From: Jeff Garzik <jeff@garzik.org>
To: Florian Fainelli <florian@openwrt.org>
Cc: Phil Sutter <n0-1@freewrt.org>, Roel Kluin <roel.kluin@gmail.com>,
jgarzik@redhat.com, linux-ide@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] pata-rb532-cf: platform_get_irq() failure ignored
Date: Tue, 24 Mar 2009 22:16:43 -0400 [thread overview]
Message-ID: <49C9940B.5050704@garzik.org> (raw)
In-Reply-To: <200903131541.46648.florian@openwrt.org>
Florian Fainelli wrote:
> Hi,
>
> Le Friday 06 March 2009 17:43:18 Phil Sutter, vous avez écrit :
>> Hi,
>>
>> On Thu, Mar 05, 2009 at 07:23:22AM -0500, Jeff Garzik wrote:
>>> Roel Kluin wrote:
>>>> ------------------------------>8-------------8<-------------------------
>>>> -------- platform_get_irq() can return -ENXIO, but since 'irq' is an
>>>> unsigned int, it
>>>> does not show when the IRQ resource wasn't found.
>>>>
>>>> Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
>>>> ---
>>>> diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
>>>> index ebfcda2..fe8178c 100644
>>>> --- a/drivers/ata/pata_rb532_cf.c
>>>> +++ b/drivers/ata/pata_rb532_cf.c
>>>> @@ -173,11 +173,12 @@ static __devinit int
>>>> rb532_pata_driver_probe(struct platform_device *pdev)
>>>> return -EINVAL;
>>>> }
>>>>
>>>> - irq = platform_get_irq(pdev, 0);
>>>> - if (irq <= 0) {
>>>> + ret = platform_get_irq(pdev, 0);
>>>> + if (ret <= 0) {
>>>> dev_err(&pdev->dev, "no IRQ resource found\n");
>>>> return -ENOENT;
>>>> }
>>>> + irq = ret;
>>>>
>>>> gpio = irq_to_gpio(irq);
>>> ACK from Phil or Florian?
>> That's fine for me, though I didn't test it (I managed to break my
>> build-machine somehow, in an attempt to having the mainboard properly
>> grounded).
>>
>> One could simplify the patch by making the variable 'irq' be signed
>> instead of unsigned. This would also prevent "abusing" the variable
>> 'ret'. What do you think?
>
> I agree with this proposal, abusing the ret value is not that good. What about the patch below :
> --
> From: Florian Fainelli <florian@openwrt.org>
> Subject: [PATCH v2] pata-rb532-cf: platform_get_irq() failure ignored
>
> platform_get_irq() can return -ENXIO, but since 'irq' is an
> unsigned int, it does not show when the IRQ resource wasn't found.
> Make irq an int so that we can use a single variable to test the
> platform_get_irq() return value.
>
> Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
> Signed-off-by: Phil Sutter <n0-1@freewrt.org>
> Signed-off-by: Florian Fainelli <florian@openwrt.org>
> --
> diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
> index ebfcda2..da05518 100644
> --- a/drivers/ata/pata_rb532_cf.c
> +++ b/drivers/ata/pata_rb532_cf.c
> @@ -160,7 +160,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
>
> static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
> {
> - unsigned int irq;
> + int irq;
> int gpio;
> struct resource *res;
> struct ata_host *ah;
applied
prev parent reply other threads:[~2009-03-25 2:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-03 13:04 [PATCH] pata-rb532-cf: platform_get_irq() failure ignored Roel Kluin
2009-03-05 12:23 ` Jeff Garzik
2009-03-06 16:43 ` Phil Sutter
2009-03-13 14:41 ` Florian Fainelli
2009-03-14 0:51 ` Phil Sutter
2009-03-25 2:16 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C9940B.5050704@garzik.org \
--to=jeff@garzik.org \
--cc=akpm@linux-foundation.org \
--cc=florian@openwrt.org \
--cc=jgarzik@redhat.com \
--cc=linux-ide@vger.kernel.org \
--cc=n0-1@freewrt.org \
--cc=roel.kluin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).