf00000-0xdaffffff]
[ 0.454691] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.454692] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.454694] pci_bus 0000:02: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.454695] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[ 0.454696] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.454697] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 0.454699] pci_bus 0000:04: resource 1 mem: [0xf0000000-0xfebfffff]
[ 0.454700] pci_bus 0000:04: resource 2 mem: [0xd0000000-0xd00fffff]
[ 0.454701] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.454703] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.454722] NET: Registered protocol family 2
[ 0.499785] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.500281] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.500424] Switched to high resolution mode on CPU 3
[ 0.500427] Switched to high resolution mode on CPU 2
[ 0.501066] Switched to high resolution mode on CPU 1
[ 0.501628] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.502146] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.502186] TCP reno registered
[ 0.503728] Switched to high resolution mode on CPU 0
[ 0.512106] NET: Registered protocol family 1
[ 0.512235] checking if image is initramfs... it is
[ 1.009379] Freeing initrd memory: 7750k freed
[ 1.012674] Scanning for low memory corruption every 60 seconds
[ 1.013036] audit: initializing netlink socket (disabled)
[ 1.013086] type=2000 audit(1237200211.012:1): initialized
[ 1.020267] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.023275] VFS: Disk quotas dquot_6.5.2
[ 1.023396] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.024553] fuse init (API version 7.11)
[ 1.024812] msgmni has been set to 11777
[ 1.025116] alg: No test for stdrng (krng)
[ 1.025170] io scheduler noop registered
[ 1.025224] io scheduler anticipatory registered
[ 1.025262] io scheduler deadline registered
[ 1.025385] io scheduler cfq registered (default)
[ 1.025560] pci 0000:01:00.0: Boot video device
[ 1.025676] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.025710] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.025869] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.025909] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.026150] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.026189] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 1.026544] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.027315] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.027810] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.027859] ACPI: Power Button (FF) [PWRF]
[ 1.027988] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.028060] ACPI: Power Button (CM) [PWRB]
[ 1.028922] ACPI: SSDT BFF7E0D0, 0235 (r1 DpgPmm P001Ist 11 INTL
20060113)
[ 1.029398] ACPI: SSDT BFF7E9D0, 04B2 (r1 PmRef P001Cst 3001 INTL
20060113)
[ 1.029988] Monitor-Mwait will be used to enter C-1 state
[ 1.029992] Monitor-Mwait will be used to enter C-2 state
[ 1.029996] Monitor-Mwait will be used to enter C-3 state
[ 1.030059] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.030259] processor ACPI_CPU:00: registered as cooling_device0
[ 1.030635] ACPI: SSDT BFF7E310, 0235 (r1 DpgPmm P002Ist 12 INTL
20060113)
[ 1.031007] ACPI: SSDT BFF7EE90, 0085 (r1 PmRef P002Cst 3000 INTL
20060113)
[ 1.031669] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.031866] processor ACPI_CPU:01: registered as cooling_device1
[ 1.032250] ACPI: SSDT BFF7E550, 0235 (r1 DpgPmm P003Ist 12 INTL
20060113)
[ 1.032626] ACPI: SSDT BFF7EF20, 0085 (r1 PmRef P003Cst 3000 INTL
20060113)
[ 1.033374] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 1.033592] processor ACPI_CPU:02: registered as cooling_device2
[ 1.033958] ACPI: SSDT BFF7E790, 0235 (r1 DpgPmm P004Ist 12 INTL
20060113)
[ 1.034334] ACPI: SSDT BFF7EFB0, 0085 (r1 PmRef P004Cst 3000 INTL
20060113)
[ 1.035083] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 1.035279] processor ACPI_CPU:03: registered as cooling_device3
[ 1.037799] XENFS: not registering filesystem on non-xen platform
[ 1.072329] Linux agpgart interface v0.103
[ 1.072370] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.075442] brd: module loaded
[ 1.076622] loop: module loaded
[ 1.076913] Fixed MDIO Bus: probed
[ 1.076954] PPP generic driver version 2.4.2
[ 1.077792] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 1.077900] Driver 'sd' needs updating - please use bus_type methods
[ 1.077987] Driver 'sr' needs updating - please use bus_type methods
[ 1.078138] ahci 0000:00:1f.2: version 3.0
[ 1.078151] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.078223] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.078258] ahci: SSS flag set, parallel bus scan disabled
[ 1.078323] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 1.078372] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp
pio slum part ems
[ 1.078422] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.078731] scsi0 : ahci
[ 1.078945] scsi1 : ahci
[ 1.079140] scsi2 : ahci
[ 1.079334] scsi3 : ahci
[ 1.079529] scsi4 : ahci
[ 1.079722] scsi5 : ahci
[ 1.079946] ata1: SATA max UDMA/133 abar m2048@0xdbffe800 port 0xdbffe900
irq 27
[ 1.079996] ata2: SATA max UDMA/133 abar m2048@0xdbffe800 port 0xdbffe980
irq 27
[ 1.080047] ata3: SATA max UDMA/133 abar m2048@0xdbffe800 port 0xdbffea00
irq 27
[ 1.080095] ata4: SATA max UDMA/133 abar m2048@0xdbffe800 port 0xdbffea80
irq 27
[ 1.080143] ata5: SATA max UDMA/133 abar m2048@0xdbffe800 port 0xdbffeb00
irq 27
[ 1.080192] ata6: SATA max UDMA/133 abar m2048@0xdbffe800 port 0xdbffeb80
irq 27
[ 1.564011] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.584576] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 1.584622] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.586632] ata1.00: configured for UDMA/133
[ 1.600097] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 1.600405] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1.600463] sd 0:0:0:0: [sda] Write Protect is off
[ 1.600502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.600519] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.600603] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1.600659] sd 0:0:0:0: [sda] Write Protect is off
[ 1.600698] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.600715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.600765] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3
[ 1.688136] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.688328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.168014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.168896] ata2.00: ATA-7: ST3300831AS, 3.02, max UDMA/133
[ 2.168942] ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.169860] ata2.00: configured for UDMA/133
[ 2.184074] scsi 1:0:0:0: Direct-Access ATA ST3300831AS 3.02
PQ: 0 ANSI: 5
[ 2.184373] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors: (300
GB/279 GiB)
[ 2.184431] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.184470] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.184489] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.184582] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors: (300
GB/279 GiB)
[ 2.184638] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.184677] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.184694] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.184744] sdb: sdb1 sdb2
[ 2.204445] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.204628] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.524011] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.024009] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.025187] ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
[ 3.026671] ata4.00: configured for UDMA/100
[ 3.041104] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01
PQ: 0 ANSI: 5
[ 3.044436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 3.044489] Uniform CD-ROM driver Revision: 3.20
[ 3.044690] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.044801] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.364011] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.700010] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.718635] usbcore: registered new interface driver libusual
[ 3.718778] usbcore: registered new interface driver usbserial
[ 3.718866] USB Serial support registered for generic
[ 3.718954] usbcore: registered new interface driver usbserial_generic
[ 3.718994] usbserial: USB Serial Driver core
[ 3.719228] PNP: No PS/2 controller found. Probing ports directly.
[ 3.722022] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.722064] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.741590] mice: PS/2 mouse device common for all mice
[ 3.789660] rtc_cmos 00:03: RTC can wake from S4
[ 3.789765] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.789823] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.790062] device-mapper: uevent: version 1.0.3
[ 3.790290] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.com
[ 3.790663] device-mapper: multipath: version 1.0.5 loaded
[ 3.790703] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.791858] cpuidle: using governor ladder
[ 3.793421] cpuidle: using governor menu
[ 3.793545] Marking TSC unstable due to TSC halts in idle
[ 3.793877] TCP cubic registered
[ 3.794203] NET: Registered protocol family 10
[ 3.794590] lo: Disabled Privacy Extensions
[ 3.794837] NET: Registered protocol family 17
[ 3.794936] Bluetooth: L2CAP ver 2.11
[ 3.794979] Bluetooth: L2CAP socket layer initialized
[ 3.795019] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.795057] Bluetooth: SCO socket layer initialized
[ 3.795152] Bluetooth: RFCOMM socket layer initialized
[ 3.795209] Bluetooth: RFCOMM TTY layer initialized
[ 3.795247] Bluetooth: RFCOMM ver 1.10
[ 3.797015] registered taskstats version 1
[ 3.797149] Magic number: 1:925:729
[ 3.797266] rtc_cmos 00:03: setting system clock to 2009-03-16 10:43:34 UTC
(1237200214)
[ 3.797321] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.797360] EDD information not available.
[ 3.797424] Freeing unused kernel memory: 544k freed
[ 3.797579] Write protecting the kernel read-only data: 6668k
[ 3.997729] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.997838] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 3.997885] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.997887] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.997994] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 3.998074] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 3.998181] usb usb1: configuration #1 chosen from 1 choice
[ 3.998239] hub 1-0:1.0: USB hub found
[ 3.998282] hub 1-0:1.0: 2 ports detected
[ 3.998388] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 3.998437] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.998439] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.998509] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 2
[ 3.998581] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 3.998672] usb usb2: configuration #1 chosen from 1 choice
[ 3.998728] hub 2-0:1.0: USB hub found
[ 3.998769] hub 2-0:1.0: 2 ports detected
[ 3.998860] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 3.998905] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.998907] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.998975] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 3
[ 3.999047] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 3.999137] usb usb3: configuration #1 chosen from 1 choice
[ 3.999192] hub 3-0:1.0: USB hub found
[ 3.999232] hub 3-0:1.0: 2 ports detected
[ 3.999322] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 3.999366] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.999368] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.999438] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 4
[ 3.999508] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 3.999597] usb usb4: configuration #1 chosen from 1 choice
[ 3.999651] hub 4-0:1.0: USB hub found
[ 3.999692] hub 4-0:1.0: 2 ports detected
[ 3.999777] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 3.999822] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.999824] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.999895] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 5
[ 3.999965] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 4.000062] usb usb5: configuration #1 chosen from 1 choice
[ 4.000116] hub 5-0:1.0: USB hub found
[ 4.000157] hub 5-0:1.0: 2 ports detected
[ 4.000244] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 4.000288] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.000290] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.000359] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 6
[ 4.000424] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 4.000512] usb usb6: configuration #1 chosen from 1 choice
[ 4.000566] hub 6-0:1.0: USB hub found
[ 4.000606] hub 6-0:1.0: 2 ports detected
[ 4.002858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.002899] Warning! ehci_hcd should always be loaded before uhci_hcd and
ohci_hcd, not after
[ 4.002963] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 4.003032] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.003034] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.003708] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 7
[ 4.007666] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.007709] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.007713] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdbfffc00
[ 4.013263] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.013311] ATL1E 0000:02:00.0: setting latency timer to 64
[ 4.021511] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.021599] usb usb7: configuration #1 chosen from 1 choice
[ 4.021659] hub 7-0:1.0: USB hub found
[ 4.021701] hub 7-0:1.0: 6 ports detected
[ 4.021803] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 4.021851] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.021853] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.021924] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 8
[ 4.025855] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.025896] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.025901] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdbfff800
[ 4.038029] ohci1394 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 4.041509] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.041605] usb usb8: configuration #1 chosen from 1 choice
[ 4.041662] hub 8-0:1.0: USB hub found
[ 4.041702] hub 8-0:1.0: 6 ports detected
[ 4.095537] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]
MMIO=[febbf000-febbf7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 5.041543] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 5.209696] usb 4-1: configuration #1 chosen from 1 choice
[ 5.211660] hub 4-1:1.0: USB hub found
[ 5.213594] hub 4-1:1.0: 4 ports detected
[ 5.372136] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001920cd1]
[ 5.457555] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 5.500050] Clocksource tsc unstable (delta = -101317082 ns)
[ 5.580055] usb 4-2: device descriptor read/64, error -71
[ 5.804046] usb 4-2: device descriptor read/64, error -71
[ 6.020055] usb 4-2: new full speed USB device using uhci_hcd and address 4
[ 6.140043] usb 4-2: device descriptor read/64, error -71
[ 6.364044] usb 4-2: device descriptor read/64, error -71
[ 6.637546] usb 4-2: new full speed USB device using uhci_hcd and address 5
[ 7.052045] usb 4-2: device not accepting address 5, error -71
[ 7.164042] usb 4-2: new full speed USB device using uhci_hcd and address 6
[ 7.572053] usb 4-2: device not accepting address 6, error -71
[ 7.572103] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 7.812054] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 8.094165] usb 5-1: configuration #1 chosen from 1 choice
[ 8.336060] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 8.511122] usb 5-2: configuration #1 chosen from 1 choice
[ 8.521946] usbcore: registered new interface driver hiddev
[ 8.541766] input: Logitech USB RECEIVER as
/devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.0/input/input3
[ 8.577467] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.1-2/input0
[ 8.577533] usbcore: registered new interface driver usbhid
[ 8.578062] usbhid: v2.6:USB HID core driver
[ 8.752542] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 8.924576] usb 6-1: configuration #1 chosen from 1 choice
[ 9.164044] usb 6-2: new low speed USB device using uhci_hcd and address 3
[ 9.333578] usb 6-2: configuration #1 chosen from 1 choice
[ 9.409613] usb 4-1.4: new low speed USB device using uhci_hcd and address
7
[ 9.454906] kjournald starting. Commit interval 5 seconds
[ 9.454940] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.550666] usb 4-1.4: configuration #1 chosen from 1 choice
[ 9.577301] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input4
[ 9.601104] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10
Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.4/input0
[ 9.624878] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.1/input/input5
[ 9.665070] generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10
Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.4/input1
[ 14.524237] udevd version 124 started
[ 14.862021] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.303797] nvidia: module license 'NVIDIA' taints kernel.
[ 15.555312] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.555376] nvidia 0000:01:00.0: setting latency timer to 64
[ 15.555757] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.11 Wed Nov
26 10:53:43 PST 2008
[ 15.638297] iTCO_vendor_support: vendor-support=0
[ 15.688891] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 15.689045] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 15.689160] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.793429] Linux video capture interface: v2.00
[ 15.799908] pwc: Philips webcam module version 10.0.13 loaded.
[ 15.799955] pwc: Supports Philips PCA645/646, PCVC675/680/690,
PCVC720[40]/730/740/750 & PCVC830/840.
[ 15.800011] pwc: Also supports the Askey VC010, various Logitech Quickcams,
Samsung MPC-C10 and MPC-C30,
[ 15.800073] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and
Visionite VCS-UC300 and VCS-UM100.
[ 15.800143] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
[ 15.800230] pwc: Registered as /dev/video0.
[ 15.803099] usbcore: registered new interface driver Philips webcam
[ 15.911617] Echoaudio Mia 0000:04:02.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 15.911729] Echoaudio Mia 0000:04:02.0: firmware: requesting ea/mia_dsp.fw
[ 15.957024] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 15.957146] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.976269] Echoaudio Mia 0000:04:02.0: firmware: requesting
ea/loader_dsp.fw
[ 16.012374] Card registered: Mia rev.1 (DSP56361) at 0xfea00000 irq 18
[ 16.206411] usbcore: registered new interface driver snd-usb-audio
[ 16.468106] lp: driver loaded but no devices found
[ 16.512057] coretemp coretemp.0: Using relative temperature scale!
[ 16.512127] coretemp coretemp.1: Using relative temperature scale!
[ 16.512208] coretemp coretemp.2: Using relative temperature scale!
[ 16.512323] coretemp coretemp.3: Using relative temperature scale!
[ 16.527668] w83627ehf: Found W83627EHG chip at 0x290
[ 16.527728] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI
region HWRE [0x290-0x299]
[ 16.527778] ACPI: Device needs an ACPI driver
[ 16.692652] Adding 6562544k swap on /dev/sda3. Priority:-1 extents:1
across:6562544k
[ 17.138301] EXT3 FS on sda8, internal journal
[ 18.515652] kjournald starting. Commit interval 5 seconds
[ 18.515870] EXT3 FS on sda5, internal journal
[ 18.515875] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.674401] kjournald starting. Commit interval 5 seconds
[ 18.674628] EXT3 FS on sda7, internal journal
[ 18.674633] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.698835] kjournald starting. Commit interval 5 seconds
[ 18.699050] EXT3 FS on sda9, internal journal
[ 18.699055] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.716537] kjournald starting. Commit interval 5 seconds
[ 18.716546] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.985365] kjournald starting. Commit interval 5 seconds
[ 18.993825] EXT3 FS on sdb2, internal journal
[ 18.993830] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.287858] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.985514] warning: `avahi-daemon' uses 32-bit capabilities (legacy
support in use)
[ 23.459492] ppdev: user-space parallel port driver
[ 28.737123] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 28.737126] vboxdrv: Successfully done.
[ 28.737128] vboxdrv: Found 4 processor cores.
[ 28.737177] VBoxDrv: dbg - g_abExecMemory=ffffffffa0a06aa0
[ 28.737214] vboxdrv: fAsync=1 offMin=0x1a1b2 offMax=0x1a1b2
[ 28.737258] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is
'normal'.
[ 28.737260] vboxdrv: Successfully loaded version 2.1.4 (interface
0x000a0009).
[ 28.943758] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0ba3960
[ 31.020231] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.020234] Bluetooth: BNEP filters: protocol multicast
[ 31.044102] Bridge firewalling registered
[ 32.917828] IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 35.129421] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
[ 35.129562] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<1000 Mbps Full
Duplex>
[ 35.130727] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.131980] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 36.890675] RPC: Registered udp transport module.
[ 36.890678] RPC: Registered tcp transport module.
[ 45.780028] eth0: no IPv6 routers present
[ 93.576251] ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x3000400 action 0x6
[ 93.576301] ata1.00: irq_stat 0x45000008
[ 93.576345] ata1: SError: { Proto TrStaTrns UnrecFIS }
[ 93.576393] ata1.00: cmd 60/00:00:4a:b6:60/02:00:0c:00:00/40 tag 0 ncq
262144 in
[ 93.576394] res 51/84:00:4a:b6:60/4e:00:0c:00:00/40 Emask 0x412
(ATA bus error) <F>
[ 93.576502] ata1.00: status: { DRDY ERR }
[ 93.576546] ata1.00: error: { ICRC ABRT }
[ 93.576593] ata1: hard resetting link
[ 94.060055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 94.064100] ata1.00: configured for UDMA/133
[ 94.064110] ata1: EH complete
[ 94.064170] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 94.064188] sd 0:0:0:0: [sda] Write Protect is off
[ 94.064190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 94.064213] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 94.454991] ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x3000400 action 0x6
[ 94.455041] ata1.00: irq_stat 0x45000008
[ 94.455085] ata1: SError: { Proto TrStaTrns UnrecFIS }
[ 94.455133] ata1.00: cmd 60/80:00:6a:2c:b1/01:00:04:00:00/40 tag 0 ncq
196608 in
[ 94.455134] res 51/84:00:6a:2c:b1/4e:00:04:00:00/40 Emask 0x412
(ATA bus error) <F>
[ 94.455241] ata1.00: status: { DRDY ERR }
[ 94.455285] ata1.00: error: { ICRC ABRT }
[ 94.455332] ata1: hard resetting link
[ 94.936080] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 94.945179] ata1.00: configured for UDMA/133
[ 94.945188] ata1: EH complete
[ 94.945254] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 94.945273] sd 0:0:0:0: [sda] Write Protect is off
[ 94.945276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 94.945300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 96.162692] ata1.00: exception Emask 0x2 SAct 0x8000 SErr 0x3000400 action
0x6
[ 96.162749] ata1.00: irq_stat 0x45000008
[ 96.162793] ata1: SError: { Proto TrStaTrns UnrecFIS }
[ 96.162842] ata1.00: cmd 60/78:78:62:40:b1/01:00:04:00:00/40 tag 15 ncq
192512 in
[ 96.162843] res 51/84:78:62:40:b1/4e:0b:04:00:00/40 Emask 0x412
(ATA bus error) <F>
[ 96.162951] ata1.00: status: { DRDY ERR }
[ 96.162995] ata1.00: error: { ICRC ABRT }
[ 96.163042] ata1: hard resetting link
[ 96.644047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 96.666697] ata1.00: configured for UDMA/133
[ 96.666704] ata1: EH complete
[ 96.666755] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 96.666773] sd 0:0:0:0: [sda] Write Protect is off
[ 96.666776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 96.666799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 96.759599] ata1: limiting SATA link speed to 1.5 Gbps
[ 96.759603] ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x3000400 action 0x6
[ 96.759650] ata1.00: irq_stat 0x45000008
[ 96.759693] ata1: SError: { Proto TrStaTrns UnrecFIS }
[ 96.759741] ata1.00: cmd 60/00:00:4a:4e:6f/02:00:04:00:00/40 tag 0 ncq
262144 in
[ 96.759742] res 51/84:00:4a:4e:6f/4e:00:04:00:00/40 Emask 0x412
(ATA bus error) <F>
[ 96.759851] ata1.00: status: { DRDY ERR }
[ 96.759894] ata1.00: error: { ICRC ABRT }
[ 96.759941] ata1: hard resetting link
[ 97.240098] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 97.255832] ata1.00: configured for UDMA/133
[ 97.255841] ata1: EH complete
[ 97.255896] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 97.255912] sd 0:0:0:0: [sda] Write Protect is off
[ 97.255914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 97.255937] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.290164] ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x3000400 action 0x6
[ 97.290219] ata1.00: irq_stat 0x45000008
[ 97.290262] ata1: SError: { Proto TrStaTrns UnrecFIS }
[ 97.290309] ata1.00: cmd 60/00:00:4a:50:6f/02:00:04:00:00/40 tag 0 ncq
262144 in
[ 97.290310] res 51/84:00:4a:50:6f/4e:00:04:00:00/40 Emask 0x412
(ATA bus error) <F>
[ 97.290418] ata1.00: status: { DRDY ERR }
[ 97.290462] ata1.00: error: { ICRC ABRT }
[ 97.290508] ata1: hard resetting link
[ 97.773546] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 97.796137] ata1.00: configured for UDMA/133
[ 97.796152] ata1: EH complete
[ 97.796216] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 97.796235] sd 0:0:0:0: [sda] Write Protect is off
[ 97.796237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 97.796260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 98.658005] ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x3000400 action 0x6
[ 98.658061] ata1.00: irq_stat 0x45000008
[ 98.658105] ata1: SError: { Proto TrStaTrns UnrecFIS }
[ 98.658154] ata1.00: cmd 60/48:00:d2:20:6b/01:00:04:00:00/40 tag 0 ncq
167936 in
[ 98.658155] res 51/84:00:d2:20:6b/4e:00:04:00:00/40 Emask 0x412
(ATA bus error) <F>
[ 98.658263] ata1.00: status: { DRDY ERR }
[ 98.658306] ata1.00: error: { ICRC ABRT }
[ 98.658353] ata1: hard resetting link
[ 104.180057] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 104.190202] ata1.00: configured for UDMA/133
[ 104.190210] ata1: EH complete
[ 104.190260] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 104.190285] sd 0:0:0:0: [sda] Write Protect is off
[ 104.190287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 104.190311] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 586.943468] attempt to access beyond end of device
[ 586.943472] sda8: rw=0, want=13616349448, limit=58605057
[ 586.943475] attempt to access beyond end of device
[ 586.943477] sda8: rw=0, want=15621368680, limit=58605057
[ 586.943480] attempt to access beyond end of device
[ 586.943482] sda8: rw=0, want=9036237064, limit=58605057
[ 586.943485] attempt to access beyond end of device
[ 586.943487] sda8: rw=0, want=13304482384, limit=58605057
[ 586.943489] attempt to access beyond end of device
[ 586.943491] sda8: rw=0, want=13079087944, limit=58605057
[ 586.943494] attempt to access beyond end of device
[ 586.943496] sda8: rw=0, want=15354012448, limit=58605057
[ 586.943499] attempt to access beyond end of device
[ 586.943500] sda8: rw=0, want=15359083424, limit=58605057
[ 586.943503] attempt to access beyond end of device
[ 586.943505] sda8: rw=0, want=13338611976, limit=58605057
[ 586.943508] attempt to access beyond end of device
[ 586.943510] sda8: rw=0, want=13075979104, limit=58605057
[ 586.943512] attempt to access beyond end of device
[ 586.943514] sda8: rw=0, want=13572981664, limit=58605057
[ 586.943517] attempt to access beyond end of device
[ 586.943519] sda8: rw=0, want=15083445152, limit=58605057
[ 586.943521] attempt to access beyond end of device
[ 586.943523] sda8: rw=0, want=4300446512, limit=58605057
[ 586.943528] attempt to access beyond end of device
[ 586.943530] sda8: rw=0, want=4347488520, limit=58605057
[ 586.943532] attempt to access beyond end of device
[ 586.943534] sda8: rw=0, want=13079478536, limit=58605057
[ 586.943537] attempt to access beyond end of device
[ 586.943539] sda8: rw=0, want=13036104560, limit=58605057
[ 586.943541] attempt to access beyond end of device
[ 586.943543] sda8: rw=0, want=15592915872, limit=58605057
[ 586.943546] attempt to access beyond end of device
[ 586.943548] sda8: rw=0, want=5932034312, limit=58605057
[ 586.943550] attempt to access beyond end of device
[ 586.943552] sda8: rw=0, want=14548703496, limit=58605057
[ 586.943555] attempt to access beyond end of device
[ 586.943557] sda8: rw=0, want=4355988272, limit=58605057
[ 586.943558] attempt to access beyond end of device
[ 586.943560] sda8: rw=0, want=14153380784, limit=58605057
[ 586.943576] attempt to access beyond end of device
[ 586.943578] sda8: rw=0, want=15091304712, limit=58605057
[ 586.943581] attempt to access beyond end of device
[ 586.943583] sda8: rw=0, want=6233983792, limit=58605057
[ 586.943585] attempt to access beyond end of device
[ 586.943587] sda8: rw=0, want=4355876952, limit=58605057
[ 586.943590] attempt to access beyond end of device
[ 586.943592] sda8: rw=0, want=4358605680, limit=58605057
[ 586.943594] attempt to access beyond end of device
[ 586.943596] sda8: rw=0, want=15720459032, limit=58605057
[ 586.943599] attempt to access beyond end of device
[ 586.943601] sda8: rw=0, want=4347603872, limit=58605057
[ 586.943605] attempt to access beyond end of device
[ 586.943607] sda8: rw=0, want=16297194368, limit=58605057
[ 586.943610] attempt to access beyond end of device
[ 586.943611] sda8: rw=0, want=13610760456, limit=58605057
[ 586.943614] attempt to access beyond end of device
[ 586.943616] sda8: rw=0, want=15361704824, limit=58605057
[ 586.943619] attempt to access beyond end of device
[ 586.943621] sda8: rw=0, want=14556033808, limit=58605057
[ 586.943624] attempt to access beyond end of device
[ 586.943626] sda8: rw=0, want=14819238672, limit=58605057
[ 586.943628] attempt to access beyond end of device
[ 586.943630] sda8: rw=0, want=4311839552, limit=58605057
[ 586.943633] attempt to access beyond end of device
[ 586.943634] sda8: rw=0, want=6755068576, limit=58605057
[ 586.943637] attempt to access beyond end of device
[ 586.943639] sda8: rw=0, want=4355475720, limit=58605057
[ 586.943642] attempt to access beyond end of device
[ 586.943644] sda8: rw=0, want=13617054512, limit=58605057
[ 586.943646] attempt to access beyond end of device
[ 586.943648] sda8: rw=0, want=13474931576, limit=58605057
[ 586.943650] attempt to access beyond end of device
[ 586.943652] sda8: rw=0, want=4353401096, limit=58605057
[ 586.943655] attempt to access beyond end of device
[ 586.943657] sda8: rw=0, want=4353401096, limit=58605057
[ 589.059606] attempt to access beyond end of device
[ 589.059611] sda8: rw=0, want=4353401096, limit=58605057
----- end dmesg -----
----- begin lspci -----
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI
Controller (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=32]
Region 5: Memory at dbffe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/4 Enable+
Address: fee0f00c Data: 4179
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ahci
----- end lspci -----
----- begin hdparm -----
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG HD501LJ
Firmware Revision: CR100-11
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev
2.5
/dev/sdb:
ATA device, with non-removable media
Model Number: ST3300831AS
Firmware Revision: 3.02
----- end hdparm -----
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: AHCI errors on ICH10 board
2009-03-16 13:06 AHCI errors on ICH10 board Volker Lanz
@ 2009-03-16 15:06 ` Jeff Garzik
2009-03-16 17:57 ` Volker Lanz
0 siblings, 1 reply; 4+ messages in thread
From: Jeff Garzik @ 2009-03-16 15:06 UTC (permalink / raw)
To: Volker Lanz; +Cc: linux-ide
Volker Lanz wrote:
> ata1: SError: { Proto TrStaTrns UnrecFIS }
> ata1.00: cmd 60/00:00:4a:b6:60/02:00:0c:00:00/40 tag 0 ncq 262144 in
> res 51/84:00:4a:b6:60/4e:00:0c:00:00/40 Emask 0x412 (ATA bus error) <F>
> ata1.00: error: { ICRC ABRT }
Your hardware is telling you that it is seeing CRC errors on the ATA bus
-- which means to say, a hardware problem that causes data transfer over
the SATA cable to fail.
Possible sources of problems: bad SATA cable, bad power supply, bad
SATA port on device or mainboard, bad mainboard, ...
Jeff
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: AHCI errors on ICH10 board
2009-03-16 15:06 ` Jeff Garzik
@ 2009-03-16 17:57 ` Volker Lanz
2009-03-16 20:40 ` Jeff Garzik
0 siblings, 1 reply; 4+ messages in thread
From: Volker Lanz @ 2009-03-16 17:57 UTC (permalink / raw)
To: linux-ide; +Cc: Jeff Garzik
On Montag, 16. März 2009 16:06:46 Jeff Garzik wrote:
> Your hardware is telling you that it is seeing CRC errors on the ATA bus
> -- which means to say, a hardware problem that causes data transfer over
> the SATA cable to fail.
>
> Possible sources of problems: bad SATA cable, bad power supply, bad
> SATA port on device or mainboard, bad mainboard, ...
Faulty hardware is of course always possible. It's hard to imagine something
is wrong with the hardware in this case, though:
* Both drives are affected, a Samsung and a Seagate. We can rule out the
drives.
* Both drives worked in AHCI mode with the same cables and power supply with
the ICH9 based Gigabyte board: We can rule out the drives themselves again and
also the cables.
* Different SATA cables did not help. We can rule out the cables again.
* Unplugging everything in the machine except the drive with the root
partition and the video card did not help: We can rule out the power supply (a
high quality Tagan 400W model, not some OEM junk) with a near 100%
probability, I suppose.
So, all that's left is the mainboard. But on this same machine, AHCI in
Microsoft Windows XP works without any problem whatsoever. I know the old
Linux-stresses-your-hardware-more-than-Windows tale, but I haven't seen proof
of that for 10 years now. This finally seems to rule out the mainboard and at
least to me it appears the software side is all that is left.
What can I do to diagnose this further short of buying an additional power
supply and mainboard?
Volker
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: AHCI errors on ICH10 board
2009-03-16 17:57 ` Volker Lanz
@ 2009-03-16 20:40 ` Jeff Garzik
0 siblings, 0 replies; 4+ messages in thread
From: Jeff Garzik @ 2009-03-16 20:40 UTC (permalink / raw)
To: Volker Lanz; +Cc: linux-ide
Volker Lanz wrote:
> On Montag, 16. März 2009 16:06:46 Jeff Garzik wrote:
>> Your hardware is telling you that it is seeing CRC errors on the ATA bus
>> -- which means to say, a hardware problem that causes data transfer over
>> the SATA cable to fail.
>>
>> Possible sources of problems: bad SATA cable, bad power supply, bad
>> SATA port on device or mainboard, bad mainboard, ...
>
> Faulty hardware is of course always possible. It's hard to imagine something
> is wrong with the hardware in this case, though:
>
> * Both drives are affected, a Samsung and a Seagate. We can rule out the
> drives.
> * Both drives worked in AHCI mode with the same cables and power supply with
> the ICH9 based Gigabyte board: We can rule out the drives themselves again and
> also the cables.
> * Different SATA cables did not help. We can rule out the cables again.
> * Unplugging everything in the machine except the drive with the root
> partition and the video card did not help: We can rule out the power supply (a
> high quality Tagan 400W model, not some OEM junk) with a near 100%
> probability, I suppose.
>
> So, all that's left is the mainboard. But on this same machine, AHCI in
> Microsoft Windows XP works without any problem whatsoever. I know the old
I would double-check that you are using an AHCI driver in XP, since that
is uncommon. Most XP drivers for AHCI-capable hardware program the SATA
device in legacy IDE mode.
> Linux-stresses-your-hardware-more-than-Windows tale, but I haven't seen proof
> of that for 10 years now. This finally seems to rule out the mainboard and at
> least to me it appears the software side is all that is left.
> What can I do to diagnose this further short of buying an additional power
> supply and mainboard?
Well, the root cause of these errors are CRC errors during transmission
over the SATA cable. You can extrapolate from there... it could be
heat, poor cable shielding, dirty A/C power, bad RAM, who knows.
Your AHCI chip is telling Linux "hardware CRC error, that I could not
recover from" and Linux is dutifully reporting that back to you.
Software is unlikely as the cause, considering the volume of AHCI chips
in users hands versus the volume of bug reports like yours.
Every problem is different, of course, but the standard recommendations are
- trying different SATA ports on the mainboard. SATA ports are easy to
break or "fuzz" into uselessness
- replacing cables
- replacing the power supply
- running memtest86 or replacing RAM, etc.
- disabling AHCI mode
Mainboards can definitely go bad, but the above tends to be of more help.
Jeff
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-03-16 20:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-16 13:06 AHCI errors on ICH10 board Volker Lanz
2009-03-16 15:06 ` Jeff Garzik
2009-03-16 17:57 ` Volker Lanz
2009-03-16 20:40 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).