From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: [PATCH] sata_mv: use new sata phy register settings for new devices Date: Mon, 11 May 2009 14:34:16 -0400 Message-ID: <4A086FA8.4040102@garzik.org> References: <20090411160809.GA10922@deprecation.cyrius.com> <49E2EAEC.5030606@garzik.org> <20090504185850.GA11630@deprecation.cyrius.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from srv5.dvmed.net ([207.36.208.214]:51871 "EHLO mail.dvmed.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756769AbZEKSeX (ORCPT ); Mon, 11 May 2009 14:34:23 -0400 In-Reply-To: <20090504185850.GA11630@deprecation.cyrius.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Martin Michlmayr Cc: Mark Lord , Grant Grundler , Saeed Bishara , linux-ide@vger.kernel.org Martin Michlmayr wrote: > Mark, can this patch go in now? It's needed to make SATA operational > on my Kirkwood-based QNAP TS-219 with a Maxtor drive. > > > Subject: [PATCH] sata_mv: use new sata phy register settings for new devices > From: Saeed Bishara > > Marvell's new SoC (65 nano) needs different settings for its SATA > PHY registers. > > Tested-by: Martin Michlmayr > Signed-off-by: Saeed Bishara applied -- though I still await answers to maintainer Mark Lord's questions: was this tested with ATAPI and other features? (rhetorical question... if not... test it!)