linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <teheo@novell.com>
To: Jeff Garzik <jgarzik@pobox.com>, ide <linux-ide@vger.kernel.org>,
	meissner@novell.com
Subject: [PATCH 3/4 #upstream-fixes] libata: make gtf_filter per-dev
Date: Tue, 04 Aug 2009 17:53:44 +0900	[thread overview]
Message-ID: <4A77F718.7040703@novell.com> (raw)
In-Reply-To: <4A77F6E4.6070800@novell.com>

Add ->gtf_filter to ata_device and set it to ata_acpi_gtf_filter when
initializing ata_link.  This is to allow quirks which apply different
gtf filters.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ata/libata-acpi.c |   17 +++++++++--------
 drivers/ata/libata-core.c |    3 +++
 drivers/ata/libata.h      |    2 ++
 include/linux/libata.h    |    1 +
 4 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 6ea9d02..bc6d32e 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -20,7 +20,7 @@
 
 #include <acpi/acpi_bus.h>
 
-static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
 module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
 MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
 
@@ -603,10 +603,11 @@ static void ata_acpi_gtf_to_tf(struct ata_device *dev,
 	tf->command = gtf->tf[6];	/* 0x1f7 */
 }
 
-static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+static int ata_acpi_filter_tf(struct ata_device *dev,
+			      const struct ata_taskfile *tf,
 			      const struct ata_taskfile *ptf)
 {
-	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+	if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
 		/* libata doesn't use ACPI to configure transfer mode.
 		 * It will only confuse device configuration.  Skip.
 		 */
@@ -615,7 +616,7 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
 			return 1;
 	}
 
-	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+	if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
 		/* BIOS writers, sorry but we don't wanna lock
 		 * features unless the user explicitly said so.
 		 */
@@ -640,18 +641,18 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
 	if (tf->command == ATA_CMD_SET_FEATURES &&
 	    tf->feature == SETFEATURES_SATA_ENABLE) {
 		/* inhibit enabling DIPM */
-		if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM &&
+		if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
 		    tf->nsect == SATA_DIPM)
 			return 1;
 
 		/* inhibit FPDMA non-zero offset */
-		if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+		if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
 		    (tf->nsect == SATA_FPDMA_OFFSET ||
 		     tf->nsect == SATA_FPDMA_IN_ORDER))
 			return 1;
 
 		/* inhibit FPDMA auto activation */
-		if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+		if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
 		    tf->nsect == SATA_FPDMA_AA)
 			return 1;
 	}
@@ -704,7 +705,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 		pptf = &ptf;
 	}
 
-	if (!ata_acpi_filter_tf(&tf, pptf)) {
+	if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
 		rtf = tf;
 		err_mask = ata_exec_internal(dev, &rtf, NULL,
 					     DMA_NONE, NULL, 0, 0);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8ac98ff..d3ba7bd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5560,6 +5560,9 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
 
 		dev->link = link;
 		dev->devno = dev - link->device;
+#ifdef CONFIG_ATA_ACPI
+		dev->gtf_filter = ata_acpi_gtf_filter;
+#endif
 		ata_dev_init(dev);
 	}
 }
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 89a1e00..ab8ae14 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -118,6 +118,8 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
 
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
+extern unsigned int ata_acpi_gtf_filter;
+
 extern void ata_acpi_associate_sata_port(struct ata_port *ap);
 extern void ata_acpi_associate(struct ata_host *host);
 extern void ata_acpi_dissociate(struct ata_host *host);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index c7938f7..28b112d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -597,6 +597,7 @@ struct ata_device {
 #ifdef CONFIG_ATA_ACPI
 	acpi_handle		acpi_handle;
 	union acpi_object	*gtf_cache;
+	unsigned int		gtf_filter;
 #endif
 	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
 	u64			n_sectors;	/* size of device, if ATA */
-- 
1.6.0.2


  reply	other threads:[~2009-08-04  8:53 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-04  8:52 [PATCH 1/4 #upstream-fixes] libata: cosmetic updates Tejun Heo
2009-08-04  8:52 ` [PATCH 2/4 #upstream-fixes] libata: implement more acpi filtering options Tejun Heo
2009-08-04  8:53   ` Tejun Heo [this message]
2009-08-04  8:57     ` [PATCH 4/4 #upstream-fixes] ahci: filter FPDMA non-zero offset enable for Aspire 3810T Tejun Heo
2009-09-09  1:20 ` [PATCH 1/4 #upstream-fixes] libata: cosmetic updates Jeff Garzik
2009-09-15 19:16   ` [PATCH REDIFFED 1/4 #upstream] " Tejun Heo
2009-10-06  4:25     ` Jeff Garzik
2009-09-15 19:17   ` [PATCH REDIFFED 2/4 #upstream] libata: implement more acpi filtering options Tejun Heo
2009-10-06  4:56     ` Jeff Garzik
2009-09-15 19:17   ` [PATCH REDIFFED 3/4 #upstream] libata: make gtf_filter per-dev Tejun Heo
2009-09-15 19:18   ` [PATCH REDIFFED 4/4 #upstream] ahci: filter FPDMA non-zero offset enable for Aspire 3810T Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A77F718.7040703@novell.com \
    --to=teheo@novell.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=meissner@novell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).