Re: sata_sil boot failure with 2.6.35

["Jan Beulich" <JBeulich@novell.com>]

[-- Attachment #1: Type: text/plain, Size: 630 bytes --]

>>> On 23.08.10 at 12:28, Tejun Heo <tj@kernel.org> wrote:
> This apparently is not an isolated case.
> 
>   https://bugzilla.kernel.org/show_bug.cgi?id=16606 
> 
> For some reason, the NODEV detection is getting triggered spuriously
> which is really strange given that that part of code has been *really*
> stable for very long time now.  Jan, can you please apply the
> following patch and attach the kernel log?
> 
>   https://bugzilla.kernel.org/attachment.cgi?id=27513 

Attached (but I think it doesn't tell more than what I already wrote
in the original description).

Thanks for looking into this,
Jan


[-- Attachment #2: sahara.log --]
[-- Type: application/octet-stream, Size: 24445 bytes --]

Linux version 2.6.35.3-2010-08-19-jb (jbeulich@dus-dev-sl11-2p) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #2 SMP Mon Aug 23 14:51:46 CEST 2010
Command line: root=/dev/sda2 i8042.noloop noresume splash=verbose vga=0x31a ignore_loglevel console=ttyS0,115200 console=tty0
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000a7e90000 (usable)
 BIOS-e820: 00000000a7e90000 - 00000000a7e98000 (ACPI data)
 BIOS-e820: 00000000a7e98000 - 00000000a7f00000 (ACPI NVS)
 BIOS-e820: 00000000a7f00000 - 00000000b0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
debug: ignoring loglevel setting.
NX (Execute Disable) protection: active
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x150000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DBFFF uncachable
  DC000-E3FFF write-back
  E4000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFE0000000 write-back
  2 base 00A0000000 mask FFF0000000 write-back
  3 base 0100000000 mask FFC0000000 write-back
  4 base 0140000000 mask FFF0000000 write-back
  5 base 00A8000000 mask FFF8000000 uncachable
  6 disabled
  7 disabled
TOM2: 0000000150000000 aka 5376M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000a8000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xa7e90 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f6db0] f6db0
init_memory_mapping: 0000000000000000-00000000a7e90000
 0000000000 - 00a7e00000 page 2M
 00a7e00000 - 00a7e90000 page 4k
kernel direct mapping tables up to a7e90000 @ 12000-17000
init_memory_mapping: 0000000100000000-0000000150000000
 0100000000 - 0150000000 page 2M
kernel direct mapping tables up to 150000000 @ 15000-1c000
RAMDISK: 379e6000 - 37ff0000
ACPI: RSDP 00000000000f6d80 00014 (v00 PTLTD )
ACPI: RSDT 00000000a7e91e63 00038 (v01 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP 00000000a7e97c36 00074 (v01 ATI    Piranha  06040000 ATI  000F4240)
ACPI: DSDT 00000000a7e91e9b 05D9B (v01    ATI    SB400 06040000 MSFT 0100000E)
ACPI: FACS 00000000a7e98fc0 00040
ACPI: TCPA 00000000a7e97caa 00032 (v02 AMD             06040000 PTEC 00000000)
ACPI: SSDT 00000000a7e97cdc 0028A (v01 AMD    POWERNOW 06040000 AMD  00000001)
ACPI: APIC 00000000a7e97f66 0005E (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: MCFG 00000000a7e97fc4 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00150000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000a7e90
    0: 0x00100000 -> 0x00150000
On node 0 totalpages: 1015327
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3927 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 669384 pages, LIFO batch:31
  Normal zone: 4480 pages used for memmap
  Normal zone: 323200 pages, LIFO batch:31
SB4X0 revision 0x12
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [17000 - 177ff]
Allocating PCI resources starting at b0000000 (gap: b0000000:30000000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s76352 r8192 d21952 u1048576
pcpu-alloc: s76352 r8192 d21952 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 996511
Kernel command line: root=/dev/sda2 i8042.noloop noresume splash=verbose vga=0x31a ignore_loglevel console=ttyS0,115200 console=tty0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
Subtract (53 early reservations)
  #1 [0001000000 - 000171c678]   TEXT DATA BSS
  #2 [00379e6000 - 0037ff0000]         RAMDISK
  #3 [000171d000 - 000171d178]             BRK
  #4 [00000f6dc0 - 0000100000]   BIOS reserved
  #5 [00000f6db0 - 00000f6dc0]    MP-table mpf
  #6 [000009f800 - 000009fd71]   BIOS reserved
  #7 [000009fe9d - 00000f6db0]   BIOS reserved
  #8 [000009fd71 - 000009fe9d]    MP-table mpc
  #9 [0000010000 - 0000012000]      TRAMPOLINE
  #10 [0000012000 - 0000015000]         PGTABLE
  #11 [0000015000 - 0000017000]         PGTABLE
  #12 [000171d180 - 000171e180]         BOOTMEM
  #13 [000171c680 - 000171c968]         BOOTMEM
  #14 [0001f1f000 - 0001f20000]         BOOTMEM
  #15 [0001f20000 - 0001f21000]         BOOTMEM
  #16 [0002000000 - 0005800000]        MEMMAP 0
  #17 [000171c980 - 000171cb00]         BOOTMEM
  #18 [000171e180 - 0001736180]         BOOTMEM
  #19 [0001736180 - 0001742180]         BOOTMEM
  #20 [0001743000 - 0001744000]         BOOTMEM
  #21 [000171cb00 - 000171cb43]         BOOTMEM
  #22 [000171cb80 - 000171ce20]         BOOTMEM
  #23 [000171ce40 - 000171cea8]         BOOTMEM
  #24 [000171cec0 - 000171cf28]         BOOTMEM
  #25 [000171cf40 - 000171cfa8]         BOOTMEM
  #26 [0001742180 - 00017421e8]         BOOTMEM
  #27 [0001742200 - 0001742268]         BOOTMEM
  #28 [0001742280 - 00017422e8]         BOOTMEM
  #29 [0001742300 - 0001742368]         BOOTMEM
  #30 [0001742380 - 00017423e8]         BOOTMEM
  #31 [0001742400 - 0001742468]         BOOTMEM
  #32 [0001742480 - 00017424e8]         BOOTMEM
  #33 [0001742500 - 0001742568]         BOOTMEM
  #34 [0001742580 - 00017425f0]         BOOTMEM
  #35 [0001742600 - 0001742670]         BOOTMEM
  #36 [0001800000 - 000181a000]         BOOTMEM
  #37 [0001900000 - 000191a000]         BOOTMEM
  #38 [000171cfc0 - 000171cfc8]         BOOTMEM
  #39 [0001742680 - 0001742688]         BOOTMEM
  #40 [00017426c0 - 00017426c8]         BOOTMEM
  #41 [0001742700 - 0001742710]         BOOTMEM
  #42 [0001742740 - 0001742880]         BOOTMEM
  #43 [0001742880 - 00017428e0]         BOOTMEM
  #44 [0001742900 - 0001742960]         BOOTMEM
  #45 [0001744000 - 000174c000]         BOOTMEM
  #46 [000191a000 - 0001d1a000]         BOOTMEM
  #47 [0001d1a000 - 0001f1a000]         BOOTMEM
  #48 [0020000000 - 0024000000]         BOOTMEM
  #49 [0005800000 - 0009800000]         BOOTMEM
  #50 [000174c000 - 000176c000]         BOOTMEM
  #51 [000176c000 - 00017ac000]         BOOTMEM
  #52 [0000017800 - 000001f800]         BOOTMEM
Memory: 3852428k/5505024k available (2610k kernel code, 1443716k absent, 208880k reserved, 3773k data, 452k init)
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352 nr_irqs:512
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 2586.277 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5172.55 BogoMIPS (lpj=10345108)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
tseg: 00a7f00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
Freeing SMP alternatives: 12k freed
Unpacking initramfs...
Freeing initrd memory: 6184k freed
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
Booting Node   0, Processors  #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (10346.26 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 00000000b0000000 aka 2816M
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [c8000000, cfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [b0000000, c7ffffff]
TOM2: 0000000150000000 aka 5376M
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0xb0000000-0xefffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0xf0000000-0xffffffff]
bus: 00 index 4 [mem 0x150000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0xe0000000-0xe00fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe00fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d1fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d2000-0x000d3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci 0000:00:12.0: reg 10: [io  0x8440-0x8447]
pci 0000:00:12.0: reg 14: [io  0x8430-0x8433]
pci 0000:00:12.0: reg 18: [io  0x8420-0x8427]
pci 0000:00:12.0: reg 1c: [io  0x8410-0x8413]
pci 0000:00:12.0: reg 20: [io  0x8400-0x840f]
pci 0000:00:12.0: reg 24: [mem 0xc0000000-0xc00001ff]
pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:13.0: reg 10: [mem 0xc0001000-0xc0001fff]
pci 0000:00:13.1: reg 10: [mem 0xc0002000-0xc0002fff]
pci 0000:00:13.2: reg 10: [mem 0xc0003000-0xc0003fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: reg 10: [io  0x8450-0x845f]
pci 0000:00:14.0: reg 14: [mem 0xc0000400-0xc00007ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]
pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]
pci 0000:00:14.1: reg 18: [io  0x0170-0x0177]
pci 0000:00:14.1: reg 1c: [io  0x0374-0x0377]
pci 0000:00:14.1: reg 20: [io  0x8460-0x846f]
pci 0000:00:14.5: reg 10: [mem 0xc0000800-0xc00008ff]
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
pci 0000:01:05.0: reg 18: [mem 0xc0100000-0xc010ffff]
pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:02:04.0: reg 10: [io  0xa000-0xa07f]
pci 0000:02:04.0: reg 14: [mem 0xc0200000-0xc020007f]
pci 0000:02:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:04.0: supports D1 D2
pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 02-07] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xb0000000-0xefffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x150000000-0xfcffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 00000000a7e90000 - 00000000a7ffffff 
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [io  0x1080] has been reserved
system 00:08: [io  0x0220-0x022f] has been reserved
system 00:08: [io  0x0290-0x0297] has been reserved
system 00:08: [io  0x040b] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x04d6] has been reserved
system 00:08: [io  0x0530-0x0537] has been reserved
system 00:08: [io  0x0c00-0x0c01] has been reserved
system 00:08: [io  0x0c14] has been reserved
system 00:08: [io  0x0c50-0x0c52] has been reserved
system 00:08: [io  0x0c6c] has been reserved
system 00:08: [io  0x0c6f] has been reserved
system 00:08: [io  0x0cd4-0x0cd5] has been reserved
system 00:08: [io  0x0cd6-0x0cd7] has been reserved
system 00:08: [io  0x0cd8-0x0cdf] has been reserved
system 00:08: [io  0x8000-0x805f] has been reserved
system 00:08: [io  0x8100-0x81ff window] has been reserved
system 00:08: [io  0x8200-0x82ff window] has been reserved
system 00:08: [io  0x0f40-0x0f47] has been reserved
system 00:08: [io  0x087f] has been reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
Switching to clocksource acpi_pm
pci 0000:00:14.4: BAR 9: assigned [mem 0xb0000000-0xb00fffff pref]
pci 0000:00:12.0: BAR 6: assigned [mem 0xb0100000-0xb017ffff pref]
pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:02:04.0: BAR 6: assigned [mem 0xb0000000-0xb001ffff pref]
pci 0000:00:14.4: PCI bridge to [bus 02-07]
pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
pci 0000:00:14.4:   bridge window [mem 0xb0000000-0xb00fffff pref]
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0xb0000000-0xefffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: resource 8 [mem 0x150000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc02fffff]
pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb00fffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0xb0000000-0xefffffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0xf0000000-0xffffffff]
pci_bus 0000:02: resource 8 [mem 0x150000000-0xfcffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1916
io scheduler noop registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xc8000000, mapped to 0xffffc90000200000, using 5120k, total 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ÿ00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Freeing unused kernel memory: 452k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 640k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ACPI: No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
sata_sil 0000:00:12.0: version 2.4
sata_sil 0000:00:12.0: enabling device (0005 -> 0007)
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xc0000000 tf 0xc0000080 irq 22
ata2: SATA max UDMA/100 mmio m512@0xc0000000 tf 0xc00000c0 irq 22
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: ST-ATA: DRQ=0 without device error, dev_stat 0x50
ata1.00: NODEV after polling detection
ata2: SATA link down (SStatus 0 SControl 300)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (21 C)
ACPI: acpi_idle registered with cpuidle
udev: starting version 146
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
rtc_cmos 00:04: RTC can wake from S4
pata_atiixp 0000:00:14.1: setting latency timer to 64
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
scsi2 : pata_atiixp
scsi3 : pata_atiixp
ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0003000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
ata3.00: ATA-7: SAMSUNG SP1614N, TM100-24, max UDMA/100
ata3.00: 312581808 sectors, multi 16: LBA48 
ata3.01: ATAPI: TOSHIBA DVD-ROM SD-M1912, TM00, max UDMA/33
ata3.00: limited to UDMA/33 due to 40-wire cable
ata3.00: configured for UDMA/33
ata3.01: configured for UDMA/33
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP1614N  TM10 PQ: 0 ANSI: 5
scsi 2:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1912 TM00 PQ: 0 ANSI: 5
usb usb1: Manufacturer: Linux 2.6.35.3-2010-08-19-jb ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
hub 1-0:1.0: USB hub found
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
hub 1-0:1.0: 8 ports detected
sd 2:0:0:0: [sda] Attached SCSI disk
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0001000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35.3-2010-08-19-jb ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0002000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35.3-2010-08-19-jb ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
sd 2:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.
machine restart