Tim Blechmann wrote:
>>>>> running 2.6.31-rc5 (7cb7beb31aa3d941833b6a6e553687422c31e4b6 to be
>>>>> exact), sometimes some hard disks don't show up.
>>>>>
>>>>> after booting, my root hd (sda) is mounted to /, while two other hds
>>>>> (sdb/sdc) are mounted as a user. sda is always present, but the other
>>>>> two sometimes don't show up (i.e. they are not listed in /dev/disk/, nor
>>>>> to they have a /dev/sdX link). with 2.6.29 and 2.6.30, all three disks
>>>>> are reported correctly.
>>>> Can you please attach boot logs of a successful and a failed boot?
>>> i have two files attached:
>>> - dmesg_good - all hds are available
>>> - dmesg_bad - on hd is missing
>> Can you please apply the attached patch and post the bad boot log?
> 
> attached you find boot logs for both a good ad a bad boot

Sorry about the long delay.  I somehow marked the message read without
actually reading it.

I suspected the problem was with getting the wrong classification code
or phantom device detection kicking in spuriously.  Looks like the
problem happens way before that.  Can you please apply the attached
patch and report the result?

Thanks.

-- 
tejun