From: Tom van Klinken / ISP Services BV <tom@isp-services.nl>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: Problem with ICH10R and Port Multipliers
Date: Tue, 20 Oct 2009 09:02:00 +0200 [thread overview]
Message-ID: <4ADD6068.4050402@isp-services.nl> (raw)
In-Reply-To: <4ADD1747.5070000@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 681 bytes --]
Hi Tejun,
Tejun Heo wrote:
> Tom van Klinken / ISP Services BV wrote:
>> <CUT>
>>
>> Did they deliberately turn PMP support off?
>
> IIRC, since ICH8 or 9, intel ahcis do support PMP. The flag can be
> controlled by the BIOS. Hmmm.... maybe you can just comment out the
> code and force ahci to enable PMP. My gut feeling is that it'll
> probably work. Maybe we need to add quirks or a parameter to force
> it. Can you please verify it works?
>
I tried forcing PMP to on. This does cause the Multiplier to be
detected. However it does not detect the 2 drives attached to it.
--
Met vriendelijke groet,
Tom van Klinken
ISP Services BV
http://www.isp-services.nl/contact
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 40435 bytes --]
Linux version 2.6.32-rc4 (root@desiato) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #3 SMP Tue Oct 20 08:27:02 CEST 2009
Command line: root=/dev/sda2
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bd8a9000 (usable)
BIOS-e820: 00000000bd8a9000 - 00000000bd92b000 (ACPI NVS)
BIOS-e820: 00000000bd92b000 - 00000000bda42000 (reserved)
BIOS-e820: 00000000bda42000 - 00000000bda56000 (ACPI NVS)
BIOS-e820: 00000000bda56000 - 00000000bdb56000 (reserved)
BIOS-e820: 00000000bdb56000 - 00000000bdb5e000 (ACPI data)
BIOS-e820: 00000000bdb5e000 - 00000000bdb68000 (ACPI NVS)
BIOS-e820: 00000000bdb68000 - 00000000bdb8a000 (reserved)
BIOS-e820: 00000000bdb8a000 - 00000000bdb90000 (ACPI NVS)
BIOS-e820: 00000000bdb90000 - 00000000bdd00000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
DMI 2.4 present.
last_pfn = 0x13c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0BDD00000 mask FFFF00000 write-through
2 base 0BDE00000 mask FFFE00000 uncachable
3 base 0BE000000 mask FFE000000 uncachable
4 base 0C0000000 mask FC0000000 uncachable
5 base 100000000 mask FC0000000 write-back
6 base 13C000000 mask FFC000000 uncachable
last_pfn = 0xbdd00 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bdd00000
0000000000 - 00bdc00000 page 2M
00bdc00000 - 00bdd00000 page 4k
kernel direct mapping tables up to bdd00000 @ 8000-d000
init_memory_mapping: 0000000100000000-000000013c000000
0100000000 - 013c000000 page 2M
kernel direct mapping tables up to 13c000000 @ b000-11000
ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
ACPI: XSDT 00000000bdb5ce18 00044 (v01 INTEL DG45FC 00000075 MSFT 00010013)
ACPI: FACP 00000000bdb5bd98 000F4 (v04 INTEL A M I 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - BDB5FF40/00000000BDB65E40, using 32 (20090903/tbfadt-486)
ACPI: DSDT 00000000bdb56018 0492F (v01 INTEL DG45FC 00000075 INTL 20051117)
ACPI: FACS 00000000bdb5ff40 00040
ACPI: APIC 00000000bdb5bf18 0006C (v02 INTEL DG45FC 00000075 MSFT 00010013)
ACPI: MCFG 00000000bdb66d98 0003C (v01 INTEL DG45FC 00000075 MSFT 00000097)
ACPI: ASF! 00000000bdb65c18 000A0 (v32 INTEL DG45FC 00000075 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000013c000000
Bootmem setup node 0 0000000000000000-000000013c000000
NODE_DATA [0000000000001000 - 0000000000004fff]
bootmap [000000000000c000 - 00000000000337ff] pages 28
(7 early reservations) ==> bootmem [0000000000 - 013c000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00018a90b4] TEXT DATA BSS ==> [0001000000 - 00018a90b4]
#3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#4 [00018aa000 - 00018aa19c] BRK ==> [00018aa000 - 00018aa19c]
#5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0013c000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009e
0: 0x00000100 -> 0x000bd8a9
0: 0x000bdb90 -> 0x000bdd00
0: 0x00100000 -> 0x0013c000
On node 0 totalpages: 1022391
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3838 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 758353 pages, LIFO batch:31
Normal zone: 3360 pages used for memmap
Normal zone: 242400 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bd8a9000 - 00000000bd92b000
PM: Registered nosave memory: 00000000bd92b000 - 00000000bda42000
PM: Registered nosave memory: 00000000bda42000 - 00000000bda56000
PM: Registered nosave memory: 00000000bda56000 - 00000000bdb56000
PM: Registered nosave memory: 00000000bdb56000 - 00000000bdb5e000
PM: Registered nosave memory: 00000000bdb5e000 - 00000000bdb68000
PM: Registered nosave memory: 00000000bdb68000 - 00000000bdb8a000
PM: Registered nosave memory: 00000000bdb8a000 - 00000000bdb90000
PM: Registered nosave memory: 00000000bdd00000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bdd00000 (gap: bdd00000:4101c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff880028200000 s70104 r8192 d24104 u524288
pcpu-alloc: s70104 r8192 d24104 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004591
Policy zone: Normal
Kernel command line: root=/dev/sda2
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3956744k/5177344k available (4668k kernel code, 1087780k absent, 132820k reserved, 2834k data, 656k init)
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2666.622 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.24 BogoMIPS (lpj=10666488)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5333.03 BogoMIPS (lpj=10666072)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5333.06 BogoMIPS (lpj=10666128)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
mce: CPU supports 6 MCE banks
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5333.06 BogoMIPS (lpj=10666124)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 3/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
mce: CPU supports 6 MCE banks
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (21332.40 BogoMIPS).
xor: automatically using best checksumming function: generic_sse
generic_sse: 10223.000 MB/sec
xor: using function: generic_sse (10223.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 20 io port: [0xf1c0-0xf1c7]
pci 0000:00:02.1: reg 10 64bit mmio: [0xd0400000-0xd04fffff]
pci 0000:00:03.0: reg 10 64bit mmio: [0xd0522100-0xd052210f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xd0500000-0xd051ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xd0520000-0xd0520fff]
pci 0000:00:19.0: reg 18 io port: [0xf100-0xf11f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xf0e0-0xf0ff]
pci 0000:00:1a.1: reg 20 io port: [0xf0c0-0xf0df]
pci 0000:00:1a.2: reg 20 io port: [0xf0a0-0xf0bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0521c00-0xd0521fff]
pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f]
pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f]
pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0521800-0xd0521bff]
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7]
pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3]
pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197]
pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183]
pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0521000-0xd05217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xd0522000-0xd05220ff]
pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
pci 0000:00:1f.5: reg 10 io port: [0xf170-0xf177]
pci 0000:00:1f.5: reg 14 io port: [0xf160-0xf163]
pci 0000:00:1f.5: reg 18 io port: [0xf150-0xf157]
pci 0000:00:1f.5: reg 1c io port: [0xf140-0xf143]
pci 0000:00:1f.5: reg 20 io port: [0xf130-0xf13f]
pci 0000:00:1f.5: reg 24 io port: [0xf120-0xf12f]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1 2233 MB/s
raid6: int64x2 2965 MB/s
raid6: int64x4 2298 MB/s
raid6: int64x8 2020 MB/s
raid6: sse2x1 4839 MB/s
raid6: sse2x2 5042 MB/s
raid6: sse2x4 7865 MB/s
raid6: using algorithm sse2x4 (7865 MB/s)
PCI: Using ACPI for IRQ routing
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:02: ioport range 0xa20-0xa3f has been reserved
system 00:02: ioport range 0xa00-0xa1f has been reserved
system 00:02: ioport range 0xb78-0xb7f has been reserved
system 00:02: ioport range 0xf78-0xf7f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x400-0x47f has been reserved
system 00:09: ioport range 0x1180-0x119f has been reserved
system 00:09: ioport range 0x500-0x57f could not be reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed9ffff has been reserved
system 00:09: iomem range 0xff000000-0xffffffff has been reserved
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 7728
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000bdb5fc18 002CC (v01 AMI IST 00000001 MSFT 03000001)
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #0
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 24 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521100 irq 24
ata2: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521180 irq 24
ata3: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521200 irq 24
ata4: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521280 irq 24
ata5: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521300 irq 24
ata6: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521380 irq 24
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:9c:28:02
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
Copyright (c) 2007-2009 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
console [netcon0] enabled
netconsole: network logging started
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0521c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0521800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f0a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
raid6test: testing the 4-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK
raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK
raid6test: testing the 5-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK
raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK
raid6test: testing the 16-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK
raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK
raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK
raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK
raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK
raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK
raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK
raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK
raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK
raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK
raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK
raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK
raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK
raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK
raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK
raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK
raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK
raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK
raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK
raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK
raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK
raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK
raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK
raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK
raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK
raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK
raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK
raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK
raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK
raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK
raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK
raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK
raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK
raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK
raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK
raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK
raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK
raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK
raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK
raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK
raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK
raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK
raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK
raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK
raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK
raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK
raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK
raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK
raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK
raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK
raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK
raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK
raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK
raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK
raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK
raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK
raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK
raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK
raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK
raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK
raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK
raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK
raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK
raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK
raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK
raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK
raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK
raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK
raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK
raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK
raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK
raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK
raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK
raid6test:
raid6test: complete (136 tests, 0 failures)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
ata1.15: applying bridge limits
ata1.00: hard resetting link
scsi 6:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: [sda] 7716864 512-byte logical blocks: (3.95 GB/3.67 GiB)
sd 6:0:0:0: [sda] Write Protect is off
usb-storage: device scan complete
sd 6:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda:
ata1.00: SATA link down (SStatus 0 SControl 310)
ata1.01: hard resetting link
sda1 sda2
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] Attached SCSI removable disk
ata1.01: SATA link down (SStatus 0 SControl 320)
ata1.02: hard resetting link
ata1.02: SATA link down (SStatus 0 SControl 320)
ata1.03: hard resetting link
ata1.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.04: hard resetting link
ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.05: hard resetting link
ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
------------[ cut here ]------------
WARNING: at drivers/ata/libata-core.c:5039 ata_qc_complete+0x92/0x1f4()
Hardware name:
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.32-rc4 #3
Call Trace:
<IRQ> [<ffffffff812818da>] ? ata_qc_complete+0x92/0x1f4
[<ffffffff812818da>] ? ata_qc_complete+0x92/0x1f4
[<ffffffff81037129>] ? warn_slowpath_common+0x77/0xa3
[<ffffffff812818da>] ? ata_qc_complete+0x92/0x1f4
[<ffffffff8128c67e>] ? ata_do_link_abort+0x94/0xc4
[<ffffffff81294f56>] ? ahci_interrupt+0x3c5/0x453
[<ffffffff810620c4>] ? handle_IRQ_event+0x2b/0xbd
[<ffffffff810637f8>] ? handle_edge_irq+0xdc/0x11c
[<ffffffff8100d5aa>] ? handle_irq+0x81/0x87
[<ffffffff8100ca42>] ? do_IRQ+0x57/0xbb
[<ffffffff8100b7d3>] ? ret_from_intr+0x0/0x11
<EOI> [<ffffffff81224042>] ? acpi_idle_enter_simple+0x15d/0x18f
[<ffffffff8122403b>] ? acpi_idle_enter_simple+0x156/0x18f
[<ffffffff81223cc6>] ? acpi_idle_enter_bm+0xd1/0x2f0
[<ffffffff81374a0e>] ? menu_select+0x145/0x205
[<ffffffff81373dc8>] ? cpuidle_idle_call+0x8b/0xc7
[<ffffffff8100a27b>] ? cpu_idle+0x59/0x91
---[ end trace fe580ff527fd1e85 ]---
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x100)
ata1.15: hard resetting link
ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: hard resetting link
ata1.00: SATA link down (SStatus 0 SControl 310)
ata1.01: hard resetting link
ata1.01: SATA link down (SStatus 0 SControl 320)
ata1.02: hard resetting link
ata1.02: SATA link down (SStatus 0 SControl 320)
ata1.03: hard resetting link
ata1.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.04: hard resetting link
ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.05: hard resetting link
ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x100)
ata1.15: hard resetting link
ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: hard resetting link
ata1.00: SATA link down (SStatus 0 SControl 310)
ata1.01: hard resetting link
ata1.01: SATA link down (SStatus 0 SControl 320)
ata1.02: hard resetting link
ata1.02: SATA link down (SStatus 0 SControl 320)
ata1.03: hard resetting link
ata1.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.04: hard resetting link
ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.05: hard resetting link
ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x100)
ata1.03: failed to recover link after 3 tries, disabling
ata1.15: hard resetting link
ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: hard resetting link
ata1.00: SATA link down (SStatus 0 SControl 310)
ata1.01: hard resetting link
ata1.01: SATA link down (SStatus 0 SControl 320)
ata1.02: hard resetting link
ata1.02: SATA link down (SStatus 0 SControl 320)
ata1.04: hard resetting link
ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.05: hard resetting link
ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.04: failed to IDENTIFY (I/O error, err_mask=0x100)
ata1.15: hard resetting link
ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: hard resetting link
ata1.00: SATA link down (SStatus 0 SControl 310)
ata1.01: hard resetting link
ata1.01: SATA link down (SStatus 0 SControl 320)
ata1.02: hard resetting link
ata1.02: SATA link down (SStatus 0 SControl 320)
ata1.04: hard resetting link
ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.05: hard resetting link
ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.04: failed to IDENTIFY (I/O error, err_mask=0x100)
ata1.15: hard resetting link
ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: hard resetting link
ata1.00: SATA link down (SStatus 0 SControl 310)
ata1.01: hard resetting link
ata1.01: SATA link down (SStatus 0 SControl 320)
ata1.02: hard resetting link
ata1.02: SATA link down (SStatus 0 SControl 320)
ata1.04: hard resetting link
ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.05: hard resetting link
ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.04: failed to IDENTIFY (I/O error, err_mask=0x100)
ata1.04: failed to recover link after 3 tries, disabling
ata1.15: hard resetting link
ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: hard resetting link
ata1.00: SATA link down (SStatus 0 SControl 310)
ata1.01: hard resetting link
ata1.01: SATA link down (SStatus 0 SControl 320)
ata1.02: hard resetting link
ata1.02: SATA link down (SStatus 0 SControl 320)
ata1.05: hard resetting link
ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1: EH complete
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 656k freed
udev: starting version 141
EXT3 FS on sda2, internal journal
e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
prev parent reply other threads:[~2009-10-20 7:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-19 16:14 Problem with ICH10R and Port Multipliers Tom van Klinken / ISP Services BV
2009-10-20 0:46 ` Robert Hancock
2009-10-20 1:49 ` Tejun Heo
2009-10-20 7:02 ` Tom van Klinken / ISP Services BV [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ADD6068.4050402@isp-services.nl \
--to=tom@isp-services.nl \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).