From: Patrick Voegeli Olivera <patrick.voegeli@gmail.com>
To: "linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: Sata link_power_management_policy questions
Date: Tue, 23 Jun 2009 14:00:25 +0200 [thread overview]
Message-ID: <4A40C3D9.7060602@gmail.com> (raw)
In-Reply-To: <4A40643B.7090805@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 71 bytes --]
Here they go,
I attach them as log files, since dmesg is quite long.
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 45203 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-4 (root@patrick-laptop) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #1 SMP Mon Jun 22 21:31:14 CEST 2009
[ 0.000000] Command line: root=UUID=cfdbc761-596b-4edc-a3ec-a11daff9db1f ro quiet splash usbcore.autosuspend=0 pcie_aspm=force acpi_osi="Linux" resume=/dev/sda5 video.brightness_switch_enabled=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
[ 0.000000] BIOS-e820: 000000007f680000 - 000000007f690000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f690000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f680000 (usable)
[ 0.000000] modified: 000000007f680000 - 000000007f690000 (ACPI NVS)
[ 0.000000] modified: 000000007f690000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f680000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f680000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f680000 @ 8000-c000
[ 0.000000] RAMDISK: 37c3f000 - 37fef403
[ 0.000000] ACPI: RSDP 00000000000f7710 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000007f686f03 00094 (v01 FSC PC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000007f68eb96 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: Override [DSDT-S11_____], this is unsafe: tainting kernel
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] ACPI: DSDT @ 0x000000007f68838c Table override, replaced with:
[ 0.000000] ACPI: DSDT ffffffff80892990 06787 (v02 IEC___ S11_____ 06040000 INTL 20081204)
[ 0.000000] ACPI: FACS 000000007f68ffc0 00040
[ 0.000000] ACPI: APIC 000000007f68ec8a 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 000000007f68ecf2 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 000000007f68ed2a 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIT 000000007f68ed66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 000000007f68eda2 00032 (v01 Intel CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: TMOR 000000007f68edd4 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: SLIC 000000007f68edfa 00176 (v01 FSC PC 06040000 PTL_ 00000000)
[ 0.000000] ACPI: APIC 000000007f68ef70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000007f68efd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 000000007f6880af 002DD (v01 SataRe SataAhci 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007f687523 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007f68747d 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007f686f97 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007f680000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000af00b8] TEXT DATA BSS ==> [0000200000 - 0000af00b8]
[ 0.000000] #3 [0037c3f000 - 0037fef403] RAMDISK ==> [0037c3f000 - 0037fef403]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0000af1000 - 0000af116c] BRK ==> [0000af1000 - 0000af116c]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] found SMP MP-table at [ffff8800000f77a0] f77a0
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f680
[ 0.000000] On node 0 totalpages: 521754
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2389 pages reserved
[ 0.000000] DMA zone: 1549 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7079 pages used for memmap
[ 0.000000] DMA32 zone: 510681 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages at ffff880001010000, static data 72992 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 512230
[ 0.000000] Kernel command line: root=UUID=cfdbc761-596b-4edc-a3ec-a11daff9db1f ro quiet splash usbcore.autosuspend=0 pcie_aspm=force acpi_osi="Linux" resume=/dev/sda5 video.brightness_switch_enabled=0
[ 0.000000] PCIe ASPM is forcedly enabled
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:2304
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.547 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] allocated 20971520 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2020848k/2087424k available (4612k kernel code, 408k absent, 65516k reserved, 2352k data, 420k init)
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] HPET config register value = 0xFFFFFFFF. Disabling HPET
[ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.09 BogoMIPS (lpj=6650188)
[ 0.004047] Security Framework initialized
[ 0.004056] SELinux: Disabled at boot.
[ 0.004065] Mount-cache hash table entries: 256
[ 0.004248] Initializing cgroup subsys ns
[ 0.004253] Initializing cgroup subsys cpuacct
[ 0.004257] Initializing cgroup subsys memory
[ 0.004266] Initializing cgroup subsys freezer
[ 0.004282] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004285] CPU: L2 cache: 2048K
[ 0.004288] CPU: Physical Processor ID: 0
[ 0.004289] CPU: Processor Core ID: 0
[ 0.004293] using mwait in idle threads.
[ 0.004319] ACPI: Core revision 20090320
[ 0.012075] Setting APIC routing to flat
[ 0.012674] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054978] CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
[ 0.056001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3325.17 BogoMIPS (lpj=6650350)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.140419] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
[ 0.140449] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.144115] Brought up 2 CPUs
[ 0.144118] Total of 2 processors activated (6650.26 BogoMIPS).
[ 0.144167] CPU0 attaching sched-domain:
[ 0.144171] domain 0: span 0-1 level MC
[ 0.144173] groups: 0 1
[ 0.144179] CPU1 attaching sched-domain:
[ 0.144181] domain 0: span 0-1 level MC
[ 0.144184] groups: 1 0
[ 0.144264] net_namespace: 1872 bytes
[ 0.144289] Time: 11:52:54 Date: 06/23/09
[ 0.144289] NET: Registered protocol family 16
[ 0.144289] ACPI: bus type pci registered
[ 0.144295] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.144298] PCI: MCFG area at e0000000 reserved in E820
[ 0.148064] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.148066] PCI: Using configuration type 1 for base access
[ 0.148772] bio: create slab <bio-0> at 0
[ 0.148857] ACPI: EC: Look up EC in DSDT
[ 0.651312] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.652022] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.660026] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 1.160006] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1.168105] ACPI: Interpreter enabled
[ 1.168109] ACPI: (supports S0 S3 S4 S5)
[ 1.168141] ACPI: Using IOAPIC for interrupt routing
[ 1.898444] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.898447] ACPI: EC: driver started in poll mode
[ 1.898531] ACPI: Power Resource [FN00] (on)
[ 2.396326] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 2.396339] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 2.396446] pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff]
[ 2.396455] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 2.396461] pci 0000:00:02.0: reg 20 io port: [0x18f8-0x18ff]
[ 2.396508] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff]
[ 2.396623] pci 0000:00:1a.0: reg 20 io port: [0x1840-0x185f]
[ 2.396690] pci 0000:00:1a.1: reg 20 io port: [0x1860-0x187f]
[ 2.396761] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc406000-0xfc4063ff]
[ 2.396825] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 2.396831] pci 0000:00:1a.7: PME# disabled
[ 2.396885] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
[ 2.396947] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.396953] pci 0000:00:1b.0: PME# disabled
[ 2.397037] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.397043] pci 0000:00:1c.0: PME# disabled
[ 2.397129] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 2.397135] pci 0000:00:1c.1: PME# disabled
[ 2.397220] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.397226] pci 0000:00:1c.2: PME# disabled
[ 2.397292] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 2.397360] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 2.397425] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 2.397496] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc406400-0xfc4067ff]
[ 2.397559] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 2.397565] pci 0000:00:1d.7: PME# disabled
[ 2.397727] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 2.397734] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 2.397739] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 2.397743] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 000f)
[ 2.397748] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 000f)
[ 2.397801] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 2.397810] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 2.397818] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 2.397826] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 2.397834] pci 0000:00:1f.1: reg 20 io port: [0x1830-0x183f]
[ 2.397907] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
[ 2.397915] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
[ 2.397923] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
[ 2.397931] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
[ 2.397939] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
[ 2.397947] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc405000-0xfc4057ff]
[ 2.397990] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.397996] pci 0000:00:1f.2: PME# disabled
[ 2.398029] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 2.398055] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 2.398139] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 2.398145] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 2.398155] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 2.398235] pci 0000:04:00.0: reg 10 64bit mmio: [0xf8000000-0xf8003fff]
[ 2.398245] pci 0000:04:00.0: reg 18 io port: [0x3000-0x30ff]
[ 2.398280] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 2.398333] pci 0000:04:00.0: supports D1 D2
[ 2.398336] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.398342] pci 0000:04:00.0: PME# disabled
[ 2.404153] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 2.404160] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
[ 2.404170] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
[ 2.404312] pci 0000:06:00.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
[ 2.404548] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 2.404560] pci 0000:06:00.0: PME# disabled
[ 2.412246] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 2.412252] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
[ 2.412261] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
[ 2.412328] pci 0000:00:1e.0: transparent bridge
[ 2.412367] pci_bus 0000:00: on NUMA node 0
[ 2.412374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.412596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 2.412682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 2.412767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 2.412874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 2.427134] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 2.427261] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 2.427385] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 2.427508] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 2.427631] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.427754] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 2.427877] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.428010] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 2.428205] SCSI subsystem initialized
[ 2.428213] libata version 3.00 loaded.
[ 2.428213] usbcore: registered new interface driver usbfs
[ 2.428213] usbcore: registered new interface driver hub
[ 2.428213] usbcore: registered new device driver usb
[ 2.428213] ACPI: WMI: Mapper loaded
[ 2.428213] PCI: Using ACPI for IRQ routing
[ 2.440013] Bluetooth: Core ver 2.15
[ 2.440018] NET: Registered protocol family 31
[ 2.440019] Bluetooth: HCI device and connection manager initialized
[ 2.440022] Bluetooth: HCI socket layer initialized
[ 2.440025] NET: Registered protocol family 8
[ 2.440027] NET: Registered protocol family 20
[ 2.440041] NetLabel: Initializing
[ 2.440043] NetLabel: domain hash size = 128
[ 2.440045] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.440061] NetLabel: unlabeled traffic allowed by default
[ 2.440230] hpet clockevent registered
[ 2.440236] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 2.440242] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 2.440247] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 2.456562] pnp: PnP ACPI init
[ 2.456572] ACPI: bus type pnp registered
[ 2.940563] Switched to high resolution mode on CPU 1
[ 2.944012] Switched to high resolution mode on CPU 0
[ 3.072513] pnp: PnP ACPI: found 12 devices
[ 3.072516] ACPI: ACPI bus type pnp unregistered
[ 3.072527] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 3.072531] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 3.072535] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 3.072538] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 3.072541] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 3.072545] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 3.072548] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 3.072552] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 3.072561] system 00:05: ioport range 0x200-0x20f has been reserved
[ 3.072564] system 00:05: ioport range 0x400-0x40f has been reserved
[ 3.072567] system 00:05: ioport range 0x680-0x69f has been reserved
[ 3.072571] system 00:05: ioport range 0x800-0x80f has been reserved
[ 3.072574] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 3.072578] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 3.072581] system 00:05: ioport range 0x1640-0x164f has been reserved
[ 3.072585] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 3.072591] system 00:06: ioport range 0x6a0-0x6af has been reserved
[ 3.072594] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 3.077328] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 3.077332] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 3.077339] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
[ 3.077344] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 3.077353] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 3.077357] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 3.077363] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
[ 3.077369] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 3.077377] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 3.077380] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 3.077387] pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
[ 3.077392] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
[ 3.077401] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 3.077403] pci 0000:00:1e.0: IO window: disabled
[ 3.077408] pci 0000:00:1e.0: MEM window: disabled
[ 3.077413] pci 0000:00:1e.0: PREFETCH window: disabled
[ 3.077427] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 3.077435] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.077442] pci 0000:00:1c.0: setting latency timer to 64
[ 3.077452] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 3.077458] pci 0000:00:1c.1: setting latency timer to 64
[ 3.077466] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 3.077471] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.077478] pci 0000:00:1c.2: setting latency timer to 64
[ 3.077485] pci 0000:00:1e.0: setting latency timer to 64
[ 3.077490] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 3.077493] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 3.077496] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 3.077499] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
[ 3.077502] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 3.077505] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 3.077507] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 3.077510] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[ 3.077513] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 3.077515] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
[ 3.077518] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
[ 3.077521] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 3.077523] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 3.077554] NET: Registered protocol family 2
[ 3.113066] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.113597] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 3.116562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.117324] TCP: Hash tables configured (established 262144 bind 65536)
[ 3.117328] TCP reno registered
[ 3.129146] NET: Registered protocol family 1
[ 3.129226] Trying to unpack rootfs image as initramfs...
[ 3.237095] Freeing initrd memory: 3777k freed
[ 3.239840] Simple Boot Flag at 0x36 set to 0x1
[ 3.239995] Scanning for low memory corruption every 60 seconds
[ 3.240178] audit: initializing netlink socket (disabled)
[ 3.240201] type=2000 audit(1245757977.237:1): initialized
[ 3.250004] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.251436] VFS: Disk quotas dquot_6.5.2
[ 3.251500] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.251952] fuse init (API version 7.11)
[ 3.252040] msgmni has been set to 3955
[ 3.252332] alg: No test for stdrng (krng)
[ 3.252342] io scheduler noop registered
[ 3.252345] io scheduler anticipatory registered
[ 3.252347] io scheduler deadline registered
[ 3.252360] io scheduler cfq registered (default)
[ 3.252374] pci 0000:00:02.0: Boot video device
[ 3.252660] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 3.252678] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.252846] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 3.252863] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 3.253035] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 3.253053] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 3.308105] ACPI: AC Adapter [ADP1] (on-line)
[ 3.308197] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.308201] ACPI: Power Button [PWRF]
[ 3.308258] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.364068] ACPI: Lid Switch [LID0]
[ 3.364124] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.364127] ACPI: Sleep Button [SLPB]
[ 3.364175] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.364178] ACPI: Power Button [PWRB]
[ 3.364401] fan PNP0C0B:00: registered as cooling_device0
[ 3.364407] ACPI: Fan [FAN0] (on)
[ 3.364864] acpi device:07: registered as cooling_device1
[ 3.364986] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/input/input4
[ 3.364990] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.365472] ACPI: SSDT 000000007f687df1 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 3.365969] ACPI: SSDT 000000007f687782 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 3.368369] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
[ 3.368738] Monitor-Mwait will be used to enter C-1 state
[ 3.368762] Monitor-Mwait will be used to enter C-2 state
[ 3.368771] Marking TSC unstable due to TSC halts in idle
[ 3.368788] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 3.368809] processor ACPI_CPU:00: registered as cooling_device2
[ 3.368813] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.369217] ACPI: SSDT 000000007f687fe7 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 3.369573] ACPI: SSDT 000000007f687d6c 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 3.370201] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
[ 3.370664] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 3.370685] processor ACPI_CPU:01: registered as cooling_device3
[ 3.370690] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.982747] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.982758] ACPI: Thermal Zone [TZ00] (27 C)
[ 3.983221] ACPI: Invalid active1 threshold
[ 3.983492] ACPI: Device [FAN0] failed to transition to D3
[ 3.983498] thermal LNXTHERM:02: registered as thermal_zone1
[ 3.983508] ACPI: Thermal Zone [TZ01] (32 C)
[ 3.984641] Linux agpgart interface v0.103
[ 3.984657] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 3.985297] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 3.988176] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.988232] [drm] Initialized drm 1.1.0 20060810
[ 3.988254] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.988259] i915 0000:00:02.0: setting latency timer to 64
[ 3.994970] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 4.044104] ACPI: Battery Slot [BAT0] (battery absent)
[ 4.104076] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.149847] [drm] TV-15: set mode NTSC 480i 0
[ 5.286998] allocated 1280x800 fb: 0x007df000, bo ffff88007db1b480
[ 5.360524] [drm] LVDS-8: set mode 1280x800 17
[ 5.612194] Console: switching to colour frame buffer device 160x50
[ 5.615592] fb0: inteldrmfb frame buffer device
[ 5.615594] registered panic notifier
[ 5.615601] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.615636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.615757] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.616136] 00:08: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
[ 5.616988] brd: module loaded
[ 5.617371] loop: module loaded
[ 5.617422] Driver 'sd' needs updating - please use bus_type methods
[ 5.617433] Driver 'sr' needs updating - please use bus_type methods
[ 5.617477] ahci 0000:00:1f.2: version 3.0
[ 5.617496] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.617541] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 5.617602] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 5.617606] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part
[ 5.617612] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.617841] scsi0 : ahci
[ 5.617939] scsi1 : ahci
[ 5.618000] scsi2 : ahci
[ 5.618122] ata1: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405100 irq 28
[ 5.618126] ata2: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405180 irq 28
[ 5.618129] ata3: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405200 irq 28
[ 5.618166] ata_piix 0000:00:1f.1: version 2.13
[ 5.618175] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.618212] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5.618284] scsi3 : ata_piix
[ 5.618347] scsi4 : ata_piix
[ 5.618994] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
[ 5.618998] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
[ 5.619091] PPP generic driver version 2.4.2
[ 5.619211] usbcore: registered new interface driver libusual
[ 5.619258] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.622730] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 5.625364] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.625370] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 5.625374] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 5.625377] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 5.625381] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 5.625431] mice: PS/2 mouse device common for all mice
[ 5.625667] cpuidle: using governor ladder
[ 5.625763] cpuidle: using governor menu
[ 5.626140] TCP cubic registered
[ 5.626270] NET: Registered protocol family 10
[ 5.626732] lo: Disabled Privacy Extensions
[ 5.627037] NET: Registered protocol family 17
[ 5.627045] Bluetooth: L2CAP ver 2.13
[ 5.627047] Bluetooth: L2CAP socket layer initialized
[ 5.627050] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.627052] Bluetooth: SCO socket layer initialized
[ 5.627084] Bluetooth: RFCOMM socket layer initialized
[ 5.627093] Bluetooth: RFCOMM TTY layer initialized
[ 5.627094] Bluetooth: RFCOMM ver 1.11
[ 5.627797] TuxOnIce 3.0.1 (http://tuxonice.net)
[ 5.661814] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 5.796365] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L632H, fs03, max UDMA/33
[ 5.828274] ata4.00: configured for UDMA/33
[ 5.936064] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.936087] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.936114] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.936790] ACPI Warning (nspredef-0943): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20090320]
[ 5.936803] ata1.00: _GTF unexpected object type 0x1
[ 5.986155] ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[ 5.986161] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.987219] ata1.00: _GTF unexpected object type 0x1
[ 5.987362] ata1.00: configured for UDMA/133
[ 5.987548] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
[ 5.987737] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.987835] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 5.987862] sd 0:0:0:0: [sda] Write Protect is off
[ 5.987867] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.987906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.988077] sda:<5>scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H fs03 PQ: 0 ANSI: 5
[ 5.992413] sda1 sda2 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.007274] Uniform CD-ROM driver Revision: 3.20
[ 6.007395] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 6.007468] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 6.008782] sda5 sda6 sda7 >
[ 6.042781] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.198508] TuxOnIce: Normal swapspace found.
[ 6.199013] PM: Checking image partition /dev/sda5
[ 6.199030] PM: Resume from partition 8:5
[ 6.199033] PM: Checking hibernation image.
[ 6.199246] PM: Resume from disk failed.
[ 6.199271] registered taskstats version 1
[ 6.199473] Magic number: 13:233:884
[ 6.199560] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.199564] EDD information not available.
[ 6.199674] Freeing unused kernel memory: 420k freed
[ 6.199904] Write protecting the kernel read-only data: 6464k
[ 6.343403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.343451] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.343477] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 6.343484] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 6.343617] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 6.347548] ehci_hcd 0000:00:1a.7: debug port 1
[ 6.347558] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 6.347586] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc406000
[ 6.360025] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 6.360152] usb usb1: configuration #1 chosen from 1 choice
[ 6.360204] hub 1-0:1.0: USB hub found
[ 6.360216] hub 1-0:1.0: 4 ports detected
[ 6.360392] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.360410] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.360416] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.360493] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 6.364398] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.364407] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 6.364427] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc406400
[ 6.380021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.380132] usb usb2: configuration #1 chosen from 1 choice
[ 6.380184] hub 2-0:1.0: USB hub found
[ 6.380195] hub 2-0:1.0: 6 ports detected
[ 6.387152] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.387278] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.387291] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.387298] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 6.387416] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 6.387469] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[ 6.387616] usb usb3: configuration #1 chosen from 1 choice
[ 6.387668] hub 3-0:1.0: USB hub found
[ 6.387679] hub 3-0:1.0: 2 ports detected
[ 6.387835] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 6.387846] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 6.387852] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 6.387938] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 6.387981] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
[ 6.388135] usb usb4: configuration #1 chosen from 1 choice
[ 6.388185] hub 4-0:1.0: USB hub found
[ 6.388195] hub 4-0:1.0: 2 ports detected
[ 6.388342] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.388353] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.388359] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.388435] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 6.388469] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 6.388596] usb usb5: configuration #1 chosen from 1 choice
[ 6.388645] hub 5-0:1.0: USB hub found
[ 6.388654] hub 5-0:1.0: 2 ports detected
[ 6.388787] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.388797] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.388802] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.388883] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 6.388927] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 6.389058] usb usb6: configuration #1 chosen from 1 choice
[ 6.389105] hub 6-0:1.0: USB hub found
[ 6.389115] hub 6-0:1.0: 2 ports detected
[ 6.389252] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.389262] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.389268] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.389344] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 6.389381] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 6.389509] usb usb7: configuration #1 chosen from 1 choice
[ 6.389555] hub 7-0:1.0: USB hub found
[ 6.389565] hub 7-0:1.0: 2 ports detected
[ 6.672045] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 6.811250] usb 1-2: configuration #1 chosen from 1 choice
[ 6.902825] PM: Starting manual resume from disk
[ 6.903294] PM: Resume from partition 8:5
[ 6.903297] PM: Checking hibernation image.
[ 6.903464] PM: Resume from disk failed.
[ 6.916977] EXT4-fs: barriers enabled
[ 6.920037] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 6.924385] kjournald2 starting: pid 782, dev sda1:8, commit interval 5 seconds
[ 6.924417] EXT4-fs: delayed allocation enabled
[ 6.924421] EXT4-fs: file extents enabled
[ 6.924513] EXT4-fs: mballoc enabled
[ 6.924537] EXT4-fs: mounted filesystem sda1 with ordered data mode
[ 7.157406] usb 1-3: configuration #1 chosen from 1 choice
[ 7.680033] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 7.926201] usb 4-2: configuration #1 chosen from 1 choice
[ 8.168046] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 8.347650] usb 5-1: configuration #1 chosen from 1 choice
[ 13.119934] udev: starting version 141
[ 13.747369] sky2 driver version 1.22
[ 13.747430] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.747449] sky2 0000:04:00.0: setting latency timer to 64
[ 13.747484] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 13.747629] sky2 0000:04:00.0: irq 29 for MSI/MSI-X
[ 13.748762] sky2 eth0: addr 00:a0:d1:cc:91:17
[ 13.780112] cfg80211: Calling CRDA to update world regulatory domain
[ 13.802115] cfg80211: World regulatory domain updated:
[ 13.802121] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.802127] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.802133] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.802138] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.802143] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.802148] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.818981] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 13.849607] usbcore: registered new interface driver hiddev
[ 13.854072] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7
[ 13.854225] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 13.859707] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input8
[ 13.859888] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 13.859922] usbcore: registered new interface driver usbhid
[ 13.859927] usbhid: v2.6:USB HID core driver
[ 13.872666] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 13.872818] usbcore: registered new interface driver btusb
[ 14.016162] Linux video capture interface: v2.00
[ 14.417227] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000
[ 14.446994] uvcvideo: Found UVC 1.00 device FO13FF-65-1 PC-CAM (05c8:0103)
[ 14.448879] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 14.450581] input: FO13FF-65-1 PC-CAM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input10
[ 14.450701] usbcore: registered new interface driver uvcvideo
[ 14.450707] USB Video Class driver (v0.1.0)
[ 14.620665] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 14.620672] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 14.620802] iwl3945 0000:06:00.0: enabling device (0104 -> 0106)
[ 14.620817] iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.620834] iwl3945 0000:06:00.0: setting latency timer to 64
[ 14.675882] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 14.675888] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 14.676275] iwl3945 0000:06:00.0: irq 30 for MSI/MSI-X
[ 14.806287] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 14.913080] HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
[ 14.913093] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.913132] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.019837] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 15.272891] Adding 4883720k swap on /dev/sda5. Priority:-1 extents:1 across:4883720k
[ 15.949656] EXT4 FS on sda1, internal journal on sda1:8
[ 16.912678] EXT4-fs: barriers enabled
[ 16.935316] kjournald2 starting: pid 2050, dev sda6:8, commit interval 5 seconds
[ 16.935553] EXT4 FS on sda6, internal journal on sda6:8
[ 16.935557] EXT4-fs: delayed allocation enabled
[ 16.935561] EXT4-fs: file extents enabled
[ 16.935855] EXT4-fs: mballoc enabled
[ 16.935879] EXT4-fs: mounted filesystem sda6 with ordered data mode
[ 19.148742] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.148746] Bluetooth: BNEP filters: protocol multicast
[ 19.483228] [drm] TV-15: set mode NTSC 480i 0
[ 19.648300] [drm] TV-15: set mode NTSC 480i 0
[ 19.749192] Bridge firewalling registered
[ 20.121349] [drm] TV-15: set mode NTSC 480i 0
[ 20.286793] [drm] TV-15: set mode NTSC 480i 0
[ 23.005269] sky2 eth0: enabling interface
[ 23.005726] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.006811] iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 23.119883] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[ 23.186044] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.386392] atkbd.c: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0).
[ 28.386399] atkbd.c: Use 'setkeycodes e003 <keycode>' to make it known.
[ 29.136135] [drm] TV-15: set mode NTSC 480i 0
[ 29.302138] [drm] TV-15: set mode NTSC 480i 0
[ 29.791540] [drm] TV-15: set mode NTSC 480i 0
[ 29.956983] [drm] TV-15: set mode NTSC 480i 0
[ 30.447346] [drm] TV-15: set mode NTSC 480i 0
[ 30.613257] [drm] TV-15: set mode NTSC 480i 0
[ 33.519410] [drm] TV-15: set mode NTSC 480i 0
[ 33.685521] [drm] TV-15: set mode NTSC 480i 0
[ 38.255058] wlan0: authenticate with AP 00:12:bf:1d:d6:6e
[ 38.256764] wlan0: authenticated
[ 38.256768] wlan0: associate with AP 00:12:bf:1d:d6:6e
[ 38.258993] wlan0: RX AssocResp from 00:12:bf:1d:d6:6e (capab=0x431 status=0 aid=3)
[ 38.259000] wlan0: associated
[ 38.260665] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.420024] wlan0: no IPv6 routers present
[-- Attachment #3: hdparm.log --]
[-- Type: text/x-log, Size: 2730 bytes --]
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD1200BEVS-22UST0
Serial Number: WD-WXEX07E49571
Firmware Revision: 01.01A01
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 234441648
LBA48 user addressable sectors: 234441648
device size with M = 1024*1024: 114473 MBytes
device size with M = 1000*1000: 120034 MBytes (120 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 200
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
48min for SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee256053632
NAA : 5
IEEE OUI : 14ee
Unique ID : 256053632
Checksum: correct
next prev parent reply other threads:[~2009-06-23 12:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4A3FD261.7060903@gmail.com>
2009-06-23 5:12 ` Sata link_power_management_policy questions Robert Hancock
2009-06-23 12:00 ` Patrick Voegeli Olivera [this message]
2009-06-24 0:51 ` Robert Hancock
2009-06-24 8:39 ` Patrick Voegeli Olivera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A40C3D9.7060602@gmail.com \
--to=patrick.voegeli@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).