From mboxrd@z Thu Jan 1 00:00:00 1970 From: Scott Wood Subject: Re: [PATCH 1/2] Added support for Designware SATA controller driver Date: Fri, 01 May 2009 16:26:10 -0500 Message-ID: <49FB68F2.10301@freescale.com> References: <1241211767-32697-1-git-send-email-fkan@amcc.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1241211767-32697-1-git-send-email-fkan@amcc.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linuxppc-dev-bounces+glppe-linuxppc-embedded-2=m.gmane.org@ozlabs.org Errors-To: linuxppc-dev-bounces+glppe-linuxppc-embedded-2=m.gmane.org@ozlabs.org To: Feng Kan Cc: Mark Miesfeld , linuxppc-dev@ozlabs.org, linux-ide@vger.kernel.org List-Id: linux-ide@vger.kernel.org Feng Kan wrote: > This adds support for the Designware SATA controller. > > Signed-off-by: Feng Kan > Signed-off-by: Mark Miesfeld > --- > drivers/ata/Kconfig | 10 + > drivers/ata/Makefile | 1 + > drivers/ata/sata_dwc.c | 2053 ++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 2064 insertions(+), 0 deletions(-) > create mode 100644 drivers/ata/sata_dwc.c > > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index 0bcf264..c3d0b24 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -72,6 +72,16 @@ config SATA_FSL > > If unsure, say N. > > +config SATA_DWC > + tristate "DesignWare Cores SATA support" > + depends on 460EX That "depends" looks too specific -- we don't want to grow a list if this controller gets added to other chips. Only depend on what this driver actually needs in order to function. -Scott