From: Peter Klotz <peter.klotz@aon.at>
To: linux-ide@vger.kernel.org
Subject: Errors when powering on eSATA box
Date: Thu, 29 Oct 2009 21:41:10 +0100 [thread overview]
Message-ID: <4AE9FDE6.5040203@aon.at> (raw)
I have an eSATA box (2 HDDs) that when operated in BIG mode shows lots
of errors during startup.
Both HDDs are started then stopped and started again.
When first starting up the system reports a size of 7.99 GiB, finally
the correct value of 2.72 TiB is displayed.
Can I trust a system showing the errors below?
Regards, Peter.
[ 8893.208921] ata6: hard resetting link
[ 8898.990123] ata6: link is slow to respond, please be patient (ready=0)
[ 8901.332637] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8901.333317] ACPI Error: Attempt to CreateField of length zero
20090521 dsopcode-529
[ 8901.333334] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.RATA] (Node ffff88013ba324c0), AE_AML_OPERAND_VALUE
[ 8901.333458] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.PRT5._GTF] (Node ffff88013ba326a0), AE_AML_OPERAND_VALUE
[ 8901.333586] ata6.00: _GTF evaluation failed (AE 0x3004)
[ 8901.333596] ata6.00: ATA-7: Config Disk 0, 1.1589, max MWDMA2
[ 8901.333603] ata6.00: 16777215 sectors, multi 1: LBA
[ 8901.334284] ACPI Error: Attempt to CreateField of length zero
20090521 dsopcode-529
[ 8901.334299] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.RATA] (Node ffff88013ba324c0), AE_AML_OPERAND_VALUE
[ 8901.334420] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.PRT5._GTF] (Node ffff88013ba326a0), AE_AML_OPERAND_VALUE
[ 8901.334547] ata6.00: _GTF evaluation failed (AE 0x3004)
[ 8901.334584] ata6.00: configured for PIO4
[ 8901.334599] ata6: EH complete
[ 8901.334770] scsi 5:0:0:0: Direct-Access ATA Config Disk 0
1.15 PQ: 0 ANSI: 5
[ 8901.337074] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 8901.337089] sd 5:0:0:0: [sdc] 16777215 512-byte logical blocks: (8.58
GB/7.99 GiB)
[ 8901.337205] sd 5:0:0:0: [sdc] Write Protect is off
[ 8901.337273] sd 5:0:0:0: [sdc] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 8901.337603] sdc:
[ 8901.339604] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 8906.325426] ata6: hard resetting link
[ 8907.070160] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8907.070315] ata6.00: model number mismatch 'Config Disk 0' !=
'External Disk 0'
[ 8907.070333] ata6: limiting SATA link speed to 1.5 Gbps
[ 8912.072673] ata6: hard resetting link
[ 8912.420149] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8912.420301] ata6.00: model number mismatch 'Config Disk 0' !=
'External Disk 0'
[ 8912.420316] ata6.00: disabled
[ 8917.420107] ata6: hard resetting link
[ 8917.780127] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8917.780857] ACPI Error: Attempt to CreateField of length zero
20090521 dsopcode-529
[ 8917.780873] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.RATA] (Node ffff88013ba324c0), AE_AML_OPERAND_VALUE
[ 8917.780996] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.PRT5._GTF] (Node ffff88013ba326a0), AE_AML_OPERAND_VALUE
[ 8917.781124] ata6.00: _GTF evaluation failed (AE 0x3004)
[ 8917.781136] ata6.00: ATA-7: External Disk 0, 1.1589, max UDMA/133
[ 8917.781143] ata6.00: 5860554336 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 8917.781869] ACPI Error: Attempt to CreateField of length zero
20090521 dsopcode-529
[ 8917.781883] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.RATA] (Node ffff88013ba324c0), AE_AML_OPERAND_VALUE
[ 8917.782004] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.PRT5._GTF] (Node ffff88013ba326a0), AE_AML_OPERAND_VALUE
[ 8917.782130] ata6.00: _GTF evaluation failed (AE 0x3004)
[ 8917.782168] ata6.00: configured for UDMA/133
[ 8917.782182] ata6: EH complete
[ 8917.782206] ata6.00: detaching (SCSI 5:0:0:0)
[ 8917.782811] sd 5:0:0:0: [sdc] Stopping disk
[ 8920.518523] scsi 5:0:0:0: Direct-Access ATA External Disk 0
1.15 PQ: 0 ANSI: 5
[ 8920.520478] sd 5:0:0:0: [sdc] 5860554336 512-byte logical blocks:
(3.00 TB/2.72 TiB)
[ 8920.520593] sd 5:0:0:0: [sdc] Write Protect is off
[ 8920.520660] sd 5:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 8920.520986] sdc:
[ 8920.524398] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 8924.295185] unknown partition table
[ 8924.295659] sd 5:0:0:0: [sdc] Attached SCSI disk
next reply other threads:[~2009-10-29 20:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-29 20:41 Peter Klotz [this message]
2009-10-29 23:59 ` Errors when powering on eSATA box Robert Hancock
2009-10-30 22:06 ` Peter Klotz
2009-11-09 9:09 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AE9FDE6.5040203@aon.at \
--to=peter.klotz@aon.at \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).