linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* 2.6.31-rc5 regression: hd don't show up
@ 2009-08-14  8:26 Tim Blechmann
  2009-08-14  9:17 ` Tejun Heo
  0 siblings, 1 reply; 32+ messages in thread
From: Tim Blechmann @ 2009-08-14  8:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-ide


[-- Attachment #1.1: Type: text/plain, Size: 1843 bytes --]

hi all,

running 2.6.31-rc5 (7cb7beb31aa3d941833b6a6e553687422c31e4b6 to be
exact), sometimes some hard disks don't show up.

after booting, my root hd (sda) is mounted to /, while two other hds
(sdb/sdc) are mounted as a user. sda is always present, but the other
two sometimes don't show up (i.e. they are not listed in /dev/disk/, nor
to they have a /dev/sdX link). with 2.6.29 and 2.6.30, all three disks
are reported correctly.

the lspci output of my controller:
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. Device 82d4
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
	I/O ports at a000 [size=8]
	I/O ports at 9c00 [size=4]
	I/O ports at 9880 [size=8]
	I/O ports at 9800 [size=4]
	I/O ports at 9480 [size=16]
	I/O ports at 9400 [size=16]
	Capabilities: [70] Power Management version 3
	Capabilities: [b0] PCIe advanced features <?>
	Kernel driver in use: ata_piix

00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. Device 82d4
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
	I/O ports at b000 [size=8]
	I/O ports at ac00 [size=4]
	I/O ports at a880 [size=8]
	I/O ports at a800 [size=4]
	I/O ports at a480 [size=16]
	I/O ports at a400 [size=16]
	Capabilities: [70] Power Management version 3
	Capabilities: [b0] PCIe advanced features <?>
	Kernel driver in use: ata_piix


dmesg output is attached. if i should provide some other information
about my system, please let me know

best, tim

-- 
tim@klingt.org
http://tim.klingt.org

The price an artist pays for doing what he wants is that he has to do
it.
  William S. Burroughs


[-- Attachment #1.2: dmesg --]
[-- Type: text/plain, Size: 56256 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-rc5 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1~jaunty1) ) #8 SMP PREEMPT Thu Aug 13 08:18:16 CEST 2009
[    0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
[    0.000000]  BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[    0.000000] DMI 2.5 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E3FFF write-protect
[    0.000000]   E4000-EBFFF write-through
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask F00000000 write-back
[    0.000000]   2 base 300000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 0BF700000 mask FFFF00000 uncachable
[    0.000000]   5 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x400000000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e4c00 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000bf680000 (usable)
[    0.000000]  modified: 00000000bf680000 - 00000000bf698000 (ACPI data)
[    0.000000]  modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[    0.000000]  modified: 00000000bf6dc000 - 00000000c0000000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000340000000 (usable)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf680000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf680000 page 4k
[    0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000
[    0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[    0.000000]  0100000000 - 0340000000 page 2M
[    0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000
[    0.000000] RAMDISK: 3783b000 - 37fef051
[    0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01  A1146 A1146001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 00000000bf698000 00040
[    0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG  20090226 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET  20090226 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR  20090226 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 000216ee80]    TEXT DATA BSS ==> [0001000000 - 000216ee80]
[    0.000000]   #3 [003783b000 - 0037fef051]          RAMDISK ==> [003783b000 - 0037fef051]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [000216f000 - 000216f288]              BRK ==> [000216f000 - 000216f288]
[    0.000000]   #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
[    0.000000]   #7 [0000013000 - 000001c000]          PGTABLE ==> [0000013000 - 000001c000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800377fffff] on node 0
[    0.000000]  [ffffea0010800000-ffffea0011dfffff] PMD -> [ffff880038000000-ffff8800395fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00340000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bf680
[    0.000000]     0: 0x00100000 -> 0x00340000
[    0.000000] On node 0 totalpages: 3143183
[    0.000000]   DMA zone: 88 pages used for memmap
[    0.000000]   DMA zone: 111 pages reserved
[    0.000000]   DMA zone: 3784 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 22440 pages used for memmap
[    0.000000]   DMA32 zone: 757464 pages, LIFO batch:31
[    0.000000]   Normal zone: 50688 pages used for memmap
[    0.000000]   Normal zone: 2308608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] 16 Processors exceeds NR_CPUS limit of 8
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 48
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[    0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000
[    0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000
[    0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages at ffff880028084000, static data 87684 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3069856
[    0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[    0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[    0.000000] Memory: 12183672k/13631488k available (5207k kernel code, 1058756k absent, 388184k reserved, 2985k data, 516k init)
[    0.000000] Preemptible RCU implementation.
[    0.000000] NR_IRQS:512
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2673.218 MHz processor.
[    0.001522] Console: colour VGA+ 80x25
[    0.001534] console [tty0] enabled
[    0.001558] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001559] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001561] ... MAX_LOCK_DEPTH:          48
[    0.001562] ... MAX_LOCKDEP_KEYS:        8191
[    0.001563] ... CLASSHASH_SIZE:          4096
[    0.001564] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.001565] ... MAX_LOCKDEP_CHAINS:      32768
[    0.001566] ... CHAINHASH_SIZE:          16384
[    0.001568]  memory used by lock dependency info: 5695 kB
[    0.001569]  per task-struct memory footprint: 1920 bytes
[    0.019778] allocated 125829120 bytes of page_cgroup
[    0.019781] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.019989] hpet clockevent registered
[    0.019992] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5346.43 BogoMIPS (lpj=2673218)
[    0.020123] Security Framework initialized
[    0.020127] SELinux:  Disabled at boot.
[    0.020176] Mount-cache hash table entries: 256
[    0.021098] Initializing cgroup subsys ns
[    0.021101] Initializing cgroup subsys cpuacct
[    0.021106] Initializing cgroup subsys memory
[    0.021140] Initializing cgroup subsys freezer
[    0.021157] CPU: Physical Processor ID: 0
[    0.021159] CPU: Processor Core ID: 0
[    0.021162] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.021163] CPU: L2 cache: 256K
[    0.021164] CPU: L3 cache: 8192K
[    0.021167] using mwait in idle threads.
[    0.021168] Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
[    0.021177] ... version:                 3
[    0.021178] ... bit width:               48
[    0.021180] ... generic counters:        4
[    0.021181] ... value mask:              0000ffffffffffff
[    0.021182] ... max period:              000000007fffffff
[    0.021183] ... fixed-purpose counters:  3
[    0.021184] ... counter mask:            000000070000000f
[    0.022009] ACPI: Core revision 20090521
[    0.060436] Setting APIC routing to flat
[    0.060919] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070920] CPU0: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.175014] lockdep: fixing up alternatives.
[    0.175121] Booting processor 1 APIC 0x2 ip 0x6000
[    0.185385] Initializing CPU#1
[    0.246917] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
[    0.246927] CPU: Physical Processor ID: 0
[    0.246929] CPU: Processor Core ID: 1
[    0.246931] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.246934] CPU: L2 cache: 256K
[    0.246935] CPU: L3 cache: 8192K
[    0.247350] CPU1: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.247358] Skipping synchronization checks as TSC is reliable.
[    0.247938] lockdep: fixing up alternatives.
[    0.247963] Booting processor 2 APIC 0x4 ip 0x6000
[    0.258224] Initializing CPU#2
[    0.318885] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
[    0.318892] CPU: Physical Processor ID: 0
[    0.318893] CPU: Processor Core ID: 2
[    0.318896] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.318898] CPU: L2 cache: 256K
[    0.318900] CPU: L3 cache: 8192K
[    0.319306] CPU2: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.319313] Skipping synchronization checks as TSC is reliable.
[    0.319905] lockdep: fixing up alternatives.
[    0.319934] Booting processor 3 APIC 0x6 ip 0x6000
[    0.330195] Initializing CPU#3
[    0.390853] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339)
[    0.390861] CPU: Physical Processor ID: 0
[    0.390862] CPU: Processor Core ID: 3
[    0.390865] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.390868] CPU: L2 cache: 256K
[    0.390869] CPU: L3 cache: 8192K
[    0.391275] CPU3: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.391283] Skipping synchronization checks as TSC is reliable.
[    0.391873] lockdep: fixing up alternatives.
[    0.391900] Booting processor 4 APIC 0x1 ip 0x6000
[    0.402161] Initializing CPU#4
[    0.462822] Calibrating delay using timer specific routine.. 5344.66 BogoMIPS (lpj=2672334)
[    0.462831] CPU: Physical Processor ID: 0
[    0.462832] CPU: Processor Core ID: 0
[    0.462835] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.462837] CPU: L2 cache: 256K
[    0.462838] CPU: L3 cache: 8192K
[    0.463352] CPU4: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.463359] Skipping synchronization checks as TSC is reliable.
[    0.463843] lockdep: fixing up alternatives.
[    0.463871] Booting processor 5 APIC 0x3 ip 0x6000
[    0.477993] Initializing CPU#5
[    0.537790] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
[    0.537797] CPU: Physical Processor ID: 0
[    0.537799] CPU: Processor Core ID: 1
[    0.537802] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.537804] CPU: L2 cache: 256K
[    0.537806] CPU: L3 cache: 8192K
[    0.538327] CPU5: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.538334] Skipping synchronization checks as TSC is reliable.
[    0.538810] lockdep: fixing up alternatives.
[    0.538839] Booting processor 6 APIC 0x5 ip 0x6000
[    0.549099] Initializing CPU#6
[    0.609759] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
[    0.609766] CPU: Physical Processor ID: 0
[    0.609767] CPU: Processor Core ID: 2
[    0.609770] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.609773] CPU: L2 cache: 256K
[    0.609774] CPU: L3 cache: 8192K
[    0.610310] CPU6: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.610318] Skipping synchronization checks as TSC is reliable.
[    0.610779] lockdep: fixing up alternatives.
[    0.610806] Booting processor 7 APIC 0x7 ip 0x6000
[    0.621067] Initializing CPU#7
[    0.681727] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339)
[    0.681734] CPU: Physical Processor ID: 0
[    0.681736] CPU: Processor Core ID: 3
[    0.681739] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.681741] CPU: L2 cache: 256K
[    0.681743] CPU: L3 cache: 8192K
[    0.682248] CPU7: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.682255] Skipping synchronization checks as TSC is reliable.
[    0.682276] Brought up 8 CPUs
[    0.682278] Total of 8 processors activated (42759.15 BogoMIPS).
[    0.682387] CPU0 attaching sched-domain:
[    0.682390]  domain 0: span 0,4 level SIBLING
[    0.682392]   groups: 0 4
[    0.682395]   domain 1: span 0-7 level MC
[    0.682397]    groups: 0,4 1,5 2,6 3,7
[    0.682414] CPU1 attaching sched-domain:
[    0.682416]  domain 0: span 1,5 level SIBLING
[    0.682418]   groups: 1 5
[    0.682421]   domain 1: span 0-7 level MC
[    0.682423]    groups: 1,5 2,6 3,7 0,4
[    0.682428] CPU2 attaching sched-domain:
[    0.682430]  domain 0: span 2,6 level SIBLING
[    0.682432]   groups: 2 6
[    0.682434]   domain 1: span 0-7 level MC
[    0.682436]    groups: 2,6 3,7 0,4 1,5
[    0.682442] CPU3 attaching sched-domain:
[    0.682443]  domain 0: span 3,7 level SIBLING
[    0.682445]   groups: 3 7
[    0.682448]   domain 1: span 0-7 level MC
[    0.682450]    groups: 3,7 0,4 1,5 2,6
[    0.682455] CPU4 attaching sched-domain:
[    0.682457]  domain 0: span 0,4 level SIBLING
[    0.682459]   groups: 4 0
[    0.682462]   domain 1: span 0-7 level MC
[    0.682463]    groups: 0,4 1,5 2,6 3,7
[    0.682469] CPU5 attaching sched-domain:
[    0.682470]  domain 0: span 1,5 level SIBLING
[    0.682472]   groups: 5 1
[    0.682475]   domain 1: span 0-7 level MC
[    0.682477]    groups: 1,5 2,6 3,7 0,4
[    0.682482] CPU6 attaching sched-domain:
[    0.682484]  domain 0: span 2,6 level SIBLING
[    0.682486]   groups: 6 2
[    0.682489]   domain 1: span 0-7 level MC
[    0.682490]    groups: 2,6 3,7 0,4 1,5
[    0.682496] CPU7 attaching sched-domain:
[    0.682497]  domain 0: span 3,7 level SIBLING
[    0.682499]   groups: 7 3
[    0.682502]   domain 1: span 0-7 level MC
[    0.682504]    groups: 3,7 0,4 1,5 2,6
[    0.683239] Booting paravirtualized kernel on bare hardware
[    0.683497] regulator: core version 0.5
[    0.683523] Time:  8:02:50  Date: 08/14/09
[    0.683709] NET: Registered protocol family 16
[    0.684150] ACPI: bus type pci registered
[    0.684259] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.684261] PCI: Not using MMCONFIG.
[    0.684263] PCI: Using configuration type 1 for base access
[    0.685847] bio: create slab <bio-0> at 0
[    0.688507] ACPI: EC: Look up EC in DSDT
[    0.729614] ACPI: Interpreter enabled
[    0.729619] ACPI: (supports S0 S1 S3 S4 S5)
[    0.729667] ACPI: Using IOAPIC for interrupt routing
[    0.729733] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.732481] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.733988] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.746078] ACPI Warning: Incorrect checksum in table [OEMB] - 8B, should be 83 20090521 tbutils-246
[    0.746335] ACPI: No dock devices found.
[    0.746492] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.746717] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.746721] pci 0000:00:00.0: PME# disabled
[    0.746791] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.746795] pci 0000:00:01.0: PME# disabled
[    0.746866] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.746870] pci 0000:00:03.0: PME# disabled
[    0.746943] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.746947] pci 0000:00:07.0: PME# disabled
[    0.747360] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[    0.747440] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[    0.747520] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
[    0.747605] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff]
[    0.747666] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.747670] pci 0000:00:1a.7: PME# disabled
[    0.747720] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[    0.747768] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.747772] pci 0000:00:1b.0: PME# disabled
[    0.747838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.747842] pci 0000:00:1c.0: PME# disabled
[    0.747914] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.747918] pci 0000:00:1c.2: PME# disabled
[    0.747985] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
[    0.748065] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[    0.748144] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[    0.748232] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
[    0.748294] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.748298] pci 0000:00:1d.7: PME# disabled
[    0.748434] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.748438] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.748442] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.748446] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[    0.748506] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
[    0.748512] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
[    0.748518] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
[    0.748524] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[    0.748530] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[    0.748536] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[    0.748590] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
[    0.748605] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.748656] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[    0.748662] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[    0.748668] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[    0.748674] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[    0.748680] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[    0.748685] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[    0.748810] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[    0.748820] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[    0.748830] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[    0.748836] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[    0.748842] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb480000-0xfb4fffff]
[    0.748919] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[    0.748923] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff]
[    0.748929] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.749047] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff]
[    0.749099] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[    0.749120] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff]
[    0.749135] pci 0000:04:00.0: reg 20 64bit mmio: [0xf4ef0000-0xf4efffff]
[    0.749144] pci 0000:04:00.0: reg 30 32bit mmio: [0xfb5c0000-0xfb5dffff]
[    0.749188] pci 0000:04:00.0: supports D1 D2
[    0.749190] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.749195] pci 0000:04:00.0: PME# disabled
[    0.749272] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[    0.749276] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
[    0.749282] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff]
[    0.749324] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff]
[    0.749414] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.749435] pci 0000:06:01.0: supports D1 D2
[    0.749437] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.749441] pci 0000:06:01.0: PME# disabled
[    0.749504] pci 0000:00:1e.0: transparent bridge
[    0.749508] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    0.749512] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff]
[    0.749518] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff]
[    0.749566] pci_bus 0000:00: on NUMA node 0
[    0.749572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.750002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.750150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.750226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.750309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[    0.750374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[    0.750440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[    0.782646] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.782782] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.782910] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.783041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.783172] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.783322] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.783454] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.783585] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[    0.783909] SCSI subsystem initialized
[    0.784100] libata version 3.00 loaded.
[    0.784203] usbcore: registered new interface driver usbfs
[    0.784224] usbcore: registered new interface driver hub
[    0.784255] usbcore: registered new device driver usb
[    0.784435] ACPI: WMI: Mapper loaded
[    0.784437] PCI: Using ACPI for IRQ routing
[    0.794221] Bluetooth: Core ver 2.15
[    0.794256] NET: Registered protocol family 31
[    0.794258] Bluetooth: HCI device and connection manager initialized
[    0.794277] Bluetooth: HCI socket layer initialized
[    0.794279] NET: Registered protocol family 8
[    0.794281] NET: Registered protocol family 20
[    0.794298] NetLabel: Initializing
[    0.794299] NetLabel:  domain hash size = 128
[    0.794300] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.794343] NetLabel:  unlabeled traffic allowed by default
[    0.794605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.794610] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.802720] Switched to high resolution mode on CPU 0
[    0.803116] Switched to high resolution mode on CPU 3
[    0.803119] Switched to high resolution mode on CPU 2
[    0.803133] Switched to high resolution mode on CPU 1
[    0.803187] Switched to high resolution mode on CPU 6
[    0.803189] Switched to high resolution mode on CPU 5
[    0.803192] Switched to high resolution mode on CPU 7
[    0.803194] Switched to high resolution mode on CPU 4
[    0.816948] pnp: PnP ACPI init
[    0.816979] ACPI: bus type pnp registered
[    0.820599] pnp: PnP ACPI: found 15 devices
[    0.820602] ACPI: ACPI bus type pnp unregistered
[    0.820615] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[    0.820617] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[    0.820620] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[    0.820622] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[    0.820625] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
[    0.820627] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[    0.820636] system 00:07: ioport range 0x290-0x29f has been reserved
[    0.820643] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.820645] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.820648] system 00:08: ioport range 0x500-0x57f could not be reserved
[    0.820650] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.820653] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.820655] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[    0.820662] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[    0.820669] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.820672] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.820678] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.820690] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.820692] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[    0.820695] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.820697] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
[    0.820700] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[    0.825516] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.825518] pci 0000:00:01.0:   IO window: disabled
[    0.825522] pci 0000:00:01.0:   MEM window: disabled
[    0.825526] pci 0000:00:01.0:   PREFETCH window: disabled
[    0.825529] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[    0.825532] pci 0000:00:03.0:   IO window: 0xc000-0xcfff
[    0.825536] pci 0000:00:03.0:   MEM window: 0xf8000000-0xfb4fffff
[    0.825540] pci 0000:00:03.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.825546] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[    0.825547] pci 0000:00:07.0:   IO window: disabled
[    0.825551] pci 0000:00:07.0:   MEM window: disabled
[    0.825554] pci 0000:00:07.0:   PREFETCH window: disabled
[    0.825558] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[    0.825559] pci 0000:00:1c.0:   IO window: disabled
[    0.825563] pci 0000:00:1c.0:   MEM window: disabled
[    0.825567] pci 0000:00:1c.0:   PREFETCH window: 0x000000f4f00000-0x000000f4ffffff
[    0.825573] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.825576] pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
[    0.825581] pci 0000:00:1c.2:   MEM window: 0xfb500000-0xfb5fffff
[    0.825584] pci 0000:00:1c.2:   PREFETCH window: 0x000000f4e00000-0x000000f4efffff
[    0.825598] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
[    0.825599] pci 0000:06:01.0:   IO window: 0x00e000-0x00e0ff
[    0.825604] pci 0000:06:01.0:   IO window: 0x00e400-0x00e4ff
[    0.825608] pci 0000:06:01.0:   PREFETCH window: 0xc0000000-0xc3ffffff
[    0.825612] pci 0000:06:01.0:   MEM window: 0xc4000000-0xc7ffffff
[    0.825617] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.825619] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.825624] pci 0000:00:1e.0:   MEM window: 0xfb600000-0xfbefffff
[    0.825628] pci 0000:00:1e.0:   PREFETCH window: 0x000000f5000000-0x000000f6ffffff
[    0.825641] pci 0000:00:01.0: setting latency timer to 64
[    0.825649] pci 0000:00:03.0: setting latency timer to 64
[    0.825656] pci 0000:00:07.0: setting latency timer to 64
[    0.825667] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.825671] pci 0000:00:1c.0: setting latency timer to 64
[    0.825681] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.825687] pci 0000:00:1c.2: setting latency timer to 64
[    0.825693] pci 0000:00:1e.0: setting latency timer to 64
[    0.825701] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.825706] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.825708] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.825710] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.825712] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff]
[    0.825714] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.825716] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff]
[    0.825717] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    0.825719] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff]
[    0.825721] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff]
[    0.825723] pci_bus 0000:06: resource 0 io:  [0xe000-0xefff]
[    0.825724] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff]
[    0.825726] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff]
[    0.825728] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.825729] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.825731] pci_bus 0000:07: resource 0 io:  [0xe000-0xe0ff]
[    0.825733] pci_bus 0000:07: resource 1 io:  [0xe400-0xe4ff]
[    0.825734] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff]
[    0.825736] pci_bus 0000:07: resource 3 mem: [0xc4000000-0xc7ffffff]
[    0.825852] NET: Registered protocol family 2
[    0.826076] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.827138] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.827759] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[    0.831763] TCP: Hash tables configured (established 262144 bind 65536)
[    0.831785] TCP reno registered
[    0.832006] NET: Registered protocol family 1
[    0.832210] Trying to unpack rootfs image as initramfs...
[    0.972194] Freeing initrd memory: 7888k freed
[    0.974072] Scanning for low memory corruption every 60 seconds
[    0.974318] audit: initializing netlink socket (disabled)
[    0.974354] type=2000 audit(1250236969.817:1): initialized
[    0.978268] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.980903] VFS: Disk quotas dquot_6.5.2
[    0.980990] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.981958] fuse init (API version 7.12)
[    0.982025] msgmni has been set to 23813
[    0.982605] alg: No test for stdrng (krng)
[    0.982646] io scheduler noop registered
[    0.982648] io scheduler anticipatory registered
[    0.982650] io scheduler deadline registered
[    0.982690] io scheduler cfq registered (default)
[    0.982849] pci 0000:02:00.0: Boot video device
[    0.983067] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
[    0.983076] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.983217] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
[    0.983224] pcieport-driver 0000:00:03.0: setting latency timer to 64
[    0.983358] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
[    0.983365] pcieport-driver 0000:00:07.0: setting latency timer to 64
[    0.983497] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
[    0.983505] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.983649] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
[    0.983657] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.983765] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[    0.983784] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[    0.983793] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[    0.983806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.983956] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.984198] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.984202] ACPI: Power Button [PWRF]
[    0.984282] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.984284] ACPI: Power Button [PWRB]
[    0.985330] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[    0.986188] ACPI: SSDT 00000000bf69a140 003B2 (v01  PmRef  P001Cst 00003001 INTL 20060113)
[    0.989024] Monitor-Mwait will be used to enter C-1 state
[    0.989057] Monitor-Mwait will be used to enter C-2 state
[    0.989088] Monitor-Mwait will be used to enter C-3 state
[    0.989230] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.989364] processor LNXCPU:00: registered as cooling_device0
[    0.989917] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
[    0.990713] ACPI: SSDT 00000000bf69a500 00085 (v01  PmRef  P002Cst 00003000 INTL 20060113)
[    0.993663] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.993697] processor LNXCPU:01: registered as cooling_device1
[    0.994247] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm  P003Ist 00000012 INTL 20060113)
[    0.995052] ACPI: SSDT 00000000bf69a590 00085 (v01  PmRef  P003Cst 00003000 INTL 20060113)
[    0.997998] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[    0.998031] processor LNXCPU:02: registered as cooling_device2
[    0.998576] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm  P004Ist 00000012 INTL 20060113)
[    0.999384] ACPI: SSDT 00000000bf69a620 00085 (v01  PmRef  P004Cst 00003000 INTL 20060113)
[    1.002340] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[    1.002377] processor LNXCPU:03: registered as cooling_device3
[    1.002930] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm  P005Ist 00000012 INTL 20060113)
[    1.003734] ACPI: SSDT 00000000bf69a6b0 00085 (v01  PmRef  P005Cst 00003000 INTL 20060113)
[    1.006703] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[    1.006737] processor LNXCPU:04: registered as cooling_device4
[    1.007290] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm  P006Ist 00000012 INTL 20060113)
[    1.008111] ACPI: SSDT 00000000bf69a740 00085 (v01  PmRef  P006Cst 00003000 INTL 20060113)
[    1.011061] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[    1.011096] processor LNXCPU:05: registered as cooling_device5
[    1.011643] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm  P007Ist 00000012 INTL 20060113)
[    1.012458] ACPI: SSDT 00000000bf69a7d0 00085 (v01  PmRef  P007Cst 00003000 INTL 20060113)
[    1.015414] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[    1.015452] processor LNXCPU:06: registered as cooling_device6
[    1.016017] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm  P008Ist 00000012 INTL 20060113)
[    1.016831] ACPI: SSDT 00000000bf69a860 00085 (v01  PmRef  P008Cst 00003000 INTL 20060113)
[    1.019789] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[    1.019824] processor LNXCPU:07: registered as cooling_device7
[    1.022984] XENFS: not registering filesystem on non-xen platform
[    1.024695] Linux agpgart interface v0.103
[    1.024700] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.026724] brd: module loaded
[    1.027422] loop: module loaded
[    1.027513] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.027698] ata_piix 0000:00:1f.2: version 2.13
[    1.027716] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.027721] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.027773] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.027853] scsi0 : ata_piix
[    1.028159] scsi1 : ata_piix
[    1.029983] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
[    1.029988] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
[    1.030012] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.030017] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.030057] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.030113] scsi2 : ata_piix
[    1.030184] scsi3 : ata_piix
[    1.031953] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
[    1.031956] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
[    1.033058] Fixed MDIO Bus: probed
[    1.033062] PPP generic driver version 2.4.2
[    1.033285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.033309] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.033320] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.033323] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.034142] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.038056] ehci_hcd 0000:00:1a.7: debug port 1
[    1.038062] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    1.038077] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[    1.047684] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.048118] usb usb1: configuration #1 chosen from 1 choice
[    1.048312] hub 1-0:1.0: USB hub found
[    1.048338] hub 1-0:1.0: 6 ports detected
[    1.048642] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.048654] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.048658] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.048775] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.052668] ehci_hcd 0000:00:1d.7: debug port 1
[    1.052674] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.052689] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[    1.061659] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.061782] usb usb2: configuration #1 chosen from 1 choice
[    1.061818] hub 2-0:1.0: USB hub found
[    1.061824] hub 2-0:1.0: 6 ports detected
[    1.061958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.061982] uhci_hcd: USB Universal Host Controller Interface driver
[    1.062022] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.062028] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.062031] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.062087] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.062120] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    1.062238] usb usb3: configuration #1 chosen from 1 choice
[    1.062275] hub 3-0:1.0: USB hub found
[    1.062320] hub 3-0:1.0: 2 ports detected
[    1.062419] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.062424] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.062427] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.062479] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.062513] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    1.062616] usb usb4: configuration #1 chosen from 1 choice
[    1.062658] hub 4-0:1.0: USB hub found
[    1.062666] hub 4-0:1.0: 2 ports detected
[    1.062748] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.062754] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.062757] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.062808] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.062842] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[    1.062949] usb usb5: configuration #1 chosen from 1 choice
[    1.062984] hub 5-0:1.0: USB hub found
[    1.062991] hub 5-0:1.0: 2 ports detected
[    1.063069] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.063075] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.063078] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.063130] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.063154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    1.063254] usb usb6: configuration #1 chosen from 1 choice
[    1.063289] hub 6-0:1.0: USB hub found
[    1.063296] hub 6-0:1.0: 2 ports detected
[    1.063369] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.063375] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.063378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.063431] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.063454] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    1.063556] usb usb7: configuration #1 chosen from 1 choice
[    1.063591] hub 7-0:1.0: USB hub found
[    1.063624] hub 7-0:1.0: 2 ports detected
[    1.063704] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.063709] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.063712] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.063763] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.063791] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    1.063897] usb usb8: configuration #1 chosen from 1 choice
[    1.063935] hub 8-0:1.0: USB hub found
[    1.063942] hub 8-0:1.0: 2 ports detected
[    1.064085] PNP: No PS/2 controller found. Probing ports directly.
[    1.066871] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.066901] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.067288] mice: PS/2 mouse device common for all mice
[    1.067407] rtc_cmos 00:03: RTC can wake from S4
[    1.067609] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.067636] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.067777] device-mapper: uevent: version 1.0.3
[    1.067882] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.068087] device-mapper: multipath: version 1.1.0 loaded
[    1.068118] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.068983] cpuidle: using governor ladder
[    1.069691] cpuidle: using governor menu
[    1.070351] TCP cubic registered
[    1.070668] NET: Registered protocol family 10
[    1.071807] lo: Disabled Privacy Extensions
[    1.072451] NET: Registered protocol family 17
[    1.072518] Bluetooth: L2CAP ver 2.13
[    1.072519] Bluetooth: L2CAP socket layer initialized
[    1.072522] Bluetooth: SCO (Voice Link) ver 0.6
[    1.072523] Bluetooth: SCO socket layer initialized
[    1.072650] Bluetooth: RFCOMM TTY layer initialized
[    1.072653] Bluetooth: RFCOMM socket layer initialized
[    1.072654] Bluetooth: RFCOMM ver 1.11
[    1.080695] PM: Resume from disk failed.
[    1.080759] registered taskstats version 1
[    1.080956]   Magic number: 5:870:17
[    1.081109] rtc_cmos 00:03: setting system clock to 2009-08-14 08:02:50 UTC (1250236970)
[    1.081113] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.081116] EDD information not available.
[    1.346780] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.497757] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.520196] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[    1.520201] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.523147] ata4.00: configured for UDMA/133
[    1.555735] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    1.722136] usb 3-1: configuration #1 chosen from 1 choice
[    1.790717] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.790731] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.790941] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.790952] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.793962] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[    1.799956] ata1.00: configured for UDMA/100
[    1.801865] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223B  SB01 PQ: 0 ANSI: 5
[    1.806527] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.806602] Uniform CD-ROM driver Revision: 3.20
[    1.806888] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.807231] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.813199] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[    1.813203] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.832213] ata2.00: configured for UDMA/133
[    1.832353] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
[    1.832705] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.832723] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.832779] sd 1:0:0:0: [sda] Write Protect is off
[    1.832782] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.832786] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[    1.832825] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.832933] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.832986] sd 3:0:0:0: [sdb] Write Protect is off
[    1.832989] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.833017] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.833194]  sda:
[    1.833361]  sdb:
[    1.833501] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.846141]  sda1 sda2 < sda5 >
[    1.868990] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.882392]  sdb1
[    1.882753] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.882918] Freeing unused kernel memory: 516k freed
[    1.882991] Write protecting the kernel read-only data: 7328k
[    1.973655] usb 3-2: new low speed USB device using uhci_hcd and address 3
[    2.046360] Floppy drive(s): fd0 is 1.44M
[    2.060756] FDC 0 is a post-1991 82077
[    2.066902] usbcore: registered new interface driver hiddev
[    2.069526] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.069546] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.069581] r8169 0000:04:00.0: setting latency timer to 64
[    2.069640] r8169 0000:04:00.0: irq 53 for MSI/MSI-X
[    2.070838] eth0: RTL8168c/8111c at 0xffffc90000022000, 00:24:8c:a7:6e:2d, XID 3c4000c0 IRQ 53
[    2.086176] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[    2.086723] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input0
[    2.111033] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[    2.111191] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input1
[    2.111225] usbcore: registered new interface driver usbhid
[    2.111231] usbhid: v2.6:USB HID core driver
[    2.134958] usb 3-2: configuration #1 chosen from 1 choice
[    2.151070] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[    2.151205] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[    2.432557] PM: Starting manual resume from disk
[    2.432567] PM: Resume from partition 8:5
[    2.432568] PM: Checking hibernation image.
[    2.432831] PM: Resume from disk failed.
[    2.477208] EXT4-fs (sda1): barriers enabled
[    2.507276] kjournald2 starting: pid 979, dev sda1:8, commit interval 5 seconds
[    2.507328] EXT4-fs (sda1): delayed allocation enabled
[    2.507332] EXT4-fs: file extents enabled
[    2.551808] EXT4-fs: mballoc enabled
[    2.551871] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    5.867544] udev: starting version 141
[    6.554043] nvidia: module license 'NVIDIA' taints kernel.
[    6.554047] Disabling lock debugging due to kernel taint
[    6.699614] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    6.759175] iTCO_vendor_support: vendor-support=0
[    6.760226] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[    6.760305] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[    6.760346] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.785866] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410]
[    6.785886] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[    6.785889] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[    6.785894] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44
[    6.810661] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[    6.810667] nvidia 0000:02:00.0: setting latency timer to 64
[    6.810783] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.18.03  Fri Jul 31 21:54:40 PDT 2009
[    6.858869] cfg80211: Calling CRDA to update world regulatory domain
[    6.946861] cfg80211: World regulatory domain updated:
[    6.946863] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    6.946866] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.946868] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.946869] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.946871] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.946876] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.010706] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17
[    7.010709] yenta_cardbus 0000:06:01.0: Socket status: 30000020
[    7.010712] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[    7.010719] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[    7.010721] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff
[    7.010723] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff
[    7.088379] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.165453] phy0: Selected rate control algorithm 'minstrel'
[    7.166168] Registered led device: rt61pci-phy0::radio
[    7.166183] Registered led device: rt61pci-phy0::assoc
[    7.193272] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.193299] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.247705] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
[    7.637790] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[    7.637823] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[    7.637892] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c
[    7.673177] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002)
[    7.673186] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.533339] Hammerfall-DSP: Firmware already present, initializing card.
[   10.678770] lp: driver loaded but no devices found
[   10.841084] Adding 2000052k swap on /dev/sda5.  Priority:-1 extents:1 across:2000052k 
[   11.378433] EXT4-fs (sda1): internal journal on sda1:8
[   16.482240] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.482242] Bluetooth: BNEP filters: protocol multicast
[   16.502580] Bridge firewalling registered
[   17.668356] ppdev: user-space parallel port driver
[   21.578896] r8169: eth0: link down
[   21.579984] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.580431] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin
[   21.649038] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   96.845138] wlan0: authenticate with AP 00:24:fe:09:94:18
[   97.045053] wlan0: authenticate with AP 00:24:fe:09:94:18
[   97.245022] wlan0: authenticate with AP 00:24:fe:09:94:18
[   97.444981] wlan0: authentication with AP 00:24:fe:09:94:18 timed out
[  108.042401] wlan0: authenticate with AP 00:24:fe:09:94:18
[  108.044198] wlan0: authenticated
[  108.044202] wlan0: associate with AP 00:24:fe:09:94:18
[  108.047251] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=1)
[  108.047254] wlan0: associated
[  108.049778] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  111.596253] EXT4-fs (sdb1): barriers enabled
[  111.620638] kjournald2 starting: pid 4158, dev sdb1:8, commit interval 5 seconds
[  111.620877] EXT4-fs (sdb1): internal journal on sdb1:8
[  111.620882] EXT4-fs (sdb1): delayed allocation enabled
[  111.620886] EXT4-fs: file extents enabled
[  111.640564] EXT4-fs: mballoc enabled
[  111.640578] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[  118.904194] wlan0: no IPv6 routers present

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 32+ messages in thread
end of thread, other threads:[~2009-10-06  7:31 UTC | newest]

Thread overview: 32+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-14  8:26 2.6.31-rc5 regression: hd don't show up Tim Blechmann
2009-08-14  9:17 ` Tejun Heo
2009-08-14 12:34   ` Tim Blechmann
2009-08-16  2:54     ` Tejun Heo
2009-08-16 10:05       ` Tim Blechmann
2009-08-27  8:38         ` Tejun Heo
2009-08-27 10:21           ` Tim Blechmann
2009-08-27 11:35             ` Tejun Heo
2009-08-28 11:04               ` Tim Blechmann
2009-08-31  7:39                 ` Tejun Heo
2009-09-01 23:34                   ` Tim Blechmann
2009-09-02  2:22                     ` Tejun Heo
2009-09-02  9:12                       ` Tim Blechmann
2009-09-03 14:07                         ` Tejun Heo
2009-09-04 22:06                           ` Tim Blechmann
2009-09-04 22:33                             ` Maxim Levitsky
2009-09-05  0:12                             ` Tejun Heo
2009-09-08 20:58                               ` Tim Blechmann
2009-09-16  2:19                                 ` Tejun Heo
2009-09-16  5:39                                   ` Tejun Heo
2009-09-16  7:36                                     ` Tim Blechmann
2009-09-16 12:00                                       ` Tejun Heo
2009-09-25  4:20                                         ` Tejun Heo
2009-09-25  7:46                                           ` Tim Blechmann
2009-09-25  7:53                                             ` Tejun Heo
2009-09-25 11:47                                               ` Tim Blechmann
2009-09-25 13:21                                                 ` Tejun Heo
2009-10-02  5:20                                                   ` Tejun Heo
2009-10-02  7:30                                                     ` Tim Blechmann
2009-10-02  8:59                                                       ` Tejun Heo
2009-10-05  9:59                                                         ` Tim Blechmann
2009-10-06  7:30                                                           ` Tejun Heo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).