From: Robert Hancock <hancockrwd@gmail.com>
To: Allan Wind <allan_wind@lifeintegrity.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
Date: Wed, 29 Jul 2009 13:43:06 -0600 [thread overview]
Message-ID: <4A70A64A.2070605@gmail.com> (raw)
In-Reply-To: <20090727060322.GB27002@lifeintegrity.com>
On 07/27/2009 12:03 AM, Allan Wind wrote:
> I have a pair of Western Digital RE4-GP (WD2002FYPS) in RAID1 configuration
> using Linux 2.6.30.3 and seeing the following:
>
> [ 4907.485324] end_request: I/O error, dev sdb, sector 3907028974
Are there no error messages before this point? Can you post the full
dmesg output from bootup?
> [ 4907.485543] md: super_written gets error=-5, uptodate=0
> [ 4907.485546] raid1: Disk failure on sdb2, disabling device.
> [ 4907.485547] raid1: Operation continuing on 1 devices.
> [ 4907.499157] RAID1 conf printout:
> [ 4907.499159] --- wd:1 rd:2
> [ 4907.499162] disk 0, wo:0, o:1, dev:sda2
> [ 4907.499164] disk 1, wo:1, o:0, dev:sdb2
> [ 4907.503037] RAID1 conf printout:
> [ 4907.503039] --- wd:1 rd:2
> [ 4907.503041] disk 0, wo:0, o:1, dev:sda2
> [ 6705.292961] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6705.292967] Descriptor sense data with sense descriptors (in hex):
> [ 6705.292970] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6705.292978] 00 4f 00 c2 00 50
> [ 6705.292983] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6705.359497] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6705.359502] Descriptor sense data with sense descriptors (in hex):
> [ 6705.359504] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6705.359513] 00 4f 00 c2 00 50
> [ 6705.359517] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6724.022616] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6724.022622] Descriptor sense data with sense descriptors (in hex):
> [ 6724.022624] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6724.022633] 00 4f 00 c2 00 50
> [ 6724.022638] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6724.078063] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6724.078068] Descriptor sense data with sense descriptors (in hex):
> [ 6724.078070] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6724.078079] 00 4f 00 c2 00 50
> [ 6724.078083] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6740.035419] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6740.035425] Descriptor sense data with sense descriptors (in hex):
> [ 6740.035427] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6740.035435] 00 4f 00 c2 00 50
> [ 6740.035440] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6740.090867] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6740.090872] Descriptor sense data with sense descriptors (in hex):
> [ 6740.090874] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6740.090882] 00 4f 00 c2 00 50
> [ 6740.090887] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6812.955958] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 6812.955965] Descriptor sense data with sense descriptors (in hex):
> [ 6812.955967] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6812.955976] 00 4f 00 c2 00 50
> [ 6812.955980] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 6813.011403] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 6813.011408] Descriptor sense data with sense descriptors (in hex):
> [ 6813.011410] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6813.011419] 00 4f 00 c2 00 50
> [ 6813.011423] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 6818.944137] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 6818.944143] Descriptor sense data with sense descriptors (in hex):
> [ 6818.944146] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6818.944154] 00 4f 00 c2 00 50
> [ 6818.944159] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 6818.999583] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 6818.999587] Descriptor sense data with sense descriptors (in hex):
> [ 6818.999590] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6818.999598] 00 4f 00 c2 00 50
> [ 6818.999602] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7036.061540] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 7036.061547] Descriptor sense data with sense descriptors (in hex):
> [ 7036.061549] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7036.061558] 00 4f 00 c2 00 50
> [ 7036.061562] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 7036.116986] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 7036.116991] Descriptor sense data with sense descriptors (in hex):
> [ 7036.116993] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7036.117001] 00 4f 00 c2 00 50
> [ 7036.117006] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 7042.247767] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 7042.247773] Descriptor sense data with sense descriptors (in hex):
> [ 7042.247776] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7042.247784] 00 4f 00 c2 00 50
> [ 7042.247789] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7042.303215] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 7042.303219] Descriptor sense data with sense descriptors (in hex):
> [ 7042.303221] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7042.303230] 00 4f 00 c2 00 50
> [ 7042.303234] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7048.136156] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 7048.136162] Descriptor sense data with sense descriptors (in hex):
> [ 7048.136165] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7048.136174] 00 4f 00 c2 00 50
> [ 7048.136178] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7048.191599] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 7048.191604] Descriptor sense data with sense descriptors (in hex):
> [ 7048.191606] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7048.191614] 00 4f 00 c2 00 50
> [ 7048.191619] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7051.153936] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 7051.153942] Descriptor sense data with sense descriptors (in hex):
> [ 7051.153944] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7051.153953] 00 4f 00 c2 00 50
> [ 7051.153958] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 7051.209384] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 7051.209388] Descriptor sense data with sense descriptors (in hex):
> [ 7051.209390] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7051.209399] 00 4f 00 c2 00 50
> [ 7051.209403] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
>
> SMART suggest the drives are fine:
>
> pawan:/var/log# smartctl -l error /dev/sda
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF READ SMART DATA SECTION ===
> SMART Error Log Version: 1
> No Errors Logged
>
> pawan:/var/log# smartctl -l error /dev/sdb
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF READ SMART DATA SECTION ===
> SMART Error Log Version: 1
> No Errors Logged
>
> I disabled NCQ per instructions at:
> http://linux-ata.org/faq.html#ncq
> Btw, is there a better way than writing a init.d script for tweaking NCQ at
> reboot?
>
> Any ideas?
>
>
> /Allan
next prev parent reply other threads:[~2009-07-29 19:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-27 6:03 LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key Allan Wind
2009-07-29 19:43 ` Robert Hancock [this message]
2009-07-29 20:07 ` Allan Wind
2009-07-29 23:04 ` Robert Hancock
2009-07-31 18:40 ` Allan Wind
2009-08-03 5:08 ` Allan Wind
2009-08-03 14:34 ` James Bottomley
2009-08-03 16:06 ` Allan Wind
2009-08-03 16:15 ` James Bottomley
2009-08-26 21:17 ` Allan Wind
2009-09-11 6:20 ` Jeppe Oland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A70A64A.2070605@gmail.com \
--to=hancockrwd@gmail.com \
--cc=allan_wind@lifeintegrity.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).