linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: linux-ide@vger.kernel.org,
	"Andries E. Brouwer" <Andries.Brouwer@cwi.nl>,
	linux-kernel@vger.kernel.org,
	Robert Hancock <hancockrwd@gmail.com>,
	Al Viro <viro@zeniv.linux.org.uk>, Frans Pop <elendil@planet.nl>
Subject: Re: [PATCH 4/4] ide: preserve Host Protected Area by default
Date: Tue, 02 Jun 2009 23:12:15 +0400	[thread overview]
Message-ID: <4A25798F.3030700@ru.mvista.com> (raw)
In-Reply-To: <200906012333.29159.bzolnier@gmail.com>

Hello.

Bartlomiej Zolnierkiewicz wrote:

>>From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>>Subject: [PATCH] ide: preserve Host Protected Area by default

>>From the perspective of most users of recent systems, disabling Host
>>Protected Area (HPA) can break vendor RAID formats, GPT partitions and
>>risks corrupting firmware or overwriting vendor system recovery tools.

>>Unfortunately the original (kernels < 2.6.30) behavior (unconditionally
>>disabling HPA and using full disk capacity) was introduced at the time
>>when the main use of HPA was to make the drive look small enough for the
>>BIOS to allow the system to boot with large capacity drives.

>>Thus to allow the maximum compatibility with the existing setups (using
>>HPA and partitioned with HPA disabled) we automatically disable HPA if
>>any partitions overlapping HPA are detected.  Additionally HPA can also
>>be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0"
>>to disable HPA on /dev/hda).

>>While at it:
>>- remove stale "idebus=" entry from Documentation/kernel-parameters.txt

>>Cc: Robert Hancock <hancockrwd@gmail.com>
>>Cc: Frans Pop <elendil@planet.nl>
>>Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
>>Cc: Al Viro <viro@zeniv.linux.org.uk>
>>[patch description was based on input from Alan Cox and Frans Pop]
>>Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

> v2 interdiff

> v2:
> Fix ->resume HPA support.

> diff -u b/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
> --- b/drivers/ide/ide-disk.c
> +++ b/drivers/ide/ide-disk.c
> @@ -433,8 +433,11 @@
>  		goto out;
>  
>  	set = ide_disk_hpa_set_capacity(drive, set, lba48);
> -	if (set)
> +	if (set) {

    Well, this seems to be a useful check after all. :-)

> +		/* needed for ->resume to disable HPA */
> +		drive->dev_flags |= IDE_DFLAG_NOHPA;
>  		return set;
> +	}
>  out:
>  	return drive->capacity64;
>  }

MBR, Sergei

  reply	other threads:[~2009-06-02 19:10 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-31 14:39 [PATCH 0/4] partitions/ide: improve Host Protected Area handling Bartlomiej Zolnierkiewicz
2009-05-31 14:39 ` [PATCH 1/4] partitions: warn about the partition exceeding device capacity Bartlomiej Zolnierkiewicz
2009-05-31 14:39 ` [PATCH 2/4] partitions: add ->set_capacity block device method Bartlomiej Zolnierkiewicz
2009-06-06  8:42   ` Al Viro
2009-05-31 14:39 ` [PATCH 3/4] ide-gd: implement block device ->set_capacity method Bartlomiej Zolnierkiewicz
2009-06-01 21:32   ` Bartlomiej Zolnierkiewicz
2009-06-02 18:55     ` Sergei Shtylyov
2009-06-05 18:38       ` Bartlomiej Zolnierkiewicz
2009-05-31 14:39 ` [PATCH 4/4] ide: preserve Host Protected Area by default Bartlomiej Zolnierkiewicz
2009-06-01 21:33   ` Bartlomiej Zolnierkiewicz
2009-06-02 19:12     ` Sergei Shtylyov [this message]
2009-05-31 15:24 ` [PATCH 0/4] partitions/ide: improve Host Protected Area handling Andries E. Brouwer
2009-05-31 15:34   ` Bartlomiej Zolnierkiewicz
2009-06-01 13:02     ` Greg Freemyer
2009-05-31 16:36 ` Alan Cox
2009-05-31 20:04 ` Frans Pop
2009-05-31 22:50   ` Andries E. Brouwer
2009-06-01 12:59 ` Greg Freemyer
2009-06-01 13:06   ` Alan Cox
2009-06-01 22:00     ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A25798F.3030700@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=Andries.Brouwer@cwi.nl \
    --cc=bzolnier@gmail.com \
    --cc=elendil@planet.nl \
    --cc=hancockrwd@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).