[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-server (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 09:17:34 UTC 2010 (Ubuntu 2.6.32-21.32-server 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-server root=/dev/mapper/zoom--storage--srv0-root ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 120000000 mask FF0000000 write-back [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] modified: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] modified: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] modified: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff80000 page 4k [ 0.000000] kernel direct mapping tables up to cff80000 @ 10000-16000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000 [ 0.000000] RAMDISK: 3750b000 - 37fefb03 [ 0.000000] ACPI: RSDP 00000000000fbb10 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff80100 0005C (v01 A_M_I_ OEMXSDT 07000930 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 A_M_I_ OEMFACP 07000930 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff80440 09004 (v01 A1430 A1430001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff8e000 00040 [ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 07000930 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 07000930 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 07000930 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff89450 00038 (v01 A_M_I_ OEMHPET 07000930 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000cff89490 000B0 (v01 A_M_I_ OEMOSFR 07000930 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff8e650 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 000000000003ffff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a46ea4] TEXT DATA BSS ==> [0001000000 - 0001a46ea4] [ 0.000000] #3 [003750b000 - 0037fefb03] RAMDISK ==> [003750b000 - 0037fefb03] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a47000 - 0001a47288] BRK ==> [0001a47000 - 0001a47288] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001c00000-ffff8800055fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048335 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 [ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005800000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031207 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-server root=/dev/mapper/zoom--storage--srv0-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff88000599e000 - ffff88000999e000 [ 0.000000] software IO TLB at phys 0x599e000 - 0x999e000 [ 0.000000] Memory: 4045416k/4980736k available (5499k kernel code, 787396k absent, 147924k reserved, 3081k data, 796k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3329.572 MHz processor. [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6659.14 BogoMIPS (lpj=33295720) [ 0.000028] Security Framework initialized [ 0.000044] AppArmor: AppArmor initialized [ 0.000292] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011706] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012532] Mount-cache hash table entries: 256 [ 0.012646] Initializing cgroup subsys ns [ 0.012650] Initializing cgroup subsys cpuacct [ 0.012653] Initializing cgroup subsys memory [ 0.012659] Initializing cgroup subsys devices [ 0.012661] Initializing cgroup subsys freezer [ 0.012662] Initializing cgroup subsys net_cls [ 0.012678] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012680] CPU: L2 cache: 6144K [ 0.012683] CPU 0/0x0 -> Node 0 [ 0.012685] CPU: Physical Processor ID: 0 [ 0.012686] CPU: Processor Core ID: 0 [ 0.012688] mce: CPU supports 6 MCE banks [ 0.012694] CPU0: Thermal monitoring enabled (TM2) [ 0.012697] using mwait in idle threads. [ 0.012699] Performance Events: Core2 events, Intel PMU driver. [ 0.012703] ... version: 2 [ 0.012704] ... bit width: 40 [ 0.012705] ... generic registers: 2 [ 0.012706] ... value mask: 000000ffffffffff [ 0.012707] ... max period: 000000007fffffff [ 0.012708] ... fixed-purpose events: 3 [ 0.012709] ... event mask: 0000000700000003 [ 0.015001] ACPI: Core revision 20090903 [ 0.025710] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.025714] ftrace: allocating 22808 entries in 90 pages [ 0.030038] Setting APIC routing to flat [ 0.030330] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.132701] CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz stepping 0a [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.290054] CPU1: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz stepping 0a [ 0.290058] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300014] Brought up 2 CPUs [ 0.300016] Total of 2 processors activated (13319.08 BogoMIPS). [ 0.300721] CPU0 attaching sched-domain: [ 0.300724] domain 0: span 0-1 level MC [ 0.300725] groups: 0 1 [ 0.300730] CPU1 attaching sched-domain: [ 0.300731] domain 0: span 0-1 level MC [ 0.300733] groups: 1 0 [ 0.300809] devtmpfs: initialized [ 0.301777] regulator: core version 0.5 [ 0.301777] Time: 5:39:41 Date: 08/15/10 [ 0.301777] NET: Registered protocol family 16 [ 0.301777] ACPI: bus type pci registered [ 0.301777] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.301777] PCI: Not using MMCONFIG. [ 0.301777] PCI: Using configuration type 1 for base access [ 0.301777] Trying to unpack rootfs image as initramfs... [ 0.310043] bio: create slab at 0 [ 0.310610] ACPI: EC: Look up EC in DSDT [ 0.312351] ACPI: Executed 1 blocks of module-level executable AML code [ 0.320434] ACPI: Interpreter enabled [ 0.320437] ACPI: (supports S0 S1 S3 S4 S5) [ 0.320454] ACPI: Using IOAPIC for interrupt routing [ 0.320493] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.322320] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.326929] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.332378] ACPI Warning: Incorrect checksum in table [OEMB] - B2, should be B1 (20090903/tbutils-314) [ 0.332478] ACPI: No dock devices found. [ 0.332565] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.332636] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.332638] pci 0000:00:01.0: PME# disabled [ 0.332692] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] [ 0.332747] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] [ 0.332800] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] [ 0.332858] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff] [ 0.332901] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.332904] pci 0000:00:1a.7: PME# disabled [ 0.332935] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff] [ 0.332968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.332970] pci 0000:00:1b.0: PME# disabled [ 0.333017] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.333020] pci 0000:00:1c.0: PME# disabled [ 0.333071] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.333074] pci 0000:00:1c.4: PME# disabled [ 0.333123] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.333126] pci 0000:00:1c.5: PME# disabled [ 0.333168] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] [ 0.333221] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] [ 0.333277] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] [ 0.333334] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff] [ 0.333377] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.333380] pci 0000:00:1d.7: PME# disabled [ 0.333517] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007] [ 0.333521] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03] [ 0.333525] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887] [ 0.333529] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803] [ 0.333533] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f] [ 0.333537] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f] [ 0.333572] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff] [ 0.333581] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.333617] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007] [ 0.333621] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03] [ 0.333625] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887] [ 0.333629] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803] [ 0.333633] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f] [ 0.333637] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f] [ 0.333681] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.333687] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.333694] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.333698] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.333702] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9fffff] [ 0.333748] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.333750] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff] [ 0.333754] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.333789] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff] [ 0.333836] pci 0000:03:00.0: reg 10 io port: [0xec00-0xec07] [ 0.333844] pci 0000:03:00.0: reg 14 io port: [0xe880-0xe883] [ 0.333851] pci 0000:03:00.0: reg 18 io port: [0xe800-0xe807] [ 0.333859] pci 0000:03:00.0: reg 1c io port: [0xe480-0xe483] [ 0.333866] pci 0000:03:00.0: reg 20 io port: [0xe400-0xe40f] [ 0.333879] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfebf0000-0xfebfffff] [ 0.333953] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff] [ 0.333956] pci 0000:00:1c.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.334003] pci 0000:02:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff] [ 0.334009] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f] [ 0.334061] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.334065] pci 0000:02:00.0: PME# disabled [ 0.334106] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.334108] pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.334153] pci 0000:00:1e.0: transparent bridge [ 0.334175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.334262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.334300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.334371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.334411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.334463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.345823] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.345902] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.345980] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.346060] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.346136] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.346213] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.346289] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.346365] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.346451] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.346453] vgaarb: loaded [ 0.346533] SCSI subsystem initialized [ 0.346600] libata version 3.00 loaded. [ 0.346651] usbcore: registered new interface driver usbfs [ 0.346658] usbcore: registered new interface driver hub [ 0.346676] usbcore: registered new device driver usb [ 0.346761] ACPI: WMI: Mapper loaded [ 0.346762] PCI: Using ACPI for IRQ routing [ 0.346883] NetLabel: Initializing [ 0.346884] NetLabel: domain hash size = 128 [ 0.346885] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.346894] NetLabel: unlabeled traffic allowed by default [ 0.346916] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.346919] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.350173] Switching to clocksource tsc [ 0.351377] AppArmor: AppArmor Filesystem Enabled [ 0.351384] pnp: PnP ACPI init [ 0.351392] ACPI: bus type pnp registered [ 0.353481] pnp: PnP ACPI: found 15 devices [ 0.353482] ACPI: ACPI bus type pnp unregistered [ 0.353489] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.353494] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.353497] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.353499] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.353500] system 00:07: ioport range 0x500-0x57f has been reserved [ 0.353502] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.353504] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.353506] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.353507] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.353511] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved [ 0.353514] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.353516] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.353519] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.353523] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.353524] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.353528] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.353530] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved [ 0.358181] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.358183] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.358186] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe9fffff [ 0.358188] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.358191] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.358193] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.358196] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf03fffff [ 0.358199] pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff [ 0.358203] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.358205] pci 0000:00:1c.4: IO window: 0xe000-0xefff [ 0.358208] pci 0000:00:1c.4: MEM window: 0xfeb00000-0xfebfffff [ 0.358211] pci 0000:00:1c.4: PREFETCH window: 0x000000f0400000-0x000000f05fffff [ 0.358215] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.358217] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.358221] pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff [ 0.358223] pci 0000:00:1c.5: PREFETCH window: 0x000000f0600000-0x000000f07fffff [ 0.358228] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.358229] pci 0000:00:1e.0: IO window: disabled [ 0.358232] pci 0000:00:1e.0: MEM window: disabled [ 0.358234] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.358243] alloc irq_desc for 16 on node -1 [ 0.358244] alloc kstat_irqs on node -1 [ 0.358248] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.358251] pci 0000:00:01.0: setting latency timer to 64 [ 0.358256] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.358258] alloc irq_desc for 17 on node -1 [ 0.358259] alloc kstat_irqs on node -1 [ 0.358261] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.358264] pci 0000:00:1c.0: setting latency timer to 64 [ 0.358269] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.358272] pci 0000:00:1c.4: setting latency timer to 64 [ 0.358277] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.358280] pci 0000:00:1c.5: setting latency timer to 64 [ 0.358284] pci 0000:00:1e.0: setting latency timer to 64 [ 0.358288] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.358290] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.358291] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.358293] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe9fffff] [ 0.358294] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.358296] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] [ 0.358297] pci_bus 0000:04: resource 1 mem: [0xf0000000-0xf03fffff] [ 0.358299] pci_bus 0000:04: resource 2 pref mem [0xf8f00000-0xf8ffffff] [ 0.358300] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.358302] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.358303] pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff] [ 0.358304] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.358306] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.358307] pci_bus 0000:02: resource 2 pref mem [0xf0600000-0xf07fffff] [ 0.358309] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.358310] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.358333] NET: Registered protocol family 2 [ 0.358448] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.359275] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.362760] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.363203] TCP: Hash tables configured (established 524288 bind 65536) [ 0.363204] TCP reno registered [ 0.363309] NET: Registered protocol family 1 [ 0.363450] pci 0000:01:00.0: Boot video device [ 0.363625] Scanning for low memory corruption every 60 seconds [ 0.363722] audit: initializing netlink socket (disabled) [ 0.363731] type=2000 audit(1281850780.359:1): initialized [ 0.369844] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.370749] VFS: Disk quotas dquot_6.5.2 [ 0.370783] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.371158] fuse init (API version 7.13) [ 0.371212] msgmni has been set to 7901 [ 0.371348] alg: No test for stdrng (krng) [ 0.371386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.371389] io scheduler noop registered [ 0.371390] io scheduler anticipatory registered [ 0.371391] io scheduler deadline registered (default) [ 0.371417] io scheduler cfq registered [ 0.371509] alloc irq_desc for 24 on node -1 [ 0.371510] alloc kstat_irqs on node -1 [ 0.371516] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.371520] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.371590] alloc irq_desc for 25 on node -1 [ 0.371591] alloc kstat_irqs on node -1 [ 0.371596] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.371602] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.371685] alloc irq_desc for 26 on node -1 [ 0.371686] alloc kstat_irqs on node -1 [ 0.371691] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.371697] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.371774] alloc irq_desc for 27 on node -1 [ 0.371775] alloc kstat_irqs on node -1 [ 0.371779] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.371785] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.371843] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.371915] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.371999] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.372002] ACPI: Power Button [PWRB] [ 0.372032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.372033] ACPI: Power Button [PWRF] [ 0.372573] ACPI: SSDT 00000000cff8e0d0 002B9 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.372950] processor LNXCPU:00: registered as cooling_device0 [ 0.373265] ACPI: SSDT 00000000cff8e390 002B9 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.373635] processor LNXCPU:01: registered as cooling_device1 [ 0.376196] Linux agpgart interface v0.103 [ 0.376220] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.376302] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.376549] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.377209] brd: module loaded [ 0.377508] loop: module loaded [ 0.377562] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.377633] ata_piix 0000:00:1f.2: version 2.13 [ 0.377644] alloc irq_desc for 19 on node -1 [ 0.377645] alloc kstat_irqs on node -1 [ 0.377649] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.377653] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.377682] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.377734] scsi0 : ata_piix [ 0.377778] scsi1 : ata_piix [ 0.378590] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 [ 0.378594] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 [ 0.378609] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.378612] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.378635] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.378657] scsi2 : ata_piix [ 0.378688] scsi3 : ata_piix [ 0.379466] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 [ 0.379469] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 [ 0.379506] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.379526] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 0.379536] pata_acpi 0000:03:00.0: PCI INT A disabled [ 0.379740] Fixed MDIO Bus: probed [ 0.379760] PPP generic driver version 2.4.2 [ 0.379782] tun: Universal TUN/TAP device driver, 1.6 [ 0.379783] tun: (C) 1999-2004 Max Krasnyansky [ 0.379838] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.379852] alloc irq_desc for 18 on node -1 [ 0.379853] alloc kstat_irqs on node -1 [ 0.379856] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.379866] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.379869] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.379890] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.379914] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.383795] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.383805] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 0.399740] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.399825] usb usb1: configuration #1 chosen from 1 choice [ 0.399846] hub 1-0:1.0: USB hub found [ 0.399852] hub 1-0:1.0: 6 ports detected [ 0.399904] alloc irq_desc for 23 on node -1 [ 0.399905] alloc kstat_irqs on node -1 [ 0.399911] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.399929] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.399932] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.399957] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.399978] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.403846] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.403859] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 0.419732] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.419815] usb usb2: configuration #1 chosen from 1 choice [ 0.419839] hub 2-0:1.0: USB hub found [ 0.419846] hub 2-0:1.0: 6 ports detected [ 0.419895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.419911] uhci_hcd: USB Universal Host Controller Interface driver [ 0.419949] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.419956] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.419959] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.419983] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.420013] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 0.420069] usb usb3: configuration #1 chosen from 1 choice [ 0.420084] hub 3-0:1.0: USB hub found [ 0.420088] hub 3-0:1.0: 2 ports detected [ 0.420119] alloc irq_desc for 21 on node -1 [ 0.420121] alloc kstat_irqs on node -1 [ 0.420125] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.420130] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.420132] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.420153] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.420176] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 0.420234] usb usb4: configuration #1 chosen from 1 choice [ 0.420250] hub 4-0:1.0: USB hub found [ 0.420254] hub 4-0:1.0: 2 ports detected [ 0.420282] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.420286] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.420288] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.420307] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.420326] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 0.420384] usb usb5: configuration #1 chosen from 1 choice [ 0.420398] hub 5-0:1.0: USB hub found [ 0.420402] hub 5-0:1.0: 2 ports detected [ 0.420431] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.420435] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.420437] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.420465] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.420483] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 0.420538] usb usb6: configuration #1 chosen from 1 choice [ 0.420553] hub 6-0:1.0: USB hub found [ 0.420556] hub 6-0:1.0: 2 ports detected [ 0.420585] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.420588] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.420590] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.420615] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.420633] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 0.420684] usb usb7: configuration #1 chosen from 1 choice [ 0.420699] hub 7-0:1.0: USB hub found [ 0.420705] hub 7-0:1.0: 2 ports detected [ 0.420737] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.420741] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.420743] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.420760] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.420778] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 0.420831] usb usb8: configuration #1 chosen from 1 choice [ 0.420846] hub 8-0:1.0: USB hub found [ 0.420849] hub 8-0:1.0: 2 ports detected [ 0.420914] PNP: No PS/2 controller found. Probing ports directly. [ 0.423440] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.423445] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.423496] mice: PS/2 mouse device common for all mice [ 0.423562] rtc_cmos 00:03: RTC can wake from S4 [ 0.423594] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.423614] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.423691] device-mapper: uevent: version 1.0.3 [ 0.423785] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.423827] device-mapper: multipath: version 1.1.0 loaded [ 0.423829] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.423918] cpuidle: using governor ladder [ 0.423920] cpuidle: using governor menu [ 0.424166] TCP cubic registered [ 0.424240] NET: Registered protocol family 10 [ 0.424539] lo: Disabled Privacy Extensions [ 0.424709] NET: Registered protocol family 17 [ 0.425352] PM: Resume from disk failed. [ 0.425361] registered taskstats version 1 [ 0.425667] Magic number: 6:798:668 [ 0.425746] rtc_cmos 00:03: setting system clock to 2010-08-15 05:39:41 UTC (1281850781) [ 0.425748] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.425749] EDD information not available. [ 0.463247] Freeing initrd memory: 11154k freed [ 0.740224] ata3: SATA link down (SStatus 0 SControl 300) [ 0.750832] ata4: SATA link down (SStatus 0 SControl 300) [ 1.090627] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.090637] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.110625] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1.110635] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.110669] Freeing unused kernel memory: 796k freed [ 1.110909] Write protecting the kernel read-only data: 7788k [ 1.120615] udev: starting version 151 [ 1.165709] [drm] Initialized drm 1.1.0 20060810 [ 1.166685] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.166714] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 1.168039] scsi4 : pata_jmicron [ 1.168086] scsi5 : pata_jmicron [ 1.168637] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16 [ 1.168639] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16 [ 1.169994] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.170004] ATL1E 0000:02:00.0: setting latency timer to 64 [ 1.340675] ata5.01: ATA-5: MAXTOR 6L040J2, A93.0300, max UDMA/133 [ 1.340678] ata5.01: 78177792 sectors, multi 0: LBA [ 1.380679] ata5.01: configured for UDMA/100 [ 1.380771] scsi 4:0:1:0: Direct-Access ATA MAXTOR 6L040J2 A93. PQ: 0 ANSI: 5 [ 1.380913] sd 4:0:1:0: [sda] 78177792 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.380918] sd 4:0:1:0: Attached scsi generic sg0 type 0 [ 1.380974] sd 4:0:1:0: [sda] Write Protect is off [ 1.380976] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.380992] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.381079] sda: sda1 sda2 < sda5 > [ 1.396057] sd 4:0:1:0: [sda] Attached SCSI disk [ 1.553378] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.553383] nouveau 0000:01:00.0: setting latency timer to 64 [ 1.554919] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298200a2) [ 1.555529] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 1.601954] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 1.601957] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 1.601958] [drm] nouveau 0000:01:00.0: Bios version 62.98.29.00 [ 1.601961] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 1.601962] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 1.601964] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 1.601966] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 1.601968] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [ 1.601969] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028 [ 1.601971] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000030 [ 1.601972] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 1.601978] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD40E [ 1.700113] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD785 [ 1.760007] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE02B [ 1.760014] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE11D [ 1.790080] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE2F9 [ 1.790083] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE35E [ 1.810010] [drm] nouveau 0000:01:00.0: 0xE35E: Condition still not met after 20ms, skipping following opcodes [ 1.810017] [drm] nouveau 0000:01:00.0: 0xC3D8: parsing output script 0 [ 1.880149] [TTM] Zone kernel: Available graphics memory: 2028684 kiB. [ 1.880159] [drm] nouveau 0000:01:00.0: 512 MiB VRAM [ 1.893518] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 1.893524] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1.893660] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 1.896408] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 1.896856] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 1.896860] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 1.896861] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 1.896863] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 1.896896] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 2.068650] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40250000, bo ffff880126870600 [ 2.068695] fb0: nouveaufb frame buffer device [ 2.068697] registered panic notifier [ 2.068701] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 2.069703] vga16fb: initializing [ 2.069705] vga16fb: mapped to 0xffff8800000a0000 [ 2.069707] vga16fb: not registering due to another framebuffer present [ 2.074497] Console: switching to colour frame buffer device 210x65 [ 2.076442] [drm] nouveau 0000:01:00.0: 0xC3F6: parsing output script 1 [ 2.076465] [drm] nouveau 0000:01:00.0: 0xC3F7: parsing output script 2 [ 2.076478] [drm] nouveau 0000:01:00.0: 0xC0ED: parsing clock script 0 [ 2.076766] [drm] nouveau 0000:01:00.0: 0xBA22: parsing clock script 1 [ 7.560217] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 10.086971] udev: starting version 151 [ 12.882714] lp: driver loaded but no devices found [ 13.560962] alloc irq_desc for 22 on node -1 [ 13.560964] alloc kstat_irqs on node -1 [ 13.560969] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.561013] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.688651] type=1505 audit(1281850794.754:2): operation="profile_load" pid=657 name="/sbin/dhclient3" [ 13.688713] type=1505 audit(1281850794.754:3): operation="profile_load" pid=657 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.688754] type=1505 audit(1281850794.754:4): operation="profile_load" pid=657 name="/usr/lib/connman/scripts/dhclient-script" [ 13.801549] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 [ 14.504878] alloc irq_desc for 28 on node -1 [ 14.504881] alloc kstat_irqs on node -1 [ 14.504893] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X [ 14.505029] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 14.505325] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.505570] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.259457] type=1505 audit(1281850796.324:5): operation="profile_replace" pid=819 name="/sbin/dhclient3" [ 15.259867] type=1505 audit(1281850796.324:6): operation="profile_replace" pid=819 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.260099] type=1505 audit(1281850796.334:7): operation="profile_replace" pid=819 name="/usr/lib/connman/scripts/dhclient-script" [ 15.358095] type=1505 audit(1281850796.424:8): operation="profile_load" pid=823 name="/usr/sbin/tcpdump" [ 19.916351] Intel AES-NI instructions are not detected. [ 20.000850] padlock: VIA PadLock not detected. [ 20.078923] padlock: VIA PadLock Hash Engine not detected. [ 21.537397] Adding 1642488k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:1642488k [ 25.340029] eth0: no IPv6 routers present