* Re: Kernel Bug in ATA or SMART area [not found] <4B72941A.7060704@gmx.de> @ 2010-02-11 20:21 ` Maciej Rutecki 2010-02-11 22:18 ` Axel Uhl 2010-02-12 2:32 ` Tejun Heo 1 sibling, 1 reply; 13+ messages in thread From: Maciej Rutecki @ 2010-02-11 20:21 UTC (permalink / raw) To: Axel Uhl, linux-ide; +Cc: linux-kernel (CCs added) Is older kernels work fine? Dnia środa, 10 lutego 2010 o 12:10:18 Axel Uhl napisał(a): > I get intermittent kernel exceptions, probably related to an issue with > the ATA or SMART code in the kernel / modules. I have a cron job that > every so many hours captures the disk temperatures. I "hdparm -y" my > disks when they are not used. It seems that when the cron job runs that > spins up the disks to access their temperature using smartctl, if during > this time certain other interactions happen, the kernel raises an > exception. > > The smartctl command I'm using is: > > /usr/sbin/smartctl -a $devfull >/var/local/snmp/smart-$dev.TMP > > Here is one such exception from the syslog: > > Feb 10 06:57:01 homemp3 /USR/SBIN/CRON[18271]: (root) CMD > (/etc/snmp/local-snmp-cronjob-spinup) > Feb 10 06:57:06 homemp3 vdr: [3293] connect from 127.0.0.1, port 59975 - > accepted > Feb 10 06:57:06 homemp3 vdr: [3293] closing SVDRP connection > Feb 10 06:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 > SErr 0x0 action 0x6 frozen > Feb 10 06:57:09 homemp3 kernel: ata5.00: failed command: SMART > Feb 10 06:57:09 homemp3 kernel: ata5.00: cmd > b0/da:00:00:4f:c2/00:00:00:00:00/00 > tag 0 > Feb 10 06:57:09 homemp3 kernel: res > 40/00:01:00:00:00/00:00:00:00:00/00 > Emask 0x4 (timeout) > Feb 10 06:57:09 homemp3 kernel: ata5.00: status: { DRDY } > Feb 10 06:57:10 homemp3 kernel: irq 10: nobody cared (try booting with > the "irqpoll" option) > Feb 10 06:57:10 homemp3 kernel: Pid: 17050, comm: hadam3p_um_6.14 Not > tainted 2.6.32.7 #1 > Feb 10 06:57:10 homemp3 kernel: Call Trace: > Feb 10 06:57:10 homemp3 kernel: [<c128a221>] ? printk+0x18/0x1a > Feb 10 06:57:10 homemp3 kernel: [<c103aaf8>] __report_bad_irq+0x27/0x85 > Feb 10 06:57:10 homemp3 kernel: [<c103ac9e>] note_interrupt+0x148/0x186 > Feb 10 06:57:10 homemp3 kernel: [<c103b292>] handle_level_irq+0x86/0xb1 > Feb 10 06:57:10 homemp3 kernel: [<c1004722>] handle_irq+0x1a/0x28 > Feb 10 06:57:10 homemp3 kernel: [<c100434c>] do_IRQ+0x33/0x80 > Feb 10 06:57:10 homemp3 kernel: [<c11d73fb>] ? pdc_interrupt+0x150/0x3a5 > Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 > Feb 10 06:57:10 homemp3 kernel: [<c101cd72>] ? __do_softirq+0x33/0xec > Feb 10 06:57:10 homemp3 kernel: [<c1039e00>] ? handle_IRQ_event+0x31/0xc1 > Feb 10 06:57:10 homemp3 kernel: [<c101ce55>] do_softirq+0x2a/0x2f > Feb 10 06:57:10 homemp3 kernel: [<c101cf34>] irq_exit+0x2a/0x2f > Feb 10 06:57:10 homemp3 kernel: [<c1004355>] do_IRQ+0x3c/0x80 > Feb 10 06:57:10 homemp3 kernel: [<c1003b81>] ? > do_device_not_available+0x0/0x48 > Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 > Feb 10 06:57:10 homemp3 kernel: handlers: > Feb 10 06:57:10 homemp3 kernel: [<c11d72ab>] (pdc_interrupt+0x0/0x3a5) > Feb 10 06:57:10 homemp3 kernel: [<c11d3504>] (ata_sff_interrupt+0x0/0xc4) > Feb 10 06:57:10 homemp3 kernel: [<f83a6767>] (azx_interrupt+0x0/0x11b > [snd_hda_intel]) > Feb 10 06:57:10 homemp3 kernel: [<f8106471>] (usb_hcd_irq+0x0/0x5e > [usbcore]) > Feb 10 06:57:10 homemp3 kernel: [<f8062bf9>] (e1000_intr+0x0/0xf2 [e1000]) > Feb 10 06:57:10 homemp3 kernel: Disabling IRQ #10 > Feb 10 06:57:10 homemp3 kernel: ata5: soft resetting link > Feb 10 06:57:11 homemp3 kernel: ata5.00: configured for UDMA/133 > Feb 10 06:57:11 homemp3 kernel: ata5: EH complete > > > I suppose the hadam3p_um_6.14 command is part of my BOINC installation, > doing a climate simulation. However, the problem has also occurred with > this program not running. > > Here's the output of scripts/ver_linux: > > If some fields are empty or look unusual you may have an old version. > Compare to the current minimal requirements in Documentation/Changes. > > Linux homemp3 2.6.32.7 #1 Sat Feb 6 10:50:05 CET 2010 i686 GNU/Linux > > Gnu C 4.3.2 > Gnu make 3.81 > binutils 2.18.0.20080103 > util-linux 2.13.1.1 > mount 2.13.1.1 > module-init-tools found > Linux C Library 2.7 > Dynamic linker (ldd) 2.7 > Procps 3.2.7 > Console-tools 0.2.3 > Sh-utils 6.10 > udev 125 > Modules Loaded ipv6 bsd_comp usb_storage ppp_deflate > zlib_deflate ppp_ge > neric slhc w83627hf hwmon_vid hwmon i2c_dev saa7134_alsa > snd_hda_codec_realtek tuner_simple tuner_types mt352 snd_hda_intel > saa7134_dvb snd_hda_codec videobuf_dvb snd_pcm_oss snd_mixer_oss > dvb_core snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event > 8250_pnp snd_seq 8250 serial_core snd_timer snd_seq_device > saa7134 ehci_hcd ir_common snd v4l2_common videodev v4l1_compat > soundcore snd_page_alloc videobuf_dma_sg videobuf_core tveeprom usbcore > via_rhine i2c_core e1000 > > > As a result of the exception, the system becomes very unresponsive. Any > sort of I/O seems to have very poor response time. Ping times in the > gigabit network suddenly take several tens of milliseconds. It seems > this may have to do with the IRQ10 being somehow affected, but I'm not > sure. > > /proc/version: > > Linux version 2.6.32.7 (root@homemp3) (gcc version 4.3.2 (Debian > 4.3.2-1.1) ) #1 Sat Feb 6 10:50:05 CET 2010 > > /proc/cpuinfo: > > processor : 0 > vendor_id : GenuineIntel > cpu family : 15 > model : 4 > model name : Intel(R) Celeron(R) CPU 2.80GHz > stepping : 9 > cpu MHz : 2799.930 > cache size : 256 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmovpat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm > constant_tsc pebs bts pni dtes64 monitor ds_cpl tm2 cid cx16 xtpr lahf_lm > bogomips : 5623.13 > clflush size : 64 > cache_alignment : 128 > address sizes : 36 bits physical, 48 bits virtual > power management: > > > Output of lcpsi -vvv: > > 00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge > Subsystem: ASRock Incorporation Device 0308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort+ >SERR- <PERR+ INTx- > Latency: 8, Cache Line Size: 32 bytes > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [80] AGP version 3.5 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64 > bit- FW- AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- > FW- Rate=<n > one> > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: agpgart-via > > 00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge > Subsystem: ASRock Incorporation Device 1308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge > Subsystem: ASRock Incorporation Device 2308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge > Subsystem: ASRock Incorporation Device 4308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller > (prog-if > 20 [IO(X)-APIC]) > Subsystem: ASRock Incorporation Device 5308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge > (prog-if 00 [ > Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fc700000-fe7fffff > Prefetchable memory behind bridge: cff00000-dfefffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge > Controller (p > rog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 00001000-00001fff > Memory behind bridge: fe800000-fe8fffff > Prefetchable memory behind bridge: 40000000-401fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > <64ns, L1 > unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupporte > d- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr+ TransPe > nd- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, > Latency L > 0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- > DLActive > - BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- > HotPlug+ Surpise > + > Slot # 10, PowerLimit 75.000000; Interlock- > NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- > HPIrq- L > inkChg- > Control: AttnInd Unknown, PwrInd Unknown, > Power- Interlo > ck- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- > PresDet- Interl > ock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- > PMEIntEna- CRSV > isible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [68] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot > +,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ > Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [140] Virtual Channel <?> > > 00:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet > Controll > er (rev 05) > Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 (63750ns min), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at feba0000 (32-bit, non-prefetchable) > [size=128K] Region 1: Memory at feb80000 (32-bit, non-prefetchable) > [size=128K] Region 2: I/O ports at cc00 [size=64] > Expansion ROM at feb60000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot > +,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=512 OST=1 > Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple > DMMRBC=20 > 48 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- > Kernel driver in use: e1000 > Kernel modules: e1000 > > 00:0a.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA > 300 TX4 > ) (rev 02) > Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at d400 [size=128] > Region 2: I/O ports at c800 [size=256] > Region 3: Memory at febfe000 (32-bit, non-prefetchable) [size=4K] > Region 4: Memory at febc0000 (32-bit, non-prefetchable) > [size=128K] Expansion ROM at febe0000 [disabled] [size=32K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: sata_promise > > 00:0c.0 Multimedia controller: Philips Semiconductors > SAA7131/SAA7133/SAA7135 Vi > deo Broadcast Decoder (rev d1) > Subsystem: Avermedia Technologies Inc Device 2c05 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: saa7134 > Kernel modules: saa7134 > > 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port > Controller (re > v 80) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: ASRock Incorporation Device 0591 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 > Interrupt: pin B routed to IRQ 10 > Region 0: I/O ports at e000 [size=8] > Region 1: I/O ports at dc00 [size=4] > Region 2: I/O ports at d880 [size=8] > Region 3: I/O ports at d800 [size=4] > Region 4: I/O ports at d480 [size=16] > Region 5: I/O ports at d000 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: sata_via > > 00:0f.1 IDE interface: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/ > C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP]) > Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 > Region 0: [virtual] Memory at 000001f0 (32-bit, > non-prefetchable) [disab > led] [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, > non-prefetchable) [disab > led] [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, > non-prefetchable) [disab > led] [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, > non-prefetchable) [disab > led] [size=1] > Region 4: I/O ports at fc00 [size=16] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: VIA_IDE > > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > (rev a0) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation K7VT6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 4: I/O ports at e080 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > (rev a0) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation K7VT6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 10 > Region 4: I/O ports at e400 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > (rev a0) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation K7VT6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 32 bytes > Interrupt: pin C routed to IRQ 10 > Region 4: I/O ports at e480 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > (rev a0) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation K7VT6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 32 bytes > Interrupt: pin D routed to IRQ 10 > Region 4: I/O ports at ec00 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if > 20 [EHC > I]) > Subsystem: ASRock Incorporation K7VT6 motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 128 bytes > Interrupt: pin C routed to IRQ 10 > Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge > Subsystem: ASRock Incorporation Device 3337 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller > Subsystem: VIA Technologies, Inc. Device 337e > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort+ >SERR- <PERR+ INTx- > Latency: 32 > Capabilities: [58] HyperTransport: Interrupt Discovery and > Configuration > > > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] > (rev 7c) > Subsystem: ASRock Incorporation K7VT6 motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at e800 [size=256] > Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot > +,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: via-rhine > Kernel modules: via-rhine > > 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+ > > 01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 > MX200] ( > rev b2) (prog-if 00 [VGA controller]) > Subsystem: ABIT Computer Corp. Device 6107 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium > > >TAbort- <TAbort > > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Expansion ROM at fe7f0000 [disabled] [size=64K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- > HTrans- 64 > bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- > FW- Rate=<n > one> > Kernel modules: nvidiafb > > 80:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA > High De > finition Audio Controller) (rev 10) > Subsystem: ASRock Incorporation Device 0888 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3ho > t+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v1) Root Complex Integrated > Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 > <1us > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupporte > d- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr+ TransPe > nd+ > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, > Latency > L0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- > DLActive > - BWMgmt- ABWMgmt- > Capabilities: [100] #1106 > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel > > > /proc/ioports: > > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-0060 : keyboard > 0064-0064 : keyboard > 0070-0077 : rtc > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : 0000:00:0f.1 > 0170-0177 : via82cxxx > 01f0-01f7 : 0000:00:0f.1 > 01f0-01f7 : via82cxxx > 0295-0296 : w83627hf > 0295-0296 : pnp 00:09 > 0295-0296 : w83627hf > 02f8-02ff : serial > 0376-0376 : 0000:00:0f.1 > 0376-0376 : via82cxxx > 03c0-03df : vga+ > 03e0-03e7 : pnp 00:09 > 03f2-03f2 : floppy > 03f4-03f5 : floppy > 03f6-03f6 : 0000:00:0f.1 > 03f6-03f6 : via82cxxx > 03f7-03f7 : floppy > 03f8-03ff : serial > 0400-041f : pnp 00:09 > 04d0-04d1 : pnp 00:09 > 0800-087f : pnp 00:09 > 0800-0803 : ACPI PM1a_EVT_BLK > 0804-0805 : ACPI PM1a_CNT_BLK > 0808-080b : ACPI PM_TMR > 0810-0815 : ACPI CPU throttle > 0820-0823 : ACPI GPE0_BLK > 0cf8-0cff : PCI conf1 > 1000-1fff : PCI Bus 0000:02 > c800-c8ff : 0000:00:0a.0 > cc00-cc3f : 0000:00:09.0 > cc00-cc3f : e1000 > d000-d0ff : 0000:00:0f.0 > d000-d0ff : sata_via > d400-d47f : 0000:00:0a.0 > d480-d48f : 0000:00:0f.0 > d480-d48f : sata_via > d800-d803 : 0000:00:0f.0 > d800-d803 : sata_via > d880-d887 : 0000:00:0f.0 > d880-d887 : sata_via > dc00-dc03 : 0000:00:0f.0 > dc00-dc03 : sata_via > e000-e007 : 0000:00:0f.0 > e000-e007 : sata_via > e080-e09f : 0000:00:10.0 > e400-e41f : 0000:00:10.1 > e480-e49f : 0000:00:10.2 > e800-e8ff : 0000:00:12.0 > e800-e8ff : via-rhine > ec00-ec1f : 0000:00:10.3 > fc00-fc0f : 0000:00:0f.1 > fc00-fc0f : via82cxxx > > /proc/iomem: > > 00000000-0000ffff : reserved > 00010000-0009fbff : System RAM > 0009fc00-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000cc7ff : Video ROM > 000cc800-000d17ff : Adapter ROM > 000d1800-000d27ff : Adapter ROM > 000e6000-000fffff : reserved > 000f0000-000fffff : System ROM > 00100000-3ffaffff : System RAM > 01000000-0128c677 : Kernel code > 0128c678-0138f533 : Kernel data > 013e0000-014131ff : Kernel bss > 3ffb0000-3ffbffff : ACPI Tables > 3ffc0000-3ffeffff : ACPI Non-volatile Storage > 3fff0000-3fffffff : reserved > 40000000-401fffff : PCI Bus 0000:02 > cff00000-dfefffff : PCI Bus 0000:01 > d0000000-d7ffffff : 0000:01:00.0 > e0000000-efffffff : PCI MMCONFIG 0 [00-ff] > e0000000-efffffff : pnp 00:0e > f8000000-fbffffff : 0000:00:00.0 > fc700000-fe7fffff : PCI Bus 0000:01 > fd000000-fdffffff : 0000:01:00.0 > fe7f0000-fe7fffff : 0000:01:00.0 > fe800000-fe8fffff : PCI Bus 0000:02 > fe9fc000-fe9fffff : 0000:80:01.0 > fe9fc000-fe9fffff : pnp 00:09 > fe9fc000-fe9fffff : ICH HD audio > feb60000-feb7ffff : 0000:00:09.0 > feb80000-feb9ffff : 0000:00:09.0 > feb80000-feb9ffff : e1000 > feba0000-febbffff : 0000:00:09.0 > feba0000-febbffff : e1000 > febc0000-febdffff : 0000:00:0a.0 > febe0000-febe7fff : 0000:00:0a.0 > febfe000-febfefff : 0000:00:0a.0 > febfe000-febfefff : sata_promise > febff000-febff7ff : 0000:00:0c.0 > febff000-febff7ff : saa7133[0] > febff800-febff8ff : 0000:00:10.4 > febff800-febff8ff : ehci_hcd > febffc00-febffcff : 0000:00:12.0 > febffc00-febffcff : via-rhine > fec00000-fec00fff : pnp 00:0a > fee00000-fee00fff : reserved > fee00000-fee00fff : pnp 00:0a > ff780000-ffffffff : reserved > ffb80000-ffbfffff : pnp 00:09 > fff80000-ffffffff : pnp 00:0f > > /proc/scsi/scsi: > > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: ST31500341AS Rev: CC1H > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi4 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: ST3500630AS Rev: 3.AA > Type: Direct-Access ANSI SCSI revision: 05 > > > > Thanks for any hints and best regards, > -- Axel > -- Maciej Rutecki http://www.maciek.unixy.pl ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-11 20:21 ` Kernel Bug in ATA or SMART area Maciej Rutecki @ 2010-02-11 22:18 ` Axel Uhl 0 siblings, 0 replies; 13+ messages in thread From: Axel Uhl @ 2010-02-11 22:18 UTC (permalink / raw) To: maciej.rutecki; +Cc: linux-ide, linux-kernel [-- Attachment #1: Type: text/plain, Size: 34585 bytes --] I had the same problem on a 2.6.28. Best, -- Axel Maciej Rutecki wrote: > (CCs added) > > Is older kernels work fine? > > Dnia środa, 10 lutego 2010 o 12:10:18 Axel Uhl napisał(a): >> I get intermittent kernel exceptions, probably related to an issue with >> the ATA or SMART code in the kernel / modules. I have a cron job that >> every so many hours captures the disk temperatures. I "hdparm -y" my >> disks when they are not used. It seems that when the cron job runs that >> spins up the disks to access their temperature using smartctl, if during >> this time certain other interactions happen, the kernel raises an >> exception. >> >> The smartctl command I'm using is: >> >> /usr/sbin/smartctl -a $devfull >/var/local/snmp/smart-$dev.TMP >> >> Here is one such exception from the syslog: >> >> Feb 10 06:57:01 homemp3 /USR/SBIN/CRON[18271]: (root) CMD >> (/etc/snmp/local-snmp-cronjob-spinup) >> Feb 10 06:57:06 homemp3 vdr: [3293] connect from 127.0.0.1, port 59975 - >> accepted >> Feb 10 06:57:06 homemp3 vdr: [3293] closing SVDRP connection >> Feb 10 06:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 >> SErr 0x0 action 0x6 frozen >> Feb 10 06:57:09 homemp3 kernel: ata5.00: failed command: SMART >> Feb 10 06:57:09 homemp3 kernel: ata5.00: cmd >> b0/da:00:00:4f:c2/00:00:00:00:00/00 >> tag 0 >> Feb 10 06:57:09 homemp3 kernel: res >> 40/00:01:00:00:00/00:00:00:00:00/00 >> Emask 0x4 (timeout) >> Feb 10 06:57:09 homemp3 kernel: ata5.00: status: { DRDY } >> Feb 10 06:57:10 homemp3 kernel: irq 10: nobody cared (try booting with >> the "irqpoll" option) >> Feb 10 06:57:10 homemp3 kernel: Pid: 17050, comm: hadam3p_um_6.14 Not >> tainted 2.6.32.7 #1 >> Feb 10 06:57:10 homemp3 kernel: Call Trace: >> Feb 10 06:57:10 homemp3 kernel: [<c128a221>] ? printk+0x18/0x1a >> Feb 10 06:57:10 homemp3 kernel: [<c103aaf8>] __report_bad_irq+0x27/0x85 >> Feb 10 06:57:10 homemp3 kernel: [<c103ac9e>] note_interrupt+0x148/0x186 >> Feb 10 06:57:10 homemp3 kernel: [<c103b292>] handle_level_irq+0x86/0xb1 >> Feb 10 06:57:10 homemp3 kernel: [<c1004722>] handle_irq+0x1a/0x28 >> Feb 10 06:57:10 homemp3 kernel: [<c100434c>] do_IRQ+0x33/0x80 >> Feb 10 06:57:10 homemp3 kernel: [<c11d73fb>] ? pdc_interrupt+0x150/0x3a5 >> Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 >> Feb 10 06:57:10 homemp3 kernel: [<c101cd72>] ? __do_softirq+0x33/0xec >> Feb 10 06:57:10 homemp3 kernel: [<c1039e00>] ? handle_IRQ_event+0x31/0xc1 >> Feb 10 06:57:10 homemp3 kernel: [<c101ce55>] do_softirq+0x2a/0x2f >> Feb 10 06:57:10 homemp3 kernel: [<c101cf34>] irq_exit+0x2a/0x2f >> Feb 10 06:57:10 homemp3 kernel: [<c1004355>] do_IRQ+0x3c/0x80 >> Feb 10 06:57:10 homemp3 kernel: [<c1003b81>] ? >> do_device_not_available+0x0/0x48 >> Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 >> Feb 10 06:57:10 homemp3 kernel: handlers: >> Feb 10 06:57:10 homemp3 kernel: [<c11d72ab>] (pdc_interrupt+0x0/0x3a5) >> Feb 10 06:57:10 homemp3 kernel: [<c11d3504>] (ata_sff_interrupt+0x0/0xc4) >> Feb 10 06:57:10 homemp3 kernel: [<f83a6767>] (azx_interrupt+0x0/0x11b >> [snd_hda_intel]) >> Feb 10 06:57:10 homemp3 kernel: [<f8106471>] (usb_hcd_irq+0x0/0x5e >> [usbcore]) >> Feb 10 06:57:10 homemp3 kernel: [<f8062bf9>] (e1000_intr+0x0/0xf2 [e1000]) >> Feb 10 06:57:10 homemp3 kernel: Disabling IRQ #10 >> Feb 10 06:57:10 homemp3 kernel: ata5: soft resetting link >> Feb 10 06:57:11 homemp3 kernel: ata5.00: configured for UDMA/133 >> Feb 10 06:57:11 homemp3 kernel: ata5: EH complete >> >> >> I suppose the hadam3p_um_6.14 command is part of my BOINC installation, >> doing a climate simulation. However, the problem has also occurred with >> this program not running. >> >> Here's the output of scripts/ver_linux: >> >> If some fields are empty or look unusual you may have an old version. >> Compare to the current minimal requirements in Documentation/Changes. >> >> Linux homemp3 2.6.32.7 #1 Sat Feb 6 10:50:05 CET 2010 i686 GNU/Linux >> >> Gnu C 4.3.2 >> Gnu make 3.81 >> binutils 2.18.0.20080103 >> util-linux 2.13.1.1 >> mount 2.13.1.1 >> module-init-tools found >> Linux C Library 2.7 >> Dynamic linker (ldd) 2.7 >> Procps 3.2.7 >> Console-tools 0.2.3 >> Sh-utils 6.10 >> udev 125 >> Modules Loaded ipv6 bsd_comp usb_storage ppp_deflate >> zlib_deflate ppp_ge >> neric slhc w83627hf hwmon_vid hwmon i2c_dev saa7134_alsa >> snd_hda_codec_realtek tuner_simple tuner_types mt352 snd_hda_intel >> saa7134_dvb snd_hda_codec videobuf_dvb snd_pcm_oss snd_mixer_oss >> dvb_core snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event >> 8250_pnp snd_seq 8250 serial_core snd_timer snd_seq_device >> saa7134 ehci_hcd ir_common snd v4l2_common videodev v4l1_compat >> soundcore snd_page_alloc videobuf_dma_sg videobuf_core tveeprom usbcore >> via_rhine i2c_core e1000 >> >> >> As a result of the exception, the system becomes very unresponsive. Any >> sort of I/O seems to have very poor response time. Ping times in the >> gigabit network suddenly take several tens of milliseconds. It seems >> this may have to do with the IRQ10 being somehow affected, but I'm not >> sure. >> >> /proc/version: >> >> Linux version 2.6.32.7 (root@homemp3) (gcc version 4.3.2 (Debian >> 4.3.2-1.1) ) #1 Sat Feb 6 10:50:05 CET 2010 >> >> /proc/cpuinfo: >> >> processor : 0 >> vendor_id : GenuineIntel >> cpu family : 15 >> model : 4 >> model name : Intel(R) Celeron(R) CPU 2.80GHz >> stepping : 9 >> cpu MHz : 2799.930 >> cache size : 256 KB >> fdiv_bug : no >> hlt_bug : no >> f00f_bug : no >> coma_bug : no >> fpu : yes >> fpu_exception : yes >> cpuid level : 5 >> wp : yes >> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >> mca cmovpat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm >> constant_tsc pebs bts pni dtes64 monitor ds_cpl tm2 cid cx16 xtpr lahf_lm >> bogomips : 5623.13 >> clflush size : 64 >> cache_alignment : 128 >> address sizes : 36 bits physical, 48 bits virtual >> power management: >> >> >> Output of lcpsi -vvv: >> >> 00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge >> Subsystem: ASRock Incorporation Device 0308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort+ >SERR- <PERR+ INTx- >> Latency: 8, Cache Line Size: 32 bytes >> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [80] AGP version 3.5 >> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- >> HTrans- 64 >> bit- FW- AGP3- Rate=x1,x2,x4 >> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- >> FW- Rate=<n >> one> >> Capabilities: [50] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: agpgart-via >> >> 00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge >> Subsystem: ASRock Incorporation Device 1308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge >> Subsystem: ASRock Incorporation Device 2308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> >> 00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge >> Subsystem: ASRock Incorporation Device 4308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller >> (prog-if >> 20 [IO(X)-APIC]) >> Subsystem: ASRock Incorporation Device 5308 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> >> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge >> (prog-if 00 [ >> Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 >> I/O behind bridge: 0000f000-00000fff >> Memory behind bridge: fc700000-fe7fffff >> Prefetchable memory behind bridge: cff00000-dfefffff >> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- <SERR- <PERR- >> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: [70] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge >> Controller (p >> rog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >> I/O behind bridge: 00001000-00001fff >> Memory behind bridge: fe800000-fe8fffff >> Prefetchable memory behind bridge: 40000000-401fffff >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort- <SERR- <PERR- >> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >> <64ns, L1 >> unlimited >> ExtTag- RBE- FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >> Unsupporte >> d- >> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- >> MaxPayload 128 bytes, MaxReadReq 128 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- >> AuxPwr+ TransPe >> nd- >> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, >> Latency L >> 0 <64ns, L1 <1us >> ClockPM- Suprise- LLActRep+ BwNot- >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >> CommClk- >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- >> DLActive >> - BWMgmt- ABWMgmt- >> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- >> HotPlug+ Surpise >> + >> Slot # 10, PowerLimit 75.000000; Interlock- >> NoCompl- >> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >> HPIrq- L >> inkChg- >> Control: AttnInd Unknown, PwrInd Unknown, >> Power- Interlo >> ck- >> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- >> PresDet- Interl >> ock- >> Changed: MRL- PresDet- LinkState- >> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- >> PMEIntEna- CRSV >> isible- >> RootCap: CRSVisible- >> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >> Capabilities: [68] Power Management version 2 >> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >> PME(D0+,D1-,D2-,D3hot >> +,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ >> Queue=0/0 >> Enable- >> Address: 0000000000000000 Data: 0000 >> Masking: 00000000 Pending: 00000000 >> Capabilities: [100] Advanced Error Reporting <?> >> Capabilities: [140] Virtual Channel <?> >> >> 00:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet >> Controll >> er (rev 05) >> Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 (63750ns min), Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: Memory at feba0000 (32-bit, non-prefetchable) >> [size=128K] Region 1: Memory at feb80000 (32-bit, non-prefetchable) >> [size=128K] Region 2: I/O ports at cc00 [size=64] >> Expansion ROM at feb60000 [disabled] [size=128K] >> Capabilities: [dc] Power Management version 2 >> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >> PME(D0+,D1-,D2-,D3hot >> +,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=1 PME- >> Capabilities: [e4] PCI-X non-bridge device >> Command: DPERE- ERO+ RBC=512 OST=1 >> Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple >> DMMRBC=20 >> 48 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- >> Kernel driver in use: e1000 >> Kernel modules: e1000 >> >> 00:0a.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA >> 300 TX4 >> ) (rev 02) >> Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: I/O ports at d400 [size=128] >> Region 2: I/O ports at c800 [size=256] >> Region 3: Memory at febfe000 (32-bit, non-prefetchable) [size=4K] >> Region 4: Memory at febc0000 (32-bit, non-prefetchable) >> [size=128K] Expansion ROM at febe0000 [disabled] [size=32K] >> Capabilities: [60] Power Management version 2 >> Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: sata_promise >> >> 00:0c.0 Multimedia controller: Philips Semiconductors >> SAA7131/SAA7133/SAA7135 Vi >> deo Broadcast Decoder (rev d1) >> Subsystem: Avermedia Technologies Inc Device 2c05 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 >> Interrupt: pin A routed to IRQ 11 >> Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K] >> Capabilities: [40] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: saa7134 >> Kernel modules: saa7134 >> >> 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port >> Controller (re >> v 80) (prog-if 8f [Master SecP SecO PriP PriO]) >> Subsystem: ASRock Incorporation Device 0591 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 >> Interrupt: pin B routed to IRQ 10 >> Region 0: I/O ports at e000 [size=8] >> Region 1: I/O ports at dc00 [size=4] >> Region 2: I/O ports at d880 [size=8] >> Region 3: I/O ports at d800 [size=4] >> Region 4: I/O ports at d480 [size=16] >> Region 5: I/O ports at d000 [size=256] >> Capabilities: [c0] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: sata_via >> >> 00:0f.1 IDE interface: VIA Technologies, Inc. >> VT82C586A/B/VT82C686/A/B/VT823x/A/ >> C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP]) >> Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 >> Region 0: [virtual] Memory at 000001f0 (32-bit, >> non-prefetchable) [disab >> led] [size=8] >> Region 1: [virtual] Memory at 000003f0 (type 3, >> non-prefetchable) [disab >> led] [size=1] >> Region 2: [virtual] Memory at 00000170 (32-bit, >> non-prefetchable) [disab >> led] [size=8] >> Region 3: [virtual] Memory at 00000370 (type 3, >> non-prefetchable) [disab >> led] [size=1] >> Region 4: I/O ports at fc00 [size=16] >> Capabilities: [c0] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: VIA_IDE >> >> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller >> (rev a0) (prog-if 00 [UHCI]) >> Subsystem: ASRock Incorporation K7VT6 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 11 >> Region 4: I/O ports at e080 [size=32] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller >> (rev a0) (prog-if 00 [UHCI]) >> Subsystem: ASRock Incorporation K7VT6 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 32 bytes >> Interrupt: pin B routed to IRQ 10 >> Region 4: I/O ports at e400 [size=32] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller >> (rev a0) (prog-if 00 [UHCI]) >> Subsystem: ASRock Incorporation K7VT6 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 32 bytes >> Interrupt: pin C routed to IRQ 10 >> Region 4: I/O ports at e480 [size=32] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller >> (rev a0) (prog-if 00 [UHCI]) >> Subsystem: ASRock Incorporation K7VT6 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 32 bytes >> Interrupt: pin D routed to IRQ 10 >> Region 4: I/O ports at ec00 [size=32] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if >> 20 [EHC >> I]) >> Subsystem: ASRock Incorporation K7VT6 motherboard >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 128 bytes >> Interrupt: pin C routed to IRQ 10 >> Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256] >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0+,D1+,D2+,D3h >> ot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: ehci_hcd >> Kernel modules: ehci-hcd >> >> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge >> Subsystem: ASRock Incorporation Device 3337 >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Capabilities: [c0] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller >> Subsystem: VIA Technologies, Inc. Device 337e >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort+ >SERR- <PERR+ INTx- >> Latency: 32 >> Capabilities: [58] HyperTransport: Interrupt Discovery and >> Configuration >> >> >> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] >> (rev 7c) >> Subsystem: ASRock Incorporation K7VT6 motherboard >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 11 >> Region 0: I/O ports at e800 [size=256] >> Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] >> Capabilities: [40] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0+,D1+,D2+,D3hot >> +,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Kernel driver in use: via-rhine >> Kernel modules: via-rhine >> >> 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort+ >SERR- <PERR- INTx- >> Latency: 0 >> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+ >> >> 01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 >> MX200] ( >> rev b2) (prog-if 00 [VGA controller]) >> Subsystem: ABIT Computer Corp. Device 6107 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> >> >TAbort- <TAbort >> >> - <MAbort- >SERR- <PERR- INTx- >> Latency: 32 (1250ns min, 250ns max) >> Interrupt: pin A routed to IRQ 11 >> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] >> Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] >> Expansion ROM at fe7f0000 [disabled] [size=64K] >> Capabilities: [60] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot >> -,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [44] AGP version 2.0 >> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- >> HTrans- 64 >> bit- FW+ AGP3- Rate=x1,x2,x4 >> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- >> FW- Rate=<n >> one> >> Kernel modules: nvidiafb >> >> 80:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA >> High De >> finition Audio Controller) (rev 10) >> Subsystem: ASRock Incorporation Device 0888 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Step >> ping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: [50] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA >> PME(D0+,D1-,D2-,D3ho >> t+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ >> Queue=0/0 >> Enable- >> Address: 0000000000000000 Data: 0000 >> Capabilities: [70] Express (v1) Root Complex Integrated >> Endpoint, MSI 00 >> >> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s >> <64ns, L1 >> <1us >> ExtTag- RBE- FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >> Unsupporte >> d- >> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- >> MaxPayload 128 bytes, MaxReadReq 128 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- >> AuxPwr+ TransPe >> nd+ >> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, >> Latency >> L0 <64ns, L1 <1us >> ClockPM- Suprise- LLActRep- BwNot- >> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- >> DLActive >> - BWMgmt- ABWMgmt- >> Capabilities: [100] #1106 >> Kernel driver in use: HDA Intel >> Kernel modules: snd-hda-intel >> >> >> /proc/ioports: >> >> 0000-001f : dma1 >> 0020-0021 : pic1 >> 0040-0043 : timer0 >> 0050-0053 : timer1 >> 0060-0060 : keyboard >> 0064-0064 : keyboard >> 0070-0077 : rtc >> 0080-008f : dma page reg >> 00a0-00a1 : pic2 >> 00c0-00df : dma2 >> 00f0-00ff : fpu >> 0170-0177 : 0000:00:0f.1 >> 0170-0177 : via82cxxx >> 01f0-01f7 : 0000:00:0f.1 >> 01f0-01f7 : via82cxxx >> 0295-0296 : w83627hf >> 0295-0296 : pnp 00:09 >> 0295-0296 : w83627hf >> 02f8-02ff : serial >> 0376-0376 : 0000:00:0f.1 >> 0376-0376 : via82cxxx >> 03c0-03df : vga+ >> 03e0-03e7 : pnp 00:09 >> 03f2-03f2 : floppy >> 03f4-03f5 : floppy >> 03f6-03f6 : 0000:00:0f.1 >> 03f6-03f6 : via82cxxx >> 03f7-03f7 : floppy >> 03f8-03ff : serial >> 0400-041f : pnp 00:09 >> 04d0-04d1 : pnp 00:09 >> 0800-087f : pnp 00:09 >> 0800-0803 : ACPI PM1a_EVT_BLK >> 0804-0805 : ACPI PM1a_CNT_BLK >> 0808-080b : ACPI PM_TMR >> 0810-0815 : ACPI CPU throttle >> 0820-0823 : ACPI GPE0_BLK >> 0cf8-0cff : PCI conf1 >> 1000-1fff : PCI Bus 0000:02 >> c800-c8ff : 0000:00:0a.0 >> cc00-cc3f : 0000:00:09.0 >> cc00-cc3f : e1000 >> d000-d0ff : 0000:00:0f.0 >> d000-d0ff : sata_via >> d400-d47f : 0000:00:0a.0 >> d480-d48f : 0000:00:0f.0 >> d480-d48f : sata_via >> d800-d803 : 0000:00:0f.0 >> d800-d803 : sata_via >> d880-d887 : 0000:00:0f.0 >> d880-d887 : sata_via >> dc00-dc03 : 0000:00:0f.0 >> dc00-dc03 : sata_via >> e000-e007 : 0000:00:0f.0 >> e000-e007 : sata_via >> e080-e09f : 0000:00:10.0 >> e400-e41f : 0000:00:10.1 >> e480-e49f : 0000:00:10.2 >> e800-e8ff : 0000:00:12.0 >> e800-e8ff : via-rhine >> ec00-ec1f : 0000:00:10.3 >> fc00-fc0f : 0000:00:0f.1 >> fc00-fc0f : via82cxxx >> >> /proc/iomem: >> >> 00000000-0000ffff : reserved >> 00010000-0009fbff : System RAM >> 0009fc00-0009ffff : reserved >> 000a0000-000bffff : Video RAM area >> 000c0000-000cc7ff : Video ROM >> 000cc800-000d17ff : Adapter ROM >> 000d1800-000d27ff : Adapter ROM >> 000e6000-000fffff : reserved >> 000f0000-000fffff : System ROM >> 00100000-3ffaffff : System RAM >> 01000000-0128c677 : Kernel code >> 0128c678-0138f533 : Kernel data >> 013e0000-014131ff : Kernel bss >> 3ffb0000-3ffbffff : ACPI Tables >> 3ffc0000-3ffeffff : ACPI Non-volatile Storage >> 3fff0000-3fffffff : reserved >> 40000000-401fffff : PCI Bus 0000:02 >> cff00000-dfefffff : PCI Bus 0000:01 >> d0000000-d7ffffff : 0000:01:00.0 >> e0000000-efffffff : PCI MMCONFIG 0 [00-ff] >> e0000000-efffffff : pnp 00:0e >> f8000000-fbffffff : 0000:00:00.0 >> fc700000-fe7fffff : PCI Bus 0000:01 >> fd000000-fdffffff : 0000:01:00.0 >> fe7f0000-fe7fffff : 0000:01:00.0 >> fe800000-fe8fffff : PCI Bus 0000:02 >> fe9fc000-fe9fffff : 0000:80:01.0 >> fe9fc000-fe9fffff : pnp 00:09 >> fe9fc000-fe9fffff : ICH HD audio >> feb60000-feb7ffff : 0000:00:09.0 >> feb80000-feb9ffff : 0000:00:09.0 >> feb80000-feb9ffff : e1000 >> feba0000-febbffff : 0000:00:09.0 >> feba0000-febbffff : e1000 >> febc0000-febdffff : 0000:00:0a.0 >> febe0000-febe7fff : 0000:00:0a.0 >> febfe000-febfefff : 0000:00:0a.0 >> febfe000-febfefff : sata_promise >> febff000-febff7ff : 0000:00:0c.0 >> febff000-febff7ff : saa7133[0] >> febff800-febff8ff : 0000:00:10.4 >> febff800-febff8ff : ehci_hcd >> febffc00-febffcff : 0000:00:12.0 >> febffc00-febffcff : via-rhine >> fec00000-fec00fff : pnp 00:0a >> fee00000-fee00fff : reserved >> fee00000-fee00fff : pnp 00:0a >> ff780000-ffffffff : reserved >> ffb80000-ffbfffff : pnp 00:09 >> fff80000-ffffffff : pnp 00:0f >> >> /proc/scsi/scsi: >> >> Host: scsi0 Channel: 00 Id: 00 Lun: 00 >> Vendor: ATA Model: ST31500341AS Rev: CC1H >> Type: Direct-Access ANSI SCSI revision: 05 >> Host: scsi4 Channel: 00 Id: 00 Lun: 00 >> Vendor: ATA Model: ST3500630AS Rev: 3.AA >> Type: Direct-Access ANSI SCSI revision: 05 >> >> >> >> Thanks for any hints and best regards, >> -- Axel >> > -- Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 2124 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area [not found] <4B72941A.7060704@gmx.de> 2010-02-11 20:21 ` Kernel Bug in ATA or SMART area Maciej Rutecki @ 2010-02-12 2:32 ` Tejun Heo [not found] ` <4B74F263.1060709@gmx.de> 1 sibling, 1 reply; 13+ messages in thread From: Tejun Heo @ 2010-02-12 2:32 UTC (permalink / raw) To: Axel Uhl; +Cc: linux-kernel, linux-ide (cc'ing linux-ide and quoting whole body) On 02/10/2010 08:10 PM, Axel Uhl wrote: > I get intermittent kernel exceptions, probably related to an issue with > the ATA or SMART code in the kernel / modules. I have a cron job that > every so many hours captures the disk temperatures. I "hdparm -y" my > disks when they are not used. It seems that when the cron job runs that > spins up the disks to access their temperature using smartctl, if during > this time certain other interactions happen, the kernel raises an > exception. > > The smartctl command I'm using is: > > /usr/sbin/smartctl -a $devfull >/var/local/snmp/smart-$dev.TMP > > Here is one such exception from the syslog: > > Feb 10 06:57:01 homemp3 /USR/SBIN/CRON[18271]: (root) CMD > (/etc/snmp/local-snmp-cronjob-spinup) > Feb 10 06:57:06 homemp3 vdr: [3293] connect from 127.0.0.1, port 59975 - accepted > Feb 10 06:57:06 homemp3 vdr: [3293] closing SVDRP connection > Feb 10 06:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen > Feb 10 06:57:09 homemp3 kernel: ata5.00: failed command: SMART > Feb 10 06:57:09 homemp3 kernel: ata5.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 > Feb 10 06:57:09 homemp3 kernel: res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > Feb 10 06:57:09 homemp3 kernel: ata5.00: status: { DRDY } > Feb 10 06:57:10 homemp3 kernel: irq 10: nobody cared (try booting with the "irqpoll" option) > Feb 10 06:57:10 homemp3 kernel: Pid: 17050, comm: hadam3p_um_6.14 Not tainted 2.6.32.7 #1 > Feb 10 06:57:10 homemp3 kernel: Call Trace: > Feb 10 06:57:10 homemp3 kernel: [<c128a221>] ? printk+0x18/0x1a > Feb 10 06:57:10 homemp3 kernel: [<c103aaf8>] __report_bad_irq+0x27/0x85 > Feb 10 06:57:10 homemp3 kernel: [<c103ac9e>] note_interrupt+0x148/0x186 > Feb 10 06:57:10 homemp3 kernel: [<c103b292>] handle_level_irq+0x86/0xb1 > Feb 10 06:57:10 homemp3 kernel: [<c1004722>] handle_irq+0x1a/0x28 > Feb 10 06:57:10 homemp3 kernel: [<c100434c>] do_IRQ+0x33/0x80 > Feb 10 06:57:10 homemp3 kernel: [<c11d73fb>] ? pdc_interrupt+0x150/0x3a5 > Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 > Feb 10 06:57:10 homemp3 kernel: [<c101cd72>] ? __do_softirq+0x33/0xec > Feb 10 06:57:10 homemp3 kernel: [<c1039e00>] ? handle_IRQ_event+0x31/0xc1 > Feb 10 06:57:10 homemp3 kernel: [<c101ce55>] do_softirq+0x2a/0x2f > Feb 10 06:57:10 homemp3 kernel: [<c101cf34>] irq_exit+0x2a/0x2f > Feb 10 06:57:10 homemp3 kernel: [<c1004355>] do_IRQ+0x3c/0x80 > Feb 10 06:57:10 homemp3 kernel: [<c1003b81>] ? do_device_not_available+0x0/0x48 > Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 > Feb 10 06:57:10 homemp3 kernel: handlers: > Feb 10 06:57:10 homemp3 kernel: [<c11d72ab>] (pdc_interrupt+0x0/0x3a5) > Feb 10 06:57:10 homemp3 kernel: [<c11d3504>] (ata_sff_interrupt+0x0/0xc4) > Feb 10 06:57:10 homemp3 kernel: [<f83a6767>] (azx_interrupt+0x0/0x11b [snd_hda_intel]) > Feb 10 06:57:10 homemp3 kernel: [<f8106471>] (usb_hcd_irq+0x0/0x5e [usbcore]) > Feb 10 06:57:10 homemp3 kernel: [<f8062bf9>] (e1000_intr+0x0/0xf2 [e1000]) > Feb 10 06:57:10 homemp3 kernel: Disabling IRQ #10 This is one crowded IRQ line. Two ATA controllers, sound card, USB host and NIC on the same IRQ? Does the ATA timeout always occur on the command b0? > Feb 10 06:57:10 homemp3 kernel: ata5: soft resetting link > Feb 10 06:57:11 homemp3 kernel: ata5.00: configured for UDMA/133 > Feb 10 06:57:11 homemp3 kernel: ata5: EH complete > > > I suppose the hadam3p_um_6.14 command is part of my BOINC installation, > doing a climate simulation. However, the problem has also occurred with > this program not running. > > Here's the output of scripts/ver_linux: > > If some fields are empty or look unusual you may have an old version. > Compare to the current minimal requirements in Documentation/Changes. > > Linux homemp3 2.6.32.7 #1 Sat Feb 6 10:50:05 CET 2010 i686 GNU/Linux > > Gnu C 4.3.2 > Gnu make 3.81 > binutils 2.18.0.20080103 > util-linux 2.13.1.1 > mount 2.13.1.1 > module-init-tools found > Linux C Library 2.7 > Dynamic linker (ldd) 2.7 > Procps 3.2.7 > Console-tools 0.2.3 > Sh-utils 6.10 > udev 125 > Modules Loaded ipv6 bsd_comp usb_storage ppp_deflate > zlib_deflate ppp_ge > neric slhc w83627hf hwmon_vid hwmon i2c_dev saa7134_alsa > snd_hda_codec_realtek tuner_simple tuner_types mt352 snd_hda_intel > saa7134_dvb snd_hda_codec videobuf_dvb snd_pcm_oss snd_mixer_oss > dvb_core snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event > 8250_pnp snd_seq 8250 serial_core snd_timer snd_seq_device > saa7134 ehci_hcd ir_common snd v4l2_common videodev v4l1_compat > soundcore snd_page_alloc videobuf_dma_sg videobuf_core tveeprom usbcore > via_rhine i2c_core e1000 > > > As a result of the exception, the system becomes very unresponsive. Any > sort of I/O seems to have very poor response time. Ping times in the > gigabit network suddenly take several tens of milliseconds. It seems > this may have to do with the IRQ10 being somehow affected, but I'm not > sure. > > /proc/version: > > Linux version 2.6.32.7 (root@homemp3) (gcc version 4.3.2 (Debian > 4.3.2-1.1) ) #1 Sat Feb 6 10:50:05 CET 2010 > > /proc/cpuinfo: > > processor : 0 > vendor_id : GenuineIntel > cpu family : 15 > model : 4 > model name : Intel(R) Celeron(R) CPU 2.80GHz > stepping : 9 > cpu MHz : 2799.930 > cache size : 256 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmovpat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm > constant_tsc pebs bts pni dtes64 monitor ds_cpl tm2 cid cx16 xtpr lahf_lm > bogomips : 5623.13 > clflush size : 64 > cache_alignment : 128 > address sizes : 36 bits physical, 48 bits virtual > power management: > > > Output of lcpsi -vvv: > > 00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge > Subsystem: ASRock Incorporation Device 0308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort+ >SERR- <PERR+ INTx- > Latency: 8, Cache Line Size: 32 bytes > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [80] AGP version 3.5 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64 > bit- FW- AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate=<n > one> > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: agpgart-via > > 00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge > Subsystem: ASRock Incorporation Device 1308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge > Subsystem: ASRock Incorporation Device 2308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge > Subsystem: ASRock Incorporation Device 4308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller > (prog-if > 20 [IO(X)-APIC]) > Subsystem: ASRock Incorporation Device 5308 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge > (prog-if 00 [ > Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fc700000-fe7fffff > Prefetchable memory behind bridge: cff00000-dfefffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge > Controller (p > rog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 00001000-00001fff > Memory behind bridge: fe800000-fe8fffff > Prefetchable memory behind bridge: 40000000-401fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > <64ns, L1 > unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupporte > d- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPe > nd- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, > Latency L > 0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- > DLActive > - BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ > Surpise > + > Slot # 10, PowerLimit 75.000000; Interlock- > NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- > HPIrq- L > inkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlo > ck- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- > PresDet- Interl > ock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- > PMEIntEna- CRSV > isible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [68] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot > +,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ > Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [140] Virtual Channel <?> > > 00:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet > Controll > er (rev 05) > Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 (63750ns min), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at feba0000 (32-bit, non-prefetchable) [size=128K] > Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at cc00 [size=64] > Expansion ROM at feb60000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot > +,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=512 OST=1 > Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple > DMMRBC=20 > 48 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- > Kernel driver in use: e1000 > Kernel modules: e1000 > > 00:0a.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA > 300 TX4 > ) (rev 02) > Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at d400 [size=128] > Region 2: I/O ports at c800 [size=256] > Region 3: Memory at febfe000 (32-bit, non-prefetchable) [size=4K] > Region 4: Memory at febc0000 (32-bit, non-prefetchable) [size=128K] > Expansion ROM at febe0000 [disabled] [size=32K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: sata_promise > > 00:0c.0 Multimedia controller: Philips Semiconductors > SAA7131/SAA7133/SAA7135 Vi > deo Broadcast Decoder (rev d1) > Subsystem: Avermedia Technologies Inc Device 2c05 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: saa7134 > Kernel modules: saa7134 > > 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port > Controller (re > v 80) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: ASRock Incorporation Device 0591 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 > Interrupt: pin B routed to IRQ 10 > Region 0: I/O ports at e000 [size=8] > Region 1: I/O ports at dc00 [size=4] > Region 2: I/O ports at d880 [size=8] > Region 3: I/O ports at d800 [size=4] > Region 4: I/O ports at d480 [size=16] > Region 5: I/O ports at d000 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: sata_via > > 00:0f.1 IDE interface: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/ > C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP]) > Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 > Region 0: [virtual] Memory at 000001f0 (32-bit, > non-prefetchable) [disab > led] [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, > non-prefetchable) [disab > led] [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, > non-prefetchable) [disab > led] [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, > non-prefetchable) [disab > led] [size=1] > Region 4: I/O ports at fc00 [size=16] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: VIA_IDE > > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > (rev a0) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation K7VT6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 4: I/O ports at e080 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > (rev a0) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation K7VT6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 10 > Region 4: I/O ports at e400 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > (rev a0) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation K7VT6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 32 bytes > Interrupt: pin C routed to IRQ 10 > Region 4: I/O ports at e480 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller > (rev a0) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation K7VT6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 32 bytes > Interrupt: pin D routed to IRQ 10 > Region 4: I/O ports at ec00 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if > 20 [EHC > I]) > Subsystem: ASRock Incorporation K7VT6 motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 128 bytes > Interrupt: pin C routed to IRQ 10 > Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge > Subsystem: ASRock Incorporation Device 3337 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller > Subsystem: VIA Technologies, Inc. Device 337e > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort+ >SERR- <PERR+ INTx- > Latency: 32 > Capabilities: [58] HyperTransport: Interrupt Discovery and > Configuration > > > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] > (rev 7c) > Subsystem: ASRock Incorporation K7VT6 motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at e800 [size=256] > Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot > +,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: via-rhine > Kernel modules: via-rhine > > 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+ > > 01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 > MX200] ( > rev b2) (prog-if 00 [VGA controller]) > Subsystem: ABIT Computer Corp. Device 6107 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort > - <MAbort- >SERR- <PERR- INTx- > Latency: 32 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Expansion ROM at fe7f0000 [disabled] [size=64K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- > HTrans- 64 > bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate=<n > one> > Kernel modules: nvidiafb > > 80:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA > High De > finition Audio Controller) (rev 10) > Subsystem: ASRock Incorporation Device 0888 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step > ping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3ho > t+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v1) Root Complex Integrated > Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 > <1us > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupporte > d- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ > TransPe > nd+ > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, > Latency > L0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- > DLActive > - BWMgmt- ABWMgmt- > Capabilities: [100] #1106 > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel > > > /proc/ioports: > > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-0060 : keyboard > 0064-0064 : keyboard > 0070-0077 : rtc > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : 0000:00:0f.1 > 0170-0177 : via82cxxx > 01f0-01f7 : 0000:00:0f.1 > 01f0-01f7 : via82cxxx > 0295-0296 : w83627hf > 0295-0296 : pnp 00:09 > 0295-0296 : w83627hf > 02f8-02ff : serial > 0376-0376 : 0000:00:0f.1 > 0376-0376 : via82cxxx > 03c0-03df : vga+ > 03e0-03e7 : pnp 00:09 > 03f2-03f2 : floppy > 03f4-03f5 : floppy > 03f6-03f6 : 0000:00:0f.1 > 03f6-03f6 : via82cxxx > 03f7-03f7 : floppy > 03f8-03ff : serial > 0400-041f : pnp 00:09 > 04d0-04d1 : pnp 00:09 > 0800-087f : pnp 00:09 > 0800-0803 : ACPI PM1a_EVT_BLK > 0804-0805 : ACPI PM1a_CNT_BLK > 0808-080b : ACPI PM_TMR > 0810-0815 : ACPI CPU throttle > 0820-0823 : ACPI GPE0_BLK > 0cf8-0cff : PCI conf1 > 1000-1fff : PCI Bus 0000:02 > c800-c8ff : 0000:00:0a.0 > cc00-cc3f : 0000:00:09.0 > cc00-cc3f : e1000 > d000-d0ff : 0000:00:0f.0 > d000-d0ff : sata_via > d400-d47f : 0000:00:0a.0 > d480-d48f : 0000:00:0f.0 > d480-d48f : sata_via > d800-d803 : 0000:00:0f.0 > d800-d803 : sata_via > d880-d887 : 0000:00:0f.0 > d880-d887 : sata_via > dc00-dc03 : 0000:00:0f.0 > dc00-dc03 : sata_via > e000-e007 : 0000:00:0f.0 > e000-e007 : sata_via > e080-e09f : 0000:00:10.0 > e400-e41f : 0000:00:10.1 > e480-e49f : 0000:00:10.2 > e800-e8ff : 0000:00:12.0 > e800-e8ff : via-rhine > ec00-ec1f : 0000:00:10.3 > fc00-fc0f : 0000:00:0f.1 > fc00-fc0f : via82cxxx > > /proc/iomem: > > 00000000-0000ffff : reserved > 00010000-0009fbff : System RAM > 0009fc00-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000cc7ff : Video ROM > 000cc800-000d17ff : Adapter ROM > 000d1800-000d27ff : Adapter ROM > 000e6000-000fffff : reserved > 000f0000-000fffff : System ROM > 00100000-3ffaffff : System RAM > 01000000-0128c677 : Kernel code > 0128c678-0138f533 : Kernel data > 013e0000-014131ff : Kernel bss > 3ffb0000-3ffbffff : ACPI Tables > 3ffc0000-3ffeffff : ACPI Non-volatile Storage > 3fff0000-3fffffff : reserved > 40000000-401fffff : PCI Bus 0000:02 > cff00000-dfefffff : PCI Bus 0000:01 > d0000000-d7ffffff : 0000:01:00.0 > e0000000-efffffff : PCI MMCONFIG 0 [00-ff] > e0000000-efffffff : pnp 00:0e > f8000000-fbffffff : 0000:00:00.0 > fc700000-fe7fffff : PCI Bus 0000:01 > fd000000-fdffffff : 0000:01:00.0 > fe7f0000-fe7fffff : 0000:01:00.0 > fe800000-fe8fffff : PCI Bus 0000:02 > fe9fc000-fe9fffff : 0000:80:01.0 > fe9fc000-fe9fffff : pnp 00:09 > fe9fc000-fe9fffff : ICH HD audio > feb60000-feb7ffff : 0000:00:09.0 > feb80000-feb9ffff : 0000:00:09.0 > feb80000-feb9ffff : e1000 > feba0000-febbffff : 0000:00:09.0 > feba0000-febbffff : e1000 > febc0000-febdffff : 0000:00:0a.0 > febe0000-febe7fff : 0000:00:0a.0 > febfe000-febfefff : 0000:00:0a.0 > febfe000-febfefff : sata_promise > febff000-febff7ff : 0000:00:0c.0 > febff000-febff7ff : saa7133[0] > febff800-febff8ff : 0000:00:10.4 > febff800-febff8ff : ehci_hcd > febffc00-febffcff : 0000:00:12.0 > febffc00-febffcff : via-rhine > fec00000-fec00fff : pnp 00:0a > fee00000-fee00fff : reserved > fee00000-fee00fff : pnp 00:0a > ff780000-ffffffff : reserved > ffb80000-ffbfffff : pnp 00:09 > fff80000-ffffffff : pnp 00:0f > > /proc/scsi/scsi: > > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: ST31500341AS Rev: CC1H > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi4 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: ST3500630AS Rev: 3.AA > Type: Direct-Access ANSI SCSI revision: 05 Thanks. -- tejun ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <4B74F263.1060709@gmx.de>]
[parent not found: <4B7505CA.60409@kernel.org>]
* Re: Kernel Bug in ATA or SMART area [not found] ` <4B7505CA.60409@kernel.org> @ 2010-02-12 8:46 ` Axel Uhl 2010-02-17 2:29 ` Tejun Heo 0 siblings, 1 reply; 13+ messages in thread From: Axel Uhl @ 2010-02-12 8:46 UTC (permalink / raw) To: Tejun Heo; +Cc: linux-ide, linux-kernel [-- Attachment #1: Type: text/plain, Size: 2025 bytes --] Hi Tejun, (Cc list restored), I don't have a /var/log/boot.msg, only a /var/log/boot. Its contents: (Nothing has been logged yet.) Output of cat /proc/interrupts: CPU0 0: 41922385 XT-PIC-XT timer 1: 10 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 3: 4 XT-PIC-XT 4: 1 XT-PIC-XT 6: 3 XT-PIC-XT floppy 7: 1 XT-PIC-XT 8: 4 XT-PIC-XT rtc 9: 0 XT-PIC-XT acpi 10: 1501691 XT-PIC-XT sata_promise, sata_via, ehci_hcd:usb1, HDA Intel, eth6 11: 6089136 XT-PIC-XT saa7133[0], saa7133[0], eth5 12: 131 XT-PIC-XT i8042 14: 1570 XT-PIC-XT ide0 15: 1503 XT-PIC-XT ide1 NMI: 0 Non-maskable interrupts TRM: 0 Thermal event interrupts MCE: 0 Machine check exceptions MCP: 559 Machine check polls ERR: 1 Best, -- Axel Tejun Heo wrote: > Hello, > > Can you please restore cc list when you reply? > > On 02/12/2010 03:17 PM, Axel Uhl wrote: >> sorry, I'm not an expert on this, but are you saying the IRQ line is >> *too* crowded and I'm having a hardware problem, or is this to say that >> the kernel modules may not correctly handle the high frequency and total >> number of IRQs from different devices? Is there anything I can do on the >> hardware / BIOS side? Can I change the IRQ that some of those adapters >> use somehow to work around the problem? > > The hardware, kernel and drivers should be able to handle it fine but > it's just very unusual to have that many controllers sharing a single > IRQ line. I have no idea whether it would have anything to do with > the cause of the issue but it sure makes diagnosing the problem > harder. > > Can you please post /var/log/boot.msg and the output of cat > /proc/interrupts? > > Thanks. > -- Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 2124 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-12 8:46 ` Axel Uhl @ 2010-02-17 2:29 ` Tejun Heo 2010-02-17 20:50 ` Axel Uhl 0 siblings, 1 reply; 13+ messages in thread From: Tejun Heo @ 2010-02-17 2:29 UTC (permalink / raw) To: Axel Uhl; +Cc: linux-ide, linux-kernel Hello, On 02/12/2010 05:46 PM, Axel Uhl wrote: > I don't have a /var/log/boot.msg, only a /var/log/boot. Its contents: Then please attach output of dmesg after boot. Thanks. -- tejun ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-17 2:29 ` Tejun Heo @ 2010-02-17 20:50 ` Axel Uhl 2010-02-18 10:50 ` Mikael Pettersson 0 siblings, 1 reply; 13+ messages in thread From: Axel Uhl @ 2010-02-17 20:50 UTC (permalink / raw) To: Tejun Heo; +Cc: linux-ide, linux-kernel [-- Attachment #1: Type: text/plain, Size: 15806 bytes --] Here's what /var/log/dmesg contains: g Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Root Bridge [PCI1] (0000:80) pci 0000:80:01.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold pci 0000:80:01.0: PME# disabled pci_bus 0000:80: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 17 devices ACPI: ACPI bus type pnp unregistered system 00:09: ioport range 0x295-0x296 has been reserved system 00:09: ioport range 0x3e0-0x3e7 has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x400-0x41f has been reserved system 00:09: iomem range 0xfe9fc000-0xfe9fffff has been reserved system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0xc0000-0xcffff could not be reserved system 00:0f: iomem range 0xe0000-0xfffff could not be reserved system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved system 00:0f: iomem range 0xfff80000-0xffffffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xfc700000-0xfe7fffff pci 0000:00:01.0: PREFETCH window: 0xcff00000-0xdfefffff pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: 0x1000-0x1fff pci 0000:00:02.0: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:02.0: PREFETCH window: 0x40000000-0x401fffff pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:02.0: enabling device (0106 -> 0107) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered pci 0000:00:02.0: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:02.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xfc700000-0xfe7fffff] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xdfefffff] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x401fffff] pci_bus 0000:80: resource 0 io: [0x00-0xffff] pci_bus 0000:80: resource 1 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:01:00.0: Boot video device apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) apm: overridden by ACPI. highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 1749 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12b Linux agpgart interface v0.103 agpgart: Detected VIA PT880 Ultra chipset agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver via82cxxx 0000:00:0f.1: VIA vt8237a (rev 00) IDE UDMA133 via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x07) via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07 ide1: BM-DMA at 0xfc08-0xfc0f Probing IDE interface ide0... hda: Maxtor 6L300R0, ATA DISK drive hdb: Maxtor 6L300R0, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/133 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/133 mode selected Probing IDE interface ide1... hdc: SAMSUNG SP1614N, ATA DISK drive hdd: Maxtor 6L300R0, ATA DISK drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdd: UDMA/133 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legac y ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63 hda: cache flushes supported hda: hda1 hdb: max request size: 512KiB hdb: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63 hdb: cache flushes supported hdb: hdb1 hdb2 hdc: max request size: 512KiB hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63 hdc: cache flushes supported hdc: hdc1 hdd: max request size: 512KiB hdd: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63 hdd: cache flushes supported hdd: hdd1 SCSI Media Changer driver v0.25 sata_promise 0000:00:0a.0: version 2.12 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 sata_promise 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 scsi0 : sata_promise scsi1 : sata_promise scsi2 : sata_promise scsi3 : sata_promise ata1: SATA max UDMA/133 mmio m4096@0xfebfe000 ata 0xfebfe380 irq 10 ata2: SATA max UDMA/133 mmio m4096@0xfebfe000 ata 0xfebfe280 irq 10 ata3: SATA max UDMA/133 mmio m4096@0xfebfe000 ata 0xfebfe200 irq 10 ata4: SATA max UDMA/133 mmio m4096@0xfebfe000 ata 0xfebfe300 irq 10 sata_via 0000:00:0f.0: version 2.4 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 sata_via 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 sata_via 0000:00:0f.0: routed to hard irq line 10 scsi4 : sata_via scsi5 : sata_via ata5: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 10 ata6: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 10 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder Netfilter messages via NETLINK v0.30. ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 17 p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available input: AT Translated Set 2 keyboard as /class/input/input2 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: configured for UDMA/133 ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: Attached scsi generic sg0 type 0 sda1 sd 0:0:0:0: [sda] Attached SCSI disk input: ImPS/2 Logitech Wheel Mouse as /class/input/input3 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) scsi 4:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 4:0:0:0: Attached scsi generic sg1 type 0 sdb1 sd 4:0:0:0: [sdb] Attached SCSI disk ata6: SATA link down 1.5 Gbps (SStatus 0 SControl 300) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:1. Freeing unused kernel memory: 320k freed Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 e1000 0000:00:09.0: PCI: Disallowing DAC for device e1000: 0000:00:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:01:89:8c via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker Linux video capture interface: v2.00 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver saa7130/34: v4l2 driver version 0.2.15 loaded Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 eth1: VIA Rhine II at 0x1e800, 00:19:66:21:66:47, IRQ 11. eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. ehci_hcd 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 10, io mem 0xfebff800 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected saa7134 0000:00:0c.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 saa7133[0]: found at 0000:00:0c.0, rev: 209, irq: 11, latency: 32, mmio: 0xfebff 000 saa7133[0]: subsystem: 1461:2c05, board: AverTV DVB-T 777 [card=85,insmod option ] saa7133[0]: board init: gpio is 2ba00 input: saa7134 IR (AverTV DVB-T 777) as /class/input/input4 IRQ 11/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs udev: renamed network interface eth1 to eth5 udev: renamed network interface eth0 to eth6 saa7133[0]: i2c eeprom 00: 61 14 05 2c 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a8 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 32 00 c0 86 1e ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff i2c i2c-0: Invalid 7-bit address 0x7a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 dvb_init() allocating 1 frontend HDA Intel 0000:80:01.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 HDA Intel 0000:80:01.0: setting latency timer to 64 HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device tuner-simple 0-0061: unable to probe Philips TD1316 Hybrid Tuner, proceeding any way. tuner-simple 0-0061: creating new instance tuner-simple 0-0061: type set to 67 (Philips TD1316 Hybrid Tuner) DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... hda_codec: ALC888: BIOS auto-probing. saa7134 ALSA driver for DMA sound loaded IRQ 11/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs saa7133[0]/alsa: saa7133[0] at 0xfebff000 irq 11 registered as card -1 hda: UDMA/133 mode selected hda: UDMA/100 mode selected hda: UDMA/100 mode selected hdb: UDMA/133 mode selected hdb: UDMA/100 mode selected hdb: UDMA/100 mode selected hdc: UDMA/100 mode selected hdc: UDMA/100 mode selected hdc: UDMA/100 mode selected hdd: UDMA/133 mode selected hdd: UDMA/100 mode selected hdd: UDMA/100 mode selected Adding 4964076k swap on /dev/hdb2. Priority:-1 extents:1 across:4964076k EXT3 FS on sda1, internal journal i2c /dev entries driver w83627hf: Found W83697HF chip at 0x290 PPP generic driver version 2.4.2 PPP Deflate Compression module registered Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PPP BSD Compression module registered kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdd1, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with writeback data mode. e1000: eth6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX e1000: eth6 changing MTU from 1500 to 7200 NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth6: link is not ready e1000: eth6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready eth5: link down ADDRCONF(NETDEV_UP): eth5: link is not ready Cheers, -- Axel Tejun Heo wrote: > Hello, > > On 02/12/2010 05:46 PM, Axel Uhl wrote: >> I don't have a /var/log/boot.msg, only a /var/log/boot. Its contents: > > Then please attach output of dmesg after boot. > > Thanks. > -- Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 2124 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-17 20:50 ` Axel Uhl @ 2010-02-18 10:50 ` Mikael Pettersson 2010-02-19 18:53 ` Axel Uhl 0 siblings, 1 reply; 13+ messages in thread From: Mikael Pettersson @ 2010-02-18 10:50 UTC (permalink / raw) To: Axel Uhl; +Cc: Tejun Heo, linux-ide, linux-kernel Axel Uhl writes: > Here's what /var/log/dmesg contains: ... > Tejun Heo wrote: > > Hello, > > > > On 02/12/2010 05:46 PM, Axel Uhl wrote: > >> I don't have a /var/log/boot.msg, only a /var/log/boot. Its contents: > > > > Then please attach output of dmesg after boot. Judging from your initial message and this one, it appears that the problematic disk is driven by sata_via, but sata_via shares IRQ with an awful lot of other junk. Suggestions: 1. Enable IO/APIC support in the kernel. According to your previous lspci the chipset does have one. This should reduce IRQ sharing and make IRQ handling generally better. If there's still some sharing going on, try moving PCI cards to other slots. 2. Move the problematic disk around to e.g. the Promise controller. Do the stray exceptions persist? If so, then it's the disk that's at fault. As long as the libata's error handling recovers, things should work anyway. 3. (Unrelated but...) Why use Old IDE to drive the VIA PATA controller? Just use pata_via for that one, enable SCSI SR+SG support, and disable IDE. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-18 10:50 ` Mikael Pettersson @ 2010-02-19 18:53 ` Axel Uhl 2010-02-19 21:03 ` Mikael Pettersson 2010-02-20 3:50 ` Tejun Heo 0 siblings, 2 replies; 13+ messages in thread From: Axel Uhl @ 2010-02-19 18:53 UTC (permalink / raw) To: Mikael Pettersson; +Cc: Tejun Heo, linux-ide, linux-kernel [-- Attachment #1.1: Type: text/plain, Size: 2368 bytes --] I now enabled IO/APIC in my kernel. See attached .config. I also enabled pata_via but was unsure which IDE driver to disable. The kernel rebooted fine. The following appeared in my syslog when the smartctl command spinned up the disk: Feb 19 18:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Feb 19 18:57:09 homemp3 kernel: ata5.00: failed command: SMART Feb 19 18:57:09 homemp3 kernel: ata5.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 Feb 19 18:57:09 homemp3 kernel: res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Feb 19 18:57:09 homemp3 kernel: ata5.00: status: { DRDY } Feb 19 18:57:09 homemp3 kernel: ata5: soft resetting link Feb 19 18:57:09 homemp3 kernel: ata5.00: configured for UDMA/133 Feb 19 18:57:09 homemp3 kernel: ata5: EH complete At least it seems that the kernel recovered better from this exception than before. In particular, IRQ10 didn't get disabled and so I/O continued to work fine. Thanks for the hint. Would you consider the exception above a serious problem that should be taken care of somehow? Best, -- Axel Mikael Pettersson wrote: > Axel Uhl writes: > > Here's what /var/log/dmesg contains: > ... > > Tejun Heo wrote: > > > Hello, > > > > > > On 02/12/2010 05:46 PM, Axel Uhl wrote: > > >> I don't have a /var/log/boot.msg, only a /var/log/boot. Its contents: > > > > > > Then please attach output of dmesg after boot. > > Judging from your initial message and this one, it appears that the > problematic disk is driven by sata_via, but sata_via shares IRQ with > an awful lot of other junk. > > Suggestions: > 1. Enable IO/APIC support in the kernel. According to your previous lspci > the chipset does have one. This should reduce IRQ sharing and make IRQ > handling generally better. If there's still some sharing going on, > try moving PCI cards to other slots. > 2. Move the problematic disk around to e.g. the Promise controller. Do the > stray exceptions persist? If so, then it's the disk that's at fault. > As long as the libata's error handling recovers, things should work anyway. > 3. (Unrelated but...) Why use Old IDE to drive the VIA PATA controller? > Just use pata_via for that one, enable SCSI SR+SG support, and disable IDE. > -- Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi [-- Attachment #1.2: .config --] [-- Type: text/plain, Size: 66426 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.32.7 # Thu Feb 18 22:04:45 2010 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_32_LAZY_GS=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # # CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # CONFIG_SLOW_WORK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_FREEZER=y # # Processor type and features # # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SMP is not set # CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_ELAN is not set # CONFIG_X86_MRST is not set # CONFIG_X86_RDC321X is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=5 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y # CONFIG_X86_DS is not set # CONFIG_HPET_TIMER is not set CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=1 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_X86_ANCIENT_MCE is not set CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_X86_CPU_DEBUG is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y # CONFIG_MEMORY_FAILURE is not set # CONFIG_HIGHPTE is not set # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_PROCFS_POWER=y # CONFIG_ACPI_POWER_METER is not set CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=y # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_SBS is not set # CONFIG_SFI is not set CONFIG_X86_APM_BOOT=y CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set CONFIG_APM_CPU_IDLE=y # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_ALLOW_INTS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # # CONFIG_X86_ACPI_CPUFREQ is not set # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set # CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set # CONFIG_X86_SPEEDSTEP_SMI is not set CONFIG_X86_P4_CLOCKMOD=y # CONFIG_X86_CPUFREQ_NFORCE2 is not set # CONFIG_X86_LONGRUN is not set # CONFIG_X86_LONGHAUL is not set # CONFIG_X86_E_POWERSAVER is not set # # shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set # CONFIG_PCI_GOOLPC is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y # CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_OLPC is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m # CONFIG_TCP_CONG_HSTCP is not set # CONFIG_TCP_CONG_HYBLA is not set # CONFIG_TCP_CONG_VEGAS is not set # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set # CONFIG_TCP_CONG_YEAH is not set # CONFIG_TCP_CONG_ILLINOIS is not set # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=y CONFIG_NETFILTER_XT_TARGET_MARK=y # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=y CONFIG_NETFILTER_XT_MATCH_DCCP=y CONFIG_NETFILTER_XT_MATCH_DSCP=y CONFIG_NETFILTER_XT_MATCH_ESP=y # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set CONFIG_NETFILTER_XT_MATCH_HL=y # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set CONFIG_NETFILTER_XT_MATCH_LENGTH=y CONFIG_NETFILTER_XT_MATCH_LIMIT=y CONFIG_NETFILTER_XT_MATCH_MAC=y CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y # CONFIG_NETFILTER_XT_MATCH_OWNER is not set CONFIG_NETFILTER_XT_MATCH_POLICY=y CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y CONFIG_NETFILTER_XT_MATCH_QUOTA=y # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set CONFIG_NETFILTER_XT_MATCH_REALM=y # CONFIG_NETFILTER_XT_MATCH_RECENT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=y CONFIG_NETFILTER_XT_MATCH_STATISTIC=y CONFIG_NETFILTER_XT_MATCH_STRING=y CONFIG_NETFILTER_XT_MATCH_TCPMSS=y # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_NETFILTER_XT_MATCH_OSF is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # # CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_ADDRTYPE=y CONFIG_IP_NF_MATCH_AH=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_TTL=y CONFIG_IP_NF_RAW=y CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y CONFIG_IP_NF_ARP_MANGLE=y # # IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m # CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m # CONFIG_NET_SCH_DRR is not set CONFIG_NET_SCH_INGRESS=m # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_CLS_FLOW is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m CONFIG_NET_EMATCH_NBYTE=m CONFIG_NET_EMATCH_U32=m CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m # CONFIG_NET_ACT_IPT is not set # CONFIG_NET_ACT_NAT is not set CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m # CONFIG_NET_ACT_SKBEDIT is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_ISAPNP=y # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y # CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_CS5535 is not set # CONFIG_BLK_DEV_CS5536 is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set CONFIG_BLK_DEV_SIS5513=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set # # Other IDE chipsets support # # # Note: most of these also require special kernel boot parameters # # CONFIG_BLK_DEV_4DRIVES is not set # CONFIG_BLK_DEV_ALI14XX is not set # CONFIG_BLK_DEV_DTC2278 is not set # CONFIG_BLK_DEV_HT6560B is not set # CONFIG_BLK_DEV_QD65XX is not set # CONFIG_BLK_DEV_UMC8672 is not set CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_FCOE_FNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set CONFIG_SATA_PROMISE=y # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_ISAPNP is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_QDI is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set CONFIG_PATA_VIA=y # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_WINBOND_VLB is not set # CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # You can enable one or both FireWire driver stacks. # # # See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set CONFIG_I2O=m CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_CONFIG=m CONFIG_I2O_CONFIG_OLD_IOCTL=y CONFIG_I2O_BUS=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_IFB is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=m # CONFIG_8139CP is not set CONFIG_8139TOO=m CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_R6040 is not set CONFIG_SIS900=m # CONFIG_EPIC100 is not set # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851_MLL is not set CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=m # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set # CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=m CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=m CONFIG_SERIAL_8250_PNP=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=m # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set CONFIG_HW_RANDOM_AMD=y CONFIG_HW_RANDOM_GEODE=y # CONFIG_HW_RANDOM_VIA is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # ACPI drivers # # CONFIG_I2C_SCMI is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers # # CONFIG_I2C_VOODOO3 is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_PCA_ISA is not set # CONFIG_I2C_PCA_PLATFORM is not set CONFIG_I2C_STUB=m # CONFIG_SCx200_ACB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # # PPS support # # CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set CONFIG_SENSORS_IT87=m # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set CONFIG_SENSORS_SIS5595=m # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set CONFIG_SENSORS_W83627HF=m # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # # ACPI drivers # # CONFIG_SENSORS_ATK0110 is not set # CONFIG_SENSORS_LIS3LV02D is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=m # # Multimedia core support # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_COMMON=m CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_DVB_CORE=m CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_MEDIA_ATTACH=y CONFIG_MEDIA_TUNER=m # CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_IR_I2C=m CONFIG_VIDEO_SAA6588=m # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set CONFIG_VIDEO_STRADIS=m # CONFIG_VIDEO_ZORAN is not set CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_DVB=m # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_CX23885 is not set # CONFIG_VIDEO_AU0828 is not set # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_CX18 is not set # CONFIG_VIDEO_SAA7164 is not set # CONFIG_VIDEO_CAFE_CCIC is not set # CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m # CONFIG_USB_M5602 is not set # CONFIG_USB_STV06XX is not set # CONFIG_USB_GL860 is not set # CONFIG_USB_GSPCA_CONEX is not set # CONFIG_USB_GSPCA_ETOMS is not set # CONFIG_USB_GSPCA_FINEPIX is not set # CONFIG_USB_GSPCA_JEILINJ is not set # CONFIG_USB_GSPCA_MARS is not set # CONFIG_USB_GSPCA_MR97310A is not set # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set # CONFIG_USB_GSPCA_PAC207 is not set # CONFIG_USB_GSPCA_PAC7311 is not set # CONFIG_USB_GSPCA_SN9C20X is not set # CONFIG_USB_GSPCA_SONIXB is not set # CONFIG_USB_GSPCA_SONIXJ is not set # CONFIG_USB_GSPCA_SPCA500 is not set # CONFIG_USB_GSPCA_SPCA501 is not set # CONFIG_USB_GSPCA_SPCA505 is not set # CONFIG_USB_GSPCA_SPCA506 is not set # CONFIG_USB_GSPCA_SPCA508 is not set # CONFIG_USB_GSPCA_SPCA561 is not set # CONFIG_USB_GSPCA_SQ905 is not set # CONFIG_USB_GSPCA_SQ905C is not set # CONFIG_USB_GSPCA_STK014 is not set # CONFIG_USB_GSPCA_SUNPLUS is not set # CONFIG_USB_GSPCA_T613 is not set # CONFIG_USB_GSPCA_TV8532 is not set # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_ZC3XX is not set # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_HDPVR is not set # CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_CX231XX is not set # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set # CONFIG_USB_ET61X251 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set CONFIG_USB_PWC_INPUT_EVDEV=y # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_SF16FMR2 is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # CONFIG_I2C_SI4713 is not set # CONFIG_RADIO_SI4713 is not set # CONFIG_USB_DSBR is not set # CONFIG_RADIO_SI470X is not set # CONFIG_USB_MR800 is not set # CONFIG_RADIO_TEA5764 is not set CONFIG_DVB_MAX_ADAPTERS=8 # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # CONFIG_TTPCI_EEPROM=m CONFIG_DVB_AV7110=m CONFIG_DVB_AV7110_OSD=y # CONFIG_DVB_BUDGET_CORE is not set # # Supported USB Adapters # # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_SMS_SIANO_MDTV is not set # # Supported FlexCopII (B2C2) Adapters # # CONFIG_DVB_B2C2_FLEXCOP is not set # # Supported BT878 Adapters # # # Supported Pluto2 Adapters # # CONFIG_DVB_PLUTO2 is not set # # Supported SDMC DM1105 Adapters # # CONFIG_DVB_DM1105 is not set # # Supported Earthsoft PT1 Adapters # # CONFIG_DVB_PT1 is not set # # Supported DVB Frontends # # CONFIG_DVB_FE_CUSTOMISE is not set CONFIG_DVB_MT312=m CONFIG_DVB_ZL10036=m CONFIG_DVB_ZL10039=m CONFIG_DVB_STV0299=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m CONFIG_DVB_VES1X93=m CONFIG_DVB_TDA826X=m CONFIG_DVB_SP8870=m CONFIG_DVB_L64781=m CONFIG_DVB_TDA1004X=m CONFIG_DVB_MT352=m CONFIG_DVB_ZL10353=m CONFIG_DVB_TDA10048=m CONFIG_DVB_VES1820=m CONFIG_DVB_STV0297=m CONFIG_DVB_NXT200X=m CONFIG_DVB_LGDT3305=m CONFIG_DVB_PLL=m CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set CONFIG_AGP_AMD=y # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set CONFIG_AGP_SIS=y # CONFIG_AGP_SWORKS is not set CONFIG_AGP_VIA=y # CONFIG_AGP_EFFICEON is not set CONFIG_VGA_ARB=y # CONFIG_DRM is not set CONFIG_VGASTATE=m # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=m # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=m CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set CONFIG_FB_NVIDIA_BACKLIGHT=y # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_BACKLIGHT_GENERIC=m # CONFIG_BACKLIGHT_PROGEAR is not set # CONFIG_BACKLIGHT_MBP_NVIDIA is not set # CONFIG_BACKLIGHT_SAHARA is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_RAWMIDI_SEQ=m # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_AC97_POWER_SAVE is not set CONFIG_SND_ISA=y # CONFIG_SND_ADLIB is not set # CONFIG_SND_AD1816A is not set # CONFIG_SND_AD1848 is not set # CONFIG_SND_ALS100 is not set # CONFIG_SND_AZT2320 is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_DT019X is not set # CONFIG_SND_ES968 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_SC6000 is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_MIRO is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_MSND_PINNACLE is not set # CONFIG_SND_MSND_CLASSIC is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set CONFIG_SND_ENS1370=m # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=m # CONFIG_SND_HDA_HWDEP is not set # CONFIG_SND_HDA_INPUT_BEEP is not set # CONFIG_SND_HDA_INPUT_JACK is not set # CONFIG_SND_HDA_PATCH_LOADER is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_HDA_POWER_SAVE is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SIS7019 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set CONFIG_SND_VIA82XX=m # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_USB_US122L is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=m # CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y # # Special HID drivers # CONFIG_HID_A4TECH=m CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=m CONFIG_HID_KYE=m CONFIG_HID_GYRATION=m CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m CONFIG_HID_LOGITECH=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m CONFIG_HID_NTRIG=m CONFIG_HID_PANTHERLORD=m # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_HID_GREENASIA=m # CONFIG_GREENASIA_FF is not set CONFIG_HID_SMARTJOYPLUS=m # CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=m CONFIG_HID_THRUSTMASTER=m # CONFIG_THRUSTMASTER_FF is not set CONFIG_HID_ZEROPLUS=m # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=m # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # # Enable Host or Gadget support to see Inventra options # # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # # TI VLYNQ # # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_ASUS_LAPTOP is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_TC1100_WMI is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_COMPAL_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_TOPSTAR_LAPTOP is not set # CONFIG_ACPI_TOSHIBA is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=m CONFIG_ROMFS_BACKED_BY_BLOCK=y # CONFIG_ROMFS_BACKED_BY_MTD is not set # CONFIG_ROMFS_BACKED_BY_BOTH is not set CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=y CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_STRIP_ASM_SYMS is not set CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=y # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_OPTIMIZE_INLINING is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_IMA is not set CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=m CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_HASH2=m CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CRC32C_INTEL is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_AES_586 is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_586 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_586 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m # CONFIG_CRYPTO_DEV_GEODE is not set # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_LGUEST is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 2124 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-19 18:53 ` Axel Uhl @ 2010-02-19 21:03 ` Mikael Pettersson 2010-02-20 8:46 ` Axel Uhl 2010-02-20 3:50 ` Tejun Heo 1 sibling, 1 reply; 13+ messages in thread From: Mikael Pettersson @ 2010-02-19 21:03 UTC (permalink / raw) To: Axel Uhl; +Cc: Mikael Pettersson, Tejun Heo, linux-ide, linux-kernel Axel Uhl writes: > I now enabled IO/APIC in my kernel. See attached .config. I also enabled > pata_via but was unsure which IDE driver to disable. That would be VIA82CXXX. But all your PATA/SATA controllers are now driven by libata, so you can disable IDE, i.e. set CONFIG_IDE=n. > The kernel > rebooted fine. The following appeared in my syslog when the smartctl > command spinned up the disk: > > Feb 19 18:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 > SErr 0x0 action 0x6 frozen > Feb 19 18:57:09 homemp3 kernel: ata5.00: failed command: SMART > Feb 19 18:57:09 homemp3 kernel: ata5.00: cmd > b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 > Feb 19 18:57:09 homemp3 kernel: res > 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > Feb 19 18:57:09 homemp3 kernel: ata5.00: status: { DRDY } > Feb 19 18:57:09 homemp3 kernel: ata5: soft resetting link > Feb 19 18:57:09 homemp3 kernel: ata5.00: configured for UDMA/133 > Feb 19 18:57:09 homemp3 kernel: ata5: EH complete > > > At least it seems that the kernel recovered better from this exception > than before. In particular, IRQ10 didn't get disabled and so I/O > continued to work fine. Thanks for the hint. > > Would you consider the exception above a serious problem that should be > taken care of somehow? Apparently this disk likes to complain when issued a SMART command while spun down, but as libata EH recovers nicely there's no real reason to worry. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-19 21:03 ` Mikael Pettersson @ 2010-02-20 8:46 ` Axel Uhl 2010-02-20 12:10 ` Mikael Pettersson 0 siblings, 1 reply; 13+ messages in thread From: Axel Uhl @ 2010-02-20 8:46 UTC (permalink / raw) To: Mikael Pettersson; +Cc: Tejun Heo, linux-ide, linux-kernel [-- Attachment #1: Type: text/plain, Size: 4290 bytes --] Hi Mikael, BTW, how do you know that all my PATA controllers are driven by libata? From the current /var/log/dmesg: Uniform Multi-Platform E-IDE driver via82cxxx 0000:00:0f.1: VIA vt8237a (rev 00) IDE UDMA133 via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x07) via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07 ide1: BM-DMA at 0xfc08-0xfc0f Probing IDE interface ide0... hda: Maxtor 6L300R0, ATA DISK drive hdb: Maxtor 6L300R0, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/133 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/133 mode selected Probing IDE interface ide1... hdc: SAMSUNG SP1614N, ATA DISK drive hdd: Maxtor 6L300R0, ATA DISK drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdd: UDMA/133 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63 hda: cache flushes supported hda: hda1 hdb: max request size: 512KiB hdb: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63 hdb: cache flushes supported hdb: hdb1 hdb2 hdc: max request size: 512KiB hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63 hdc: cache flushes supported hdc: hdc1 hdd: max request size: 512KiB hdd: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63 hdd: cache flushes supported hdd: hdd1 SCSI Media Changer driver v0.25 sata_promise 0000:00:0a.0: version 2.12 sata_promise 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 scsi0 : sata_promise scsi1 : sata_promise scsi2 : sata_promise scsi3 : sata_promise ata1: SATA max UDMA/133 mmio m4096@0xfebfe000 ata 0xfebfe380 irq 18 ata2: SATA max UDMA/133 mmio m4096@0xfebfe000 ata 0xfebfe280 irq 18 ata3: SATA max UDMA/133 mmio m4096@0xfebfe000 ata 0xfebfe200 irq 18 ata4: SATA max UDMA/133 mmio m4096@0xfebfe000 ata 0xfebfe300 irq 18 sata_via 0000:00:0f.0: version 2.4 sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 sata_via 0000:00:0f.0: routed to hard irq line 10 scsi4 : sata_via scsi5 : sata_via ata5: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 21 ata6: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 21 This to me looks at least as if the VIA IDE driver still recognizes the IDE disks. Best, -- Axel Mikael Pettersson wrote: > Axel Uhl writes: > > I now enabled IO/APIC in my kernel. See attached .config. I also enabled > > pata_via but was unsure which IDE driver to disable. > > That would be VIA82CXXX. But all your PATA/SATA controllers are now driven > by libata, so you can disable IDE, i.e. set CONFIG_IDE=n. > > > The kernel > > rebooted fine. The following appeared in my syslog when the smartctl > > command spinned up the disk: > > > > Feb 19 18:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 > > SErr 0x0 action 0x6 frozen > > Feb 19 18:57:09 homemp3 kernel: ata5.00: failed command: SMART > > Feb 19 18:57:09 homemp3 kernel: ata5.00: cmd > > b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 > > Feb 19 18:57:09 homemp3 kernel: res > > 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > Feb 19 18:57:09 homemp3 kernel: ata5.00: status: { DRDY } > > Feb 19 18:57:09 homemp3 kernel: ata5: soft resetting link > > Feb 19 18:57:09 homemp3 kernel: ata5.00: configured for UDMA/133 > > Feb 19 18:57:09 homemp3 kernel: ata5: EH complete > > > > > > At least it seems that the kernel recovered better from this exception > > than before. In particular, IRQ10 didn't get disabled and so I/O > > continued to work fine. Thanks for the hint. > > > > Would you consider the exception above a serious problem that should be > > taken care of somehow? > > Apparently this disk likes to complain when issued a SMART command while spun > down, but as libata EH recovers nicely there's no real reason to worry. > -- Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 2124 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-20 8:46 ` Axel Uhl @ 2010-02-20 12:10 ` Mikael Pettersson 2010-02-20 22:50 ` Axel Uhl 0 siblings, 1 reply; 13+ messages in thread From: Mikael Pettersson @ 2010-02-20 12:10 UTC (permalink / raw) To: Axel Uhl; +Cc: Mikael Pettersson, Tejun Heo, linux-ide, linux-kernel (Please don't top-post on Linux mailing lists.) Axel Uhl writes: > Hi Mikael, > > BTW, how do you know that all my PATA controllers are driven by libata? Because you wrote: > > > I also enabled > > > pata_via but was unsure which IDE driver to disable. and pata_via is libata's replacement for IDE's via82cxx. Since you kept both drivers enabled, it seems that IDE's via82cxx won the race to claim the hardware. Bummer. Just disable CONFIG_IDE. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-20 12:10 ` Mikael Pettersson @ 2010-02-20 22:50 ` Axel Uhl 0 siblings, 0 replies; 13+ messages in thread From: Axel Uhl @ 2010-02-20 22:50 UTC (permalink / raw) To: Mikael Pettersson; +Cc: Tejun Heo, linux-ide, linux-kernel [-- Attachment #1: Type: text/plain, Size: 910 bytes --] I now disabled CONFIG_IDE. pata_via now takes over the IDE disks. Changes in /etc/fstab were necessary because /dev/hd[abcd] now became /dev/sd[cdef]. Everything else seems to work normally for now. I'll check if this also makes the exception go away altogether. Thanks again and best regards, -- Axel Mikael Pettersson wrote: > (Please don't top-post on Linux mailing lists.) > > Axel Uhl writes: > > Hi Mikael, > > > > BTW, how do you know that all my PATA controllers are driven by libata? > > Because you wrote: > > > > > I also enabled > > > > pata_via but was unsure which IDE driver to disable. > > and pata_via is libata's replacement for IDE's via82cxx. > > Since you kept both drivers enabled, it seems that IDE's via82cxx won the > race to claim the hardware. Bummer. > > Just disable CONFIG_IDE. > -- Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 2124 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Kernel Bug in ATA or SMART area 2010-02-19 18:53 ` Axel Uhl 2010-02-19 21:03 ` Mikael Pettersson @ 2010-02-20 3:50 ` Tejun Heo 1 sibling, 0 replies; 13+ messages in thread From: Tejun Heo @ 2010-02-20 3:50 UTC (permalink / raw) To: Axel Uhl; +Cc: Mikael Pettersson, linux-ide, linux-kernel Hello, On 02/20/2010 03:53 AM, Axel Uhl wrote: > I now enabled IO/APIC in my kernel. See attached .config. I also enabled > pata_via but was unsure which IDE driver to disable. The kernel > rebooted fine. The following appeared in my syslog when the smartctl > command spinned up the disk: > > Feb 19 18:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 > SErr 0x0 action 0x6 frozen > Feb 19 18:57:09 homemp3 kernel: ata5.00: failed command: SMART > Feb 19 18:57:09 homemp3 kernel: ata5.00: cmd > b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 > Feb 19 18:57:09 homemp3 kernel: res > 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > Feb 19 18:57:09 homemp3 kernel: ata5.00: status: { DRDY } > Feb 19 18:57:09 homemp3 kernel: ata5: soft resetting link > Feb 19 18:57:09 homemp3 kernel: ata5.00: configured for UDMA/133 > Feb 19 18:57:09 homemp3 kernel: ata5: EH complete > > At least it seems that the kernel recovered better from this exception > than before. In particular, IRQ10 didn't get disabled and so I/O > continued to work fine. Thanks for the hint. The SMART error isn't likely to be related to the nobody cared. Neither is the switch to libata driver. One possibility is that the IRQ line is shared with yet another device which the corresponding driver didn't take care of (there was an i2c controller raising interrupt behind the driver's back). > Would you consider the exception above a serious problem that should be > taken care of somehow? In itself, it's not dangerous at all although repeated occurrences could be annoying. Thanks. -- tejun ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2010-02-20 22:50 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4B72941A.7060704@gmx.de>
2010-02-11 20:21 ` Kernel Bug in ATA or SMART area Maciej Rutecki
2010-02-11 22:18 ` Axel Uhl
2010-02-12 2:32 ` Tejun Heo
[not found] ` <4B74F263.1060709@gmx.de>
[not found] ` <4B7505CA.60409@kernel.org>
2010-02-12 8:46 ` Axel Uhl
2010-02-17 2:29 ` Tejun Heo
2010-02-17 20:50 ` Axel Uhl
2010-02-18 10:50 ` Mikael Pettersson
2010-02-19 18:53 ` Axel Uhl
2010-02-19 21:03 ` Mikael Pettersson
2010-02-20 8:46 ` Axel Uhl
2010-02-20 12:10 ` Mikael Pettersson
2010-02-20 22:50 ` Axel Uhl
2010-02-20 3:50 ` Tejun Heo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).