* Re: HighPoint RocketRAID 2320
2009-08-05 3:58 ` Tejun Heo
@ 2009-08-05 21:01 ` Davíð Steinn Geirsson
2009-08-05 22:35 ` Mark Lord
2009-08-05 22:40 ` Mark Lord
0 siblings, 2 replies; 18+ messages in thread
From: Davíð Steinn Geirsson @ 2009-08-05 21:01 UTC (permalink / raw)
To: Tejun Heo; +Cc: Mark Lord, linux-ide
[-- Attachment #1.1: Type: text/plain, Size: 1393 bytes --]
Hi guys,
On Wed, Aug 05, 2009 at 12:58:10PM +0900, Tejun Heo wrote:
> Mark Lord wrote:
> > Mark Lord wrote:
> >> Davíð Steinn Geirsson wrote:
> >>> Hi Tejun,
> >>>
> >>> I tried this and attach a dmesg output. The result was the same.
> >> ..
> >> Mmm... interrupts are not getting through the bridge chip.
> > ..
> >
> > This is just a blind shot in the dark, but easy enough to try:
> >
> > How about booting with pci=nomsi on the kernel command line ?
>
> And if that fails irqpoll. :-)
Neither of those options seems to have an effect. I did however
make some progress fiddling further with kernel options:
If I disable the APIC (noapic), I am able to read (correct) data off
the disks, albeit very slowly due to repeated DMA and NCQ errors (took about 4
minutes to transfer 88KB).
If I further disable DMA and NCQ (libata.dma=0 and libata.force=noncq),
I get no errors in my logs and can transfer data at a reasonable rate
considering it's PIO.
So, at least we're moving somewhere, though I really don't understand
how the APIC would be handling the interrupts any differently than the
standard PIC.
I'm attaching the dmesg output from these tries (pci=nomsi and irqpoll
which did not work, and with noapic with and without DMA).
>
> --
> tejun
Kind regards and thanks for all your help,
--
Davíð Steinn Geirsson
david@dsg.to
[-- Attachment #1.2: sata_mv-dmesg.noapic.noncq.nodma-working.log --]
[-- Type: text/plain, Size: 50813 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-btrfsnewformat2 (2.6.30) (root@slimer) (gcc version 4.3.3 (Debian 4.3.3-15) ) #3 SMP Mon Aug 3 18:09:53 GMT 2009
[ 0.000000] Command line: root=/dev/mapper/slimerroot-root ro noapic libata.force=noncq libata.dma=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffc0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffc0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffc0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ 14000-1c000
[ 0.000000] RAMDISK: 37753000 - 37fef542
[ 0.000000] ACPI: RSDP 00000000000fb800 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffc0100 00054 (v01 A_M_I_ OEMXSDT 09000710 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffc0290 000F4 (v03 A_M_I_ OEMFACP 09000710 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffc05c0 051BD (v01 A0653 A0653000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 00000000cffce000 00040
[ 0.000000] ACPI: APIC 00000000cffc0390 00070 (v01 A_M_I_ OEMAPIC 09000710 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffc0400 0003C (v01 A_M_I_ OEMMCFG 09000710 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffce040 00060 (v01 A_M_I_ AMI_OEM 09000710 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffc5780 00038 (v01 A_M_I_ OEMHPET0 09000710 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffc57c0 00248 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [0000000000017000 - 000000000001efff]
[ 0.000000] bootmap [000000000001f000 - 0000000000054fff] pages 36
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d38cc] TEXT DATA BSS ==> [0000200000 - 00007d38cc]
[ 0.000000] #3 [0037753000 - 0037fef542] RAMDISK ==> [0037753000 - 0037fef542]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00007d4000 - 00007d4290] BRK ==> [00007d4000 - 00007d4290]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000017000] PGTABLE ==> [0000014000 - 0000017000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20005ffffff] PMD -> [ffff880028200000-ffff88002d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000cffc0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572683
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1601 pages reserved
[ 0.000000] DMA zone: 2322 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833528 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: TEMPLATE
[ 0.000000] MPTABLE: Product ID: 1394
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000
[ 0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028034000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1546890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/slimerroot-root ro noapic libata.force=noncq libata.dma=0
[ 0.000000] Unknown boot option `libata.force=noncq': ignoring
[ 0.000000] Unknown boot option `libata.dma=0': ignoring
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2410.960 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ d730000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 6121788k/7077888k available (2784k kernel code, 787156k absent, 168944k reserved, 1376k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.92 BogoMIPS (lpj=9643840)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006481] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009167] Mount-cache hash table entries: 256
[ 0.009385] Initializing cgroup subsys ns
[ 0.009435] Initializing cgroup subsys cpuacct
[ 0.009487] Initializing cgroup subsys devices
[ 0.009536] Initializing cgroup subsys freezer
[ 0.009588] Initializing cgroup subsys net_cls
[ 0.009668] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.009722] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.009775] CPU 0/0x0 -> Node 0
[ 0.009822] tseg: 0000000000
[ 0.009833] CPU: Physical Processor ID: 0
[ 0.009882] CPU: Processor Core ID: 0
[ 0.009940] using C1E aware idle routine
[ 0.010603] ACPI: Core revision 20090320
[ 0.017074] ACPI: setting ELCR to 0200 (from 8c20)
[ 0.017503] Setting APIC routing to flat
[ 0.017556] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.020000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4821.84 BogoMIPS (lpj=9643690)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.104395] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.104922] Brought up 2 CPUs
[ 0.104970] Total of 2 processors activated (9643.76 BogoMIPS).
[ 0.105047] CPU0 attaching sched-domain:
[ 0.105050] domain 0: span 0-1 level MC
[ 0.105052] groups: 0 1
[ 0.105056] CPU1 attaching sched-domain:
[ 0.105058] domain 0: span 0-1 level MC
[ 0.105060] groups: 1 0
[ 0.105116] net_namespace: 1936 bytes
[ 0.105116] Booting paravirtualized kernel on bare hardware
[ 0.105116] regulator: core version 0.5
[ 0.105116] NET: Registered protocol family 16
[ 0.105116] node 0 link 0: io port [1000, ffffff]
[ 0.105116] TOM: 00000000d0000000 aka 3328M
[ 0.105116] node 0 link 0: mmio [e0000000, efffffff]
[ 0.105116] node 0 link 0: mmio [a0000, bffff]
[ 0.105116] node 0 link 0: mmio [d0000000, fe0bffff]
[ 0.105116] TOM2: 00000001b0000000 aka 6912M
[ 0.105116] bus: [00,ff] on node 0 link 0
[ 0.105116] bus: 00 index 0 io port: [0, ffff]
[ 0.105116] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.105116] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.105116] bus: 00 index 3 mmio: [1b0000000, fcffffffff]
[ 0.105116] ACPI: bus type pci registered
[ 0.105116] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.105116] PCI: Not using MMCONFIG.
[ 0.105116] PCI: Using configuration type 1 for base access
[ 0.108052] bio: create slab <bio-0> at 0
[ 0.108594] ACPI: EC: Look up EC in DSDT
[ 0.119161] ACPI: Interpreter enabled
[ 0.120003] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.120206] ACPI: Using PIC for interrupt routing
[ 0.120310] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.127049] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.137416] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.148114] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - E5, should be D8 [20090320]
[ 0.148309] ACPI: No dock devices found.
[ 0.148425] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.148511] pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f]
[ 0.148511] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.148511] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.148511] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.148511] pci 0000:00:01.1: PME# disabled
[ 0.148511] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfbff000-0xdfbfffff]
[ 0.148511] pci 0000:00:02.0: supports D1 D2
[ 0.148511] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148511] pci 0000:00:02.0: PME# disabled
[ 0.148511] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfbfec00-0xdfbfecff]
[ 0.148532] pci 0000:00:02.1: supports D1 D2
[ 0.148533] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148588] pci 0000:00:02.1: PME# disabled
[ 0.148691] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfbf8000-0xdfbfbfff]
[ 0.148715] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.148768] pci 0000:00:05.0: PME# disabled
[ 0.148848] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.148881] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfbfd000-0xdfbfdfff]
[ 0.148885] pci 0000:00:07.0: reg 14 io port: [0xb480-0xb487]
[ 0.148904] pci 0000:00:07.0: supports D1 D2
[ 0.148906] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148962] pci 0000:00:07.0: PME# disabled
[ 0.149030] pci 0000:00:08.0: reg 10 io port: [0xb400-0xb407]
[ 0.149034] pci 0000:00:08.0: reg 14 io port: [0xb080-0xb083]
[ 0.149037] pci 0000:00:08.0: reg 18 io port: [0xb000-0xb007]
[ 0.149040] pci 0000:00:08.0: reg 1c io port: [0xac00-0xac03]
[ 0.149043] pci 0000:00:08.0: reg 20 io port: [0xa880-0xa88f]
[ 0.149047] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfbfc000-0xdfbfcfff]
[ 0.149074] pci 0000:00:08.1: reg 10 io port: [0xa800-0xa807]
[ 0.149078] pci 0000:00:08.1: reg 14 io port: [0xa480-0xa483]
[ 0.149081] pci 0000:00:08.1: reg 18 io port: [0xa400-0xa407]
[ 0.149085] pci 0000:00:08.1: reg 1c io port: [0xa080-0xa083]
[ 0.149088] pci 0000:00:08.1: reg 20 io port: [0xa000-0xa00f]
[ 0.149092] pci 0000:00:08.1: reg 24 32bit mmio: [0xdfbf3000-0xdfbf3fff]
[ 0.149133] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149188] pci 0000:00:09.0: PME# disabled
[ 0.149262] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149317] pci 0000:00:0b.0: PME# disabled
[ 0.149391] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149445] pci 0000:00:0c.0: PME# disabled
[ 0.149588] pci 0000:01:03.0: reg 10 32bit mmio: [0xdfcff800-0xdfcfffff]
[ 0.149593] pci 0000:01:03.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.149621] pci 0000:01:03.0: supports D2
[ 0.149623] pci 0000:01:03.0: PME# supported from D2 D3hot D3cold
[ 0.149678] pci 0000:01:03.0: PME# disabled
[ 0.149755] pci 0000:01:0a.0: reg 10 32bit mmio: [0xdfc00000-0xdfc7ffff]
[ 0.149760] pci 0000:01:0a.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.149777] pci 0000:01:0a.0: reg 30 32bit mmio: [0xdfce0000-0xdfceffff]
[ 0.149790] pci 0000:01:0a.0: supports D1 D2
[ 0.149812] pci 0000:00:04.0: transparent bridge
[ 0.149866] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
[ 0.149869] pci 0000:00:04.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.149872] pci 0000:00:04.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.149906] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.149963] pci 0000:02:00.0: PME# disabled
[ 0.150049] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.150103] pci 0000:02:00.2: PME# disabled
[ 0.150189] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.150192] pci 0000:00:09.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.150267] pci 0000:04:04.0: reg 10 64bit mmio: [0xdfe00000-0xdfefffff]
[ 0.150272] pci 0000:04:04.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.150334] pci 0000:02:00.2: bridge io port: [0xd000-0xdfff]
[ 0.150337] pci 0000:02:00.2: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.150393] pci 0000:05:00.0: reg 10 32bit mmio: [0xdffe0000-0xdfffffff]
[ 0.150402] pci 0000:05:00.0: reg 14 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.150411] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
[ 0.150439] pci 0000:05:00.0: reg 30 32bit mmio: [0xdffa0000-0xdffbffff]
[ 0.150475] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.150534] pci 0000:05:00.0: PME# disabled
[ 0.150629] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
[ 0.150631] pci 0000:00:0b.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.150675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.150842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.150956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.151019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.151082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.160159] ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
[ 0.160605] ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
[ 0.161051] ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 *11 14)
[ 0.161443] ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
[ 0.161890] ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
[ 0.162336] ACPI: PCI Interrupt Link [LNEB] (IRQs 7 *10 11 14)
[ 0.162726] ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
[ 0.163174] ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 *11 14)
[ 0.163567] ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
[ 0.164095] ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
[ 0.164488] ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
[ 0.164881] ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
[ 0.165271] ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
[ 0.165719] ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 11 14) *0, disabled.
[ 0.166170] ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
[ 0.166564] ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
[ 0.167017] ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
[ 0.167328] ACPI: PCI Interrupt Link [LSA1] (IRQs *5)
[ 0.167675] ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
[ 0.168034] usbcore: registered new interface driver usbfs
[ 0.168067] usbcore: registered new interface driver hub
[ 0.168067] usbcore: registered new device driver usb
[ 0.168067] PCI: Using ACPI for IRQ routing
[ 0.176133] PCI-DMA: Disabling AGP.
[ 0.176257] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.176257] PCI-DMA: using GART IOMMU.
[ 0.176257] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.176653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.176815] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.184011] Switched to high resolution mode on CPU 0
[ 0.184349] Switched to high resolution mode on CPU 1
[ 0.188012] pnp: PnP ACPI init
[ 0.188076] ACPI: bus type pnp registered
[ 0.195946] pnp: PnP ACPI: found 15 devices
[ 0.195997] ACPI: ACPI bus type pnp unregistered
[ 0.196071] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.196125] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.196180] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.196234] system 00:07: ioport range 0x580-0x5ff has been reserved
[ 0.196288] system 00:07: ioport range 0x800-0x87f could not be reserved
[ 0.196342] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.196400] system 00:07: ioport range 0xd00-0xd7f has been reserved
[ 0.196454] system 00:07: ioport range 0xd80-0xdff has been reserved
[ 0.196508] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.196562] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.196618] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.196673] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.196729] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.196784] system 00:07: iomem range 0xffb80000-0xffffffff has been reserved
[ 0.196845] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.196900] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.196959] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.197018] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.197072] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.197130] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.197185] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.197243] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.197297] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.197353] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.197408] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.197480] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
[ 0.202565] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.202619] pci 0000:00:04.0: IO window: 0xc000-0xcfff
[ 0.202672] pci 0000:00:04.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.202725] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.202797] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.202849] pci 0000:02:00.0: IO window: disabled
[ 0.202900] pci 0000:02:00.0: MEM window: disabled
[ 0.202951] pci 0000:02:00.0: PREFETCH window: disabled
[ 0.203005] pci 0000:02:00.2: PCI bridge, secondary bus 0000:04
[ 0.203058] pci 0000:02:00.2: IO window: 0xd000-0xdfff
[ 0.203111] pci 0000:02:00.2: MEM window: 0xdfd00000-0xdfefffff
[ 0.203164] pci 0000:02:00.2: PREFETCH window: disabled
[ 0.203217] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.203270] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.203322] pci 0000:00:09.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.203375] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.203427] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05
[ 0.203480] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.203532] pci 0000:00:0b.0: MEM window: 0xdff00000-0xdfffffff
[ 0.203584] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.203637] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:06
[ 0.203689] pci 0000:00:0c.0: IO window: disabled
[ 0.203739] pci 0000:00:0c.0: MEM window: disabled
[ 0.203793] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.203850] pci 0000:00:04.0: setting latency timer to 64
[ 0.203854] pci 0000:00:09.0: setting latency timer to 64
[ 0.203859] pci 0000:02:00.0: setting latency timer to 64
[ 0.203864] pci 0000:02:00.2: setting latency timer to 64
[ 0.203868] pci 0000:00:0b.0: setting latency timer to 64
[ 0.203872] pci 0000:00:0c.0: setting latency timer to 64
[ 0.203876] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.203878] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.203880] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.203883] pci_bus 0000:01: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.203885] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.203887] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.203889] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.203892] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.203894] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.203897] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.203899] pci_bus 0000:04: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.203902] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.203904] pci_bus 0000:05: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.204016] NET: Registered protocol family 2
[ 0.240273] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.242829] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.248073] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.248760] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.248816] TCP reno registered
[ 0.256127] NET: Registered protocol family 1
[ 0.256233] Trying to unpack rootfs image as initramfs...
[ 0.451577] Freeing initrd memory: 8817k freed
[ 0.458342] audit: initializing netlink socket (disabled)
[ 0.458406] type=2000 audit(1249505004.456:1): initialized
[ 0.458959] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.459177] VFS: Disk quotas dquot_6.5.2
[ 0.459264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.459378] msgmni has been set to 11973
[ 0.459626] alg: No test for stdrng (krng)
[ 0.459745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.459816] io scheduler noop registered
[ 0.459864] io scheduler anticipatory registered
[ 0.459914] io scheduler deadline registered
[ 0.459995] io scheduler cfq registered (default)
[ 0.984280] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984375] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984478] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984583] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984685] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984791] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984901] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.985019] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.985080] pci 0000:01:0a.0: Boot video device
[ 0.985270] alloc irq_desc for 24 on cpu 0 node 0
[ 0.985272] alloc kstat_irqs on cpu 0 node 0
[ 0.985280] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
[ 0.985286] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.985451] alloc irq_desc for 25 on cpu 0 node 0
[ 0.985453] alloc kstat_irqs on cpu 0 node 0
[ 0.985457] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 0.985463] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 0.985622] alloc irq_desc for 26 on cpu 0 node 0
[ 0.985624] alloc kstat_irqs on cpu 0 node 0
[ 0.985628] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 0.985634] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 0.989969] Linux agpgart interface v0.103
[ 0.990023] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.990198] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.990678] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.992591] brd: module loaded
[ 0.992717] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.992993] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.993051] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.993248] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.993454] mice: PS/2 mouse device common for all mice
[ 0.993574] rtc_cmos 00:02: RTC can wake from S4
[ 0.993688] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.993767] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.993857] cpuidle: using governor ladder
[ 0.993907] cpuidle: using governor menu
[ 0.993958] No iBFT detected.
[ 0.994332] TCP cubic registered
[ 0.994472] NET: Registered protocol family 10
[ 0.994997] lo: Disabled Privacy Extensions
[ 0.995328] Mobile IPv6
[ 0.995375] NET: Registered protocol family 17
[ 0.995581] registered taskstats version 1
[ 0.995811] rtc_cmos 00:02: setting system clock to 2009-08-05 20:43:26 UTC (1249505006)
[ 0.995960] Freeing unused kernel memory: 560k freed
[ 0.996285] Write protecting the kernel read-only data: 3772k
[ 1.015253] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.160187] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.161576] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
[ 1.161632] PCI: setting IRQ 10 as level-triggered
[ 1.161637] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10
[ 1.161741] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.161744] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.161896] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.162002] ehci_hcd 0000:00:02.1: debug port 1
[ 1.162053] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.162064] ehci_hcd 0000:00:02.1: irq 10, io mem 0xdfbfec00
[ 1.163907] FDC 0 is a post-1991 82077
[ 1.169177] Uniform Multi-Platform E-IDE driver
[ 1.176037] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.176120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.176174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.176243] usb usb1: Product: EHCI Host Controller
[ 1.176296] usb usb1: Manufacturer: Linux 2.6.30-btrfsnewformat2 ehci_hcd
[ 1.176350] usb usb1: SerialNumber: 0000:00:02.1
[ 1.176473] usb usb1: configuration #1 chosen from 1 choice
[ 1.176554] hub 1-0:1.0: USB hub found
[ 1.176611] hub 1-0:1.0: 10 ports detected
[ 1.177218] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.177271] PCI: setting IRQ 11 as level-triggered
[ 1.177276] firewire_ohci 0000:01:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.179648] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.180121] amd74xx 0000:00:06.0: UDMA133 controller
[ 1.180176] amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
[ 1.180246] amd74xx 0000:00:06.0: IDE port disabled
[ 1.180308] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
[ 1.180383] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 1.180440] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.180497] Probing IDE interface ide0...
[ 1.266341] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 1.266397] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.266483] firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
[ 1.266954] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 10
[ 1.267008] e1000e 0000:05:00.0: PCI INT A -> Link[LNEB] -> GSI 10 (level, low) -> IRQ 10
[ 1.267088] e1000e 0000:05:00.0: setting latency timer to 64
[ 1.267241] alloc irq_desc for 27 on cpu 0 node 0
[ 1.267243] alloc kstat_irqs on cpu 0 node 0
[ 1.267257] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 1.447176] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:24:85:7a
[ 1.447249] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.447378] 0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50855-002
[ 1.449131] udev: renamed network interface eth0 to eth1
[ 1.468111] hda: WDC WD1600JB-00GVA0, ATA DISK drive
[ 1.764090] firewire_core: created device fw0: GUID 0011d80000f46d61, S400
[ 2.140050] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.141276] hda: UDMA/100 mode selected
[ 2.142593] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.167262] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
[ 2.167319] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11
[ 2.167425] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.167428] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.167566] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.167650] ohci_hcd 0000:00:02.0: irq 11, io mem 0xdfbff000
[ 2.222017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.222072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.222141] usb usb2: Product: OHCI Host Controller
[ 2.222191] usb usb2: Manufacturer: Linux 2.6.30-btrfsnewformat2 ohci_hcd
[ 2.222248] usb usb2: SerialNumber: 0000:00:02.0
[ 2.222348] usb usb2: configuration #1 chosen from 1 choice
[ 2.222431] hub 2-0:1.0: USB hub found
[ 2.222488] hub 2-0:1.0: 10 ports detected
[ 2.222787] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.223123] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
[ 2.223177] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
[ 2.223251] forcedeth 0000:00:07.0: setting latency timer to 64
[ 2.740862] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:18:f3:aa:18:da
[ 2.740938] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 2.753300] SCSI subsystem initialized
[ 2.768118] libata version 3.00 loaded.
[ 2.771134] sata_nv 0000:00:08.0: version 3.5
[ 2.771420] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
[ 2.771475] PCI: setting IRQ 15 as level-triggered
[ 2.771480] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
[ 2.771626] sata_nv 0000:00:08.0: setting latency timer to 64
[ 2.771705] scsi0 : sata_nv
[ 2.771879] scsi1 : sata_nv
[ 2.772097] ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 15
[ 2.772155] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 15
[ 2.772523] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 5
[ 2.772575] PCI: setting IRQ 5 as level-triggered
[ 2.772579] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 5 (level, low) -> IRQ 5
[ 2.772695] sata_nv 0000:00:08.1: setting latency timer to 64
[ 2.772865] scsi2 : sata_nv
[ 2.772992] scsi3 : sata_nv
[ 2.773198] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa000 irq 5
[ 2.773253] ata4: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0xa008 irq 5
[ 2.872338] ide-gd driver 1.18
[ 2.872420] hda: max request size: 512KiB
[ 2.873757] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 2.875862] hda: cache flushes supported
[ 2.875950] hda: hda1 hda2 hda3
[ 3.248036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.256114] ata1.00: FORCE: horkage modified (noncq)
[ 3.257534] ata1.00: ATA-6: WDC WD1600JD-00GBB0, 02.05D02, max UDMA/100
[ 3.257591] ata1.00: 312581808 sectors, multi 16: LBA48
[ 3.257652] ata1.00: applying bridge limits
[ 3.273468] ata1.00: configured for PIO4
[ 3.273622] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JD-00G 02.0 PQ: 0 ANSI: 5
[ 3.740032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.748111] ata2.00: FORCE: horkage modified (noncq)
[ 3.748164] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
[ 3.764126] ata2.00: configured for PIO4
[ 3.765670] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
[ 4.098146] Driver 'sd' needs updating - please use bus_type methods
[ 4.098336] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.098422] sd 0:0:0:0: [sda] Write Protect is off
[ 4.098475] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.098492] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.098645] sda: sda1 sda2 sda3
[ 4.139767] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.142108] Driver 'sr' needs updating - please use bus_type methods
[ 4.147729] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.147805] Uniform CD-ROM driver Revision: 3.20
[ 4.147962] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.154660] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.154745] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.620946] md: raid1 personality registered for level 1
[ 4.622763] xor: automatically using best checksumming function: generic_sse
[ 4.640008] generic_sse: 7436.000 MB/sec
[ 4.640058] xor: using function: generic_sse (7436.000 MB/sec)
[ 4.640626] async_tx: api initialized (async)
[ 4.708008] raid6: int64x1 2258 MB/s
[ 4.776013] raid6: int64x2 2882 MB/s
[ 4.844017] raid6: int64x4 2247 MB/s
[ 4.912036] raid6: int64x8 2016 MB/s
[ 4.980063] raid6: sse2x1 1043 MB/s
[ 5.048031] raid6: sse2x2 1674 MB/s
[ 5.116031] raid6: sse2x4 2286 MB/s
[ 5.116079] raid6: using algorithm sse2x4 (2286 MB/s)
[ 5.119013] md: raid6 personality registered for level 6
[ 5.119068] md: raid5 personality registered for level 5
[ 5.119119] md: raid4 personality registered for level 4
[ 5.232595] md: md0 stopped.
[ 5.272724] md: bind<hda1>
[ 5.273333] md: bind<sda1>
[ 5.274552] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.279314] md0: unknown partition table
[ 5.344780] md: md1 stopped.
[ 5.347457] md: bind<hda2>
[ 5.348070] md: bind<sda2>
[ 5.348133] md: md1: raid array is not clean -- starting background reconstruction
[ 5.349862] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.352801] md1: unknown partition table
[ 5.401226] device-mapper: uevent: version 1.0.3
[ 5.401612] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.539166] PM: Starting manual resume from disk
[ 5.591241] kjournald starting. Commit interval 5 seconds
[ 5.591302] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.088132] udev: starting version 141
[ 7.537547] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.537624] ACPI: Power Button [PWRF]
[ 7.537757] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 7.537834] ACPI: Power Button [PWRB]
[ 8.537928] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.543600] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.543700] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.553157] processor ACPI_CPU:00: registered as cooling_device0
[ 8.553427] processor ACPI_CPU:01: registered as cooling_device1
[ 8.562240] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.571142] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.703846] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 8.703919] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 9.056876] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
[ 9.056933] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11
[ 9.057162] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 9.104215] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.128923] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.814340] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 9.814512] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 12.272211] Adding 3943948k swap on /dev/sda3. Priority:-1 extents:1 across:3943948k
[ 12.277613] Adding 3943948k swap on /dev/hda3. Priority:-2 extents:1 across:3943948k
[ 12.488653] EXT3 FS on dm-0, <6>md: resync of RAID array md1
[ 12.488658] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 12.488661] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 12.488664] md: using 128k window, over a total of 151364352 blocks.
[ 12.488666] md: resuming resync of md1 from checkpoint.
[ 12.488935] internal journal
[ 12.849491] loop: module loaded
[ 13.843359] kjournald starting. Commit interval 5 seconds
[ 13.848847] EXT3 FS on md0, internal journal
[ 13.848928] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.016783] EXT4-fs: barriers enabled
[ 14.031603] kjournald2 starting: pid 2352, dev dm-3:8, commit interval 5 seconds
[ 14.032662] EXT4 FS on dm-3, internal journal on dm-3:8
[ 14.032714] EXT4-fs: delayed allocation enabled
[ 14.032763] EXT4-fs: file extents enabled
[ 14.034089] EXT4-fs: mballoc enabled
[ 14.034151] EXT4-fs: mounted filesystem dm-3 with ordered data mode
[ 15.734281] Bridge firewalling registered
[ 15.762229] device eth1 entered promiscuous mode
[ 15.904387] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 15.960078] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 15.961781] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.284847] Loading iSCSI transport class v2.0-870.
[ 19.320165] iscsi: registered transport (tcp)
[ 19.402444] iscsi: registered transport (iser)
[ 19.931919] RPC: Registered udp transport module.
[ 19.931990] RPC: Registered tcp transport module.
[ 20.002507] Slow work thread pool: Starting up
[ 20.002624] Slow work thread pool: Ready
[ 20.002739] FS-Cache: Loaded
[ 20.080948] FS-Cache: Netfs 'nfs' registered for caching
[ 20.143294] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 26.288008] br0: no IPv6 routers present
[ 28.585008] torbr: no IPv6 routers present
[ 86.402426] virbr1: starting userspace STP failed, starting kernel STP
[ 86.443667] svc: failed to register lockdv1 RPC service (errno 97).
[ 86.444273] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 86.457208] NFSD: starting 90-second grace period
[ 86.618889] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 88.684985] tun: Universal TUN/TAP device driver, 1.6
[ 88.685042] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 88.687548] device vnet0 entered promiscuous mode
[ 88.689051] br0: port 2(vnet0) entering learning state
[ 88.838659] br0: port 2(vnet0) entering disabled state
[ 88.853336] device vnet0 left promiscuous mode
[ 88.853390] br0: port 2(vnet0) entering disabled state
[ 88.998418] lo: Disabled Privacy Extensions
[ 95.737787] sata_mv 0000:04:04.0: version 1.28
[ 95.738241] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 11
[ 95.738296] sata_mv 0000:04:04.0: PCI INT A -> Link[LNED] -> GSI 11 (level, low) -> IRQ 11
[ 95.738584] sata_mv 0000:04:04.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[ 95.739657] scsi4 : sata_mv
[ 95.740279] scsi5 : sata_mv
[ 95.741221] scsi6 : sata_mv
[ 95.749542] scsi7 : sata_mv
[ 95.749704] scsi8 : sata_mv
[ 95.749812] scsi9 : sata_mv
[ 95.749922] scsi10 : sata_mv
[ 95.750032] scsi11 : sata_mv
[ 95.750121] ata5: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe22000 irq 11
[ 95.750193] ata6: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe24000 irq 11
[ 95.750265] ata7: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe26000 irq 11
[ 95.750337] ata8: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe28000 irq 11
[ 95.750412] ata9: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe32000 irq 11
[ 95.750482] ata10: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe34000 irq 11
[ 95.750557] ata11: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe36000 irq 11
[ 95.750628] ata12: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe38000 irq 11
[ 96.224041] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 96.233243] ata5.00: FORCE: horkage modified (noncq)
[ 96.256048] ata5.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[ 96.256104] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 96.272062] ata5.00: configured for PIO4
[ 96.272205] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 96.272423] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 96.272555] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 96.272637] sd 4:0:0:0: [sdb] Write Protect is off
[ 96.272688] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.272709] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 96.272878] sdb:<4>ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.298591] sdb1
[ 96.298824] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 96.301341] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.301947] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.314785] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.354571] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.370164] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.381571] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.393599] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.415409] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.432198] ata5: sata_mv: attempting PIO w/multiple DRQ: this may fail due to h/w errata
[ 96.748035] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 96.764053] ata6.00: FORCE: horkage modified (noncq)
[ 96.773045] ata6.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 96.773100] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 96.804087] ata6.00: configured for PIO4
[ 96.804217] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 96.804422] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 96.804553] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 96.804643] sd 5:0:0:0: [sdc] Write Protect is off
[ 96.804700] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 96.804721] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 96.804880] sdc: sdc1
[ 96.814821] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 97.020008] virbr1: no IPv6 routers present
[ 97.280039] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 97.296054] ata7.00: FORCE: horkage modified (noncq)
[ 97.320049] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 97.320104] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 97.344062] ata7.00: configured for PIO4
[ 97.344205] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 97.344408] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 97.344536] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 97.344617] sd 6:0:0:0: [sdd] Write Protect is off
[ 97.344668] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 97.344688] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 97.344851] sdd: sdd1
[ 97.354810] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 97.828034] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 97.886421] ata8.00: FORCE: horkage modified (noncq)
[ 97.924049] ata8.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 97.924105] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 97.969788] ata8.00: configured for PIO4
[ 97.974998] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 97.975205] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 97.975340] sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 97.975422] sd 7:0:0:0: [sde] Write Protect is off
[ 97.975473] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 97.975493] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 97.975656] sde: sde1
[ 97.983461] sd 7:0:0:0: [sde] Attached SCSI disk
[ 98.448035] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 98.464053] ata9.00: FORCE: horkage modified (noncq)
[ 98.464107] ata9.00: ATA-7: WDC WD5000AAKS-65TMA0, 12.01C01, max UDMA/133
[ 98.464163] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 98.488067] ata9.00: configured for PIO4
[ 98.488206] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
[ 98.488417] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 98.488546] sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 98.488627] sd 8:0:0:0: [sdf] Write Protect is off
[ 98.488678] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 98.488697] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 98.488860] sdf: sdf1
[ 98.514814] sd 8:0:0:0: [sdf] Attached SCSI disk
[ 98.809029] ata10: SATA link down (SStatus 0 SControl 300)
[ 99.128032] ata11: SATA link down (SStatus 0 SControl 300)
[ 99.448028] ata12: SATA link down (SStatus 0 SControl 300)
[-- Attachment #1.3: sata_mv-dmesg.noapic.noncq-workingslow.log --]
[-- Type: text/plain, Size: 58465 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-btrfsnewformat2 (2.6.30) (root@slimer) (gcc version 4.3.3 (Debian 4.3.3-15) ) #3 SMP Mon Aug 3 18:09:53 GMT 2009
[ 0.000000] Command line: root=/dev/mapper/slimerroot-root ro noapic libata.force=noncq
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffc0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffc0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffc0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ 14000-1c000
[ 0.000000] RAMDISK: 37753000 - 37fef542
[ 0.000000] ACPI: RSDP 00000000000fb800 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffc0100 00054 (v01 A_M_I_ OEMXSDT 09000710 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffc0290 000F4 (v03 A_M_I_ OEMFACP 09000710 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffc05c0 051BD (v01 A0653 A0653000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 00000000cffce000 00040
[ 0.000000] ACPI: APIC 00000000cffc0390 00070 (v01 A_M_I_ OEMAPIC 09000710 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffc0400 0003C (v01 A_M_I_ OEMMCFG 09000710 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffce040 00060 (v01 A_M_I_ AMI_OEM 09000710 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffc5780 00038 (v01 A_M_I_ OEMHPET0 09000710 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffc57c0 00248 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [0000000000017000 - 000000000001efff]
[ 0.000000] bootmap [000000000001f000 - 0000000000054fff] pages 36
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d38cc] TEXT DATA BSS ==> [0000200000 - 00007d38cc]
[ 0.000000] #3 [0037753000 - 0037fef542] RAMDISK ==> [0037753000 - 0037fef542]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00007d4000 - 00007d4290] BRK ==> [00007d4000 - 00007d4290]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000017000] PGTABLE ==> [0000014000 - 0000017000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20005ffffff] PMD -> [ffff880028200000-ffff88002d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000cffc0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572683
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1601 pages reserved
[ 0.000000] DMA zone: 2322 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833528 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: TEMPLATE
[ 0.000000] MPTABLE: Product ID: 1394
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000
[ 0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028034000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1546890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/slimerroot-root ro noapic libata.force=noncq
[ 0.000000] Unknown boot option `libata.force=noncq': ignoring
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 2410.947 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ d730000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 6121788k/7077888k available (2784k kernel code, 787156k absent, 168944k reserved, 1376k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.89 BogoMIPS (lpj=9643788)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006481] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009166] Mount-cache hash table entries: 256
[ 0.009385] Initializing cgroup subsys ns
[ 0.009435] Initializing cgroup subsys cpuacct
[ 0.009490] Initializing cgroup subsys devices
[ 0.009540] Initializing cgroup subsys freezer
[ 0.009590] Initializing cgroup subsys net_cls
[ 0.009669] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.009724] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.009777] CPU 0/0x0 -> Node 0
[ 0.009824] tseg: 0000000000
[ 0.009835] CPU: Physical Processor ID: 0
[ 0.009883] CPU: Processor Core ID: 0
[ 0.009941] using C1E aware idle routine
[ 0.010605] ACPI: Core revision 20090320
[ 0.017076] ACPI: setting ELCR to 0200 (from 8c20)
[ 0.017506] Setting APIC routing to flat
[ 0.017562] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.020000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4821.85 BogoMIPS (lpj=9643705)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.104347] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.104869] Brought up 2 CPUs
[ 0.104917] Total of 2 processors activated (9643.74 BogoMIPS).
[ 0.104994] CPU0 attaching sched-domain:
[ 0.104996] domain 0: span 0-1 level MC
[ 0.104998] groups: 0 1
[ 0.105003] CPU1 attaching sched-domain:
[ 0.105005] domain 0: span 0-1 level MC
[ 0.105007] groups: 1 0
[ 0.105062] net_namespace: 1936 bytes
[ 0.105062] Booting paravirtualized kernel on bare hardware
[ 0.105062] regulator: core version 0.5
[ 0.105062] NET: Registered protocol family 16
[ 0.105062] node 0 link 0: io port [1000, ffffff]
[ 0.105062] TOM: 00000000d0000000 aka 3328M
[ 0.105062] node 0 link 0: mmio [e0000000, efffffff]
[ 0.105062] node 0 link 0: mmio [a0000, bffff]
[ 0.105062] node 0 link 0: mmio [d0000000, fe0bffff]
[ 0.105062] TOM2: 00000001b0000000 aka 6912M
[ 0.105062] bus: [00,ff] on node 0 link 0
[ 0.105062] bus: 00 index 0 io port: [0, ffff]
[ 0.105062] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.105062] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.105062] bus: 00 index 3 mmio: [1b0000000, fcffffffff]
[ 0.105062] ACPI: bus type pci registered
[ 0.105062] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.105062] PCI: Not using MMCONFIG.
[ 0.105062] PCI: Using configuration type 1 for base access
[ 0.105062] bio: create slab <bio-0> at 0
[ 0.108582] ACPI: EC: Look up EC in DSDT
[ 0.119104] ACPI: Interpreter enabled
[ 0.120003] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.120207] ACPI: Using PIC for interrupt routing
[ 0.120309] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.127106] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.137471] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.148114] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - E5, should be D8 [20090320]
[ 0.148310] ACPI: No dock devices found.
[ 0.148424] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.148509] pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f]
[ 0.148509] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.148509] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.148509] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.148509] pci 0000:00:01.1: PME# disabled
[ 0.148509] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfbff000-0xdfbfffff]
[ 0.148509] pci 0000:00:02.0: supports D1 D2
[ 0.148509] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148509] pci 0000:00:02.0: PME# disabled
[ 0.148509] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfbfec00-0xdfbfecff]
[ 0.148531] pci 0000:00:02.1: supports D1 D2
[ 0.148533] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148587] pci 0000:00:02.1: PME# disabled
[ 0.148690] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfbf8000-0xdfbfbfff]
[ 0.148714] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.148767] pci 0000:00:05.0: PME# disabled
[ 0.148848] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.148880] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfbfd000-0xdfbfdfff]
[ 0.148884] pci 0000:00:07.0: reg 14 io port: [0xb480-0xb487]
[ 0.148903] pci 0000:00:07.0: supports D1 D2
[ 0.148905] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148961] pci 0000:00:07.0: PME# disabled
[ 0.149029] pci 0000:00:08.0: reg 10 io port: [0xb400-0xb407]
[ 0.149032] pci 0000:00:08.0: reg 14 io port: [0xb080-0xb083]
[ 0.149035] pci 0000:00:08.0: reg 18 io port: [0xb000-0xb007]
[ 0.149039] pci 0000:00:08.0: reg 1c io port: [0xac00-0xac03]
[ 0.149042] pci 0000:00:08.0: reg 20 io port: [0xa880-0xa88f]
[ 0.149046] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfbfc000-0xdfbfcfff]
[ 0.149074] pci 0000:00:08.1: reg 10 io port: [0xa800-0xa807]
[ 0.149077] pci 0000:00:08.1: reg 14 io port: [0xa480-0xa483]
[ 0.149080] pci 0000:00:08.1: reg 18 io port: [0xa400-0xa407]
[ 0.149083] pci 0000:00:08.1: reg 1c io port: [0xa080-0xa083]
[ 0.149087] pci 0000:00:08.1: reg 20 io port: [0xa000-0xa00f]
[ 0.149090] pci 0000:00:08.1: reg 24 32bit mmio: [0xdfbf3000-0xdfbf3fff]
[ 0.149131] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149186] pci 0000:00:09.0: PME# disabled
[ 0.149260] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149314] pci 0000:00:0b.0: PME# disabled
[ 0.149388] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149443] pci 0000:00:0c.0: PME# disabled
[ 0.149585] pci 0000:01:03.0: reg 10 32bit mmio: [0xdfcff800-0xdfcfffff]
[ 0.149591] pci 0000:01:03.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.149620] pci 0000:01:03.0: supports D2
[ 0.149622] pci 0000:01:03.0: PME# supported from D2 D3hot D3cold
[ 0.149676] pci 0000:01:03.0: PME# disabled
[ 0.149753] pci 0000:01:0a.0: reg 10 32bit mmio: [0xdfc00000-0xdfc7ffff]
[ 0.149758] pci 0000:01:0a.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.149775] pci 0000:01:0a.0: reg 30 32bit mmio: [0xdfce0000-0xdfceffff]
[ 0.149788] pci 0000:01:0a.0: supports D1 D2
[ 0.149810] pci 0000:00:04.0: transparent bridge
[ 0.149864] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
[ 0.149868] pci 0000:00:04.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.149871] pci 0000:00:04.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.149904] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.149960] pci 0000:02:00.0: PME# disabled
[ 0.150046] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.150100] pci 0000:02:00.2: PME# disabled
[ 0.150186] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.150188] pci 0000:00:09.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.150264] pci 0000:04:04.0: reg 10 64bit mmio: [0xdfe00000-0xdfefffff]
[ 0.150269] pci 0000:04:04.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.150331] pci 0000:02:00.2: bridge io port: [0xd000-0xdfff]
[ 0.150334] pci 0000:02:00.2: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.150390] pci 0000:05:00.0: reg 10 32bit mmio: [0xdffe0000-0xdfffffff]
[ 0.150399] pci 0000:05:00.0: reg 14 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.150407] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
[ 0.150435] pci 0000:05:00.0: reg 30 32bit mmio: [0xdffa0000-0xdffbffff]
[ 0.150471] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.150527] pci 0000:05:00.0: PME# disabled
[ 0.150621] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
[ 0.150623] pci 0000:00:0b.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.150667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.150834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.150947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.151011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.151074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.160175] ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
[ 0.160630] ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
[ 0.161081] ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 *11 14)
[ 0.161471] ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
[ 0.161920] ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
[ 0.162366] ACPI: PCI Interrupt Link [LNEB] (IRQs 7 *10 11 14)
[ 0.162757] ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
[ 0.163204] ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 *11 14)
[ 0.163595] ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
[ 0.164159] ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
[ 0.164553] ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
[ 0.164951] ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
[ 0.165344] ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
[ 0.165796] ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 11 14) *0, disabled.
[ 0.166246] ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
[ 0.166635] ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
[ 0.167084] ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
[ 0.167393] ACPI: PCI Interrupt Link [LSA1] (IRQs *5)
[ 0.167746] ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
[ 0.168052] usbcore: registered new interface driver usbfs
[ 0.168066] usbcore: registered new interface driver hub
[ 0.168066] usbcore: registered new device driver usb
[ 0.168066] PCI: Using ACPI for IRQ routing
[ 0.176116] PCI-DMA: Disabling AGP.
[ 0.176239] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.176239] PCI-DMA: using GART IOMMU.
[ 0.176239] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.176648] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.176810] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.184011] Switched to high resolution mode on CPU 0
[ 0.184348] Switched to high resolution mode on CPU 1
[ 0.192012] pnp: PnP ACPI init
[ 0.192077] ACPI: bus type pnp registered
[ 0.199714] pnp: PnP ACPI: found 15 devices
[ 0.199765] ACPI: ACPI bus type pnp unregistered
[ 0.199825] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.199879] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.199933] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.199987] system 00:07: ioport range 0x580-0x5ff has been reserved
[ 0.200053] system 00:07: ioport range 0x800-0x87f could not be reserved
[ 0.200107] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.200161] system 00:07: ioport range 0xd00-0xd7f has been reserved
[ 0.200215] system 00:07: ioport range 0xd80-0xdff has been reserved
[ 0.200269] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.200323] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.200378] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.200433] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.200489] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.200545] system 00:07: iomem range 0xffb80000-0xffffffff has been reserved
[ 0.200603] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.200658] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.200717] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.200771] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.200825] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.200879] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.200935] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.200992] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.201052] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.201106] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.201161] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.201231] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
[ 0.206318] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.206372] pci 0000:00:04.0: IO window: 0xc000-0xcfff
[ 0.206425] pci 0000:00:04.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.206479] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.206551] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.206603] pci 0000:02:00.0: IO window: disabled
[ 0.206655] pci 0000:02:00.0: MEM window: disabled
[ 0.206706] pci 0000:02:00.0: PREFETCH window: disabled
[ 0.206760] pci 0000:02:00.2: PCI bridge, secondary bus 0000:04
[ 0.206813] pci 0000:02:00.2: IO window: 0xd000-0xdfff
[ 0.206866] pci 0000:02:00.2: MEM window: 0xdfd00000-0xdfefffff
[ 0.206920] pci 0000:02:00.2: PREFETCH window: disabled
[ 0.206973] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.207026] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.207078] pci 0000:00:09.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.207131] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.207184] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05
[ 0.207236] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.207288] pci 0000:00:0b.0: MEM window: 0xdff00000-0xdfffffff
[ 0.207341] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.207393] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:06
[ 0.207446] pci 0000:00:0c.0: IO window: disabled
[ 0.207496] pci 0000:00:0c.0: MEM window: disabled
[ 0.207547] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.207607] pci 0000:00:04.0: setting latency timer to 64
[ 0.207611] pci 0000:00:09.0: setting latency timer to 64
[ 0.207616] pci 0000:02:00.0: setting latency timer to 64
[ 0.207621] pci 0000:02:00.2: setting latency timer to 64
[ 0.207625] pci 0000:00:0b.0: setting latency timer to 64
[ 0.207629] pci 0000:00:0c.0: setting latency timer to 64
[ 0.207632] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.207635] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.207637] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.207640] pci_bus 0000:01: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.207642] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.207644] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.207647] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.207649] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.207651] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.207654] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.207656] pci_bus 0000:04: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.207659] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.207661] pci_bus 0000:05: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.207758] NET: Registered protocol family 2
[ 0.236272] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.238838] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.244310] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.244993] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.245054] TCP reno registered
[ 0.256126] NET: Registered protocol family 1
[ 0.256232] Trying to unpack rootfs image as initramfs...
[ 0.451588] Freeing initrd memory: 8817k freed
[ 0.458370] audit: initializing netlink socket (disabled)
[ 0.458434] type=2000 audit(1249504312.456:1): initialized
[ 0.458986] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.459207] VFS: Disk quotas dquot_6.5.2
[ 0.459295] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.459408] msgmni has been set to 11973
[ 0.459656] alg: No test for stdrng (krng)
[ 0.459776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.459847] io scheduler noop registered
[ 0.459895] io scheduler anticipatory registered
[ 0.459945] io scheduler deadline registered
[ 0.460042] io scheduler cfq registered (default)
[ 0.984322] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984417] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984521] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984623] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984725] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984831] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.984941] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.985059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.985120] pci 0000:01:0a.0: Boot video device
[ 0.985310] alloc irq_desc for 24 on cpu 0 node 0
[ 0.985313] alloc kstat_irqs on cpu 0 node 0
[ 0.985320] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
[ 0.985326] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.985490] alloc irq_desc for 25 on cpu 0 node 0
[ 0.985491] alloc kstat_irqs on cpu 0 node 0
[ 0.985496] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 0.985501] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 0.985659] alloc irq_desc for 26 on cpu 0 node 0
[ 0.985661] alloc kstat_irqs on cpu 0 node 0
[ 0.985665] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 0.985671] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 0.990031] Linux agpgart interface v0.103
[ 0.990087] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.990263] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.990747] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.992718] brd: module loaded
[ 0.992848] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.993208] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.993263] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.993480] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.993687] mice: PS/2 mouse device common for all mice
[ 0.993806] rtc_cmos 00:02: RTC can wake from S4
[ 0.993913] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.993993] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.994076] cpuidle: using governor ladder
[ 0.994126] cpuidle: using governor menu
[ 0.994179] No iBFT detected.
[ 0.994553] TCP cubic registered
[ 0.994695] NET: Registered protocol family 10
[ 0.995219] lo: Disabled Privacy Extensions
[ 0.995549] Mobile IPv6
[ 0.995596] NET: Registered protocol family 17
[ 0.995796] registered taskstats version 1
[ 0.996069] rtc_cmos 00:02: setting system clock to 2009-08-05 20:31:53 UTC (1249504313)
[ 0.996200] Freeing unused kernel memory: 560k freed
[ 0.996501] Write protecting the kernel read-only data: 3772k
[ 1.016395] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.156730] FDC 0 is a post-1991 82077
[ 1.162265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.162663] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
[ 1.162719] PCI: setting IRQ 10 as level-triggered
[ 1.162725] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10
[ 1.162831] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.162834] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.162994] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.163102] ehci_hcd 0000:00:02.1: debug port 1
[ 1.163154] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.163163] ehci_hcd 0000:00:02.1: irq 10, io mem 0xdfbfec00
[ 1.173003] Uniform Multi-Platform E-IDE driver
[ 1.176347] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.176421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.176475] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.176544] usb usb1: Product: EHCI Host Controller
[ 1.176595] usb usb1: Manufacturer: Linux 2.6.30-btrfsnewformat2 ehci_hcd
[ 1.176650] usb usb1: SerialNumber: 0000:00:02.1
[ 1.176763] usb usb1: configuration #1 chosen from 1 choice
[ 1.176841] hub 1-0:1.0: USB hub found
[ 1.176897] hub 1-0:1.0: 10 ports detected
[ 1.177770] amd74xx 0000:00:06.0: UDMA133 controller
[ 1.177824] amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
[ 1.177897] amd74xx 0000:00:06.0: IDE port disabled
[ 1.177958] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
[ 1.178031] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 1.178089] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.178143] Probing IDE interface ide0...
[ 1.187362] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.187415] PCI: setting IRQ 11 as level-triggered
[ 1.187420] firewire_ohci 0000:01:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.197094] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 1.197150] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.197565] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 10
[ 1.197620] e1000e 0000:05:00.0: PCI INT A -> Link[LNEB] -> GSI 10 (level, low) -> IRQ 10
[ 1.197699] e1000e 0000:05:00.0: setting latency timer to 64
[ 1.197844] alloc irq_desc for 27 on cpu 0 node 0
[ 1.197846] alloc kstat_irqs on cpu 0 node 0
[ 1.197861] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 1.269688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.272069] firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
[ 1.379166] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:24:85:7a
[ 1.379241] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.379370] 0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50855-002
[ 1.380991] udev: renamed network interface eth0 to eth1
[ 1.464108] hda: WDC WD1600JB-00GVA0, ATA DISK drive
[ 1.768085] firewire_core: created device fw0: GUID 0011d80000f46d61, S400
[ 2.136038] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.137259] hda: UDMA/100 mode selected
[ 2.138601] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.163161] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.163517] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
[ 2.163571] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
[ 2.163648] forcedeth 0000:00:07.0: setting latency timer to 64
[ 2.684848] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:18:f3:aa:18:da
[ 2.684923] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 2.685584] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
[ 2.685638] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11
[ 2.685732] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.685735] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.685872] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.685957] ohci_hcd 0000:00:02.0: irq 11, io mem 0xdfbff000
[ 2.742021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.742081] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.742150] usb usb2: Product: OHCI Host Controller
[ 2.742200] usb usb2: Manufacturer: Linux 2.6.30-btrfsnewformat2 ohci_hcd
[ 2.742254] usb usb2: SerialNumber: 0000:00:02.0
[ 2.742372] usb usb2: configuration #1 chosen from 1 choice
[ 2.742460] hub 2-0:1.0: USB hub found
[ 2.742517] hub 2-0:1.0: 10 ports detected
[ 2.755144] SCSI subsystem initialized
[ 2.770564] libata version 3.00 loaded.
[ 2.774987] sata_nv 0000:00:08.0: version 3.5
[ 2.775278] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
[ 2.775334] PCI: setting IRQ 15 as level-triggered
[ 2.775339] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
[ 2.775487] sata_nv 0000:00:08.0: setting latency timer to 64
[ 2.775547] scsi0 : sata_nv
[ 2.775726] scsi1 : sata_nv
[ 2.775928] ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 15
[ 2.775984] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 15
[ 2.776433] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 5
[ 2.776485] PCI: setting IRQ 5 as level-triggered
[ 2.776490] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 5 (level, low) -> IRQ 5
[ 2.776605] sata_nv 0000:00:08.1: setting latency timer to 64
[ 2.776646] scsi2 : sata_nv
[ 2.776757] scsi3 : sata_nv
[ 2.776955] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa000 irq 5
[ 2.777017] ata4: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0xa008 irq 5
[ 3.252034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.260115] ata1.00: FORCE: horkage modified (noncq)
[ 3.261532] ata1.00: ATA-6: WDC WD1600JD-00GBB0, 02.05D02, max UDMA/100
[ 3.261590] ata1.00: 312581808 sectors, multi 16: LBA48
[ 3.261650] ata1.00: applying bridge limits
[ 3.277461] ata1.00: configured for UDMA/100
[ 3.277610] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JD-00G 02.0 PQ: 0 ANSI: 5
[ 3.744031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.752112] ata2.00: FORCE: horkage modified (noncq)
[ 3.752164] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
[ 3.768125] ata2.00: configured for UDMA/100
[ 3.769647] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
[ 4.095198] ide-gd driver 1.18
[ 4.095280] hda: max request size: 512KiB
[ 4.096622] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 4.098752] hda: cache flushes supported
[ 4.098864] hda:<4>Driver 'sd' needs updating - please use bus_type methods
[ 4.102638] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.102721] sd 0:0:0:0: [sda] Write Protect is off
[ 4.102772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.102789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.102936] sda: hda1 hda2 hda3
[ 4.122929] sda1 sda2 sda3
[ 4.145949] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.148534] Driver 'sr' needs updating - please use bus_type methods
[ 4.152122] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.152199] Uniform CD-ROM driver Revision: 3.20
[ 4.152363] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.158571] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.158654] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.637337] md: raid1 personality registered for level 1
[ 4.639381] xor: automatically using best checksumming function: generic_sse
[ 4.655999] generic_sse: 7437.000 MB/sec
[ 4.656050] xor: using function: generic_sse (7437.000 MB/sec)
[ 4.657235] async_tx: api initialized (async)
[ 4.724003] raid6: int64x1 2213 MB/s
[ 4.792003] raid6: int64x2 2859 MB/s
[ 4.860003] raid6: int64x4 2230 MB/s
[ 4.928023] raid6: int64x8 2016 MB/s
[ 4.996012] raid6: sse2x1 1134 MB/s
[ 5.064029] raid6: sse2x2 1923 MB/s
[ 5.132015] raid6: sse2x4 2858 MB/s
[ 5.132065] raid6: using algorithm sse2x4 (2858 MB/s)
[ 5.134979] md: raid6 personality registered for level 6
[ 5.135034] md: raid5 personality registered for level 5
[ 5.135085] md: raid4 personality registered for level 4
[ 5.249840] md: md0 stopped.
[ 5.298348] md: bind<hda1>
[ 5.298578] md: bind<sda1>
[ 5.299828] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.304534] md0: unknown partition table
[ 5.378608] md: md1 stopped.
[ 5.380345] md: bind<hda2>
[ 5.380565] md: bind<sda2>
[ 5.380630] md: md1: raid array is not clean -- starting background reconstruction
[ 5.381935] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.382983] md1: unknown partition table
[ 5.416229] device-mapper: uevent: version 1.0.3
[ 5.416390] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.590278] PM: Starting manual resume from disk
[ 5.605243] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.605300] EXT3-fs: write access will be enabled during recovery.
[ 5.794093] md: resync of RAID array md1
[ 5.794146] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 5.794208] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 5.799994] md: using 128k window, over a total of 151364352 blocks.
[ 5.800066] md: resuming resync of md1 from checkpoint.
[ 6.368190] kjournald starting. Commit interval 5 seconds
[ 6.368257] EXT3-fs: recovery complete.
[ 6.368639] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.686591] udev: starting version 141
[ 7.896800] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.896877] ACPI: Power Button [PWRF]
[ 7.897056] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 7.897132] ACPI: Power Button [PWRB]
[ 7.941158] processor ACPI_CPU:00: registered as cooling_device0
[ 7.941420] processor ACPI_CPU:01: registered as cooling_device1
[ 8.041187] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.041285] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.049590] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.133366] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.155529] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.168847] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.261457] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 8.261532] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 8.855831] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.953757] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
[ 8.953816] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11
[ 8.954053] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 9.699697] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 9.699868] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 11.993293] Adding 3943948k swap on /dev/sda3. Priority:-1 extents:1 across:3943948k
[ 12.021416] Adding 3943948k swap on /dev/hda3. Priority:-2 extents:1 across:3943948k
[ 12.190096] EXT3 FS on dm-0, internal journal
[ 12.290058] loop: module loaded
[ 13.251123] kjournald starting. Commit interval 5 seconds
[ 13.251585] EXT3 FS on md0, internal journal
[ 13.251663] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.373002] EXT4-fs: barriers enabled
[ 13.387820] kjournald2 starting: pid 2331, dev dm-3:8, commit interval 5 seconds
[ 13.388376] EXT4 FS on dm-3, internal journal on dm-3:8
[ 13.388427] EXT4-fs: delayed allocation enabled
[ 13.388477] EXT4-fs: file extents enabled
[ 13.389783] EXT4-fs: mballoc enabled
[ 13.389845] EXT4-fs: recovery complete.
[ 13.389895] EXT4-fs: mounted filesystem dm-3 with ordered data mode
[ 14.323829] Bridge firewalling registered
[ 14.348389] device eth1 entered promiscuous mode
[ 14.492398] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 14.548079] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 14.549806] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.798469] Loading iSCSI transport class v2.0-870.
[ 17.833250] iscsi: registered transport (tcp)
[ 17.903893] iscsi: registered transport (iser)
[ 18.357761] RPC: Registered udp transport module.
[ 18.357829] RPC: Registered tcp transport module.
[ 18.424550] Slow work thread pool: Starting up
[ 18.424954] Slow work thread pool: Ready
[ 18.425053] FS-Cache: Loaded
[ 18.465121] FS-Cache: Netfs 'nfs' registered for caching
[ 18.494004] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 25.328011] br0: no IPv6 routers present
[ 27.568010] torbr: no IPv6 routers present
[ 81.471785] svc: failed to register lockdv1 RPC service (errno 97).
[ 81.513577] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 81.516209] NFSD: starting 90-second grace period
[ 81.558659] virbr1: starting userspace STP failed, starting kernel STP
[ 81.714660] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 83.275876] tun: Universal TUN/TAP device driver, 1.6
[ 83.275930] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 83.281044] device vnet0 entered promiscuous mode
[ 83.284951] br0: port 2(vnet0) entering learning state
[ 83.414681] br0: port 2(vnet0) entering disabled state
[ 83.429354] device vnet0 left promiscuous mode
[ 83.429408] br0: port 2(vnet0) entering disabled state
[ 83.578399] lo: Disabled Privacy Extensions
[ 91.890157] sata_mv 0000:04:04.0: version 1.28
[ 91.890605] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 11
[ 91.890660] sata_mv 0000:04:04.0: PCI INT A -> Link[LNED] -> GSI 11 (level, low) -> IRQ 11
[ 91.890951] sata_mv 0000:04:04.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[ 91.892338] scsi4 : sata_mv
[ 91.892819] scsi5 : sata_mv
[ 91.897506] scsi6 : sata_mv
[ 91.899718] scsi7 : sata_mv
[ 91.899860] scsi8 : sata_mv
[ 91.899964] scsi9 : sata_mv
[ 91.902742] scsi10 : sata_mv
[ 91.907380] scsi11 : sata_mv
[ 91.907501] ata5: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe22000 irq 11
[ 91.907573] ata6: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe24000 irq 11
[ 91.907645] ata7: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe26000 irq 11
[ 91.907717] ata8: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe28000 irq 11
[ 91.907788] ata9: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe32000 irq 11
[ 91.907861] ata10: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe34000 irq 11
[ 91.907932] ata11: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe36000 irq 11
[ 91.908031] ata12: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe38000 irq 11
[ 92.388035] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 92.397243] ata5.00: FORCE: horkage modified (noncq)
[ 92.420054] ata5.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[ 92.420110] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 92.437059] ata5.00: configured for UDMA/133
[ 92.437212] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 92.437413] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 92.437539] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 92.437620] sd 4:0:0:0: [sdb] Write Protect is off
[ 92.437671] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 92.437690] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 92.437861] sdb:<7>virbr1: no IPv6 routers present
[ 92.912033] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 92.928053] ata6.00: FORCE: horkage modified (noncq)
[ 92.952048] ata6.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 92.952104] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 92.984062] ata6.00: configured for UDMA/133
[ 92.984193] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 92.984403] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 92.984530] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 92.984612] sd 5:0:0:0: [sdc] Write Protect is off
[ 92.984663] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 92.984683] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 92.984843] sdc:<6>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 93.476053] ata7.00: FORCE: horkage modified (noncq)
[ 93.485045] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 93.485101] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 93.516062] ata7.00: configured for UDMA/133
[ 93.516212] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 93.516415] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 93.516539] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 93.516623] sd 6:0:0:0: [sdd] Write Protect is off
[ 93.516676] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 93.516695] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 93.516858] sdd:<6>ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 94.008051] ata8.00: FORCE: horkage modified (noncq)
[ 94.040047] ata8.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 94.040103] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 94.072062] ata8.00: configured for UDMA/133
[ 94.072194] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 94.072420] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 94.072562] sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 94.072658] sd 7:0:0:0: [sde] Write Protect is off
[ 94.072720] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 94.072739] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 94.072934] sde:<6>ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 94.564051] ata9.00: FORCE: horkage modified (noncq)
[ 94.564106] ata9.00: ATA-7: WDC WD5000AAKS-65TMA0, 12.01C01, max UDMA/133
[ 94.564161] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 94.588079] ata9.00: configured for UDMA/133
[ 94.588212] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
[ 94.588448] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 94.588479] sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 94.588493] sd 8:0:0:0: [sdf] Write Protect is off
[ 94.588496] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 94.588515] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 94.588617] sdf:<6>ata10: SATA link down (SStatus 0 SControl 300)
[ 95.228028] ata11: SATA link down (SStatus 0 SControl 300)
[ 95.548034] ata12: SATA link down (SStatus 0 SControl 300)
[ 106.021701] sdc1
[ 106.021841] sdb1
[ 106.022058] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 106.022077] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 106.022145] sde1
[ 106.022298] sd 7:0:0:0: [sde] Attached SCSI disk
[ 106.022347] sdf1
[ 106.022447] sdd1
[ 106.022619] sd 8:0:0:0: [sdf] Attached SCSI disk
[ 106.022642] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 167.833988] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 167.834069] ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 167.834070] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 167.834078] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 167.834086] ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 167.834087] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 167.834090] ata9.00: status: { DRDY }
[ 167.834095] ata9: hard resetting link
[ 167.834492] ata5.00: status: { DRDY }
[ 167.834545] ata5: hard resetting link
[ 167.864494] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 167.864555] ata7.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 167.864556] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 167.864563] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 167.864569] ata6.00: cmd 25/00:08:bf:4b:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 167.864570] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 167.864572] ata6.00: status: { DRDY }
[ 167.864575] ata6: hard resetting link
[ 167.864976] ata7.00: status: { DRDY }
[ 167.879994] ata7: hard resetting link
[ 167.880076] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 167.880138] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[ 167.880139] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 167.880276] ata8.00: status: { DRDY }
[ 167.880325] ata8: hard resetting link
[ 168.344032] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.344218] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.348039] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.353026] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.360085] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.388092] ata5.00: configured for UDMA/133
[ 168.388154] ata5: EH complete
[ 168.392387] ata9.00: configured for UDMA/133
[ 168.392444] ata9: EH complete
[ 168.408224] ata6.00: configured for UDMA/133
[ 168.408283] ata6: EH complete
[ 168.412163] ata7.00: configured for UDMA/133
[ 168.412217] ata7: EH complete
[ 168.440063] ata8.00: configured for UDMA/133
[ 168.440127] ata8: EH complete
[ 223.819032] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 223.819096] ata5.00: cmd 25/00:06:c1:4b:38/00:00:3a:00:00/e0 tag 0 dma 3072 in
[ 223.819097] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 223.819236] ata5.00: status: { DRDY }
[ 223.819287] ata5: hard resetting link
[ 223.849720] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 223.849783] ata7.00: cmd 25/00:06:c1:4b:38/00:00:3a:00:00/e0 tag 0 dma 3072 in
[ 223.849785] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 223.849811] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 223.849820] ata9.00: cmd 25/00:06:c1:4b:38/00:00:3a:00:00/e0 tag 0 dma 3072 in
[ 223.849821] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 223.849823] ata9.00: status: { DRDY }
[ 223.849828] ata9: hard resetting link
[ 223.850206] ata7.00: status: { DRDY }
[ 223.850256] ata7: hard resetting link
[ 223.865327] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 223.865389] ata8.00: cmd 25/00:06:c1:4b:38/00:00:3a:00:00/e0 tag 0 dma 3072 in
[ 223.865390] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 223.865529] ata8.00: status: { DRDY }
[ 223.865579] ata8: hard resetting link
[ 224.316031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 224.325380] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 224.333571] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 224.340246] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 224.349114] ata5.00: configured for UDMA/133
[ 224.349186] ata5: EH complete
[ 224.372065] ata9.00: configured for UDMA/133
[ 224.372124] ata9: EH complete
[ 224.388089] ata7.00: configured for UDMA/133
[ 224.388156] ata7: EH complete
[ 224.420059] ata8.00: configured for UDMA/133
[ 224.420145] ata8: EH complete
[ 254.819013] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 254.819107] ata5.00: cmd 25/00:06:c1:4b:38/00:00:3a:00:00/e0 tag 0 dma 3072 in
[ 254.819108] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 254.819277] ata5.00: status: { DRDY }
[ 254.819338] ata5: hard resetting link
[ 254.849782] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 254.849844] ata7.00: cmd 25/00:06:c1:4b:38/00:00:3a:00:00/e0 tag 0 dma 3072 in
[ 254.849845] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 254.849862] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 254.849870] ata8.00: cmd 25/00:06:c1:4b:38/00:00:3a:00:00/e0 tag 0 dma 3072 in
[ 254.849871] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 254.849874] ata8.00: status: { DRDY }
[ 254.849879] ata8: hard resetting link
[ 254.850263] ata7.00: status: { DRDY }
[ 254.850313] ata7: hard resetting link
[ 254.865370] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 254.865431] ata9.00: cmd 25/00:06:c1:4b:38/00:00:3a:00:00/e0 tag 0 dma 3072 in
[ 254.865432] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 254.865570] ata9.00: status: { DRDY }
[ 254.865619] ata9: hard resetting link
[ 255.316032] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 255.324366] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 255.332034] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 255.340247] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 255.356110] ata5.00: configured for UDMA/133
[ 255.356211] ata5: EH complete
[ 255.380106] ata7.00: configured for UDMA/133
[ 255.380116] ata9.00: configured for UDMA/133
[ 255.380124] ata9: EH complete
[ 255.380262] ata7: EH complete
[ 255.412061] ata8.00: configured for UDMA/133
[ 255.412115] ata8: EH complete
[ 287.819025] ata7: limiting SATA link speed to 1.5 Gbps
[ 287.819093] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 287.819164] ata7.00: cmd c8/00:90:20:00:00/00:00:00:00:00/e0 tag 0 dma 73728 in
[ 287.819165] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 287.819335] ata7.00: status: { DRDY }
[ 287.819397] ata7: hard resetting link
[ 288.292033] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 288.364062] ata7.00: configured for UDMA/133
[ 288.364124] ata7: EH complete
[ 318.819016] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 318.819097] ata7.00: cmd c8/00:90:20:00:00/00:00:00:00:00/e0 tag 0 dma 73728 in
[ 318.819099] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 318.819238] ata7.00: status: { DRDY }
[ 318.819289] ata7: hard resetting link
[ 319.292030] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 319.340123] ata7.00: configured for UDMA/133
[ 319.340182] ata7: EH complete
[ 351.831002] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 351.831080] ata7.00: cmd 25/00:c0:b0:00:00/00:01:00:00:00/e0 tag 0 dma 229376 in
[ 351.831081] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 351.831218] ata7.00: status: { DRDY }
[ 351.831269] ata7: hard resetting link
[ 352.304031] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 352.376061] ata7.00: configured for UDMA/133
[ 352.376129] ata7: EH complete
[ 382.831066] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 382.831130] ata7.00: cmd 25/00:c0:b0:00:00/00:01:00:00:00/e0 tag 0 dma 229376 in
[ 382.831131] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 382.831269] ata7.00: status: { DRDY }
[ 382.831321] ata7: hard resetting link
[ 383.304029] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 383.352106] ata7.00: configured for UDMA/133
[ 383.352219] ata7: EH complete
[-- Attachment #1.4: sata_mv-dmesg.nomsi.log --]
[-- Type: text/plain, Size: 60095 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-btrfsnewformat2 (2.6.30) (root@slimer) (gcc version 4.3.3 (Debian 4.3.3-15) ) #3 SMP Mon Aug 3 18:09:53 GMT 2009
[ 0.000000] Command line: root=/dev/mapper/slimerroot-root ro pci=nomsi
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffc0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffc0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffc0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ 14000-1c000
[ 0.000000] RAMDISK: 37753000 - 37fef542
[ 0.000000] ACPI: RSDP 00000000000fb800 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffc0100 00054 (v01 A_M_I_ OEMXSDT 09000710 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffc0290 000F4 (v03 A_M_I_ OEMFACP 09000710 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffc05c0 051BD (v01 A0653 A0653000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 00000000cffce000 00040
[ 0.000000] ACPI: APIC 00000000cffc0390 00070 (v01 A_M_I_ OEMAPIC 09000710 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffc0400 0003C (v01 A_M_I_ OEMMCFG 09000710 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffce040 00060 (v01 A_M_I_ AMI_OEM 09000710 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffc5780 00038 (v01 A_M_I_ OEMHPET0 09000710 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffc57c0 00248 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [0000000000017000 - 000000000001efff]
[ 0.000000] bootmap [000000000001f000 - 0000000000054fff] pages 36
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d38cc] TEXT DATA BSS ==> [0000200000 - 00007d38cc]
[ 0.000000] #3 [0037753000 - 0037fef542] RAMDISK ==> [0037753000 - 0037fef542]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00007d4000 - 00007d4290] BRK ==> [00007d4000 - 00007d4290]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000017000] PGTABLE ==> [0000014000 - 0000017000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20005ffffff] PMD -> [ffff880028200000-ffff88002d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000cffc0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572683
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1601 pages reserved
[ 0.000000] DMA zone: 2322 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833528 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000
[ 0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028034000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1546890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/slimerroot-root ro pci=nomsi
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 2410.938 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 20000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 6121788k/7077888k available (2784k kernel code, 787156k absent, 168944k reserved, 1376k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.87 BogoMIPS (lpj=9643752)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006483] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009167] Mount-cache hash table entries: 256
[ 0.009387] Initializing cgroup subsys ns
[ 0.009438] Initializing cgroup subsys cpuacct
[ 0.009489] Initializing cgroup subsys devices
[ 0.009539] Initializing cgroup subsys freezer
[ 0.009589] Initializing cgroup subsys net_cls
[ 0.009669] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.009726] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.009776] CPU 0/0x0 -> Node 0
[ 0.009823] tseg: 0000000000
[ 0.009834] CPU: Physical Processor ID: 0
[ 0.009885] CPU: Processor Core ID: 0
[ 0.009940] using C1E aware idle routine
[ 0.010604] ACPI: Core revision 20090320
[ 0.017452] Setting APIC routing to flat
[ 0.017950] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.024001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.024001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.024001] ..... (found apic 0 pin 0) ...
[ 0.065543] ....... works.
[ 0.065589] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4821.87 BogoMIPS (lpj=9643745)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.152337] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.152869] Brought up 2 CPUs
[ 0.152916] Total of 2 processors activated (9643.74 BogoMIPS).
[ 0.153071] CPU0 attaching sched-domain:
[ 0.153074] domain 0: span 0-1 level MC
[ 0.153076] groups: 0 1
[ 0.153081] CPU1 attaching sched-domain:
[ 0.153083] domain 0: span 0-1 level MC
[ 0.153085] groups: 1 0
[ 0.153141] net_namespace: 1936 bytes
[ 0.153141] Booting paravirtualized kernel on bare hardware
[ 0.153141] regulator: core version 0.5
[ 0.153141] NET: Registered protocol family 16
[ 0.153141] node 0 link 0: io port [1000, ffffff]
[ 0.153141] TOM: 00000000d0000000 aka 3328M
[ 0.153141] node 0 link 0: mmio [e0000000, efffffff]
[ 0.153141] node 0 link 0: mmio [a0000, bffff]
[ 0.153141] node 0 link 0: mmio [d0000000, fe0bffff]
[ 0.153141] TOM2: 00000001b0000000 aka 6912M
[ 0.153141] bus: [00,ff] on node 0 link 0
[ 0.153141] bus: 00 index 0 io port: [0, ffff]
[ 0.153141] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.153141] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.153141] bus: 00 index 3 mmio: [1b0000000, fcffffffff]
[ 0.153141] ACPI: bus type pci registered
[ 0.153141] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.153141] PCI: Not using MMCONFIG.
[ 0.153141] PCI: Using configuration type 1 for base access
[ 0.156080] bio: create slab <bio-0> at 0
[ 0.160594] ACPI: EC: Look up EC in DSDT
[ 0.172346] ACPI: Interpreter enabled
[ 0.172397] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.172600] ACPI: Using IOAPIC for interrupt routing
[ 0.172703] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.179187] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.189553] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.200114] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - E5, should be D8 [20090320]
[ 0.200310] ACPI: No dock devices found.
[ 0.200424] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.200508] pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f]
[ 0.200508] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.200508] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.200508] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.200508] pci 0000:00:01.1: PME# disabled
[ 0.200508] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfbff000-0xdfbfffff]
[ 0.200508] pci 0000:00:02.0: supports D1 D2
[ 0.200508] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200508] pci 0000:00:02.0: PME# disabled
[ 0.200508] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfbfec00-0xdfbfecff]
[ 0.200531] pci 0000:00:02.1: supports D1 D2
[ 0.200533] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200588] pci 0000:00:02.1: PME# disabled
[ 0.200691] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfbf8000-0xdfbfbfff]
[ 0.200714] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.200768] pci 0000:00:05.0: PME# disabled
[ 0.200848] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.200881] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfbfd000-0xdfbfdfff]
[ 0.200885] pci 0000:00:07.0: reg 14 io port: [0xb480-0xb487]
[ 0.200904] pci 0000:00:07.0: supports D1 D2
[ 0.200906] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200962] pci 0000:00:07.0: PME# disabled
[ 0.201031] pci 0000:00:08.0: reg 10 io port: [0xb400-0xb407]
[ 0.201034] pci 0000:00:08.0: reg 14 io port: [0xb080-0xb083]
[ 0.201037] pci 0000:00:08.0: reg 18 io port: [0xb000-0xb007]
[ 0.201041] pci 0000:00:08.0: reg 1c io port: [0xac00-0xac03]
[ 0.201044] pci 0000:00:08.0: reg 20 io port: [0xa880-0xa88f]
[ 0.201048] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfbfc000-0xdfbfcfff]
[ 0.201076] pci 0000:00:08.1: reg 10 io port: [0xa800-0xa807]
[ 0.201079] pci 0000:00:08.1: reg 14 io port: [0xa480-0xa483]
[ 0.201082] pci 0000:00:08.1: reg 18 io port: [0xa400-0xa407]
[ 0.201086] pci 0000:00:08.1: reg 1c io port: [0xa080-0xa083]
[ 0.201089] pci 0000:00:08.1: reg 20 io port: [0xa000-0xa00f]
[ 0.201092] pci 0000:00:08.1: reg 24 32bit mmio: [0xdfbf3000-0xdfbf3fff]
[ 0.201134] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201188] pci 0000:00:09.0: PME# disabled
[ 0.201263] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201318] pci 0000:00:0b.0: PME# disabled
[ 0.201392] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201446] pci 0000:00:0c.0: PME# disabled
[ 0.201589] pci 0000:01:03.0: reg 10 32bit mmio: [0xdfcff800-0xdfcfffff]
[ 0.201595] pci 0000:01:03.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.201624] pci 0000:01:03.0: supports D2
[ 0.201626] pci 0000:01:03.0: PME# supported from D2 D3hot D3cold
[ 0.201680] pci 0000:01:03.0: PME# disabled
[ 0.201756] pci 0000:01:0a.0: reg 10 32bit mmio: [0xdfc00000-0xdfc7ffff]
[ 0.201762] pci 0000:01:0a.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.201779] pci 0000:01:0a.0: reg 30 32bit mmio: [0xdfce0000-0xdfceffff]
[ 0.201792] pci 0000:01:0a.0: supports D1 D2
[ 0.201814] pci 0000:00:04.0: transparent bridge
[ 0.201868] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
[ 0.201871] pci 0000:00:04.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.201874] pci 0000:00:04.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.201908] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.201964] pci 0000:02:00.0: PME# disabled
[ 0.202050] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.202104] pci 0000:02:00.2: PME# disabled
[ 0.202189] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.202192] pci 0000:00:09.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.202267] pci 0000:04:04.0: reg 10 64bit mmio: [0xdfe00000-0xdfefffff]
[ 0.202273] pci 0000:04:04.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.202335] pci 0000:02:00.2: bridge io port: [0xd000-0xdfff]
[ 0.202338] pci 0000:02:00.2: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.202395] pci 0000:05:00.0: reg 10 32bit mmio: [0xdffe0000-0xdfffffff]
[ 0.202404] pci 0000:05:00.0: reg 14 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.202412] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
[ 0.202440] pci 0000:05:00.0: reg 30 32bit mmio: [0xdffa0000-0xdffbffff]
[ 0.202477] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.202536] pci 0000:05:00.0: PME# disabled
[ 0.202631] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
[ 0.202633] pci 0000:00:0b.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.202677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.202843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.202957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.203021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.203085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.212215] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.212702] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.213189] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.213643] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.214128] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.214609] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.215299] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.215782] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.216436] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 0.216891] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.217344] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.217798] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.218254] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.218735] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.219215] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.219668] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.220188] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 0.220641] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.221134] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.221449] usbcore: registered new interface driver usbfs
[ 0.221449] usbcore: registered new interface driver hub
[ 0.221449] usbcore: registered new device driver usb
[ 0.221449] PCI: Using ACPI for IRQ routing
[ 0.232117] PCI-DMA: Disabling AGP.
[ 0.232239] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.232239] PCI-DMA: using GART IOMMU.
[ 0.232239] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.232651] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.232813] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.240011] Switched to high resolution mode on CPU 0
[ 0.240349] Switched to high resolution mode on CPU 1
[ 0.244012] pnp: PnP ACPI init
[ 0.244079] ACPI: bus type pnp registered
[ 0.251755] pnp: PnP ACPI: found 15 devices
[ 0.251806] ACPI: ACPI bus type pnp unregistered
[ 0.251866] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.251920] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.251974] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.252044] system 00:07: ioport range 0x580-0x5ff has been reserved
[ 0.252100] system 00:07: ioport range 0x800-0x87f could not be reserved
[ 0.252154] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.252208] system 00:07: ioport range 0xd00-0xd7f has been reserved
[ 0.252262] system 00:07: ioport range 0xd80-0xdff has been reserved
[ 0.252320] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.252374] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.252429] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.252485] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.252543] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.252598] system 00:07: iomem range 0xffb80000-0xffffffff has been reserved
[ 0.252656] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.252712] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.252771] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.252828] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.252882] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.252935] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.252991] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.253054] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.253113] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.253167] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.253222] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.253292] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
[ 0.258385] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.258439] pci 0000:00:04.0: IO window: 0xc000-0xcfff
[ 0.258492] pci 0000:00:04.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.258546] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.258620] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.258673] pci 0000:02:00.0: IO window: disabled
[ 0.258725] pci 0000:02:00.0: MEM window: disabled
[ 0.258776] pci 0000:02:00.0: PREFETCH window: disabled
[ 0.258830] pci 0000:02:00.2: PCI bridge, secondary bus 0000:04
[ 0.258886] pci 0000:02:00.2: IO window: 0xd000-0xdfff
[ 0.258940] pci 0000:02:00.2: MEM window: 0xdfd00000-0xdfefffff
[ 0.258994] pci 0000:02:00.2: PREFETCH window: disabled
[ 0.259050] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.259102] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.259154] pci 0000:00:09.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.259208] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.259260] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05
[ 0.259313] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.259366] pci 0000:00:0b.0: MEM window: 0xdff00000-0xdfffffff
[ 0.259419] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.259472] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:06
[ 0.259524] pci 0000:00:0c.0: IO window: disabled
[ 0.259575] pci 0000:00:0c.0: MEM window: disabled
[ 0.259626] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.259685] pci 0000:00:04.0: setting latency timer to 64
[ 0.259690] pci 0000:00:09.0: setting latency timer to 64
[ 0.259695] pci 0000:02:00.0: setting latency timer to 64
[ 0.259700] pci 0000:02:00.2: setting latency timer to 64
[ 0.259704] pci 0000:00:0b.0: setting latency timer to 64
[ 0.259708] pci 0000:00:0c.0: setting latency timer to 64
[ 0.259711] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.259713] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.259716] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.259718] pci_bus 0000:01: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.259720] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.259723] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.259725] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.259728] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.259730] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.259732] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.259734] pci_bus 0000:04: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.259737] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.259739] pci_bus 0000:05: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.259837] NET: Registered protocol family 2
[ 0.288273] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.290833] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.296071] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.296755] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.296811] TCP reno registered
[ 0.304126] NET: Registered protocol family 1
[ 0.304232] Trying to unpack rootfs image as initramfs...
[ 0.499642] Freeing initrd memory: 8817k freed
[ 0.506465] audit: initializing netlink socket (disabled)
[ 0.506531] type=2000 audit(1249502224.504:1): initialized
[ 0.507087] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.507302] VFS: Disk quotas dquot_6.5.2
[ 0.507391] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.507506] msgmni has been set to 11973
[ 0.507754] alg: No test for stdrng (krng)
[ 0.507873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.507943] io scheduler noop registered
[ 0.507992] io scheduler anticipatory registered
[ 0.508056] io scheduler deadline registered
[ 0.508135] io scheduler cfq registered (default)
[ 1.032401] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.032496] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.032600] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.032703] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.032805] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.032914] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.033029] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.033144] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.033204] pci 0000:01:0a.0: Boot video device
[ 1.033367] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 1.033477] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.033582] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.037493] Linux agpgart interface v0.103
[ 1.037545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.037722] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.038209] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.039996] brd: module loaded
[ 1.040146] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.040420] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.040473] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.040679] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.040888] mice: PS/2 mouse device common for all mice
[ 1.041008] rtc_cmos 00:02: RTC can wake from S4
[ 1.041151] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.041242] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.041327] cpuidle: using governor ladder
[ 1.041376] cpuidle: using governor menu
[ 1.041428] No iBFT detected.
[ 1.041812] TCP cubic registered
[ 1.041952] NET: Registered protocol family 10
[ 1.042476] lo: Disabled Privacy Extensions
[ 1.042804] Mobile IPv6
[ 1.042851] NET: Registered protocol family 17
[ 1.043056] registered taskstats version 1
[ 1.043298] rtc_cmos 00:02: setting system clock to 2009-08-05 19:57:05 UTC (1249502225)
[ 1.043429] Freeing unused kernel memory: 560k freed
[ 1.048871] Write protecting the kernel read-only data: 3772k
[ 1.058753] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.204664] FDC 0 is a post-1991 82077
[ 1.209557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.210005] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 1.210060] alloc irq_desc for 23 on cpu 0 node 0
[ 1.210062] alloc kstat_irqs on cpu 0 node 0
[ 1.210072] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 1.210176] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.210179] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.210320] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.210424] ehci_hcd 0000:00:02.1: debug port 1
[ 1.210476] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.210496] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdfbfec00
[ 1.214519] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 1.214578] alloc irq_desc for 19 on cpu 0 node 0
[ 1.214580] alloc kstat_irqs on cpu 0 node 0
[ 1.214591] firewire_ohci 0000:01:03.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 1.224067] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.224151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.224205] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.224276] usb usb1: Product: EHCI Host Controller
[ 1.224326] usb usb1: Manufacturer: Linux 2.6.30-btrfsnewformat2 ehci_hcd
[ 1.224380] usb usb1: SerialNumber: 0000:00:02.1
[ 1.224503] usb usb1: configuration #1 chosen from 1 choice
[ 1.224582] hub 1-0:1.0: USB hub found
[ 1.224638] hub 1-0:1.0: 10 ports detected
[ 1.227279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.227724] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 1.227778] alloc irq_desc for 22 on cpu 0 node 0
[ 1.227780] alloc kstat_irqs on cpu 0 node 0
[ 1.227790] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 1.227894] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.227896] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.228089] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.228187] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdfbff000
[ 1.238623] Uniform Multi-Platform E-IDE driver
[ 1.268619] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 1.268675] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.269178] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18
[ 1.269236] alloc irq_desc for 18 on cpu 0 node 0
[ 1.269239] alloc kstat_irqs on cpu 0 node 0
[ 1.269249] e1000e 0000:05:00.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18
[ 1.269332] e1000e 0000:05:00.0: setting latency timer to 64
[ 1.269449] 0000:05:00.0: 0000:05:00.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts.
[ 1.286084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.286142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.286214] usb usb2: Product: OHCI Host Controller
[ 1.286265] usb usb2: Manufacturer: Linux 2.6.30-btrfsnewformat2 ohci_hcd
[ 1.286319] usb usb2: SerialNumber: 0000:00:02.0
[ 1.286442] usb usb2: configuration #1 chosen from 1 choice
[ 1.286525] hub 2-0:1.0: USB hub found
[ 1.286582] hub 2-0:1.0: 10 ports detected
[ 1.287541] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.287958] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 1.288059] alloc irq_desc for 21 on cpu 0 node 0
[ 1.288061] alloc kstat_irqs on cpu 0 node 0
[ 1.288072] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 1.288146] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.300062] firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
[ 1.451166] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:24:85:7a
[ 1.451239] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.451370] 0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50855-002
[ 1.452846] udev: renamed network interface eth0 to eth1
[ 1.796090] firewire_core: created device fw0: GUID 0011d80000f46d61, S400
[ 1.808860] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:18:f3:aa:18:da
[ 1.808935] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.809359] amd74xx 0000:00:06.0: UDMA133 controller
[ 1.809411] amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
[ 1.809485] amd74xx 0000:00:06.0: IDE port disabled
[ 1.809543] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
[ 1.809616] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 1.809674] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.809727] Probing IDE interface ide0...
[ 2.096106] hda: WDC WD1600JB-00GVA0, ATA DISK drive
[ 2.768042] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.769290] hda: UDMA/100 mode selected
[ 2.770625] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.807205] SCSI subsystem initialized
[ 2.822111] libata version 3.00 loaded.
[ 2.825722] sata_nv 0000:00:08.0: version 3.5
[ 2.826062] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 2.826119] alloc irq_desc for 20 on cpu 0 node 0
[ 2.826121] alloc kstat_irqs on cpu 0 node 0
[ 2.826130] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 2.826270] sata_nv 0000:00:08.0: setting latency timer to 64
[ 2.826335] scsi0 : sata_nv
[ 2.826570] scsi1 : sata_nv
[ 2.826768] ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 20
[ 2.826824] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 20
[ 2.827228] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 2.827282] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 2.827390] sata_nv 0000:00:08.1: setting latency timer to 64
[ 2.827427] scsi2 : sata_nv
[ 2.827572] scsi3 : sata_nv
[ 2.827763] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa000 irq 23
[ 2.827821] ata4: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0xa008 irq 23
[ 2.899918] ide-gd driver 1.18
[ 2.899999] hda: max request size: 512KiB
[ 2.901344] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 2.903465] hda: cache flushes supported
[ 2.903558] hda: hda1 hda2 hda3
[ 3.300036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.309434] ata1.00: ATA-6: WDC WD1600JD-00GBB0, 02.05D02, max UDMA/100
[ 3.309488] ata1.00: 312581808 sectors, multi 16: LBA48
[ 3.309548] ata1.00: applying bridge limits
[ 3.325461] ata1.00: configured for UDMA/100
[ 3.325597] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JD-00G 02.0 PQ: 0 ANSI: 5
[ 3.792033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.800113] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
[ 3.816136] ata2.00: configured for UDMA/100
[ 3.817542] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
[ 4.149265] Driver 'sd' needs updating - please use bus_type methods
[ 4.149447] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.149532] sd 0:0:0:0: [sda] Write Protect is off
[ 4.149583] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.149600] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.149753] sda: sda1 sda2 sda3
[ 4.189351] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.191758] Driver 'sr' needs updating - please use bus_type methods
[ 4.195233] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.195309] Uniform CD-ROM driver Revision: 3.20
[ 4.195460] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.202264] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.202350] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.563414] md: raid1 personality registered for level 1
[ 4.565354] xor: automatically using best checksumming function: generic_sse
[ 4.585006] generic_sse: 7436.000 MB/sec
[ 4.585056] xor: using function: generic_sse (7436.000 MB/sec)
[ 4.585897] async_tx: api initialized (async)
[ 4.653025] raid6: int64x1 2253 MB/s
[ 4.721023] raid6: int64x2 2887 MB/s
[ 4.789022] raid6: int64x4 2234 MB/s
[ 4.857026] raid6: int64x8 2020 MB/s
[ 4.925011] raid6: sse2x1 1136 MB/s
[ 4.993032] raid6: sse2x2 1942 MB/s
[ 5.061018] raid6: sse2x4 2857 MB/s
[ 5.061068] raid6: using algorithm sse2x4 (2857 MB/s)
[ 5.063973] md: raid6 personality registered for level 6
[ 5.064046] md: raid5 personality registered for level 5
[ 5.064097] md: raid4 personality registered for level 4
[ 5.179315] md: md0 stopped.
[ 5.228977] md: bind<hda1>
[ 5.229211] md: bind<sda1>
[ 5.230744] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.235511] md0: unknown partition table
[ 5.334286] md: md1 stopped.
[ 5.335989] md: bind<hda2>
[ 5.336209] md: bind<sda2>
[ 5.336272] md: md1: raid array is not clean -- starting background reconstruction
[ 5.337563] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.338672] md1: unknown partition table
[ 5.394201] device-mapper: uevent: version 1.0.3
[ 5.394571] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.539374] PM: Starting manual resume from disk
[ 5.582500] kjournald starting. Commit interval 5 seconds
[ 5.582509] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.762349] udev: starting version 141
[ 7.169360] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.169437] ACPI: Power Button [PWRF]
[ 7.169563] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 7.169642] ACPI: Power Button [PWRB]
[ 7.241240] processor ACPI_CPU:00: registered as cooling_device0
[ 7.241496] processor ACPI_CPU:01: registered as cooling_device1
[ 8.225247] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.225346] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.229387] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.235375] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.238064] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.370730] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.392902] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 8.392975] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 8.459635] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.487594] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 8.487652] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 8.487891] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 9.226307] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 9.226478] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 11.597996] Adding 3943948k swap on /dev/sda3. Priority:-1 extents:1 across:3943948k
[ 11.603477] Adding 3943948k swap on /dev/hda3. Priority:-2 extents:1 across:3943948k
[ 11.771617] md: resync of RAID array md1
[ 11.771669] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 11.771733] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 11.771829] EXT3 FS on dm-0, <6>md: using 128k window, over a total of 151364352 blocks.
[ 11.771834] md: resuming resync of md1 from checkpoint.
[ 11.771978] internal journal
[ 11.958537] loop: module loaded
[ 12.851706] kjournald starting. Commit interval 5 seconds
[ 12.857985] EXT3 FS on md0, internal journal
[ 12.858064] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.966499] EXT4-fs: barriers enabled
[ 12.981308] kjournald2 starting: pid 2342, dev dm-3:8, commit interval 5 seconds
[ 12.985291] EXT4 FS on dm-3, internal journal on dm-3:8
[ 12.985345] EXT4-fs: delayed allocation enabled
[ 12.985394] EXT4-fs: file extents enabled
[ 12.986720] EXT4-fs: mballoc enabled
[ 12.986782] EXT4-fs: mounted filesystem dm-3 with ordered data mode
[ 14.192401] Bridge firewalling registered
[ 14.233579] device eth1 entered promiscuous mode
[ 14.381973] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.679411] Loading iSCSI transport class v2.0-870.
[ 17.735226] iscsi: registered transport (tcp)
[ 17.804174] iscsi: registered transport (iser)
[ 18.311115] RPC: Registered udp transport module.
[ 18.311183] RPC: Registered tcp transport module.
[ 18.360033] Slow work thread pool: Starting up
[ 18.360443] Slow work thread pool: Ready
[ 18.360539] FS-Cache: Loaded
[ 18.400365] FS-Cache: Netfs 'nfs' registered for caching
[ 18.445729] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 25.149010] br0: no IPv6 routers present
[ 27.465010] torbr: no IPv6 routers present
[ 82.029758] virbr1: starting userspace STP failed, starting kernel STP
[ 82.176064] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 82.190733] svc: failed to register lockdv1 RPC service (errno 97).
[ 82.191316] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 82.201011] NFSD: starting 90-second grace period
[ 83.834204] tun: Universal TUN/TAP device driver, 1.6
[ 83.834258] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 83.836916] device vnet0 entered promiscuous mode
[ 83.838611] br0: port 2(vnet0) entering learning state
[ 83.967666] br0: port 2(vnet0) entering disabled state
[ 83.982342] device vnet0 left promiscuous mode
[ 83.982397] br0: port 2(vnet0) entering disabled state
[ 84.101384] lo: Disabled Privacy Extensions
[ 92.184011] virbr1: no IPv6 routers present
[ 122.248048] sata_mv 0000:04:04.0: version 1.28
[ 122.248549] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[ 122.248607] alloc irq_desc for 17 on cpu 0 node 0
[ 122.248609] alloc kstat_irqs on cpu 0 node 0
[ 122.248620] sata_mv 0000:04:04.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17
[ 122.248908] sata_mv 0000:04:04.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[ 122.249916] scsi4 : sata_mv
[ 122.250122] scsi5 : sata_mv
[ 122.250230] scsi6 : sata_mv
[ 122.250328] scsi7 : sata_mv
[ 122.250427] scsi8 : sata_mv
[ 122.250533] scsi9 : sata_mv
[ 122.250633] scsi10 : sata_mv
[ 122.250732] scsi11 : sata_mv
[ 122.250820] ata5: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe22000 irq 17
[ 122.250892] ata6: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe24000 irq 17
[ 122.250962] ata7: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe26000 irq 17
[ 122.251033] ata8: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe28000 irq 17
[ 122.251105] ata9: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe32000 irq 17
[ 122.251176] ata10: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe34000 irq 17
[ 122.251247] ata11: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe36000 irq 17
[ 122.251319] ata12: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe38000 irq 17
[ 122.728030] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 122.760048] ata5.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[ 122.760103] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 122.776077] ata5.00: configured for UDMA/133
[ 122.776233] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 122.776442] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 122.776570] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 122.776652] sd 4:0:0:0: [sdb] Write Protect is off
[ 122.776703] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 122.776721] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 122.776882] sdb:<6>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 123.292050] ata6.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 123.292118] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 123.324059] ata6.00: configured for UDMA/133
[ 123.324212] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 123.324441] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 123.324477] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 123.324490] sd 5:0:0:0: [sdc] Write Protect is off
[ 123.324493] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 123.324511] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 123.324610] sdc:<6>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 123.840047] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 123.840114] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 123.872064] ata7.00: configured for UDMA/133
[ 123.872219] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 123.872439] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 123.872581] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 123.872678] sd 6:0:0:0: [sdd] Write Protect is off
[ 123.872740] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 123.872759] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 123.872938] sdd:<6>ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 124.388049] ata8.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 124.388105] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 124.421907] ata8.00: configured for UDMA/133
[ 124.422035] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 124.422249] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 124.422377] sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 124.422458] sd 7:0:0:0: [sde] Write Protect is off
[ 124.422570] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 124.422589] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 124.422767] sde:<6>ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 124.914177] ata9.00: ATA-7: WDC WD5000AAKS-65TMA0, 12.01C01, max UDMA/133
[ 124.914244] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 124.937462] ata9.00: configured for UDMA/133
[ 124.937588] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
[ 124.937803] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 124.937935] sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 124.938015] sd 8:0:0:0: [sdf] Write Protect is off
[ 124.938123] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 124.938142] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 124.938305] sdf:<6>ata10: SATA link down (SStatus 0 SControl 300)
[ 125.576033] ata11: SATA link down (SStatus 0 SControl 300)
[ 125.896027] ata12: SATA link down (SStatus 0 SControl 300)
[ 152.831031] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 152.831094] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 152.831096] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 152.831235] ata5.00: status: { DRDY }
[ 152.831286] ata5: hard resetting link
[ 153.304030] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 153.344062] ata5.00: configured for UDMA/133
[ 153.344120] ata5: EH complete
[ 153.831050] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 153.831116] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 153.831118] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 153.831256] ata6.00: status: { DRDY }
[ 153.831307] ata6: hard resetting link
[ 154.304031] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 154.376062] ata6.00: configured for UDMA/133
[ 154.381026] ata6: EH complete
[ 154.819003] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 154.819062] ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 154.819063] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 154.819202] ata8.00: status: { DRDY }
[ 154.819252] ata8: hard resetting link
[ 154.834706] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 154.834765] ata7.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 154.834766] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 154.834904] ata7.00: status: { DRDY }
[ 154.834955] ata7: hard resetting link
[ 155.304030] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 155.308044] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 155.376090] ata8.00: configured for UDMA/133
[ 155.376144] ata8: EH complete
[ 155.384060] ata7.00: configured for UDMA/133
[ 155.384113] ata7: EH complete
[ 155.819001] ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 155.819060] ata9.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 155.819061] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 155.819197] ata9.00: status: { DRDY }
[ 155.819247] ata9: hard resetting link
[ 156.292030] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 156.332066] ata9.00: configured for UDMA/133
[ 156.332122] ata9: EH complete
[ 183.820110] ata5.00: NCQ disabled due to excessive errors
[ 183.820168] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 183.820227] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 183.820229] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 183.820365] ata5.00: status: { DRDY }
[ 183.820416] ata5: hard resetting link
[ 184.297029] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 184.329061] ata5.00: configured for UDMA/133
[ 184.329128] ata5: EH complete
[ 184.831001] ata6.00: NCQ disabled due to excessive errors
[ 184.831069] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 184.831141] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 184.831142] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 184.831311] ata6.00: status: { DRDY }
[ 184.831373] ata6: hard resetting link
[ 185.304032] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 185.376062] ata6.00: configured for UDMA/133
[ 185.376119] ata6: EH complete
[ 185.830996] ata8.00: NCQ disabled due to excessive errors
[ 185.831049] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 185.831107] ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 185.831108] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 185.831244] ata8.00: status: { DRDY }
[ 185.831294] ata8: hard resetting link
[ 185.846750] ata7.00: NCQ disabled due to excessive errors
[ 185.846802] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 185.846861] ata7.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 185.846862] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 185.846998] ata7.00: status: { DRDY }
[ 185.847048] ata7: hard resetting link
[ 186.312027] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 186.320353] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 186.392087] ata8.00: configured for UDMA/133
[ 186.392141] ata8: EH complete
[ 186.400060] ata7.00: configured for UDMA/133
[ 186.400125] ata7: EH complete
[ 186.831002] ata9.00: NCQ disabled due to excessive errors
[ 186.831070] ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 186.831142] ata9.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 186.831143] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 186.831312] ata9.00: status: { DRDY }
[ 186.831373] ata9: hard resetting link
[ 187.304031] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 187.344068] ata9.00: configured for UDMA/133
[ 187.344137] ata9: EH complete
[ 214.820125] ata5: limiting SATA link speed to 1.5 Gbps
[ 214.820182] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 214.820242] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 214.820243] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 214.820381] ata5.00: status: { DRDY }
[ 214.820432] ata5: hard resetting link
[ 215.296030] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 215.336062] ata5.00: configured for UDMA/133
[ 215.336119] ata5: EH complete
[ 215.831003] ata6: limiting SATA link speed to 1.5 Gbps
[ 215.831059] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 215.831119] ata6.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 215.831121] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 215.831257] ata6.00: status: { DRDY }
[ 215.831308] ata6: hard resetting link
[ 216.304031] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 216.376062] ata6.00: configured for UDMA/133
[ 216.376118] ata6: EH complete
[ 216.830994] ata8: limiting SATA link speed to 1.5 Gbps
[ 216.831047] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 216.831106] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 216.831107] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 216.831243] ata8.00: status: { DRDY }
[ 216.831294] ata8: hard resetting link
[ 216.846754] ata7: limiting SATA link speed to 1.5 Gbps
[ 216.846805] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 216.846864] ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 216.846865] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 216.847001] ata7.00: status: { DRDY }
[ 216.847051] ata7: hard resetting link
[ 217.312030] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 217.320354] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 217.392091] ata8.00: configured for UDMA/133
[ 217.392147] ata8: EH complete
[ 217.400060] ata7.00: configured for UDMA/133
[ 217.400115] ata7: EH complete
[ 217.830998] ata9: limiting SATA link speed to 1.5 Gbps
[ 217.831062] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 217.831134] ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 217.831135] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 217.831305] ata9.00: status: { DRDY }
[ 217.831365] ata9: hard resetting link
[ 218.304035] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 218.344067] ata9.00: configured for UDMA/133
[ 218.344127] ata9: EH complete
[ 245.819005] ata5.00: limiting speed to UDMA/100:PIO4
[ 245.819074] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 245.819138] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 245.819139] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 245.819279] ata5.00: status: { DRDY }
[ 245.819331] ata5: hard resetting link
[ 246.293030] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 246.333061] ata5.00: configured for UDMA/100
[ 246.333129] ata5: EH complete
[ 246.831005] ata6.00: limiting speed to UDMA/100:PIO4
[ 246.831061] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 246.831121] ata6.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 246.831122] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 246.831262] ata6.00: status: { DRDY }
[ 246.831313] ata6: hard resetting link
[ 247.304033] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 247.376059] ata6.00: configured for UDMA/100
[ 247.376130] ata6: EH complete
[ 247.845991] ata7.00: limiting speed to UDMA/100:PIO4
[ 247.846064] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 247.846080] ata8.00: limiting speed to UDMA/100:PIO4
[ 247.846084] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 247.846091] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 247.846093] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 247.846095] ata8.00: status: { DRDY }
[ 247.846100] ata8: hard resetting link
[ 247.846462] ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 247.846463] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 247.846609] ata7.00: status: { DRDY }
[ 247.846669] ata7: hard resetting link
[ 248.320034] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 248.320292] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 248.393061] ata8.00: configured for UDMA/100
[ 248.393130] ata8: EH complete
[ 248.396064] ata7.00: configured for UDMA/100
[ 248.396138] ata7: EH complete
[ 248.832571] ata9.00: limiting speed to UDMA/100:PIO4
[ 248.832653] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 248.832728] ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 248.832729] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 248.832902] ata9.00: status: { DRDY }
[ 248.832963] ata9: hard resetting link
[ 249.308033] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 249.348064] ata9.00: configured for UDMA/100
[ 249.348131] ata9: EH complete
[-- Attachment #1.5: sata_mv-dmesg.irqpoll.log --]
[-- Type: text/plain, Size: 62916 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-btrfsnewformat2 (2.6.30) (root@slimer) (gcc version 4.3.3 (Debian 4.3.3-15) ) #3 SMP Mon Aug 3 18:09:53 GMT 2009
[ 0.000000] Command line: root=/dev/mapper/slimerroot-root ro irqpoll
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffc0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffc0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffc0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ 14000-1c000
[ 0.000000] RAMDISK: 37753000 - 37fef542
[ 0.000000] ACPI: RSDP 00000000000fb800 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffc0100 00054 (v01 A_M_I_ OEMXSDT 09000710 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffc0290 000F4 (v03 A_M_I_ OEMFACP 09000710 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffc05c0 051BD (v01 A0653 A0653000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 00000000cffce000 00040
[ 0.000000] ACPI: APIC 00000000cffc0390 00070 (v01 A_M_I_ OEMAPIC 09000710 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffc0400 0003C (v01 A_M_I_ OEMMCFG 09000710 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffce040 00060 (v01 A_M_I_ AMI_OEM 09000710 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffc5780 00038 (v01 A_M_I_ OEMHPET0 09000710 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffc57c0 00248 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [0000000000017000 - 000000000001efff]
[ 0.000000] bootmap [000000000001f000 - 0000000000054fff] pages 36
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d38cc] TEXT DATA BSS ==> [0000200000 - 00007d38cc]
[ 0.000000] #3 [0037753000 - 0037fef542] RAMDISK ==> [0037753000 - 0037fef542]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00007d4000 - 00007d4290] BRK ==> [00007d4000 - 00007d4290]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000017000] PGTABLE ==> [0000014000 - 0000017000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20005ffffff] PMD -> [ffff880028200000-ffff88002d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000cffc0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572683
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1601 pages reserved
[ 0.000000] DMA zone: 2322 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833528 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000
[ 0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028034000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1546890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/slimerroot-root ro irqpoll
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2410.659 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 5630000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 6121788k/7077888k available (2784k kernel code, 787156k absent, 168944k reserved, 1376k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.31 BogoMIPS (lpj=9642636)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006483] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009173] Mount-cache hash table entries: 256
[ 0.009391] Initializing cgroup subsys ns
[ 0.009442] Initializing cgroup subsys cpuacct
[ 0.009493] Initializing cgroup subsys devices
[ 0.009543] Initializing cgroup subsys freezer
[ 0.009593] Initializing cgroup subsys net_cls
[ 0.009673] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.009727] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.009777] CPU 0/0x0 -> Node 0
[ 0.009824] tseg: 0000000000
[ 0.009836] CPU: Physical Processor ID: 0
[ 0.009885] CPU: Processor Core ID: 0
[ 0.009940] using C1E aware idle routine
[ 0.010604] ACPI: Core revision 20090320
[ 0.017458] Setting APIC routing to flat
[ 0.017958] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.024001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.024001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.024001] ..... (found apic 0 pin 0) ...
[ 0.065139] ....... works.
[ 0.065188] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4821.86 BogoMIPS (lpj=9643729)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.152352] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.152880] Brought up 2 CPUs
[ 0.152927] Total of 2 processors activated (9643.18 BogoMIPS).
[ 0.153085] CPU0 attaching sched-domain:
[ 0.153088] domain 0: span 0-1 level MC
[ 0.153090] groups: 0 1
[ 0.153095] CPU1 attaching sched-domain:
[ 0.153097] domain 0: span 0-1 level MC
[ 0.153098] groups: 1 0
[ 0.153155] net_namespace: 1936 bytes
[ 0.153155] Booting paravirtualized kernel on bare hardware
[ 0.153155] regulator: core version 0.5
[ 0.153155] NET: Registered protocol family 16
[ 0.153155] node 0 link 0: io port [1000, ffffff]
[ 0.153155] TOM: 00000000d0000000 aka 3328M
[ 0.153155] node 0 link 0: mmio [e0000000, efffffff]
[ 0.153155] node 0 link 0: mmio [a0000, bffff]
[ 0.153155] node 0 link 0: mmio [d0000000, fe0bffff]
[ 0.153155] TOM2: 00000001b0000000 aka 6912M
[ 0.153155] bus: [00,ff] on node 0 link 0
[ 0.153155] bus: 00 index 0 io port: [0, ffff]
[ 0.153155] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.153155] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.153155] bus: 00 index 3 mmio: [1b0000000, fcffffffff]
[ 0.153155] ACPI: bus type pci registered
[ 0.153155] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.153155] PCI: Not using MMCONFIG.
[ 0.153155] PCI: Using configuration type 1 for base access
[ 0.156098] bio: create slab <bio-0> at 0
[ 0.160594] ACPI: EC: Look up EC in DSDT
[ 0.172117] ACPI: Interpreter enabled
[ 0.172168] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.172371] ACPI: Using IOAPIC for interrupt routing
[ 0.172473] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.178924] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.189378] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.200114] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - E5, should be D8 [20090320]
[ 0.200310] ACPI: No dock devices found.
[ 0.200423] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.200507] pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f]
[ 0.200507] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.200507] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.200507] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.200507] pci 0000:00:01.1: PME# disabled
[ 0.200507] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfbff000-0xdfbfffff]
[ 0.200507] pci 0000:00:02.0: supports D1 D2
[ 0.200507] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200507] pci 0000:00:02.0: PME# disabled
[ 0.200507] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfbfec00-0xdfbfecff]
[ 0.200529] pci 0000:00:02.1: supports D1 D2
[ 0.200531] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200586] pci 0000:00:02.1: PME# disabled
[ 0.200689] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfbf8000-0xdfbfbfff]
[ 0.200712] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.200765] pci 0000:00:05.0: PME# disabled
[ 0.200844] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.200876] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfbfd000-0xdfbfdfff]
[ 0.200880] pci 0000:00:07.0: reg 14 io port: [0xb480-0xb487]
[ 0.200899] pci 0000:00:07.0: supports D1 D2
[ 0.200901] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200957] pci 0000:00:07.0: PME# disabled
[ 0.201024] pci 0000:00:08.0: reg 10 io port: [0xb400-0xb407]
[ 0.201027] pci 0000:00:08.0: reg 14 io port: [0xb080-0xb083]
[ 0.201030] pci 0000:00:08.0: reg 18 io port: [0xb000-0xb007]
[ 0.201034] pci 0000:00:08.0: reg 1c io port: [0xac00-0xac03]
[ 0.201037] pci 0000:00:08.0: reg 20 io port: [0xa880-0xa88f]
[ 0.201040] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfbfc000-0xdfbfcfff]
[ 0.201068] pci 0000:00:08.1: reg 10 io port: [0xa800-0xa807]
[ 0.201072] pci 0000:00:08.1: reg 14 io port: [0xa480-0xa483]
[ 0.201075] pci 0000:00:08.1: reg 18 io port: [0xa400-0xa407]
[ 0.201078] pci 0000:00:08.1: reg 1c io port: [0xa080-0xa083]
[ 0.201082] pci 0000:00:08.1: reg 20 io port: [0xa000-0xa00f]
[ 0.201085] pci 0000:00:08.1: reg 24 32bit mmio: [0xdfbf3000-0xdfbf3fff]
[ 0.201126] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201180] pci 0000:00:09.0: PME# disabled
[ 0.201255] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201309] pci 0000:00:0b.0: PME# disabled
[ 0.201383] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201438] pci 0000:00:0c.0: PME# disabled
[ 0.201581] pci 0000:01:03.0: reg 10 32bit mmio: [0xdfcff800-0xdfcfffff]
[ 0.201586] pci 0000:01:03.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.201615] pci 0000:01:03.0: supports D2
[ 0.201617] pci 0000:01:03.0: PME# supported from D2 D3hot D3cold
[ 0.201671] pci 0000:01:03.0: PME# disabled
[ 0.201748] pci 0000:01:0a.0: reg 10 32bit mmio: [0xdfc00000-0xdfc7ffff]
[ 0.201753] pci 0000:01:0a.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.201770] pci 0000:01:0a.0: reg 30 32bit mmio: [0xdfce0000-0xdfceffff]
[ 0.201783] pci 0000:01:0a.0: supports D1 D2
[ 0.201805] pci 0000:00:04.0: transparent bridge
[ 0.201857] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
[ 0.201860] pci 0000:00:04.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.201863] pci 0000:00:04.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.201896] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.201950] pci 0000:02:00.0: PME# disabled
[ 0.202038] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.202092] pci 0000:02:00.2: PME# disabled
[ 0.202178] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.202180] pci 0000:00:09.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.202255] pci 0000:04:04.0: reg 10 64bit mmio: [0xdfe00000-0xdfefffff]
[ 0.202261] pci 0000:04:04.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.202323] pci 0000:02:00.2: bridge io port: [0xd000-0xdfff]
[ 0.202326] pci 0000:02:00.2: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.202383] pci 0000:05:00.0: reg 10 32bit mmio: [0xdffe0000-0xdfffffff]
[ 0.202392] pci 0000:05:00.0: reg 14 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.202400] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
[ 0.202428] pci 0000:05:00.0: reg 30 32bit mmio: [0xdffa0000-0xdffbffff]
[ 0.202464] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.202521] pci 0000:05:00.0: PME# disabled
[ 0.202618] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
[ 0.202621] pci 0000:00:0b.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.202665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.202830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.202944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.203008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.203071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.212199] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.212683] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.213167] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.213622] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.214103] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.214583] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.215034] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.215512] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.216364] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 0.216818] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.217275] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.217739] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.218194] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.218685] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.219165] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.219620] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.220117] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 0.220576] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.221067] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.221382] usbcore: registered new interface driver usbfs
[ 0.221382] usbcore: registered new interface driver hub
[ 0.221382] usbcore: registered new device driver usb
[ 0.221382] PCI: Using ACPI for IRQ routing
[ 0.228133] PCI-DMA: Disabling AGP.
[ 0.228257] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.228257] PCI-DMA: using GART IOMMU.
[ 0.228257] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.228647] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.228812] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.236011] Switched to high resolution mode on CPU 0
[ 0.236349] Switched to high resolution mode on CPU 1
[ 0.240019] pnp: PnP ACPI init
[ 0.240101] ACPI: bus type pnp registered
[ 0.247784] pnp: PnP ACPI: found 15 devices
[ 0.247837] ACPI: ACPI bus type pnp unregistered
[ 0.247897] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.247952] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.248017] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.248071] system 00:07: ioport range 0x580-0x5ff has been reserved
[ 0.248126] system 00:07: ioport range 0x800-0x87f could not be reserved
[ 0.248182] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.248236] system 00:07: ioport range 0xd00-0xd7f has been reserved
[ 0.248290] system 00:07: ioport range 0xd80-0xdff has been reserved
[ 0.248347] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.248401] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.248457] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.248512] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.248569] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.248626] system 00:07: iomem range 0xffb80000-0xffffffff has been reserved
[ 0.248684] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.248739] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.248798] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.248855] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.248909] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.248962] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.249024] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.249082] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.249139] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.249193] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.249248] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.249318] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
[ 0.254411] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.254465] pci 0000:00:04.0: IO window: 0xc000-0xcfff
[ 0.254518] pci 0000:00:04.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.254572] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.254646] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.254699] pci 0000:02:00.0: IO window: disabled
[ 0.254751] pci 0000:02:00.0: MEM window: disabled
[ 0.254803] pci 0000:02:00.0: PREFETCH window: disabled
[ 0.254857] pci 0000:02:00.2: PCI bridge, secondary bus 0000:04
[ 0.254914] pci 0000:02:00.2: IO window: 0xd000-0xdfff
[ 0.254967] pci 0000:02:00.2: MEM window: 0xdfd00000-0xdfefffff
[ 0.255021] pci 0000:02:00.2: PREFETCH window: disabled
[ 0.255077] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.255130] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.255183] pci 0000:00:09.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.255235] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.255288] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05
[ 0.255341] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.255393] pci 0000:00:0b.0: MEM window: 0xdff00000-0xdfffffff
[ 0.255446] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.255498] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:06
[ 0.255550] pci 0000:00:0c.0: IO window: disabled
[ 0.255601] pci 0000:00:0c.0: MEM window: disabled
[ 0.255652] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.255712] pci 0000:00:04.0: setting latency timer to 64
[ 0.255716] pci 0000:00:09.0: setting latency timer to 64
[ 0.255721] pci 0000:02:00.0: setting latency timer to 64
[ 0.255726] pci 0000:02:00.2: setting latency timer to 64
[ 0.255730] pci 0000:00:0b.0: setting latency timer to 64
[ 0.255734] pci 0000:00:0c.0: setting latency timer to 64
[ 0.255738] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.255740] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.255742] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.255745] pci_bus 0000:01: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.255747] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.255749] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.255752] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.255754] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.255757] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.255759] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.255761] pci_bus 0000:04: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.255764] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.255766] pci_bus 0000:05: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.255864] NET: Registered protocol family 2
[ 0.284276] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.286845] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.292091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.292775] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.292833] TCP reno registered
[ 0.300126] NET: Registered protocol family 1
[ 0.300231] Trying to unpack rootfs image as initramfs...
[ 0.495609] Freeing initrd memory: 8817k freed
[ 0.502425] audit: initializing netlink socket (disabled)
[ 0.502493] type=2000 audit(1249502648.500:1): initialized
[ 0.503048] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.503264] VFS: Disk quotas dquot_6.5.2
[ 0.503351] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.503465] msgmni has been set to 11973
[ 0.503714] alg: No test for stdrng (krng)
[ 0.503835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.503906] io scheduler noop registered
[ 0.503955] io scheduler anticipatory registered
[ 0.504021] io scheduler deadline registered
[ 0.504103] io scheduler cfq registered (default)
[ 1.028378] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028473] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028578] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028680] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028782] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028889] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028999] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.029117] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.029180] pci 0000:01:0a.0: Boot video device
[ 1.029369] alloc irq_desc for 24 on cpu 0 node 0
[ 1.029371] alloc kstat_irqs on cpu 0 node 0
[ 1.029379] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
[ 1.029386] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 1.029549] alloc irq_desc for 25 on cpu 0 node 0
[ 1.029551] alloc kstat_irqs on cpu 0 node 0
[ 1.029555] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 1.029561] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.029721] alloc irq_desc for 26 on cpu 0 node 0
[ 1.029723] alloc kstat_irqs on cpu 0 node 0
[ 1.029727] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 1.029733] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.034011] Linux agpgart interface v0.103
[ 1.034064] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.034236] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.034690] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.036411] brd: module loaded
[ 1.036536] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.036793] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.036846] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.037048] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.037259] mice: PS/2 mouse device common for all mice
[ 1.037384] rtc_cmos 00:02: RTC can wake from S4
[ 1.037502] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.037593] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.037690] cpuidle: using governor ladder
[ 1.037739] cpuidle: using governor menu
[ 1.037791] No iBFT detected.
[ 1.038180] TCP cubic registered
[ 1.038325] NET: Registered protocol family 10
[ 1.038848] lo: Disabled Privacy Extensions
[ 1.039177] Mobile IPv6
[ 1.039224] NET: Registered protocol family 17
[ 1.039448] registered taskstats version 1
[ 1.039693] rtc_cmos 00:02: setting system clock to 2009-08-05 20:04:09 UTC (1249502649)
[ 1.039825] Freeing unused kernel memory: 560k freed
[ 1.045079] Write protecting the kernel read-only data: 3772k
[ 1.054836] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.204471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.204630] FDC 0 is a post-1991 82077
[ 1.204948] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 1.205004] alloc irq_desc for 23 on cpu 0 node 0
[ 1.205006] alloc kstat_irqs on cpu 0 node 0
[ 1.205016] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 1.205117] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.205119] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.205260] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.205402] ehci_hcd 0000:00:02.1: debug port 1
[ 1.205484] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.205509] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdfbfec00
[ 1.216986] Uniform Multi-Platform E-IDE driver
[ 1.220022] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.220103] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.220157] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.220227] usb usb1: Product: EHCI Host Controller
[ 1.220277] usb usb1: Manufacturer: Linux 2.6.30-btrfsnewformat2 ehci_hcd
[ 1.220331] usb usb1: SerialNumber: 0000:00:02.1
[ 1.220454] usb usb1: configuration #1 chosen from 1 choice
[ 1.220541] hub 1-0:1.0: USB hub found
[ 1.220598] hub 1-0:1.0: 10 ports detected
[ 1.251508] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.251926] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 1.251981] alloc irq_desc for 22 on cpu 0 node 0
[ 1.251983] alloc kstat_irqs on cpu 0 node 0
[ 1.251994] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.252112] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.253014] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 1.253067] alloc irq_desc for 19 on cpu 0 node 0
[ 1.253069] alloc kstat_irqs on cpu 0 node 0
[ 1.253077] firewire_ohci 0000:01:03.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 1.308844] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.311542] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 1.311600] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.313742] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18
[ 1.313800] alloc irq_desc for 18 on cpu 0 node 0
[ 1.313802] alloc kstat_irqs on cpu 0 node 0
[ 1.313814] e1000e 0000:05:00.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18
[ 1.313892] e1000e 0000:05:00.0: setting latency timer to 64
[ 1.314040] alloc irq_desc for 27 on cpu 0 node 0
[ 1.314042] alloc kstat_irqs on cpu 0 node 0
[ 1.314054] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 1.336050] firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
[ 1.503183] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:24:85:7a
[ 1.503256] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.503387] 0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50855-002
[ 1.505231] udev: renamed network interface eth0 to eth1
[ 1.768858] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:18:f3:aa:18:da
[ 1.768933] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.769332] amd74xx 0000:00:06.0: UDMA133 controller
[ 1.769385] amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
[ 1.769454] amd74xx 0000:00:06.0: IDE port disabled
[ 1.769512] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
[ 1.769584] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 1.769642] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.769695] Probing IDE interface ide0...
[ 1.833076] firewire_core: created device fw0: GUID 0011d80000f46d61, S400
[ 2.056108] hda: WDC WD1600JB-00GVA0, ATA DISK drive
[ 2.728061] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.729287] hda: UDMA/100 mode selected
[ 2.730619] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.759472] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 2.759527] alloc irq_desc for 21 on cpu 0 node 0
[ 2.759529] alloc kstat_irqs on cpu 0 node 0
[ 2.759538] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 2.759643] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.759646] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.759774] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.759870] ohci_hcd 0000:00:02.0: irq 21, io mem 0xdfbff000
[ 2.814017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.814071] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.814140] usb usb2: Product: OHCI Host Controller
[ 2.814191] usb usb2: Manufacturer: Linux 2.6.30-btrfsnewformat2 ohci_hcd
[ 2.814245] usb usb2: SerialNumber: 0000:00:02.0
[ 2.814344] usb usb2: configuration #1 chosen from 1 choice
[ 2.814428] hub 2-0:1.0: USB hub found
[ 2.814485] hub 2-0:1.0: 10 ports detected
[ 2.827951] SCSI subsystem initialized
[ 2.842229] libata version 3.00 loaded.
[ 2.845771] sata_nv 0000:00:08.0: version 3.5
[ 2.846109] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 2.846168] alloc irq_desc for 20 on cpu 0 node 0
[ 2.846170] alloc kstat_irqs on cpu 0 node 0
[ 2.846181] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 2.846328] sata_nv 0000:00:08.0: setting latency timer to 64
[ 2.846388] scsi0 : sata_nv
[ 2.846542] scsi1 : sata_nv
[ 2.846739] ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 20
[ 2.846794] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 20
[ 2.847201] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 2.847254] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 2.847366] sata_nv 0000:00:08.1: setting latency timer to 64
[ 2.847411] scsi2 : sata_nv
[ 2.847513] scsi3 : sata_nv
[ 2.847705] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa000 irq 23
[ 2.847761] ata4: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0xa008 irq 23
[ 3.320036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.329463] ata1.00: ATA-6: WDC WD1600JD-00GBB0, 02.05D02, max UDMA/100
[ 3.329522] ata1.00: 312581808 sectors, multi 16: LBA48
[ 3.329582] ata1.00: applying bridge limits
[ 3.346458] ata1.00: configured for UDMA/100
[ 3.346606] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JD-00G 02.0 PQ: 0 ANSI: 5
[ 3.812034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.820114] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
[ 3.836126] ata2.00: configured for UDMA/100
[ 3.837614] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
[ 4.161566] Driver 'sd' needs updating - please use bus_type methods
[ 4.161754] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.161834] sd 0:0:0:0: [sda] Write Protect is off
[ 4.161885] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.161901] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.162048] sda:<6>ide-gd driver 1.18
[ 4.164188] hda: max request size: 512KiB
[ 4.165532] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 4.167641] hda: cache flushes supported
[ 4.167751] hda: hda1 hda2 hda3
[ 4.181467] sda1 sda2 sda3
[ 4.204497] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.206826] Driver 'sr' needs updating - please use bus_type methods
[ 4.210283] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.210359] Uniform CD-ROM driver Revision: 3.20
[ 4.210525] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.217872] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.217958] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.660897] md: raid1 personality registered for level 1
[ 4.662679] xor: automatically using best checksumming function: generic_sse
[ 4.681007] generic_sse: 7436.000 MB/sec
[ 4.681057] xor: using function: generic_sse (7436.000 MB/sec)
[ 4.681627] async_tx: api initialized (async)
[ 4.749012] raid6: int64x1 2259 MB/s
[ 4.817016] raid6: int64x2 2899 MB/s
[ 4.885025] raid6: int64x4 2244 MB/s
[ 4.953007] raid6: int64x8 1996 MB/s
[ 5.021040] raid6: sse2x1 1191 MB/s
[ 5.089013] raid6: sse2x2 1930 MB/s
[ 5.157018] raid6: sse2x4 2841 MB/s
[ 5.157066] raid6: using algorithm sse2x4 (2841 MB/s)
[ 5.159972] md: raid6 personality registered for level 6
[ 5.160045] md: raid5 personality registered for level 5
[ 5.160096] md: raid4 personality registered for level 4
[ 5.290515] md: md0 stopped.
[ 5.347939] md: bind<hda1>
[ 5.348175] md: bind<sda1>
[ 5.349423] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.354399] md0: unknown partition table
[ 5.514944] md: md1 stopped.
[ 5.516495] md: bind<hda2>
[ 5.516705] md: bind<sda2>
[ 5.516769] md: md1: raid array is not clean -- starting background reconstruction
[ 5.518014] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.519026] md1: unknown partition table
[ 5.557314] device-mapper: uevent: version 1.0.3
[ 5.557819] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.655748] PM: Starting manual resume from disk
[ 5.671079] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.671136] EXT3-fs: write access will be enabled during recovery.
[ 5.952650] md: resync of RAID array md1
[ 5.952700] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 5.952763] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 5.958124] md: using 128k window, over a total of 151364352 blocks.
[ 5.958189] md: resuming resync of md1 from checkpoint.
[ 6.512355] kjournald starting. Commit interval 5 seconds
[ 6.512425] EXT3-fs: recovery complete.
[ 6.541305] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.752614] udev: starting version 141
[ 8.668004] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.668082] ACPI: Power Button [PWRF]
[ 8.668210] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.668287] ACPI: Power Button [PWRB]
[ 8.793711] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.793811] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.978724] processor ACPI_CPU:00: registered as cooling_device0
[ 8.978987] processor ACPI_CPU:01: registered as cooling_device1
[ 9.046937] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.047813] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 9.415581] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.466091] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.547048] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 9.547120] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 9.950148] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.950591] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 9.950651] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 9.950908] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 10.699919] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 10.700100] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 12.701986] Adding 3943948k swap on /dev/sda3. Priority:-1 extents:1 across:3943948k
[ 12.707413] Adding 3943948k swap on /dev/hda3. Priority:-2 extents:1 across:3943948k
[ 12.831215] EXT3 FS on dm-0, internal journal
[ 12.915406] loop: module loaded
[ 13.787882] kjournald starting. Commit interval 5 seconds
[ 13.788331] EXT3 FS on md0, internal journal
[ 13.788410] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.873331] EXT4-fs: barriers enabled
[ 13.899862] kjournald2 starting: pid 2321, dev dm-3:8, commit interval 5 seconds
[ 13.900308] EXT4 FS on dm-3, internal journal on dm-3:8
[ 13.900362] EXT4-fs: delayed allocation enabled
[ 13.900411] EXT4-fs: file extents enabled
[ 13.901735] EXT4-fs: mballoc enabled
[ 13.901795] EXT4-fs: recovery complete.
[ 13.901995] EXT4-fs: mounted filesystem dm-3 with ordered data mode
[ 14.765839] Bridge firewalling registered
[ 14.782151] device eth1 entered promiscuous mode
[ 14.924375] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 14.980092] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 14.981795] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.319494] Loading iSCSI transport class v2.0-870.
[ 18.350285] iscsi: registered transport (tcp)
[ 18.427573] iscsi: registered transport (iser)
[ 18.884528] RPC: Registered udp transport module.
[ 18.884596] RPC: Registered tcp transport module.
[ 18.916786] Slow work thread pool: Starting up
[ 18.916903] Slow work thread pool: Ready
[ 18.917023] FS-Cache: Loaded
[ 18.957100] FS-Cache: Netfs 'nfs' registered for caching
[ 18.986045] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 25.817014] br0: no IPv6 routers present
[ 27.964012] torbr: no IPv6 routers present
[ 81.636269] virbr1: starting userspace STP failed, starting kernel STP
[ 81.781718] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 81.813041] svc: failed to register lockdv1 RPC service (errno 97).
[ 81.813622] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 81.823563] NFSD: starting 90-second grace period
[ 83.348105] tun: Universal TUN/TAP device driver, 1.6
[ 83.348159] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 83.350945] device vnet0 entered promiscuous mode
[ 83.352442] br0: port 2(vnet0) entering learning state
[ 83.499660] br0: port 2(vnet0) entering disabled state
[ 83.514343] device vnet0 left promiscuous mode
[ 83.514399] br0: port 2(vnet0) entering disabled state
[ 83.662348] lo: Disabled Privacy Extensions
[ 91.713009] virbr1: no IPv6 routers present
[ 138.738429] sata_mv 0000:04:04.0: version 1.28
[ 138.738934] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[ 138.738989] alloc irq_desc for 17 on cpu 0 node 0
[ 138.738991] alloc kstat_irqs on cpu 0 node 0
[ 138.739002] sata_mv 0000:04:04.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17
[ 138.739298] sata_mv 0000:04:04.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[ 138.740415] scsi4 : sata_mv
[ 138.741994] scsi5 : sata_mv
[ 138.747654] scsi6 : sata_mv
[ 138.748757] scsi7 : sata_mv
[ 138.750564] scsi8 : sata_mv
[ 138.751574] scsi9 : sata_mv
[ 138.753611] scsi10 : sata_mv
[ 138.753906] scsi11 : sata_mv
[ 138.753998] ata5: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe22000 irq 17
[ 138.754070] ata6: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe24000 irq 17
[ 138.754141] ata7: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe26000 irq 17
[ 138.754212] ata8: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe28000 irq 17
[ 138.754283] ata9: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe32000 irq 17
[ 138.754354] ata10: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe34000 irq 17
[ 138.754425] ata11: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe36000 irq 17
[ 138.754496] ata12: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe38000 irq 17
[ 139.228034] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 139.260048] ata5.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[ 139.260103] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 139.284063] ata5.00: configured for UDMA/133
[ 139.284193] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 139.284402] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 139.284532] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 139.284613] sd 4:0:0:0: [sdb] Write Protect is off
[ 139.284664] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 139.284684] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 139.284848] sdb:<6>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 139.784049] ata6.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 139.784105] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 139.816069] ata6.00: configured for UDMA/133
[ 139.816222] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 139.816455] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 139.816512] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 139.816595] sd 5:0:0:0: [sdc] Write Protect is off
[ 139.816646] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 139.816664] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 139.816834] sdc:<6>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 140.332048] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 140.332103] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 140.364063] ata7.00: configured for UDMA/133
[ 140.364204] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 140.364444] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 140.364457] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 140.364470] sd 6:0:0:0: [sdd] Write Protect is off
[ 140.364472] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 140.364491] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 140.364595] sdd:<6>ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 140.881103] ata8.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 140.881159] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 140.912063] ata8.00: configured for UDMA/133
[ 140.912203] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 140.912409] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 140.912539] sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 140.912622] sd 7:0:0:0: [sde] Write Protect is off
[ 140.912675] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 140.912695] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 140.912858] sde:<6>ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 141.404055] ata9.00: ATA-7: WDC WD5000AAKS-65TMA0, 12.01C01, max UDMA/133
[ 141.404110] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 141.428069] ata9.00: configured for UDMA/133
[ 141.428187] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
[ 141.428392] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 141.428518] sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 141.428600] sd 8:0:0:0: [sdf] Write Protect is off
[ 141.428651] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 141.428671] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 141.428831] sdf:<6>ata10: SATA link down (SStatus 0 SControl 300)
[ 142.068033] ata11: SATA link down (SStatus 0 SControl 300)
[ 142.388032] ata12: SATA link down (SStatus 0 SControl 300)
[ 169.820109] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 169.820174] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 169.820175] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 169.820314] ata5.00: status: { DRDY }
[ 169.820365] ata5: hard resetting link
[ 170.296032] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 170.336062] ata5.00: configured for UDMA/133
[ 170.336119] ata5: EH complete
[ 170.819022] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 170.819089] ata7.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 170.819090] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 170.819238] ata7.00: status: { DRDY }
[ 170.833995] ata7: hard resetting link
[ 170.834002] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 170.834009] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 170.834010] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 170.834012] ata6.00: status: { DRDY }
[ 170.834016] ata6: hard resetting link
[ 171.308043] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 171.308047] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 171.364086] ata7.00: configured for UDMA/133
[ 171.364089] ata6.00: configured for UDMA/133
[ 171.364098] ata6: EH complete
[ 171.364247] ata7: EH complete
[ 171.819001] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 171.819063] ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 171.819064] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 171.819200] ata8.00: status: { DRDY }
[ 171.819250] ata8: hard resetting link
[ 171.834715] ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 171.834778] ata9.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 171.834779] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 171.834919] ata9.00: status: { DRDY }
[ 171.834968] ata9: hard resetting link
[ 172.039129] sdb1
[ 172.039280] sdd1
[ 172.039507] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 172.039532] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 172.039619] sdc1
[ 172.039778] sdd: detected capacity change from 0 to 500107862016
[ 172.039782] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 172.300031] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 172.309352] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 172.348220] ata9.00: configured for UDMA/133
[ 172.348282] ata9: EH complete
[ 172.380062] ata8.00: configured for UDMA/133
[ 172.380117] ata8: EH complete
[ 202.834987] ata7.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 202.835052] ata6.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 202.835060] ata7.00: cmd 60/02:00:3f:00:00/00:00:00:00:00/40 tag 0 ncq 1024 in
[ 202.835062] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 202.835066] ata7.00: status: { DRDY }
[ 202.835072] ata7.00: cmd 60/1e:08:41:00:00/00:00:00:00:00/40 tag 1 ncq 15360 in
[ 202.835073] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 202.835075] ata7.00: status: { DRDY }
[ 202.835080] ata7: hard resetting link
[ 202.835544] ata6.00: cmd 60/02:00:3f:00:00/00:00:00:00:00/40 tag 0 ncq 1024 in
[ 202.835545] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 202.835692] ata6.00: status: { DRDY }
[ 202.835747] ata6.00: cmd 60/1e:08:41:00:00/00:00:00:00:00/40 tag 1 ncq 15360 in
[ 202.835749] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 202.841204] ata6.00: status: { DRDY }
[ 202.850515] ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 202.850575] ata5.00: cmd 60/02:00:3f:00:00/00:00:00:00:00/40 tag 0 ncq 1024 in
[ 202.850576] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 202.850580] ata6: hard resetting link
[ 202.850766] ata5.00: status: { DRDY }
[ 202.850818] ata5.00: cmd 60/1e:08:41:00:00/00:00:00:00:00/40 tag 1 ncq 15360 in
[ 202.850819] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 202.850955] ata5.00: status: { DRDY }
[ 202.851004] ata5: hard resetting link
[ 202.866165] ata9.00: NCQ disabled due to excessive errors
[ 202.866218] ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 202.866277] ata9.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 202.866278] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 202.866414] ata9.00: status: { DRDY }
[ 202.866463] ata9: hard resetting link
[ 202.881980] ata8.00: NCQ disabled due to excessive errors
[ 202.882032] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 202.882091] ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 202.882092] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 202.882231] ata8.00: status: { DRDY }
[ 202.882280] ata8: hard resetting link
[ 203.320031] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 203.332027] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 203.348036] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 203.348224] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 203.357464] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 203.368282] ata5.00: configured for UDMA/133
[ 203.368342] ata5: EH complete
[ 203.384064] ata7.00: configured for UDMA/133
[ 203.384119] ata7: EH complete
[ 203.388210] ata9.00: configured for UDMA/133
[ 203.388271] ata9: EH complete
[ 203.412381] ata6.00: configured for UDMA/133
[ 203.412436] ata6: EH complete
[ 203.429059] ata8.00: configured for UDMA/133
[ 203.429113] ata8: EH complete
[ 233.835050] ata9: limiting SATA link speed to 1.5 Gbps
[ 233.835108] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 233.835123] ata8: limiting SATA link speed to 1.5 Gbps
[ 233.835127] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 233.835134] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 233.835135] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 233.835138] ata8.00: status: { DRDY }
[ 233.835142] ata8: hard resetting link
[ 233.835505] ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 233.835506] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 233.835645] ata9.00: status: { DRDY }
[ 233.850623] ata6.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 233.850686] ata6.00: cmd 60/1e:00:41:00:00/00:00:00:00:00/40 tag 0 ncq 15360 in
[ 233.850687] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 233.850691] ata9: hard resetting link
[ 233.850874] ata6.00: status: { DRDY }
[ 233.850926] ata6.00: cmd 60/02:08:3f:00:00/00:00:00:00:00/40 tag 1 ncq 1024 in
[ 233.850927] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 233.851064] ata6.00: status: { DRDY }
[ 233.851113] ata6: hard resetting link
[ 233.866571] ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 233.866643] ata5.00: cmd 60/1e:00:41:00:00/00:00:00:00:00/40 tag 0 ncq 15360 in
[ 233.866644] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 233.866815] ata5.00: status: { DRDY }
[ 233.866878] ata5.00: cmd 60/02:08:3f:00:00/00:00:00:00:00/40 tag 1 ncq 1024 in
[ 233.866880] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 233.867027] ata5.00: status: { DRDY }
[ 233.867076] ata5: hard resetting link
[ 233.882534] ata7.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 233.882595] ata7.00: cmd 60/1e:00:41:00:00/00:00:00:00:00/40 tag 0 ncq 15360 in
[ 233.882596] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 233.882737] ata7.00: status: { DRDY }
[ 233.882789] ata7.00: cmd 60/02:08:3f:00:00/00:00:00:00:00/40 tag 1 ncq 1024 in
[ 233.882791] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 233.882930] ata7.00: status: { DRDY }
[ 233.882979] ata7: hard resetting link
[ 234.324031] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 234.348035] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 234.348235] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 234.348355] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 234.356679] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 234.365066] ata9.00: configured for UDMA/133
[ 234.365126] ata9: EH complete
[ 234.396438] ata5.00: configured for UDMA/133
[ 234.396495] ata5: EH complete
[ 234.412230] ata6.00: configured for UDMA/133
[ 234.412285] ata6: EH complete
[ 234.420093] ata7.00: configured for UDMA/133
[ 234.420148] ata7: EH complete
[ 234.420225] ata8.00: configured for UDMA/133
[ 234.420278] ata8: EH complete
[ 264.833977] ata9.00: limiting speed to UDMA/100:PIO4
[ 264.833982] ata5.00: NCQ disabled due to excessive errors
[ 264.833988] ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 264.833995] ata5.00: cmd 60/02:00:3f:00:00/00:00:00:00:00/40 tag 0 ncq 1024 in
[ 264.833996] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 264.833998] ata5.00: status: { DRDY }
[ 264.834003] ata5.00: cmd 60/1e:08:41:00:00/00:00:00:00:00/40 tag 1 ncq 15360 in
[ 264.834005] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 264.834007] ata5.00: status: { DRDY }
[ 264.834011] ata5: hard resetting link
[ 264.834561] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 264.834626] ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 264.834627] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 264.834773] ata9.00: status: { DRDY }
[ 264.849444] ata9: hard resetting link
[ 264.849447] ata6.00: NCQ disabled due to excessive errors
[ 264.849450] ata6.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 264.849456] ata6.00: cmd 60/02:00:3f:00:00/00:00:00:00:00/40 tag 0 ncq 1024 in
[ 264.849457] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 264.849459] ata6.00: status: { DRDY }
[ 264.849464] ata6.00: cmd 60/1e:08:41:00:00/00:00:00:00:00/40 tag 1 ncq 15360 in
[ 264.849465] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 264.849467] ata6.00: status: { DRDY }
[ 264.849470] ata6: hard resetting link
[ 264.864888] ata7.00: NCQ disabled due to excessive errors
[ 264.864958] ata7.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 264.865032] ata7.00: cmd 60/02:00:3f:00:00/00:00:00:00:00/40 tag 0 ncq 1024 in
[ 264.865034] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 264.865203] ata7.00: status: { DRDY }
[ 264.865264] ata7.00: cmd 60/1e:08:41:00:00/00:00:00:00:00/40 tag 1 ncq 15360 in
[ 264.865266] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 264.865437] ata7.00: status: { DRDY }
[ 264.865498] ata7: hard resetting link
[ 264.880956] ata8.00: limiting speed to UDMA/100:PIO4
[ 264.881026] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 264.881098] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 264.881099] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 264.881268] ata8.00: status: { DRDY }
[ 264.881327] ata8: hard resetting link
[ 265.324033] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 265.348038] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 265.348258] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 265.348381] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 265.356842] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 265.365078] ata9.00: configured for UDMA/100
[ 265.365135] ata9: EH complete
[ 265.396417] ata5.00: configured for UDMA/133
[ 265.396475] ata5: EH complete
[ 265.412430] ata6.00: configured for UDMA/133
[ 265.412484] ata6: EH complete
[ 265.428381] ata7.00: configured for UDMA/133
[ 265.428439] ata7: EH complete
[ 265.444062] ata8.00: configured for UDMA/100
[ 265.444114] ata8: EH complete
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread