* disk with ata_piix freezes
@ 2009-10-19 10:12 Jan Christoph Uhde
2009-10-20 0:39 ` Robert Hancock
0 siblings, 1 reply; 6+ messages in thread
From: Jan Christoph Uhde @ 2009-10-19 10:12 UTC (permalink / raw)
To: linux-ide
Hi,
my net-book suffers serious disk freezes. I am using the ata_piix driver fom
the latest ubuntu karmic kernel and have tried almost everything i could find
.. every kernel option from force_pcs to .. acpi=.+ , pci=.+
and i would really like to keep acpi .. :(
Since google will not help this time i will ask here for help:
ata port 1 device 0
action = 0x6 i am to stupid to read the acton from libata.h:(
exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
cmd ca/00:28:67:b5:7e/00:00:00:00:00/e0 tag 0 dma 20480 out
res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
status: { DRDY }
I am willing to give you any information you request. but please keep in mind
that i am a stupid user and may need some time or might fail without proper
description on how to acquire the data.
The Problem:
dmesg | grep ata -A1 #A1 for the res line
[ 3143.592481] ata2: port disabled. ignoring.
[ 3143.592645] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 3143.608280] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[ 3144.210084] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[ 3144.210213] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[ 3144.307572] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3144.307581] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3144.307624] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[ 3145.596412] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 3145.596420] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 3145.728444] ata1.00: configured for UDMA/100
[ 3145.856038] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[ 3346.989164] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3346.989463] ata1.00: cmd ca/00:28:67:b5:7e/00:00:00:00:00/e0 tag 0 dma
20480 out
[ 3346.989470] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[ 3346.990072] ata1.00: status: { DRDY }
[ 3352.032100] ata1: link is slow to respond, please be patient (ready=0)
[ 3357.016139] ata1: device not ready (errno=-16), forcing hardreset
[ 3357.016168] ata1: soft resetting link
[ 3357.196609] ata1.00: configured for UDMA/100
[ 3357.196631] ata1.00: device reported invalid CHS sector 0
[ 3357.196664] ata1: EH complete
[ 3719.768899] wlan2: deauthenticated from 00:1f:1f:52:d6:b4 (Reason: 7)
--
[13235.976559] ata_piix 0000:00:1f.2: PCI INT B disabled
[13235.992311] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[13236.686088] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[13236.686216] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[13236.784226] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[13236.784235] ata_piix 0000:00:1f.2: setting latency timer to 64
[13236.784278] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[13237.960411] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[13237.960419] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[13237.972443] ata1.00: configured for UDMA/100
[13238.228035] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[13513.988222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[13513.988263] ata1.00: cmd ca/00:08:07:93:47/00:00:00:00:00/e0 tag 0 dma 4096 out
[13513.988270] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[13513.988285] ata1.00: status: { DRDY }
[13519.028142] ata1: link is slow to respond, please be patient (ready=0)
[13524.012128] ata1: device not ready (errno=-16), forcing hardreset
[13524.012153] ata1: soft resetting link
[13524.192688] ata1.00: configured for UDMA/100
[13524.192710] ata1.00: device reported invalid CHS sector 0
[13524.192743] ata1: EH complete
[13881.114281] wlan2: deauthenticated from 00:1f:1f:52:d6:b4 (Reason: 7)
--
[15405.912548] ata_piix 0000:00:1f.2: PCI INT B disabled
[15405.928318] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[15406.626088] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[15406.626215] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[15406.723533] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15406.723542] ata_piix 0000:00:1f.2: setting latency timer to 64
[15406.723587] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[15407.900411] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[15407.900419] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[15407.912454] ata1.00: configured for UDMA/100
[15408.044037] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[15696.000177] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15696.005305] ata1.00: cmd c8/00:08:7f:a9:11/00:00:00:00:00/e0 tag 0 dma 4096 in
[15696.005313] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[15696.016463] ata1.00: status: { DRDY }
[15696.412148] ata1: soft resetting link
[15696.592651] ata1.00: configured for UDMA/100
[15696.592674] ata1.00: device reported invalid CHS sector 0
[15696.592708] ata1: EH complete
[15870.282772] wlan2: deauthenticated from 00:1f:1f:52:d6:b4 (Reason: 7)
--
[16719.572551] ata_piix 0000:00:1f.2: PCI INT B disabled
[16719.588308] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[16720.286085] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[16720.286213] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[16720.383723] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[16720.383731] ata_piix 0000:00:1f.2: setting latency timer to 64
[16720.383774] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[16721.560412] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[16721.560420] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[16721.572444] ata1.00: configured for UDMA/100
[16721.832036] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[16996.988325] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[16996.994787] ata1.00: cmd ca/00:08:cf:71:05/00:00:00:00:00/e9 tag 0 dma 4096 out
[16996.994798] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[16997.009313] ata1.00: status: { DRDY }
[17002.056161] ata1: link is slow to respond, please be patient (ready=0)
[17007.040288] ata1: device not ready (errno=-16), forcing hardreset
[17007.040313] ata1: soft resetting link
[17007.220787] ata1.00: configured for UDMA/100
[17007.220809] ata1.00: device reported invalid CHS sector 0
[17007.220842] ata1: EH complete
[17430.764604] CPU0 attaching NULL sched-domain.
--
[17433.308547] ata_piix 0000:00:1f.2: PCI INT B disabled
[17433.324312] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[17434.018090] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[17434.018217] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[17434.115146] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[17434.115155] ata_piix 0000:00:1f.2: setting latency timer to 64
[17434.115199] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[17435.348411] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[17435.348419] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[17435.472448] ata1.00: configured for UDMA/100
[17435.608036] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[17711.988348] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[17711.988390] ata1.00: cmd ca/00:08:a7:2c:00/00:00:00:00:00/e0 tag 0 dma 4096 out
[17711.988397] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[17711.988411] ata1.00: status: { DRDY }
[17717.028259] ata1: link is slow to respond, please be patient (ready=0)
[17722.016309] ata1: device not ready (errno=-16), forcing hardreset
[17722.016334] ata1: soft resetting link
[17722.196824] ata1.00: configured for UDMA/100
[17722.196846] ata1.00: device reported invalid CHS sector 0
[17722.196880] ata1: EH complete
[19580.466508] CPU0 attaching NULL sched-domain.
--
[19582.924596] ata_piix 0000:00:1f.2: PCI INT B disabled
[19582.940315] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[19583.690087] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[19583.690211] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[19583.787602] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[19583.787611] ata_piix 0000:00:1f.2: setting latency timer to 64
[19583.787655] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[19585.020411] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[19585.020419] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[19585.144449] ata1.00: configured for UDMA/100
[19585.276036] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[19857.989316] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[19857.989357] ata1.00: cmd ca/00:08:f7:32:73/00:00:00:00:00/e0 tag 0 dma 4096 out
[19857.989364] res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[19857.989378] ata1.00: status: { DRDY }
[19863.037122] ata1: link is slow to respond, please be patient (ready=0)
[19868.037107] ata1: device not ready (errno=-16), forcing hardreset
[19868.037138] ata1: soft resetting link
[19868.217826] ata1.00: configured for UDMA/100
[19868.217849] ata1.00: device reported invalid CHS sector 0
[19868.217884] ata1: EH complete
[19977.239338] wlan2: deauthenticated from 00:1f:1f:52:d6:b4 (Reason: 7)
What smart says:
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHZ2160BH G2
Serial Number: K62TT982MYCW
Firmware Version: 008B000B
User Capacity: 160,041,885,696 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3f
Local Time is: Mon Oct 19 11:12:26 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always
- 43102
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline
- 27721728
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always
- 1
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 132
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always
- 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always
- 552
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 57
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 60
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 8
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always
- 1191
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 28 (Lifetime Min/Max 18/48)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 18
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 440729600
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always
- 20
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always
- 24862
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always
- 1529028411460
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 20 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 20 occurred at disk power-on lifetime: 55 hours (2 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 05 82 a9 11 e0 Error: ICRC, ABRT 5 sectors at LBA = 0x0011a982 = 1157506
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 7f a9 11 e0 08 00:04:19.791 READ DMA
ef 10 03 9e 3e 05 a0 08 00:04:11.675 SET FEATURES [Reserved for
Serial ATA]
ea 00 00 9e 3e 05 a0 08 00:04:08.477 FLUSH CACHE EXIT
ca 00 08 97 3e 05 e9 08 00:04:08.476 WRITE DMA
ea 00 00 96 3e 05 a0 08 00:04:08.370 FLUSH CACHE EXIT
Error 19 occurred at disk power-on lifetime: 51 hours (2 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 1d 42 d0 2c e0 Error: ICRC, ABRT 29 sectors at LBA = 0x002cd042 =
2936898
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 3f d0 2c e0 08 00:17:38.198 READ DMA
ef 10 03 e6 22 04 a0 08 00:17:33.495 SET FEATURES [Reserved for
Serial ATA]
ea 00 00 e6 22 04 a0 08 00:17:31.033 FLUSH CACHE EXIT
ca 00 08 df 22 04 e9 08 00:17:31.032 WRITE DMA
ea 00 00 de 22 04 a0 08 00:17:30.907 FLUSH CACHE EXIT
Error 18 occurred at disk power-on lifetime: 46 hours (1 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 05 7a 54 23 e0 Error: ICRC, ABRT 5 sectors at LBA = 0x0023547a = 2315386
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 77 54 23 e0 08 00:23:38.596 READ DMA
ef 10 03 ce 15 04 a0 08 00:23:21.392 SET FEATURES [Reserved for
Serial ATA]
ea 00 00 ce 15 04 a0 08 00:23:19.057 FLUSH CACHE EXIT
ca 00 08 c7 15 04 e9 08 00:23:19.057 WRITE DMA
ea 00 00 c6 15 04 a0 08 00:23:18.931 FLUSH CACHE EXIT
Error 17 occurred at disk power-on lifetime: 35 hours (1 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 75 6a 7f 32 e0 Error: ICRC, ABRT 117 sectors at LBA = 0x00327f6a =
3309418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 78 67 7f 32 e0 08 00:11:59.470 READ DMA
ef 10 03 5e 65 32 a0 08 00:11:58.476 SET FEATURES [Reserved for
Serial ATA]
c8 00 08 57 65 32 e0 08 00:11:57.847 READ DMA
c8 00 08 6f 65 32 e0 08 00:11:56.337 READ DMA
c8 00 20 3f 81 09 e0 08 00:11:56.076 READ DMA
Error 16 occurred at disk power-on lifetime: 34 hours (1 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 bd 42 eb 15 e0 Error: ICRC, ABRT 189 sectors at LBA = 0x0015eb42 =
1436482
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 c0 3f eb 15 e0 08 00:45:20.835 READ DMA
ef 10 03 3e 91 20 a0 08 00:45:20.545 SET FEATURES [Reserved for
Serial ATA]
c8 00 08 37 91 20 e0 08 00:45:19.443 READ DMA
c8 00 10 f7 4a 42 e2 08 00:45:19.381 READ DMA
c8 00 08 cf a8 11 e0 08 00:45:19.351 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
lspci:
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE
Controller (rev 02) (prog-if 80 [Master])
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller
Hub (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express
Integrated Graphics Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0200000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1
<1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f0100000-f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1
<4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 4159
Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device c062
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000f0500000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1
<4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 4, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 4161
Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device c062
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02) (prog-if 20)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Samsung Electronics Co Ltd Device c062
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt, intel-rng
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 18a0 [size=32]
Kernel modules: i2c-i801
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) (rev 01)
Subsystem: Askey Computer Corp. Device 7167
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 12-14-24-ff-ff-17-15-00
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E
PCI Express Fast Ethernet controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0510000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0500000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f0520000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0100c Data: 4189
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=2
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-01
Kernel driver in use: r8169
Kernel modules: r8169
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: disk with ata_piix freezes
@ 2009-10-19 12:30 Jan Christoph Uhde
2009-10-20 1:50 ` Tejun Heo
0 siblings, 1 reply; 6+ messages in thread
From: Jan Christoph Uhde @ 2009-10-19 12:30 UTC (permalink / raw)
To: linux-ide
with acpi=off it seems to work, probably i just thought that i had tested that
option as well and just tried strict, ht, ...
Unfortunately this options causes the video card to fail under X ...
Is there any way to disable acpi for ide only? How do i identify the acpi
event and ask the piix driver to dismiss the command?
At the moment i am a bit unsure whether this is an ide or acpi problem:(
regards, jan
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: disk with ata_piix freezes
2009-10-19 10:12 Jan Christoph Uhde
@ 2009-10-20 0:39 ` Robert Hancock
0 siblings, 0 replies; 6+ messages in thread
From: Robert Hancock @ 2009-10-20 0:39 UTC (permalink / raw)
To: Jan Christoph Uhde; +Cc: linux-ide
On 10/19/2009 04:12 AM, Jan Christoph Uhde wrote:
> Hi,
> my net-book suffers serious disk freezes. I am using the ata_piix driver
> fom the latest ubuntu karmic kernel and have tried almost everything i
> could find .. every kernel option from force_pcs to .. acpi=.+ , pci=.+
> and i would really like to keep acpi .. :(
>
> Since google will not help this time i will ask here for help:
>
>
> ata port 1 device 0
> action = 0x6 i am to stupid to read the acton from libata.h:(
>
> exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> cmd ca/00:28:67:b5:7e/00:00:00:00:00/e0 tag 0 dma 20480 out
> res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
> status: { DRDY }
Unfortunately this error output is not all that useful as it just says
that a command (in this case a write) never completed. However, some of
the data from your SMART output is a bit odd:
> 199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always - 20
So looks like you had some data transfer errors..
> Error 20 occurred at disk power-on lifetime: 55 hours (2 days + 7 hours)
> When the command that caused the error occurred, the device was active
> or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 84 51 05 82 a9 11 e0 Error: ICRC, ABRT 5 sectors at LBA = 0x0011a982 =
> 1157506
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 08 7f a9 11 e0 08 00:04:19.791 READ DMA
> ef 10 03 9e 3e 05 a0 08 00:04:11.675 SET FEATURES [Reserved for Serial ATA]
> ea 00 00 9e 3e 05 a0 08 00:04:08.477 FLUSH CACHE EXIT
> ca 00 08 97 3e 05 e9 08 00:04:08.476 WRITE DMA
> ea 00 00 96 3e 05 a0 08 00:04:08.370 FLUSH CACHE EXIT
So the command failed due to a CRC error on the SATA link. There should
really be nothing the kernel or the driver could be doing that could
cause this on a SATA device. What's the model of this netbook? This
sounds like some kind of hardware issue to me..
I suspect that disabling ACPI only helps by coincidence (changes power
usage pattern or something) as it has a lot of effects on the system,
and isn't really a practical thing to do on any modern system because of
the amount of functionality that this disables..
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: disk with ata_piix freezes
2009-10-19 12:30 disk with ata_piix freezes Jan Christoph Uhde
@ 2009-10-20 1:50 ` Tejun Heo
2009-10-20 8:19 ` Jan Christoph Uhde
0 siblings, 1 reply; 6+ messages in thread
From: Tejun Heo @ 2009-10-20 1:50 UTC (permalink / raw)
To: Jan Christoph Uhde; +Cc: linux-ide
Jan Christoph Uhde wrote:
> with acpi=off it seems to work, probably i just thought that i had
> tested that option as well and just tried strict, ht, ...
> Unfortunately this options causes the video card to fail under X ...
>
> Is there any way to disable acpi for ide only? How do i identify the
> acpi event and ask the piix driver to dismiss the command?
>
> At the moment i am a bit unsure whether this is an ide or acpi problem:(
Is it a samsung laptop? Can you please post dmidecode?
--
tejun
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: disk with ata_piix freezes
2009-10-20 1:50 ` Tejun Heo
@ 2009-10-20 8:19 ` Jan Christoph Uhde
2009-10-20 9:50 ` Tejun Heo
0 siblings, 1 reply; 6+ messages in thread
From: Jan Christoph Uhde @ 2009-10-20 8:19 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide
[-- Attachment #1: Type: text/plain, Size: 93 bytes --]
>
> Is it a samsung laptop? Can you please post dmidecode?
>
Yes it is a Samsung N140
[-- Attachment #2: dmidecode.log --]
[-- Type: text/x-log, Size: 9047 bytes --]
# dmidecode 2.9
SMBIOS 2.5 present.
36 structures occupying 1344 bytes.
Table at 0x000DF010.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies Ltd.
Version: 02CU.M004.20090901.CYH
Release Date: 09/01/2009
Address: 0xE6320
Runtime Size: 105696 bytes
ROM Size: 2048 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
ACPI is supported
USB legacy is supported
Smart battery is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 2.0
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
Product Name: N140
Version: Not Applicable
Serial Number: ZJHJ93HS903013
UUID: E0F51F2A-D21D-B211-8000-F6E9A9C18C28
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
Product Name: N140
Version: Not Applicable
Serial Number: 123490EN400015
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: C2 06 01 00 FF FB E9 BF
Version: CPU Version
Voltage: 3.3 V
External Clock: Unknown
Max Speed: 4096 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 1
Core Enabled: 1
Thread Count: 2
Characteristics: None
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 4096 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J19
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: COM 1
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Mouse Port
Handle 0x000A, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot JEXP1
Type: 32-bit PCI Express
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000B, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: HD-Audio
Handle 0x000C, DMI type 11, 5 bytes
OEM Strings
String 1: AABAAAAAAAAA
String 2: 2009/10
Handle 0x000D, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x000E, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000F, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: DDR2
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: Mfg 0
Serial Number: 1234-B0
Asset Tag: Not Specified
Part Number: SODIMM000
Handle 0x0010, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: SODIMM
Set: 1
Locator: M2
Bank Locator: Bank 1
Type: DDR2
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: Mfg 1
Serial Number: 1234-B1
Asset Tag: Not Specified
Part Number: SODIMM001
Handle 0x0011, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0012, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0013, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x000E
Partition Width: 0
Handle 0x0014, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x000F
Memory Array Mapped Address Handle: 0x0013
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0015, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x0007FFFFC00
Ending Address: 0x0007FFFFFFF
Range Size: 1 kB
Physical Device Handle: 0x0010
Memory Array Mapped Address Handle: 0x0013
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0016, DMI type 22, 26 bytes
Portable Battery
Location: Rear
Manufacturer: Intel Corporation
Name: Intel Corporation
Chemistry: Lithium Ion
Design Capacity: 1000 mWh
Design Voltage: 19 mV
SBDS Version: BATT_1234
Maximum Error: 100%
SBDS Serial Number: 0001
SBDS Manufacture Date: 1980-00-01
OEM-specific Information: 0x00000000
Handle 0x0017, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x0018, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown
Handle 0x0019, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59
Handle 0x001A, DMI type 26, 20 bytes
Voltage Probe
Description: Voltage Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x001B, DMI type 27, 12 bytes
Cooling Device
Temperature Probe Handle: 0x001C
Type: Fan
Status: OK
OEM-specific Information: 0x00000000
Handle 0x001C, DMI type 28, 20 bytes
Temperature Probe
Description: Temperature Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x001D, DMI type 29, 20 bytes
Electrical Current Probe
Description: Electrical Current Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x001E, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Enabled
Outbound Connection: Disabled
Handle 0x001F, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0020, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 20 00 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x0021, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 21 00 FF FF
Handle 0x0022, DMI type 150, 14 bytes
OEM-specific Type
Header and Data:
96 0E 22 00 01 01 00 00 00 00 00 00 00 00
Strings:
ABSOLUTE(PHOENIX) CLM
Handle 0x0023, DMI type 127, 4 bytes
End Of Table
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: disk with ata_piix freezes
2009-10-20 8:19 ` Jan Christoph Uhde
@ 2009-10-20 9:50 ` Tejun Heo
0 siblings, 0 replies; 6+ messages in thread
From: Tejun Heo @ 2009-10-20 9:50 UTC (permalink / raw)
To: Jan Christoph Uhde; +Cc: linux-ide
Jan Christoph Uhde wrote:
>>
>> Is it a samsung laptop? Can you please post dmidecode?
>>
>
> Yes it is a Samsung N140
Yeah, there's another reporter reporting the same problem. Can you
please cc yourself in the following bz and add a me too message there
and attach system information?
http://bugzilla.kernel.org/show_bug.cgi?id=13416
This looks like an acpi problem to me but we're not sure yet.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-10-20 9:49 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-19 12:30 disk with ata_piix freezes Jan Christoph Uhde
2009-10-20 1:50 ` Tejun Heo
2009-10-20 8:19 ` Jan Christoph Uhde
2009-10-20 9:50 ` Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2009-10-19 10:12 Jan Christoph Uhde
2009-10-20 0:39 ` Robert Hancock
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).