From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom van Klinken / ISP Services BV Subject: Re: Problem with ICH10R and Port Multipliers Date: Tue, 20 Oct 2009 09:02:00 +0200 Message-ID: <4ADD6068.4050402@isp-services.nl> References: <4ADC9058.4090701@isp-services.nl> <4ADD1747.5070000@kernel.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------030401020803060009020009" Return-path: Received: from mail26-tower01.nl.cleanport.com ([212.79.242.218]:36639 "EHLO mail26-tower01.nl.cleanport.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751103AbZJTHC2 (ORCPT ); Tue, 20 Oct 2009 03:02:28 -0400 In-Reply-To: <4ADD1747.5070000@kernel.org> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: linux-ide@vger.kernel.org This is a multi-part message in MIME format. --------------030401020803060009020009 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi Tejun, Tejun Heo wrote: > Tom van Klinken / ISP Services BV wrote: >> >> >> Did they deliberately turn PMP support off? > > IIRC, since ICH8 or 9, intel ahcis do support PMP. The flag can be > controlled by the BIOS. Hmmm.... maybe you can just comment out the > code and force ahci to enable PMP. My gut feeling is that it'll > probably work. Maybe we need to add quirks or a parameter to force > it. Can you please verify it works? > I tried forcing PMP to on. This does cause the Multiplier to be detected. However it does not detect the 2 drives attached to it. -- Met vriendelijke groet, Tom van Klinken ISP Services BV http://www.isp-services.nl/contact --------------030401020803060009020009 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Linux version 2.6.32-rc4 (root@desiato) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #3 SMP Tue Oct 20 08:27:02 CEST 2009 Command line: root=/dev/sda2 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bd8a9000 (usable) BIOS-e820: 00000000bd8a9000 - 00000000bd92b000 (ACPI NVS) BIOS-e820: 00000000bd92b000 - 00000000bda42000 (reserved) BIOS-e820: 00000000bda42000 - 00000000bda56000 (ACPI NVS) BIOS-e820: 00000000bda56000 - 00000000bdb56000 (reserved) BIOS-e820: 00000000bdb56000 - 00000000bdb5e000 (ACPI data) BIOS-e820: 00000000bdb5e000 - 00000000bdb68000 (ACPI NVS) BIOS-e820: 00000000bdb68000 - 00000000bdb8a000 (reserved) BIOS-e820: 00000000bdb8a000 - 00000000bdb90000 (ACPI NVS) BIOS-e820: 00000000bdb90000 - 00000000bdd00000 (usable) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) DMI 2.4 present. last_pfn = 0x13c000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 0BDD00000 mask FFFF00000 write-through 2 base 0BDE00000 mask FFFE00000 uncachable 3 base 0BE000000 mask FFE000000 uncachable 4 base 0C0000000 mask FC0000000 uncachable 5 base 100000000 mask FC0000000 write-back 6 base 13C000000 mask FFC000000 uncachable last_pfn = 0xbdd00 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bdd00000 0000000000 - 00bdc00000 page 2M 00bdc00000 - 00bdd00000 page 4k kernel direct mapping tables up to bdd00000 @ 8000-d000 init_memory_mapping: 0000000100000000-000000013c000000 0100000000 - 013c000000 page 2M kernel direct mapping tables up to 13c000000 @ b000-11000 ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL) ACPI: XSDT 00000000bdb5ce18 00044 (v01 INTEL DG45FC 00000075 MSFT 00010013) ACPI: FACP 00000000bdb5bd98 000F4 (v04 INTEL A M I 06222004 MSFT 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) ACPI Warning: 32/64X FACS address mismatch in FADT - BDB5FF40/00000000BDB65E40, using 32 (20090903/tbfadt-486) ACPI: DSDT 00000000bdb56018 0492F (v01 INTEL DG45FC 00000075 INTL 20051117) ACPI: FACS 00000000bdb5ff40 00040 ACPI: APIC 00000000bdb5bf18 0006C (v02 INTEL DG45FC 00000075 MSFT 00010013) ACPI: MCFG 00000000bdb66d98 0003C (v01 INTEL DG45FC 00000075 MSFT 00000097) ACPI: ASF! 00000000bdb65c18 000A0 (v32 INTEL DG45FC 00000075 TFSM 000F4240) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000013c000000 Bootmem setup node 0 0000000000000000-000000013c000000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000c000 - 00000000000337ff] pages 28 (7 early reservations) ==> bootmem [0000000000 - 013c000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00018a90b4] TEXT DATA BSS ==> [0001000000 - 00018a90b4] #3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #4 [00018aa000 - 00018aa19c] BRK ==> [00018aa000 - 00018aa19c] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0013c000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x000bd8a9 0: 0x000bdb90 -> 0x000bdd00 0: 0x00100000 -> 0x0013c000 On node 0 totalpages: 1022391 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3838 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 758353 pages, LIFO batch:31 Normal zone: 3360 pages used for memmap Normal zone: 242400 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bd8a9000 - 00000000bd92b000 PM: Registered nosave memory: 00000000bd92b000 - 00000000bda42000 PM: Registered nosave memory: 00000000bda42000 - 00000000bda56000 PM: Registered nosave memory: 00000000bda56000 - 00000000bdb56000 PM: Registered nosave memory: 00000000bdb56000 - 00000000bdb5e000 PM: Registered nosave memory: 00000000bdb5e000 - 00000000bdb68000 PM: Registered nosave memory: 00000000bdb68000 - 00000000bdb8a000 PM: Registered nosave memory: 00000000bdb8a000 - 00000000bdb90000 PM: Registered nosave memory: 00000000bdd00000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 Allocating PCI resources starting at bdd00000 (gap: bdd00000:4101c000) Booting paravirtualized kernel on bare hardware NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880028200000 s70104 r8192 d24104 u524288 pcpu-alloc: s70104 r8192 d24104 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004591 Policy zone: Normal Kernel command line: root=/dev/sda2 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3956744k/5177344k available (4668k kernel code, 1087780k absent, 132820k reserved, 2834k data, 656k init) Hierarchical RCU implementation. NR_IRQS:512 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2666.622 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.24 BogoMIPS (lpj=10666488) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5333.03 BogoMIPS (lpj=10666072) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5333.06 BogoMIPS (lpj=10666128) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 2/0x2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 mce: CPU supports 6 MCE banks CPU2: Thermal monitoring enabled (TM2) CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5333.06 BogoMIPS (lpj=10666124) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 3/0x3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 mce: CPU supports 6 MCE banks CPU3: Thermal monitoring enabled (TM2) CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (21332.40 BogoMIPS). xor: automatically using best checksumming function: generic_sse generic_sse: 10223.000 MB/sec xor: using function: generic_sse (10223.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:02.0: reg 20 io port: [0xf1c0-0xf1c7] pci 0000:00:02.1: reg 10 64bit mmio: [0xd0400000-0xd04fffff] pci 0000:00:03.0: reg 10 64bit mmio: [0xd0522100-0xd052210f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:19.0: reg 10 32bit mmio: [0xd0500000-0xd051ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xd0520000-0xd0520fff] pci 0000:00:19.0: reg 18 io port: [0xf100-0xf11f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xf0e0-0xf0ff] pci 0000:00:1a.1: reg 20 io port: [0xf0c0-0xf0df] pci 0000:00:1a.2: reg 20 io port: [0xf0a0-0xf0bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0521c00-0xd0521fff] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0521800-0xd0521bff] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7] pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3] pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197] pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0521000-0xd05217ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xd0522000-0xd05220ff] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] pci 0000:00:1f.5: reg 10 io port: [0xf170-0xf177] pci 0000:00:1f.5: reg 14 io port: [0xf160-0xf163] pci 0000:00:1f.5: reg 18 io port: [0xf150-0xf157] pci 0000:00:1f.5: reg 1c io port: [0xf140-0xf143] pci 0000:00:1f.5: reg 20 io port: [0xf130-0xf13f] pci 0000:00:1f.5: reg 24 io port: [0xf120-0xf12f] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 2233 MB/s raid6: int64x2 2965 MB/s raid6: int64x4 2298 MB/s raid6: int64x8 2020 MB/s raid6: sse2x1 4839 MB/s raid6: sse2x2 5042 MB/s raid6: sse2x4 7865 MB/s raid6: using algorithm sse2x4 (7865 MB/s) PCI: Using ACPI for IRQ routing hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed08000-0xfed08fff has been reserved system 00:02: ioport range 0xa20-0xa3f has been reserved system 00:02: ioport range 0xa00-0xa1f has been reserved system 00:02: ioport range 0xb78-0xb7f has been reserved system 00:02: ioport range 0xf78-0xf7f has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x400-0x47f has been reserved system 00:09: ioport range 0x1180-0x119f has been reserved system 00:09: ioport range 0x500-0x57f could not be reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:09: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:09: iomem range 0xfed20000-0xfed9ffff has been reserved system 00:09: iomem range 0xff000000-0xffffffff has been reserved pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 7728 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: SSDT 00000000bdb5fc18 002CC (v01 AMI IST 00000001 MSFT 03000001) Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 Switched to NOHz mode on CPU #3 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 Real Time Clock Driver v1.12b Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A floppy0: no floppy controllers found brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 24 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521100 irq 24 ata2: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521180 irq 24 ata3: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521200 irq 24 ata4: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521280 irq 24 ata5: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521300 irq 24 ata6: SATA max UDMA/133 abar m2048@0xd0521000 port 0xd0521380 irq 24 Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 25 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:9c:28:02 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 Copyright (c) 2007-2009 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0521c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0521800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0c0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f0a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller raid6test: testing the 4-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK raid6test: testing the 5-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK raid6test: testing the 16-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK raid6test: raid6test: complete (136 tests, 0 failures) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) usb 1-5: new high speed USB device using ehci_hcd and address 2 usb 1-5: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 ata1.15: applying bridge limits ata1.00: hard resetting link scsi 6:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2 sd 6:0:0:0: Attached scsi generic sg0 type 0 sd 6:0:0:0: [sda] 7716864 512-byte logical blocks: (3.95 GB/3.67 GiB) sd 6:0:0:0: [sda] Write Protect is off usb-storage: device scan complete sd 6:0:0:0: [sda] Mode Sense: 00 00 00 00 sd 6:0:0:0: [sda] Assuming drive cache: write through sd 6:0:0:0: [sda] Assuming drive cache: write through sda: ata1.00: SATA link down (SStatus 0 SControl 310) ata1.01: hard resetting link sda1 sda2 sd 6:0:0:0: [sda] Assuming drive cache: write through sd 6:0:0:0: [sda] Attached SCSI removable disk ata1.01: SATA link down (SStatus 0 SControl 320) ata1.02: hard resetting link ata1.02: SATA link down (SStatus 0 SControl 320) ata1.03: hard resetting link ata1.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.04: hard resetting link ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.05: hard resetting link ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) ------------[ cut here ]------------ WARNING: at drivers/ata/libata-core.c:5039 ata_qc_complete+0x92/0x1f4() Hardware name: Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.32-rc4 #3 Call Trace: [] ? ata_qc_complete+0x92/0x1f4 [] ? ata_qc_complete+0x92/0x1f4 [] ? warn_slowpath_common+0x77/0xa3 [] ? ata_qc_complete+0x92/0x1f4 [] ? ata_do_link_abort+0x94/0xc4 [] ? ahci_interrupt+0x3c5/0x453 [] ? handle_IRQ_event+0x2b/0xbd [] ? handle_edge_irq+0xdc/0x11c [] ? handle_irq+0x81/0x87 [] ? do_IRQ+0x57/0xbb [] ? ret_from_intr+0x0/0x11 [] ? acpi_idle_enter_simple+0x15d/0x18f [] ? acpi_idle_enter_simple+0x156/0x18f [] ? acpi_idle_enter_bm+0xd1/0x2f0 [] ? menu_select+0x145/0x205 [] ? cpuidle_idle_call+0x8b/0xc7 [] ? cpu_idle+0x59/0x91 ---[ end trace fe580ff527fd1e85 ]--- ata1.03: failed to IDENTIFY (I/O error, err_mask=0x100) ata1.15: hard resetting link ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: hard resetting link ata1.00: SATA link down (SStatus 0 SControl 310) ata1.01: hard resetting link ata1.01: SATA link down (SStatus 0 SControl 320) ata1.02: hard resetting link ata1.02: SATA link down (SStatus 0 SControl 320) ata1.03: hard resetting link ata1.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.04: hard resetting link ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.05: hard resetting link ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) ata1.03: failed to IDENTIFY (I/O error, err_mask=0x100) ata1.15: hard resetting link ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: hard resetting link ata1.00: SATA link down (SStatus 0 SControl 310) ata1.01: hard resetting link ata1.01: SATA link down (SStatus 0 SControl 320) ata1.02: hard resetting link ata1.02: SATA link down (SStatus 0 SControl 320) ata1.03: hard resetting link ata1.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.04: hard resetting link ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.05: hard resetting link ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) ata1.03: failed to IDENTIFY (I/O error, err_mask=0x100) ata1.03: failed to recover link after 3 tries, disabling ata1.15: hard resetting link ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: hard resetting link ata1.00: SATA link down (SStatus 0 SControl 310) ata1.01: hard resetting link ata1.01: SATA link down (SStatus 0 SControl 320) ata1.02: hard resetting link ata1.02: SATA link down (SStatus 0 SControl 320) ata1.04: hard resetting link ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.05: hard resetting link ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) ata1.04: failed to IDENTIFY (I/O error, err_mask=0x100) ata1.15: hard resetting link ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: hard resetting link ata1.00: SATA link down (SStatus 0 SControl 310) ata1.01: hard resetting link ata1.01: SATA link down (SStatus 0 SControl 320) ata1.02: hard resetting link ata1.02: SATA link down (SStatus 0 SControl 320) ata1.04: hard resetting link ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.05: hard resetting link ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) ata1.04: failed to IDENTIFY (I/O error, err_mask=0x100) ata1.15: hard resetting link ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: hard resetting link ata1.00: SATA link down (SStatus 0 SControl 310) ata1.01: hard resetting link ata1.01: SATA link down (SStatus 0 SControl 320) ata1.02: hard resetting link ata1.02: SATA link down (SStatus 0 SControl 320) ata1.04: hard resetting link ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.05: hard resetting link ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) ata1.04: failed to IDENTIFY (I/O error, err_mask=0x100) ata1.04: failed to recover link after 3 tries, disabling ata1.15: hard resetting link ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: hard resetting link ata1.00: SATA link down (SStatus 0 SControl 310) ata1.01: hard resetting link ata1.01: SATA link down (SStatus 0 SControl 320) ata1.02: hard resetting link ata1.02: SATA link down (SStatus 0 SControl 320) ata1.05: hard resetting link ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) ata1: EH complete md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:2. Freeing unused kernel memory: 656k freed udev: starting version 141 EXT3 FS on sda2, internal journal e1000e 0000:00:19.0: irq 25 for MSI/MSI-X e1000e 0000:00:19.0: irq 25 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present --------------030401020803060009020009--