Re: possible esata regression in 2.6.35

[Jeff Garzik <jeff@garzik.org>]

On 08/22/2010 03:54 PM, Jeff Garzik wrote:
> On 08/21/2010 02:52 PM, Nicolas Jungers wrote:
>> My arm box doesn't succeed to use my esata port multiplier (addonics
>> sil3726 based). It was working well with 2.6.34.1 and 2.6.34.4 but not
>> with both 2.6.35.2 and 2.6.35.3. I haven't test other kernels.
>>
>> The kernels are from http://sheeva.with-linux.com/sheeva/ with for
>> example the following config
>> http://sheeva.with-linux.com/sheeva/2.6.35.3/sheeva-2.6.35.3.config
>>
>> The symptoms are in the console a loop on the esata links. Here is the
>> start of it:
>>
>> ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
>> ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect
>> ata2: SError: { PHYRdyChg DevExch }
>> ata2: hard resetting link
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
>> ata2.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
>
> Can you post or link to the entire dmesg?
>
> Notably, we need to see the probe messages to determine what SATA chip
> you are using... From the edma_err_cause config I'd guess sata_mv, but
> more info would be useful.

Nevermind, I see the reply (it got auto-sorted into the wrong folder 
locally).