From mboxrd@z Thu Jan 1 00:00:00 1970 From: Harri Olin Subject: ata device numbers Date: Sat, 9 Oct 2010 20:08:44 +0300 Message-ID: <4CB0A19C.20604@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from emh02.mail.saunalahti.fi ([62.142.5.108]:38203 "EHLO emh02.mail.saunalahti.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760304Ab0JIRRe (ORCPT ); Sat, 9 Oct 2010 13:17:34 -0400 Received: from saunalahti-vams (vs3-12.mail.saunalahti.fi [62.142.5.96]) by emh02-2.mail.saunalahti.fi (Postfix) with SMTP id 76D88EF878 for ; Sat, 9 Oct 2010 20:08:46 +0300 (EEST) Received: from JPCSRV01.JPC.local (ip212-226-155-81.adsl.kpnqwest.fi [212.226.155.81]) by emh06.mail.saunalahti.fi (Postfix) with ESMTP id 498D8E51A3 for ; Sat, 9 Oct 2010 20:08:45 +0300 (EEST) Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: "linux-ide@vger.kernel.org" Hi At the end of dmesg, there is an error on device ata13. Can someone tell which scsi device number or /dev/ name it refers to? Is there any reliable way to determine the ata number for devices? --- Linux version 2.6.32.2 (root@mizar) (gcc version 4.2.3) #1 SMP Mon Jan 4 04:22:34 EET 2010 Command line: BOOT_IMAGE=Linux ro root=805 vt.default_utf8=0 netconsole=6665@192.168.11.9/eth1,6666@192.168.11.23/00:50:da:b7:ce:39 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe70000 (usable) BIOS-e820: 00000000cfe70000 - 00000000cfe7e000 (ACPI data) BIOS-e820: 00000000cfe7e000 - 00000000cfe81000 (ACPI NVS) BIOS-e820: 00000000cfe81000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x230000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0D0000000 mask FF0000000 uncachable 1 base 0E0000000 mask FE0000000 uncachable 2 base 000000000 mask E00000000 write-back 3 base 200000000 mask FE0000000 write-back 4 base 220000000 mask FF0000000 write-back 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfe70 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cfe70000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cfe70000 page 4k kernel direct mapping tables up to cfe70000 @ 10000-16000 init_memory_mapping: 0000000100000000-0000000230000000 0100000000 - 0230000000 page 2M kernel direct mapping tables up to 230000000 @ 14000-1e000 ACPI: RSDP 00000000000f6530 00024 (v02 PTLTD ) ACPI: XSDT 00000000cfe73154 000CC (v01 PTLTD ? XSDT 06040000 LTP 00000000) ACPI: FACP 00000000cfe7d307 000F4 (v03 INTEL 06040000 PTL 00000002) ACPI: DSDT 00000000cfe76dec 064A7 (v01 INTEL BEARLAKE 06040000 MSFT 03000001) ACPI: FACS 00000000cfe80fc0 00040 ACPI: _MAR 00000000cfe7d3fb 0012F (v01 Intel OEMDMAR 06040000 LOHR 00000001) ACPI: MCFG 00000000cfe7d52a 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: HPET 00000000cfe7d566 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) ACPI: APIC 00000000cfe7d59e 0009C (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 00000000cfe7d63a 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SPCR 00000000cfe7d662 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) ACPI: ERST 00000000cfe7d6b2 00590 (v01 SMCI ERSTTBL 06040000 SMCI 00000001) ACPI: HEST 00000000cfe7dc42 000A8 (v01 SMCI HESTTBL 06040000 SMCI 00000001) ACPI: BERT 00000000cfe7dcea 00030 (v01 SMCI BERTTBL 06040000 SMCI 00000001) ACPI: EINJ 00000000cfe7dd1a 00170 (v01 SMCI EINJTBL 06040000 SMCI 00000001) ACPI: SLIC 00000000cfe7de8a 00176 (v01 OEMID_ OEMTABLE 06040000 LTP 00000000) ACPI: SSDT 00000000cfe74a93 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe749ed 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe74947 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe748a1 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe747fb 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe74755 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe746af 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe74609 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe73220 013E9 (v01 PmRef CpuPm 00003000 INTL 20050228) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0230000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001833654] TEXT DATA BSS ==> [0001000000 - 0001833654] #3 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000] #4 [0001834000 - 00018341a4] BRK ==> [0001834000 - 00018341a4] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #6 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000] found SMP MP-table at [ffff8800000f6560] f6560 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009b 0: 0x00000100 -> 0x000cfe70 0: 0x00100000 -> 0x00230000 On node 0 totalpages: 2096635 DMA zone: 56 pages used for memmap DMA zone: 112 pages reserved DMA zone: 3811 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833192 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 32, address 0xfecc0000, GSI 24-47 ACPI: IOAPIC (id[0x06] address[0xfecc0400] gsi_base[48]) IOAPIC[2]: apic_id 6, version 32, address 0xfecc0400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 72 Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79768 r8192 d22632 u524288 pcpu-alloc: s79768 r8192 d22632 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065163 Kernel command line: BOOT_IMAGE=Linux ro root=805 vt.default_utf8=0 netconsole=6665@192.168.11.9/eth1,6666@192.168.11.23/00:50:da:b7:ce:39 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 8181488k/9175040k available (4667k kernel code, 788500k absent, 204116k reserved, 2447k data, 464k init) Hierarchical RCU implementation. NR_IRQS:512 Extended CMOS year: 2000 Console: colour VGA+ 80x50 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2825.893 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5651.78 BogoMIPS (lpj=2825893) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5652.46 BogoMIPS (lpj=2826230) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring handled by SMI CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5652.48 BogoMIPS (lpj=2826240) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: Thermal monitoring handled by SMI CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5652.48 BogoMIPS (lpj=2826242) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring handled by SMI CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (22609.21 BogoMIPS). xor: automatically using best checksumming function: generic_sse generic_sse: 10784.000 MB/sec xor: using function: generic_sse (10784.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 16 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e10fffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI Warning for \_SB_.PCI0._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) _OSC evaluation returned wrong type ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000400-0xd00007ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 0097) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 00af) pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0000800-0xd0000fff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xd0001000-0xd00010ff] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] pci 0000:00:1f.6: reg 10 64bit mmio: [0xd0002000-0xd0002fff] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.1: reg 10 32bit mmio: [0xd0100000-0xd0100fff] pci 0000:01:00.2: PXH quirk detected; SHPC device MSI disabled pci 0000:01:00.2: PME# supported from D0 D3hot D3cold pci 0000:01:00.2: PME# disabled pci 0000:01:00.3: reg 10 32bit mmio: [0xd0101000-0xd0101fff] pci 0000:00:01.0: bridge io port: [0x2000-0x3fff] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd13fffff] pci 0000:02:01.0: reg 10 64bit mmio: [0xd0200000-0xd02fffff] pci 0000:02:01.0: reg 18 io port: [0x2000-0x20ff] pci 0000:02:01.0: reg 1c 64bit mmio: [0xd0400000-0xd07fffff] pci 0000:02:01.0: reg 30 32bit mmio pref: [0x000000-0x3fffff] pci 0000:01:00.0: bridge io port: [0x2000-0x2fff] pci 0000:01:00.0: bridge 32bit mmio: [0xd0200000-0xd07fffff] pci 0000:03:01.0: reg 10 64bit mmio: [0xd0c00000-0xd0cfffff] pci 0000:03:01.0: reg 18 io port: [0x3000-0x30ff] pci 0000:03:01.0: reg 1c 64bit mmio: [0xd0800000-0xd0bfffff] pci 0000:03:01.0: reg 30 32bit mmio pref: [0x000000-0x3fffff] pci 0000:03:02.0: reg 10 64bit mmio: [0xd0d00000-0xd0dfffff] pci 0000:03:02.0: reg 18 io port: [0x3400-0x34ff] pci 0000:03:02.0: reg 1c 64bit mmio: [0xd1000000-0xd13fffff] pci 0000:03:02.0: reg 30 32bit mmio pref: [0x000000-0x3fffff] pci 0000:01:00.2: bridge io port: [0x3000-0x3fff] pci 0000:01:00.2: bridge 32bit mmio: [0xd0800000-0xd13fffff] pci 0000:04:00.0: reg 10 32bit mmio: [0xd1420000-0xd143ffff] pci 0000:04:00.0: reg 14 32bit mmio: [0xd1600000-0xd17fffff] pci 0000:04:00.0: reg 18 io port: [0x4000-0x401f] pci 0000:04:00.0: reg 1c 32bit mmio: [0xd1400000-0xd1403fff] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x1fffff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.1: reg 10 32bit mmio: [0xd1440000-0xd145ffff] pci 0000:04:00.1: reg 14 32bit mmio: [0xd1800000-0xd19fffff] pci 0000:04:00.1: reg 18 io port: [0x4020-0x403f] pci 0000:04:00.1: reg 1c 32bit mmio: [0xd1404000-0xd1407fff] pci 0000:04:00.1: reg 30 32bit mmio pref: [0x000000-0x1fffff] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold pci 0000:04:00.1: PME# disabled pci 0000:00:06.0: bridge io port: [0x4000-0x4fff] pci 0000:00:06.0: bridge 32bit mmio: [0xd1400000-0xd19fffff] pci 0000:0d:00.0: reg 10 32bit mmio: [0xd1a00000-0xd1a1ffff] pci 0000:0d:00.0: reg 18 io port: [0x5000-0x501f] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold pci 0000:0d:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xd1a00000-0xd1afffff] pci 0000:0f:00.0: reg 10 32bit mmio: [0xd1b00000-0xd1b1ffff] pci 0000:0f:00.0: reg 18 io port: [0x6000-0x601f] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold pci 0000:0f:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0x6000-0x6fff] pci 0000:00:1c.5: bridge 32bit mmio: [0xd1b00000-0xd1bfffff] pci 0000:11:04.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:11:04.0: reg 14 io port: [0x7000-0x70ff] pci 0000:11:04.0: reg 18 32bit mmio: [0xd1c00000-0xd1c0ffff] pci 0000:11:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:11:04.0: supports D1 D2 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x7000-0x7fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd1c00000-0xd1cfffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] _OSC evaluation returned wrong type ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) vgaarb: device added: PCI:0000:11:04.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 2253 MB/s raid6: int64x2 2980 MB/s raid6: int64x4 3125 MB/s raid6: int64x8 2046 MB/s raid6: sse2x1 4632 MB/s raid6: sse2x2 5191 MB/s raid6: sse2x4 8136 MB/s raid6: using algorithm sse2x4 (8136 MB/s) PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x295-0x296 has been reserved system 00:01: ioport range 0x800-0x80f has been reserved system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1180-0x11bf has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0xfe00-0xfe00 has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: 0x2000-0x2fff pci 0000:01:00.0: MEM window: 0xd0200000-0xd07fffff pci 0000:01:00.0: PREFETCH window: 0xd2000000-0xd23fffff pci 0000:01:00.2: PCI bridge, secondary bus 0000:03 pci 0000:01:00.2: IO window: 0x3000-0x3fff pci 0000:01:00.2: MEM window: 0xd0800000-0xd13fffff pci 0000:01:00.2: PREFETCH window: 0xd2400000-0xd2bfffff pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x3fff pci 0000:00:01.0: MEM window: 0xd0100000-0xd13fffff pci 0000:00:01.0: PREFETCH window: 0xd2000000-0xd2bfffff pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 pci 0000:00:06.0: IO window: 0x4000-0x4fff pci 0000:00:06.0: MEM window: 0xd1400000-0xd19fffff pci 0000:00:06.0: PREFETCH window: 0xd2c00000-0xd2ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.0: IO window: 0x8000-0x8fff pci 0000:00:1c.0: MEM window: 0xd1d00000-0xd1efffff pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d31fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.4: IO window: 0x5000-0x5fff pci 0000:00:1c.4: MEM window: 0xd1a00000-0xd1afffff pci 0000:00:1c.4: PREFETCH window: 0x000000d3200000-0x000000d33fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0f pci 0000:00:1c.5: IO window: 0x6000-0x6fff pci 0000:00:1c.5: MEM window: 0xd1b00000-0xd1bfffff pci 0000:00:1c.5: PREFETCH window: 0x000000d3400000-0x000000d35fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11 pci 0000:00:1e.0: IO window: 0x7000-0x7fff pci 0000:00:1e.0: MEM window: 0xd1c00000-0xd1cfffff pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:01:00.0: setting latency timer to 64 pci 0000:01:00.2: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0040 -> 0043) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x3fff] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd13fffff] pci_bus 0000:01: resource 2 pref mem [0xd2000000-0xd2bfffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd07fffff] pci_bus 0000:02: resource 2 pref mem [0xd2000000-0xd23fffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xd0800000-0xd13fffff] pci_bus 0000:03: resource 2 pref mem [0xd2400000-0xd2bfffff] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] pci_bus 0000:04: resource 1 mem: [0xd1400000-0xd19fffff] pci_bus 0000:04: resource 2 pref mem [0xd2c00000-0xd2ffffff] pci_bus 0000:05: resource 0 io: [0x8000-0x8fff] pci_bus 0000:05: resource 1 mem: [0xd1d00000-0xd1efffff] pci_bus 0000:05: resource 2 pref mem [0xd3000000-0xd31fffff] pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff] pci_bus 0000:0d: resource 1 mem: [0xd1a00000-0xd1afffff] pci_bus 0000:0d: resource 2 pref mem [0xd3200000-0xd33fffff] pci_bus 0000:0f: resource 0 io: [0x6000-0x6fff] pci_bus 0000:0f: resource 1 mem: [0xd1b00000-0xd1bfffff] pci_bus 0000:0f: resource 2 pref mem [0xd3400000-0xd35fffff] pci_bus 0000:11: resource 0 io: [0x7000-0x7fff] pci_bus 0000:11: resource 1 mem: [0xd1c00000-0xd1cfffff] pci_bus 0000:11: resource 2 pref mem [0xd8000000-0xdfffffff] pci_bus 0000:11: resource 3 io: [0x00-0xffff] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:04:00.0: Disabling L0s pci 0000:04:00.1: Disabling L0s pci 0000:11:04.0: Boot video device Simple Boot Flag at 0x36 set to 0x80 HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Slow work thread pool: Starting up Slow work thread pool: Ready SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 15981 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 72 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:06.0: irq 73 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 74 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.4: irq 75 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.5: irq 76 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] ACPI: SSDT 00000000cfe755ad 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228) ACPI: SSDT 00000000cfe74cf2 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) Monitor-Mwait will be used to enter C-1 state processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT 00000000cfe7580e 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228) ACPI: SSDT 00000000cfe7520a 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228) processor LNXCPU:01: registered as cooling_device1 ACPI: SSDT 00000000cfe75a00 001F2 (v01 PmRef Cpu2Ist 00003000 INTL 20050228) ACPI: SSDT 00000000cfe7528f 00085 (v01 PmRef Cpu2Cst 00003000 INTL 20050228) processor LNXCPU:02: registered as cooling_device2 ACPI: SSDT 00000000cfe75bf2 001F2 (v01 PmRef Cpu3Ist 00003000 INTL 20050228) ACPI: SSDT 00000000cfe75314 00085 (v01 PmRef Cpu3Cst 00003000 INTL 20050228) processor LNXCPU:03: registered as cooling_device3 Linux agpgart interface v0.103 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x0028c5, prod_id: 0x0004, dev_id: 0x22) IPMI kcs interface initialized Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A floppy0: no floppy controllers found brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: irq 77 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 77 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed sata_mv 0000:02:01.0: version 1.28 sata_mv 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 sata_mv 0000:02:01.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx scsi6 : sata_mv scsi7 : sata_mv scsi8 : sata_mv scsi9 : sata_mv scsi10 : sata_mv scsi11 : sata_mv scsi12 : sata_mv scsi13 : sata_mv ata7: SATA max UDMA/133 mmio m1048576@0xd0200000 port 0xd0222000 irq 24 ata8: SATA max UDMA/133 mmio m1048576@0xd0200000 port 0xd0224000 irq 24 ata9: SATA max UDMA/133 mmio m1048576@0xd0200000 port 0xd0226000 irq 24 ata10: SATA max UDMA/133 mmio m1048576@0xd0200000 port 0xd0228000 irq 24 ata11: SATA max UDMA/133 mmio m1048576@0xd0200000 port 0xd0232000 irq 24 ata12: SATA max UDMA/133 mmio m1048576@0xd0200000 port 0xd0234000 irq 24 ata13: SATA max UDMA/133 mmio m1048576@0xd0200000 port 0xd0236000 irq 24 ata14: SATA max UDMA/133 mmio m1048576@0xd0200000 port 0xd0238000 irq 24 sata_mv 0000:03:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48 sata_mv 0000:03:01.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx scsi14 : sata_mv scsi15 : sata_mv scsi16 : sata_mv scsi17 : sata_mv scsi18 : sata_mv scsi19 : sata_mv scsi20 : sata_mv scsi21 : sata_mv ata15: SATA max UDMA/133 mmio m1048576@0xd0c00000 port 0xd0c22000 irq 48 ata16: SATA max UDMA/133 mmio m1048576@0xd0c00000 port 0xd0c24000 irq 48 ata17: SATA max UDMA/133 mmio m1048576@0xd0c00000 port 0xd0c26000 irq 48 ata18: SATA max UDMA/133 mmio m1048576@0xd0c00000 port 0xd0c28000 irq 48 ata19: SATA max UDMA/133 mmio m1048576@0xd0c00000 port 0xd0c32000 irq 48 ata20: SATA max UDMA/133 mmio m1048576@0xd0c00000 port 0xd0c34000 irq 48 ata21: SATA max UDMA/133 mmio m1048576@0xd0c00000 port 0xd0c36000 irq 48 ata22: SATA max UDMA/133 mmio m1048576@0xd0c00000 port 0xd0c38000 irq 48 sata_mv 0000:03:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 sata_mv 0000:03:02.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx scsi22 : sata_mv scsi23 : sata_mv scsi24 : sata_mv scsi25 : sata_mv scsi26 : sata_mv scsi27 : sata_mv scsi28 : sata_mv scsi29 : sata_mv ata23: SATA max UDMA/133 mmio m1048576@0xd0d00000 port 0xd0d22000 irq 52 ata24: SATA max UDMA/133 mmio m1048576@0xd0d00000 port 0xd0d24000 irq 52 ata25: SATA max UDMA/133 mmio m1048576@0xd0d00000 port 0xd0d26000 irq 52 ata26: SATA max UDMA/133 mmio m1048576@0xd0d00000 port 0xd0d28000 irq 52 ata27: SATA max UDMA/133 mmio m1048576@0xd0d00000 port 0xd0d32000 irq 52 ata28: SATA max UDMA/133 mmio m1048576@0xd0d00000 port 0xd0d34000 irq 52 ata29: SATA max UDMA/133 mmio m1048576@0xd0d00000 port 0xd0d36000 irq 52 ata30: SATA max UDMA/133 mmio m1048576@0xd0d00000 port 0xd0d38000 irq 52 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: local port 6665 netconsole: local IP 192.168.11.9 netconsole: interface eth1 netconsole: remote port 6666 netconsole: remote IP 192.168.11.23 netconsole: remote ethernet address 00:50:da:b7:ce:39 netconsole: eth1 doesn't exist, aborting. netconsole: cleaning up ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0000000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver oprofile: using NMI interrupt. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully TCP cubic registered NET: Registered protocol family 17 rtc_cmos 00:05: setting system clock to 2010-10-09 15:03:24 UTC (1286636604) ata15: SATA link down (SStatus 0 SControl 300) usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice ata23: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata23.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata23.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata23.00: configured for UDMA/133 usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: configuration #1 chosen from 1 choice input: Peppercon AG Multidevice as /class/input/input2 generic-usb 0003:14DD:0002.0001: input: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1a.7-5/input0 input: Peppercon AG Multidevice as /class/input/input3 generic-usb 0003:14DD:0002.0002: input: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1a.7-5/input1 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: WDC WD800AAJS-22PSA0, 05.06H05, max UDMA/133 ata6.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata6.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata6.00: configured for UDMA/133 ata2.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata1.00: configured for UDMA/133 ata3.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA scsi 0:0:0:0: Direct-Access ATA WDC WD800AAJS-22 05.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 ata4.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 1:0:0:0: [sdb] Write Protect is off ata4.00: configured for UDMA/133 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: Attached scsi generic sg1 type 0 sdb: scsi 2:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 2:0:0:0: Attached scsi generic sg2 type 0 scsi 3:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: Attached scsi generic sg3 type 0 sdd: sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sda1 sda2 sda3 < sdb1 sdc1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sdc] Attached SCSI disk sdd1 sd 3:0:0:0: [sdd] Attached SCSI disk sda5 sda6 ata5.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata5.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata5.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 4:0:0:0: Attached scsi generic sg4 type 0 scsi 5:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 5:0:0:0: [sdf] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: Attached scsi generic sg5 type 0 sdf: sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sda7 sde1 sd 4:0:0:0: [sde] Attached SCSI disk sdf1 sd 5:0:0:0: [sdf] Attached SCSI disk sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk ata7: link is slow to respond, please be patient (ready=0) ata7: SRST failed (errno=-16) ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata7.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata7.00: configured for UDMA/133 scsi 6:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 6:0:0:0: [sdg] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 6:0:0:0: Attached scsi generic sg6 type 0 sd 6:0:0:0: [sdg] Write Protect is off sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sd 6:0:0:0: [sdg] Attached SCSI disk ata8: link is slow to respond, please be patient (ready=0) ata8: SRST failed (errno=-16) ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata8.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata8.00: configured for UDMA/133 scsi 7:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 7:0:0:0: [sdh] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 7:0:0:0: [sdh] Write Protect is off sd 7:0:0:0: Attached scsi generic sg7 type 0 sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdh: sdh1 sd 7:0:0:0: [sdh] Attached SCSI disk ata9: link is slow to respond, please be patient (ready=0) ata9: SRST failed (errno=-16) ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata9.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata9.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata9.00: configured for UDMA/133 scsi 8:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 8:0:0:0: [sdi] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 8:0:0:0: Attached scsi generic sg8 type 0 sd 8:0:0:0: [sdi] Write Protect is off sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdi: sdi1 sd 8:0:0:0: [sdi] Attached SCSI disk ata10: link is slow to respond, please be patient (ready=0) ata10: SRST failed (errno=-16) ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata10.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata10.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata10.00: configured for UDMA/133 scsi 9:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 9:0:0:0: [sdj] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 9:0:0:0: Attached scsi generic sg9 type 0 sd 9:0:0:0: [sdj] Write Protect is off sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00 sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdj: sdj1 sd 9:0:0:0: [sdj] Attached SCSI disk ata11: link is slow to respond, please be patient (ready=0) ata11: SRST failed (errno=-16) ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata11.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata11.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata11.00: configured for UDMA/133 scsi 10:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 10:0:0:0: [sdk] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 10:0:0:0: Attached scsi generic sg10 type 0 sd 10:0:0:0: [sdk] Write Protect is off sd 10:0:0:0: [sdk] Mode Sense: 00 3a 00 00 sd 10:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdk: sdk1 sd 10:0:0:0: [sdk] Attached SCSI disk ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata12.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata12.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata12.00: configured for UDMA/133 scsi 11:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 11:0:0:0: [sdl] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 11:0:0:0: Attached scsi generic sg11 type 0 sd 11:0:0:0: [sdl] Write Protect is off sd 11:0:0:0: [sdl] Mode Sense: 00 3a 00 00 sd 11:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdl: sdl1 sd 11:0:0:0: [sdl] Attached SCSI disk ata13: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata13.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata13.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata13.00: configured for UDMA/133 scsi 12:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 12:0:0:0: [sdm] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 12:0:0:0: Attached scsi generic sg12 type 0 sd 12:0:0:0: [sdm] Write Protect is off sd 12:0:0:0: [sdm] Mode Sense: 00 3a 00 00 sd 12:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdm: sdm1 sd 12:0:0:0: [sdm] Attached SCSI disk ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata14.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 ata14.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata14.00: configured for UDMA/133 scsi 13:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 sd 13:0:0:0: [sdn] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 13:0:0:0: Attached scsi generic sg13 type 0 sd 13:0:0:0: [sdn] Write Protect is off sd 13:0:0:0: [sdn] Mode Sense: 00 3a 00 00 sd 13:0:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdn: unknown partition table sd 13:0:0:0: [sdn] Attached SCSI disk ata16: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata16.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 ata16.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata16.00: configured for UDMA/133 scsi 15:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 sd 15:0:0:0: [sdo] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 15:0:0:0: Attached scsi generic sg14 type 0 sd 15:0:0:0: [sdo] Write Protect is off sd 15:0:0:0: [sdo] Mode Sense: 00 3a 00 00 sd 15:0:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdo: unknown partition table sd 15:0:0:0: [sdo] Attached SCSI disk ata17: SATA link down (SStatus 0 SControl 300) ata18: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata18.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 ata18.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata18.00: configured for UDMA/133 scsi 17:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 sd 17:0:0:0: [sdp] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 17:0:0:0: Attached scsi generic sg15 type 0 sd 17:0:0:0: [sdp] Write Protect is off sd 17:0:0:0: [sdp] Mode Sense: 00 3a 00 00 sd 17:0:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdp: unknown partition table sd 17:0:0:0: [sdp] Attached SCSI disk ata19: SATA link down (SStatus 0 SControl 300) ata20: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata20.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 ata20.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata20.00: configured for UDMA/133 scsi 19:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 sd 19:0:0:0: [sdq] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 19:0:0:0: Attached scsi generic sg16 type 0 sd 19:0:0:0: [sdq] Write Protect is off sd 19:0:0:0: [sdq] Mode Sense: 00 3a 00 00 sd 19:0:0:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdq: unknown partition table sd 19:0:0:0: [sdq] Attached SCSI disk ata21: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata21.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 ata21.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata21.00: configured for UDMA/133 scsi 20:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 sd 20:0:0:0: [sdr] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 20:0:0:0: Attached scsi generic sg17 type 0 sd 20:0:0:0: [sdr] Write Protect is off sd 20:0:0:0: [sdr] Mode Sense: 00 3a 00 00 sd 20:0:0:0: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdr: unknown partition table sd 20:0:0:0: [sdr] Attached SCSI disk ata22: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata22.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 ata22.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata22.00: configured for UDMA/133 scsi 21:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 sd 21:0:0:0: [sds] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 21:0:0:0: Attached scsi generic sg18 type 0 scsi 22:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 22:0:0:0: [sdt] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 22:0:0:0: [sdt] Write Protect is off sd 22:0:0:0: [sdt] Mode Sense: 00 3a 00 00 sd 22:0:0:0: [sdt] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 22:0:0:0: Attached scsi generic sg19 type 0 sdt: sd 21:0:0:0: [sds] Write Protect is off sd 21:0:0:0: [sds] Mode Sense: 00 3a 00 00 sd 21:0:0:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sds: sdt1 sd 22:0:0:0: [sdt] Attached SCSI disk unknown partition table sd 21:0:0:0: [sds] Attached SCSI disk ata24: link is slow to respond, please be patient (ready=0) ata24: SRST failed (errno=-16) ata24: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata24.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata24.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata24.00: configured for UDMA/133 scsi 23:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 23:0:0:0: [sdu] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 23:0:0:0: Attached scsi generic sg20 type 0 sd 23:0:0:0: [sdu] Write Protect is off sd 23:0:0:0: [sdu] Mode Sense: 00 3a 00 00 sd 23:0:0:0: [sdu] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdu: sdu1 sd 23:0:0:0: [sdu] Attached SCSI disk ata25: link is slow to respond, please be patient (ready=0) ata25: SRST failed (errno=-16) ata25: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata25.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata25.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata25.00: configured for UDMA/133 scsi 24:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 24:0:0:0: [sdv] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 24:0:0:0: Attached scsi generic sg21 type 0 sd 24:0:0:0: [sdv] Write Protect is off sd 24:0:0:0: [sdv] Mode Sense: 00 3a 00 00 sd 24:0:0:0: [sdv] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdv: sdv1 sd 24:0:0:0: [sdv] Attached SCSI disk ata26: link is slow to respond, please be patient (ready=0) ata26: SRST failed (errno=-16) ata26: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata26.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata26.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata26.00: configured for UDMA/133 scsi 25:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 25:0:0:0: [sdw] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 25:0:0:0: Attached scsi generic sg22 type 0 sd 25:0:0:0: [sdw] Write Protect is off sd 25:0:0:0: [sdw] Mode Sense: 00 3a 00 00 sd 25:0:0:0: [sdw] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdw: sdw1 sd 25:0:0:0: [sdw] Attached SCSI disk ata27: link is slow to respond, please be patient (ready=0) ata27: SRST failed (errno=-16) ata27: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata27.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata27.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata27.00: configured for UDMA/133 scsi 26:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 26:0:0:0: [sdx] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 26:0:0:0: Attached scsi generic sg23 type 0 sd 26:0:0:0: [sdx] Write Protect is off sd 26:0:0:0: [sdx] Mode Sense: 00 3a 00 00 sd 26:0:0:0: [sdx] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdx: sdx1 sd 26:0:0:0: [sdx] Attached SCSI disk ata28: SATA link down (SStatus 0 SControl 300) ata29: link is slow to respond, please be patient (ready=0) ata29: SRST failed (errno=-16) ata29: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata29.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata29.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata29.00: configured for UDMA/133 scsi 28:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 28:0:0:0: [sdy] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 28:0:0:0: Attached scsi generic sg24 type 0 sd 28:0:0:0: [sdy] Write Protect is off sd 28:0:0:0: [sdy] Mode Sense: 00 3a 00 00 sd 28:0:0:0: [sdy] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdy: sdy1 sd 28:0:0:0: [sdy] Attached SCSI disk ata30: link is slow to respond, please be patient (ready=0) ata30: SRST failed (errno=-16) ata30: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata30.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133 ata30.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata30.00: configured for UDMA/133 scsi 29:0:0:0: Direct-Access ATA WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5 sd 29:0:0:0: [sdz] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 29:0:0:0: Attached scsi generic sg25 type 0 sd 29:0:0:0: [sdz] Write Protect is off sd 29:0:0:0: [sdz] Mode Sense: 00 3a 00 00 sd 29:0:0:0: [sdz] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdz: sdz1 sd 29:0:0:0: [sdz] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 19 and added 19 devices. md: autorun ... md: considering sdz1 ... md: adding sdz1 ... md: adding sdy1 ... md: adding sdx1 ... md: adding sdw1 ... md: adding sdv1 ... md: adding sdu1 ... md: adding sdt1 ... md: adding sdm1 ... md: adding sdl1 ... md: adding sdk1 ... md: adding sdj1 ... md: adding sdi1 ... md: adding sdh1 ... md: adding sdg1 ... md: adding sdf1 ... md: adding sde1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: created md0 md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: running: raid5: device sdz1 operational as raid disk 10 raid5: device sdy1 operational as raid disk 2 raid5: device sdx1 operational as raid disk 17 raid5: device sdw1 operational as raid disk 15 raid5: device sdv1 operational as raid disk 16 raid5: device sdu1 operational as raid disk 12 raid5: device sdt1 operational as raid disk 13 raid5: device sdm1 operational as raid disk 18 raid5: device sdl1 operational as raid disk 14 raid5: device sdk1 operational as raid disk 9 raid5: device sdj1 operational as raid disk 7 raid5: device sdi1 operational as raid disk 6 raid5: device sdh1 operational as raid disk 8 raid5: device sdg1 operational as raid disk 5 raid5: device sdf1 operational as raid disk 1 raid5: device sde1 operational as raid disk 3 raid5: device sdd1 operational as raid disk 0 raid5: device sdc1 operational as raid disk 11 raid5: device sdb1 operational as raid disk 4 raid5: allocated 20022kB for md0 10: w=1 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 2: w=2 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 17: w=3 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 15: w=4 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 16: w=5 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 12: w=6 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 13: w=7 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 18: w=8 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 14: w=9 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 9: w=10 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 7: w=11 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 6: w=12 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 8: w=13 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 5: w=14 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 1: w=15 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 3: w=16 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 0: w=17 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 11: w=18 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 4: w=19 pa=0 pr=19 m=2 a=2 r=19 op1=0 op2=0 raid5: raid level 6 set md0 active with 19 out of 19 devices, algorithm 2 RAID5 conf printout: --- rd:19 wd:19 disk 0, o:1, dev:sdd1 disk 1, o:1, dev:sdf1 disk 2, o:1, dev:sdy1 disk 3, o:1, dev:sde1 disk 4, o:1, dev:sdb1 disk 5, o:1, dev:sdg1 disk 6, o:1, dev:sdi1 disk 7, o:1, dev:sdj1 disk 8, o:1, dev:sdh1 disk 9, o:1, dev:sdk1 disk 10, o:1, dev:sdz1 disk 11, o:1, dev:sdc1 disk 12, o:1, dev:sdu1 disk 13, o:1, dev:sdt1 disk 14, o:1, dev:sdl1 disk 15, o:1, dev:sdw1 disk 16, o:1, dev:sdv1 disk 17, o:1, dev:sdx1 disk 18, o:1, dev:sdm1 md0: detected capacity change from 0 to 12752611704832 md: ... autorun DONE. REISERFS (device sda5): found reiserfs format "3.6" with standard journal REISERFS (device sda5): using ordered data mode REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda5): checking transaction log (sda5) REISERFS (device sda5): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:5. Freeing unused kernel memory: 464k freed iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:0d:00.0: setting latency timer to 64 e1000e 0000:0d:00.0: irq 78 for MSI/MSI-X i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 Copyright (c) 2007-2009 Intel Corporation. igb 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 igb 0000:04:00.0: setting latency timer to 64 igb 0000:04:00.0: irq 79 for MSI/MSI-X igb 0000:04:00.0: irq 80 for MSI/MSI-X igb 0000:04:00.0: irq 81 for MSI/MSI-X igb 0000:04:00.0: irq 82 for MSI/MSI-X igb 0000:04:00.0: irq 83 for MSI/MSI-X igb 0000:04:00.0: irq 84 for MSI/MSI-X igb 0000:04:00.0: irq 85 for MSI/MSI-X igb 0000:04:00.0: irq 86 for MSI/MSI-X igb 0000:04:00.0: irq 87 for MSI/MSI-X 0000:0d:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:66:e8:56 0000:0d:00.0: eth0: Intel(R) PRO/1000 Network Connection Linux video capture interface: v2.00 0000:0d:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff e1000e 0000:0f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e1000e 0000:0f:00.0: setting latency timer to 64 e1000e 0000:0f:00.0: irq 88 for MSI/MSI-X em28xx: New device USB 2821 Device @ 480 Mbps (eb1a:2821, interface 0, class 0) em28xx #0: chip ID is em2820 (or em2710) 0000:0f:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:66:e8:57 0000:0f:00.0: eth1: Intel(R) PRO/1000 Network Connection 0000:0f:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:04:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:30:48:dc:b3:72 igb 0000:04:00.0: eth2: PBA No: 0101ff-0ff igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) igb 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 igb 0000:04:00.1: setting latency timer to 64 igb 0000:04:00.1: irq 89 for MSI/MSI-X igb 0000:04:00.1: irq 90 for MSI/MSI-X igb 0000:04:00.1: irq 91 for MSI/MSI-X igb 0000:04:00.1: irq 92 for MSI/MSI-X igb 0000:04:00.1: irq 93 for MSI/MSI-X igb 0000:04:00.1: irq 94 for MSI/MSI-X igb 0000:04:00.1: irq 95 for MSI/MSI-X igb 0000:04:00.1: irq 96 for MSI/MSI-X igb 0000:04:00.1: irq 97 for MSI/MSI-X em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 21 28 90 00 11 03 6a 22 00 00 em28xx #0: i2c eeprom 10: 00 00 04 57 06 21 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 02 00 01 01 f0 10 00 00 00 00 00 00 5b 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 03 01 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 32 00 31 00 20 00 44 00 em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x37da7b8a em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 em28xx #0: Identified as Terratec Cinergy 250 USB (card=2) igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:04:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:30:48:dc:b3:73 igb 0000:04:00.1: eth3: PBA No: 0101ff-0ff igb 0000:04:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) saa7115 1-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) em28xx #0: Config register raw data: 0x90 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as /dev/video0 em28xx audio device (eb1a:2821): interface 1, class 1 em28xx audio device (eb1a:2821): interface 2, class 1 usbcore: registered new interface driver em28xx em28xx driver loaded md0: unknown partition table Adding 3903784k swap on /dev/sda2. Priority:-1 extents:1 across:3903784k w83627hf: Found W83627HF chip at 0x290 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. REISERFS (device sda6): found reiserfs format "3.6" with standard journal REISERFS (device sda6): using ordered data mode REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda6): checking transaction log (sda6) REISERFS (device sda6): Using r5 hash to sort names REISERFS (device sda7): found reiserfs format "3.6" with standard journal REISERFS (device sda7): using ordered data mode REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda7): checking transaction log (sda7) REISERFS (device sda7): Using r5 hash to sort names REISERFS (device sda8): found reiserfs format "3.6" with standard journal REISERFS (device sda8): using ordered data mode REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda8): checking transaction log (sda8) REISERFS (device sda8): Using r5 hash to sort names Filesystem "md0": Disabling barriers, trial barrier write failed XFS mounting filesystem md0 Ending clean XFS mount for filesystem: md0 igb 0000:04:00.1: changing MTU from 1500 to 9014 device eth0 entered promiscuous mode e1000e 0000:0d:00.0: irq 78 for MSI/MSI-X e1000e 0000:0d:00.0: irq 78 for MSI/MSI-X device eth1 entered promiscuous mode e1000e 0000:0f:00.0: irq 88 for MSI/MSI-X e1000e 0000:0f:00.0: irq 88 for MSI/MSI-X igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:0f:00.0: eth1: 10/100 speed: disabling TSO br0: port 2(eth1) entering learning state device tap1 entered promiscuous mode br0: port 3(tap1) entering learning state device tap2 entered promiscuous mode br0: port 4(tap2) entering learning state e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX br0: port 1(eth0) entering learning state device tap4 entered promiscuous mode device tap5 entered promiscuous mode igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX br0: port 2(eth1) entering forwarding state br0: port 3(tap1) entering forwarding state br0: port 4(tap2) entering forwarding state br0: port 1(eth0) entering forwarding state device tap3 entered promiscuous mode br0: port 5(tap3) entering learning state br0: port 5(tap3) entering forwarding state kvm: emulating exchange as write sdn: sdn1 mtrr: type mismatch for d8000000,2000000 old: write-back new: write-combining ata23: exception Emask 0x10 SAct 0x0 SErr 0x100000 action 0x6 frozen ata23: edma_err_cause=00000020 pp_flags=00000003, SError=00100000 ata23: SError: { Dispar } ata23: hard resetting link ata23: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata23.00: configured for UDMA/133 ata23: EH complete -- Harri.