From mboxrd@z Thu Jan 1 00:00:00 1970 From: Harri Olin Subject: Re: sata_mv 0000:03:06.0: PCI ERROR; PCI IRQ cause=0x30000040 Date: Fri, 09 Oct 2009 00:51:14 +0300 Message-ID: <4ACE5ED2.2040106@gmail.com> References: <1254546642.1438.135.camel@giskard> <4ACA6904.1060509@rtr.ca> <4ACB3741.2030101@gmail.com> <1254852272.1471.172.camel@giskard> <1255019160.30440.666.camel@giskard> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from emh05.mail.saunalahti.fi ([62.142.5.111]:50233 "EHLO emh05.mail.saunalahti.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755908AbZJHVvv convert rfc822-to-8bit (ORCPT ); Thu, 8 Oct 2009 17:51:51 -0400 In-Reply-To: <1255019160.30440.666.camel@giskard> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Bernie Innocenti Cc: Mark Lord , linux-ide@vger.kernel.org, lkml , sysadmin Bernie Innocenti kirjoitti: > El Tue, 06-10-2009 a las 14:04 -0400, Bernie Innocenti escribi=F3: >>> I have heard same thing happened with same kind of configuration, u= sing=20 >>> Supermicro H8DME-2 motherboard, Opteron 2378 CPU. >>> >>> Even the controllers were on same slots. >> Close. Mine is a Supermicro H8DM8-2 with 2x Opteron 2374 HE CPU. >=20 > I was wrong (the BIOS DMI block is wrong). The motherboard is labele= d > as H8DME-2. >=20 H8DME-2 is the same board as H8DM8-2, just without scsi controller. There is 2 3-pin jumpers somewhere between pci-x slots, one for each=20 bus. With these you can force the bus to 66MHz PCI or 66MHz PCI-X.=20 Without jumper means autodetect. Note that this information is only fro= m=20 manual, haven't been able to confirm what it really does :) Oh and on the other identical case, I heard that moving other controlle= r=20 to different bus (1st controller in top slot and 2nd controller in 2nd=20 slot from bottom) resolved the issue, or at least it has not error'd ye= t. --=20 Harri.