[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe8ac00 (usable) [ 0.000000] BIOS-e820: 000000003fe8ac00 - 000000003fe8cc00 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI data) [ 0.000000] BIOS-e820: 000000003fe8ec00 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3fe8a max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fe8ac00 (usable) [ 0.000000] modified: 000000003fe8ac00 - 000000003fe8cc00 (ACPI NVS) [ 0.000000] modified: 000000003fe8cc00 - 000000003fe8ec00 (ACPI data) [ 0.000000] modified: 000000003fe8ec00 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f790000 - 2ff2769e [ 0.000000] ACPI: RSDP 000feb00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 000fd260 00074 (v01 DELL WS 380 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 000fd358 000F4 (v03 DELL WS 380 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT fffca5f2 030D7 (v01 DELL dt_ex 00001000 INTL 20050309) [ 0.000000] ACPI: FACS 3fe8ac00 00040 [ 0.000000] ACPI: SSDT fffcd7ea 000AC (v01 DELL st_ex 00001000 INTL 20050309) [ 0.000000] ACPI: APIC 000fd44c 00072 (v01 DELL WS 380 00000007 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd4be 00028 (v01 DELL WS 380 00000007 ASL 00000061) [ 0.000000] ACPI: ASF! 000fd4e6 00067 (v16 DELL WS 380 00000007 ASL 00000061) [ 0.000000] ACPI: MCFG 000fd54d 0003E (v01 DELL WS 380 00000007 ASL 00000061) [ 0.000000] ACPI: HPET 000fd58b 00038 (v01 DELL WS 380 00000007 ASL 00000061) [ 0.000000] ACPI: SSDT 3fe8ac40 00175 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050309) [ 0.000000] ACPI: SSDT 3fe8b049 00175 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050309) [ 0.000000] ACPI: SSDT 3fe8b452 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050309) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 134MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8] [ 0.000000] #4 [002f790000 - 002ff2769e] RAMDISK ==> [002f790000 - 002ff2769e] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [00008dd000 - 00008e019c] BRK ==> [00008dd000 - 00008e019c] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fe8a [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0003fe8a [ 0.000000] On node 0 totalpages: 261670 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3964 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 270 pages used for memmap [ 0.000000] HighMem zone: 34174 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u1048576 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259624 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=be7bb49d-932d-45a0-8dd0-4fdfef937420 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5235400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe8a) [ 0.000000] Memory: 1015640k/1047080k available (4680k kernel code, 30232k reserved, 2122k data, 656k init, 137776k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB) [ 0.000000] .data : 0xc05922c7 - 0xc07a4e68 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc05922c7 (4680 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2793.322 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.64 BogoMIPS (lpj=11173288) [ 0.004026] Security Framework initialized [ 0.004047] AppArmor: AppArmor initialized [ 0.004056] Mount-cache hash table entries: 512 [ 0.004211] Initializing cgroup subsys ns [ 0.004216] Initializing cgroup subsys cpuacct [ 0.004223] Initializing cgroup subsys memory [ 0.004232] Initializing cgroup subsys devices [ 0.004235] Initializing cgroup subsys freezer [ 0.004238] Initializing cgroup subsys net_cls [ 0.004268] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004273] CPU: L2 cache: 2048K [ 0.004276] CPU: Physical Processor ID: 0 [ 0.004279] CPU: Processor Core ID: 0 [ 0.004283] mce: CPU supports 4 MCE banks [ 0.004298] CPU0: Thermal monitoring enabled (TM1) [ 0.004303] using mwait in idle threads. [ 0.004311] Performance Events: no PMU driver, software events only. [ 0.004319] Checking 'hlt' instruction... OK. [ 0.024098] ACPI: Core revision 20090903 [ 0.142096] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.142103] ftrace: allocating 21789 entries in 43 pages [ 0.144065] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.144392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.186837] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 [ 0.188001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.272122] CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 [ 0.272139] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.276022] Brought up 2 CPUs [ 0.276026] Total of 2 processors activated (11172.73 BogoMIPS). [ 0.276635] CPU0 attaching sched-domain: [ 0.276640] domain 0: span 0-1 level CPU [ 0.276643] groups: 0 1 [ 0.276651] CPU1 attaching sched-domain: [ 0.276654] domain 0: span 0-1 level CPU [ 0.276658] groups: 1 0 [ 0.276759] devtmpfs: initialized [ 0.276759] regulator: core version 0.5 [ 0.276759] Time: 13:38:21 Date: 11/12/10 [ 0.276759] NET: Registered protocol family 16 [ 0.276759] Trying to unpack rootfs image as initramfs... [ 0.276759] EISA bus registered [ 0.276759] ACPI: bus type pci registered [ 0.276759] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.276759] PCI: MCFG area at f0000000 reserved in E820 [ 0.276759] PCI: Using MMCONFIG for extended config space [ 0.276759] PCI: Using configuration type 1 for base access [ 0.284145] bio: create slab at 0 [ 0.284950] ACPI: EC: Look up EC in DSDT [ 0.317236] ACPI: BIOS _OSI(Linux) query ignored [ 0.329178] ACPI: Interpreter enabled [ 0.329185] ACPI: (supports S0 S1 S3 S4 S5) [ 0.329221] ACPI: Using IOAPIC for interrupt routing [ 0.389411] ACPI: No dock devices found. [ 0.393158] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.393317] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.393322] pci 0000:00:01.0: PME# disabled [ 0.393406] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff] [ 0.393462] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.393467] pci 0000:00:1b.0: PME# disabled [ 0.393551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.393556] pci 0000:00:1c.0: PME# disabled [ 0.393644] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.393649] pci 0000:00:1c.4: PME# disabled [ 0.393733] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.393738] pci 0000:00:1c.5: PME# disabled [ 0.393796] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] [ 0.393859] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] [ 0.393920] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] [ 0.393984] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f] [ 0.394052] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff] [ 0.394115] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.394121] pci 0000:00:1d.7: PME# disabled [ 0.394272] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.394278] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO [ 0.394283] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 0.394288] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) [ 0.394346] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.394355] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.394364] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.394372] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.394381] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.394443] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] [ 0.394452] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] [ 0.394460] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] [ 0.394468] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] [ 0.394476] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf] [ 0.394484] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfebfbc00-0xfebfbfff] [ 0.394516] pci 0000:00:1f.2: PME# supported from D3hot [ 0.394521] pci 0000:00:1f.2: PME# disabled [ 0.394579] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] [ 0.394648] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.394661] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.394673] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfd000000-0xfdffffff] [ 0.394685] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfea00000-0xfea1ffff] [ 0.394766] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfeafffff] [ 0.394773] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.394829] pci 0000:00:1c.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.394964] pci 0000:04:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff] [ 0.395049] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.395056] pci 0000:04:00.0: PME# disabled [ 0.395118] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.395169] pci 0000:05:02.0: reg 10 io port: [0xdcc0-0xdcc7] [ 0.395179] pci 0000:05:02.0: reg 14 io port: [0xdcb0-0xdcb3] [ 0.395189] pci 0000:05:02.0: reg 18 io port: [0xdcc8-0xdccf] [ 0.395198] pci 0000:05:02.0: reg 1c io port: [0xdcb4-0xdcb7] [ 0.395208] pci 0000:05:02.0: reg 20 io port: [0xdce0-0xdcef] [ 0.395217] pci 0000:05:02.0: reg 24 32bit mmio: [0xfbcffc00-0xfbcffdff] [ 0.395226] pci 0000:05:02.0: reg 30 32bit mmio pref: [0xfbd00000-0xfbd7ffff] [ 0.395250] pci 0000:05:02.0: supports D1 D2 [ 0.395294] pci 0000:05:04.0: reg 10 io port: [0xdcd0-0xdcd7] [ 0.395303] pci 0000:05:04.0: reg 14 io port: [0xdcb8-0xdcbb] [ 0.395312] pci 0000:05:04.0: reg 18 io port: [0xdcd8-0xdcdf] [ 0.395321] pci 0000:05:04.0: reg 1c io port: [0xdcbc-0xdcbf] [ 0.395330] pci 0000:05:04.0: reg 20 io port: [0xdcf0-0xdcff] [ 0.395339] pci 0000:05:04.0: reg 24 32bit mmio: [0xfbcffe00-0xfbcfffff] [ 0.395349] pci 0000:05:04.0: reg 30 32bit mmio pref: [0xfbd00000-0xfbd7ffff] [ 0.395372] pci 0000:05:04.0: supports D1 D2 [ 0.395423] pci 0000:00:1e.0: transparent bridge [ 0.395428] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.395434] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbc00000-0xfbdfffff] [ 0.395468] pci_bus 0000:00: on NUMA node 0 [ 0.395474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.395907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.396360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.396656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.396874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] [ 0.397121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] [ 0.828294] Freeing initrd memory: 7773k freed [ 0.989437] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.989865] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.990258] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.990683] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.991091] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.991496] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.991943] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.992346] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.992565] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.992573] vgaarb: loaded [ 0.992738] SCSI subsystem initialized [ 0.992775] libata version 3.00 loaded. [ 0.992775] usbcore: registered new interface driver usbfs [ 0.992775] usbcore: registered new interface driver hub [ 0.992775] usbcore: registered new device driver usb [ 0.992775] ACPI: WMI: Mapper loaded [ 0.992775] PCI: Using ACPI for IRQ routing [ 0.992775] NetLabel: Initializing [ 0.992775] NetLabel: domain hash size = 128 [ 0.992775] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.992775] NetLabel: unlabeled traffic allowed by default [ 0.992775] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.992775] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.996033] Switching to clocksource tsc [ 0.998858] AppArmor: AppArmor Filesystem Enabled [ 0.998875] pnp: PnP ACPI init [ 0.998887] ACPI: bus type pnp registered [ 1.005049] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 1.005055] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 1.030749] pnp: PnP ACPI: found 10 devices [ 1.030752] ACPI: ACPI bus type pnp unregistered [ 1.030758] PnPBIOS: Disabled by ACPI PNP [ 1.030772] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 1.030786] system 00:08: iomem range 0x0-0x9ffff could not be reserved [ 1.030791] system 00:08: iomem range 0x100000-0xffffff could not be reserved [ 1.030797] system 00:08: iomem range 0x1000000-0x3fe8abff could not be reserved [ 1.030801] system 00:08: iomem range 0xf0000-0xfffff could not be reserved [ 1.030805] system 00:08: iomem range 0xc0000-0xd7fff could not be reserved [ 1.030809] system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved [ 1.030813] system 00:08: iomem range 0xfee00000-0xfeefffff has been reserved [ 1.030817] system 00:08: iomem range 0xfed20000-0xfed9ffff has been reserved [ 1.030821] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 1.030825] system 00:08: iomem range 0xffc00000-0xffffffff has been reserved [ 1.030834] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved [ 1.030838] system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved [ 1.065610] pci 0000:05:02.0: BAR 6: address space collision on of device [0xfbd00000-0xfbd7ffff] [ 1.065617] pci 0000:05:04.0: BAR 6: address space collision on of device [0xfbd00000-0xfbd7ffff] [ 1.065670] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.065673] pci 0000:00:01.0: IO window: disabled [ 1.065679] pci 0000:00:01.0: MEM window: 0xfc000000-0xfeafffff [ 1.065684] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 1.065691] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.065695] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 1.065701] pci 0000:00:1c.0: MEM window: 0xfbf00000-0xfbffffff [ 1.065707] pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff [ 1.065715] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 1.065719] pci 0000:00:1c.4: IO window: 0x2000-0x2fff [ 1.065725] pci 0000:00:1c.4: MEM window: 0x40200000-0x403fffff [ 1.065731] pci 0000:00:1c.4: PREFETCH window: 0x00000040400000-0x000000405fffff [ 1.065739] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 1.065743] pci 0000:00:1c.5: IO window: 0x3000-0x3fff [ 1.065749] pci 0000:00:1c.5: MEM window: 0xfbe00000-0xfbefffff [ 1.065755] pci 0000:00:1c.5: PREFETCH window: 0x00000040600000-0x000000407fffff [ 1.065764] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 1.065769] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 1.065775] pci 0000:00:1e.0: MEM window: 0xfbc00000-0xfbdfffff [ 1.065780] pci 0000:00:1e.0: PREFETCH window: 0x40800000-0x408fffff [ 1.065797] alloc irq_desc for 16 on node -1 [ 1.065800] alloc kstat_irqs on node -1 [ 1.065807] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.065813] pci 0000:00:01.0: setting latency timer to 64 [ 1.065824] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.065830] pci 0000:00:1c.0: setting latency timer to 64 [ 1.065841] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.065846] pci 0000:00:1c.4: setting latency timer to 64 [ 1.065857] alloc irq_desc for 17 on node -1 [ 1.065859] alloc kstat_irqs on node -1 [ 1.065865] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.065870] pci 0000:00:1c.5: setting latency timer to 64 [ 1.065879] pci 0000:00:1e.0: setting latency timer to 64 [ 1.065885] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.065889] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.065892] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfeafffff] [ 1.065896] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 1.065900] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 1.065903] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff] [ 1.065907] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x401fffff] [ 1.065910] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 1.065914] pci_bus 0000:03: resource 1 mem: [0x40200000-0x403fffff] [ 1.065917] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff] [ 1.065921] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] [ 1.065924] pci_bus 0000:04: resource 1 mem: [0xfbe00000-0xfbefffff] [ 1.065928] pci_bus 0000:04: resource 2 pref mem [0x40600000-0x407fffff] [ 1.065931] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff] [ 1.065935] pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbdfffff] [ 1.065938] pci_bus 0000:05: resource 2 pref mem [0x40800000-0x408fffff] [ 1.065942] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 1.065945] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 1.065993] NET: Registered protocol family 2 [ 1.066128] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.066578] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.067198] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.067507] TCP: Hash tables configured (established 131072 bind 65536) [ 1.067510] TCP reno registered [ 1.067612] NET: Registered protocol family 1 [ 1.067750] pci 0000:01:00.0: Boot video device [ 1.067788] Simple Boot Flag at 0x7a set to 0x1 [ 1.068025] cpufreq-nforce2: No nForce2 chipset. [ 1.068067] Scanning for low memory corruption every 60 seconds [ 1.068217] audit: initializing netlink socket (disabled) [ 1.068229] type=2000 audit(1289569101.068:1): initialized [ 1.077939] highmem bounce pool size: 64 pages [ 1.077951] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.080127] VFS: Disk quotas dquot_6.5.2 [ 1.080214] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.081079] fuse init (API version 7.13) [ 1.081210] msgmni has been set to 1731 [ 1.081577] alg: No test for stdrng (krng) [ 1.081664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.081668] io scheduler noop registered [ 1.081671] io scheduler anticipatory registered [ 1.081674] io scheduler deadline registered [ 1.081735] io scheduler cfq registered (default) [ 1.081925] alloc irq_desc for 24 on node -1 [ 1.081929] alloc kstat_irqs on node -1 [ 1.081940] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.081949] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.082085] alloc irq_desc for 25 on node -1 [ 1.082088] alloc kstat_irqs on node -1 [ 1.082098] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 1.082108] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.082262] alloc irq_desc for 26 on node -1 [ 1.082265] alloc kstat_irqs on node -1 [ 1.082275] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X [ 1.082285] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.082441] alloc irq_desc for 27 on node -1 [ 1.082444] alloc kstat_irqs on node -1 [ 1.082455] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X [ 1.082466] pcieport 0000:00:1c.5: setting latency timer to 64 [ 1.082600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.082738] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.082857] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.082867] ACPI: Power Button [VBTN] [ 1.082939] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.082943] ACPI: Power Button [PWRF] [ 1.083769] processor LNXCPU:00: registered as cooling_device0 [ 1.083874] processor LNXCPU:01: registered as cooling_device1 [ 1.134418] isapnp: Scanning for PnP cards... [ 1.136447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.136561] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.137018] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.138559] brd: module loaded [ 1.139265] loop: module loaded [ 1.139379] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.139494] ata_piix 0000:00:1f.1: version 2.13 [ 1.139509] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.139557] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.139647] scsi0 : ata_piix [ 1.139747] scsi1 : ata_piix [ 1.139798] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.139803] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.140337] Fixed MDIO Bus: probed [ 1.140391] PPP generic driver version 2.4.2 [ 1.140447] tun: Universal TUN/TAP device driver, 1.6 [ 1.140450] tun: (C) 1999-2004 Max Krasnyansky [ 1.140567] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.140591] alloc irq_desc for 21 on node -1 [ 1.140594] alloc kstat_irqs on node -1 [ 1.140602] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.140619] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.140623] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.140669] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.140691] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.140704] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.144597] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 1.144614] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800 [ 1.160019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.160151] usb usb1: configuration #1 chosen from 1 choice [ 1.160193] hub 1-0:1.0: USB hub found [ 1.160203] hub 1-0:1.0: 8 ports detected [ 1.160292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.160313] uhci_hcd: USB Universal Host Controller Interface driver [ 1.160343] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.160352] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.160356] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.160403] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.160430] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 [ 1.160551] usb usb2: configuration #1 chosen from 1 choice [ 1.160591] hub 2-0:1.0: USB hub found [ 1.160600] hub 2-0:1.0: 2 ports detected [ 1.160664] alloc irq_desc for 22 on node -1 [ 1.160667] alloc kstat_irqs on node -1 [ 1.160673] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.160683] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.160687] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.160739] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.160773] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 [ 1.160892] usb usb3: configuration #1 chosen from 1 choice [ 1.160933] hub 3-0:1.0: USB hub found [ 1.160942] hub 3-0:1.0: 2 ports detected [ 1.161001] alloc irq_desc for 18 on node -1 [ 1.161005] alloc kstat_irqs on node -1 [ 1.161010] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.161018] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.161022] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.161066] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.161100] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 1.161222] usb usb4: configuration #1 chosen from 1 choice [ 1.161264] hub 4-0:1.0: USB hub found [ 1.161273] hub 4-0:1.0: 2 ports detected [ 1.161332] alloc irq_desc for 23 on node -1 [ 1.161335] alloc kstat_irqs on node -1 [ 1.161341] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.161348] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.161352] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.161400] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.161434] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 [ 1.161560] usb usb5: configuration #1 chosen from 1 choice [ 1.161600] hub 5-0:1.0: USB hub found [ 1.161608] hub 5-0:1.0: 2 ports detected [ 1.161743] PNP: No PS/2 controller found. Probing ports directly. [ 1.164552] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.164562] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.164674] mice: PS/2 mouse device common for all mice [ 1.164824] rtc_cmos 00:05: RTC can wake from S4 [ 1.164877] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.164908] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 1.165065] device-mapper: uevent: version 1.0.3 [ 1.165220] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.165310] device-mapper: multipath: version 1.1.0 loaded [ 1.165314] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.165468] EISA: Probing bus 0 at eisa.0 [ 1.165475] Cannot allocate resource for EISA slot 1 [ 1.165478] Cannot allocate resource for EISA slot 2 [ 1.165481] Cannot allocate resource for EISA slot 3 [ 1.165499] EISA: Detected 0 cards. [ 1.165596] cpuidle: using governor ladder [ 1.165601] cpuidle: using governor menu [ 1.166291] TCP cubic registered [ 1.166479] NET: Registered protocol family 10 [ 1.167161] lo: Disabled Privacy Extensions [ 1.167746] NET: Registered protocol family 17 [ 1.168242] Using IPI No-Shortcut mode [ 1.168347] PM: Resume from disk failed. [ 1.168363] registered taskstats version 1 [ 1.168793] Magic number: 2:890:634 [ 1.168859] rtc_cmos 00:05: setting system clock to 2010-11-12 13:38:22 UTC (1289569102) [ 1.168863] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.168866] EDD information not available. [ 1.168991] ata2: port disabled. ignoring. [ 1.332576] ata1.00: ATAPI: PHILIPS DVD+/-RW DVD8801, 4D28, max UDMA/33 [ 1.332805] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 1.332810] ata1.01: 156250000 sectors, multi 8: LBA [ 1.348499] ata1.00: configured for UDMA/33 [ 1.364435] ata1.01: configured for UDMA/100 [ 1.487548] isapnp: No Plug & Play device found [ 1.489803] scsi 0:0:0:0: CD-ROM PHILIPS DVD+-RW DVD8801 4D28 PQ: 0 ANSI: 5 [ 1.498412] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.498416] Uniform CD-ROM driver Revision: 3.20 [ 1.498551] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.498620] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.498770] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 [ 1.498940] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.498984] sd 0:0:1:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.499088] sd 0:0:1:0: [sda] Write Protect is off [ 1.499092] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.499130] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.499360] sda: sda2 sda3 [ 1.547084] sd 0:0:1:0: [sda] Attached SCSI disk [ 1.547130] Freeing unused kernel memory: 656k freed [ 1.547696] Write protecting the kernel text: 4684k [ 1.547759] Write protecting the kernel read-only data: 1840k [ 1.572656] udev: starting version 151 [ 1.694166] ahci 0000:00:1f.2: version 3.0 [ 1.694187] alloc irq_desc for 20 on node -1 [ 1.694191] alloc kstat_irqs on node -1 [ 1.694201] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 1.694242] alloc irq_desc for 28 on node -1 [ 1.694245] alloc kstat_irqs on node -1 [ 1.694256] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.694345] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.694351] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.694357] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.694945] tg3.c:v3.102 (September 1, 2009) [ 1.694962] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.694971] tg3 0000:04:00.0: setting latency timer to 64 [ 1.698120] sata_sil 0000:05:02.0: version 2.4 [ 1.698156] sata_sil 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.702792] scsi2 : ahci [ 1.703011] scsi4 : ahci [ 1.703184] scsi5 : ahci [ 1.703337] scsi6 : ahci [ 1.703404] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 28 [ 1.703409] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 28 [ 1.703413] ata5: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 28 [ 1.703418] ata6: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 28 [ 1.703749] scsi3 : sata_sil [ 1.704201] scsi7 : sata_sil [ 1.704271] ata7: SATA max UDMA/100 mmio m512@0xfbcffc00 tf 0xfbcffc80 irq 18 [ 1.704276] ata8: SATA max UDMA/100 mmio m512@0xfbcffc00 tf 0xfbcffcc0 irq 18 [ 1.704337] sata_sil 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.704732] scsi8 : sata_sil [ 1.704888] scsi9 : sata_sil [ 1.704947] ata9: SATA max UDMA/100 mmio m512@0xfbcffe00 tf 0xfbcffe80 irq 16 [ 1.704953] ata10: SATA max UDMA/100 mmio m512@0xfbcffe00 tf 0xfbcffec0 irq 16 [ 1.713937] eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001] (PCI Express) MAC address 00:13:72:1c:f2:6a [ 1.713942] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.713946] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.713950] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.768019] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 1.942175] usb 4-1: configuration #1 chosen from 1 choice [ 2.020052] ata3: SATA link down (SStatus 0 SControl 300) [ 2.020094] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.021205] ata5.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133 [ 2.021210] ata5.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 2.022565] ata5.00: configured for UDMA/133 [ 2.024065] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.024156] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.024226] ata6: SATA link down (SStatus 0 SControl 300) [ 2.032423] ata7.00: ATA-8: FUJITSU MHZ2160BH G2, 00000009, max UDMA/100 [ 2.032427] ata7.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.032655] ata9.00: ATA-7: ST9160823AS, 3.AAB, max UDMA/133 [ 2.032659] ata9.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.040367] ata7.00: configured for UDMA/100 [ 2.048395] ata9.00: configured for UDMA/100 [ 2.083794] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 2.184033] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 2.338471] usb 5-1: configuration #1 chosen from 1 choice [ 7.060033] ata4: link is slow to respond, please be patient (ready=0) [ 11.708026] ata4: COMRESET failed (errno=-16) [ 15.670709] udev: starting version 151 [ 15.730519] intel_rng: Firmware space is locked read-only. If you can't or [ 15.730522] intel_rng: don't want to disable this in firmware setup, and if [ 15.730524] intel_rng: you are certain that your system has a functional [ 15.730525] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 15.789335] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k [ 15.854841] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 15.911309] parport_pc 00:06: reported by Plug and Play ACPI [ 15.911371] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 15.921995] ppdev: user-space parallel port driver [ 15.987558] usbcore: registered new interface driver hiddev [ 16.002877] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3 [ 16.003201] generic-usb 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.2-1/input0 [ 16.016085] input: HID 413c:3010 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4 [ 16.016248] generic-usb 0003:413C:3010.0002: input,hidraw1: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.3-1/input0 [ 16.016289] usbcore: registered new interface driver usbhid [ 16.016294] usbhid: v2.6:USB HID core driver [ 16.030577] type=1505 audit(1289590717.359:2): operation="profile_load" pid=523 name="/sbin/dhclient3" [ 16.031317] type=1505 audit(1289590717.359:3): operation="profile_load" pid=523 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.031719] type=1505 audit(1289590717.359:4): operation="profile_load" pid=523 name="/usr/lib/connman/scripts/dhclient-script" [ 16.287572] type=1505 audit(1289590717.615:5): operation="profile_load" pid=636 name="/usr/share/gdm/guest-session/Xsession" [ 16.296280] type=1505 audit(1289590717.627:6): operation="profile_replace" pid=639 name="/sbin/dhclient3" [ 16.297097] type=1505 audit(1289590717.627:7): operation="profile_replace" pid=639 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.297509] type=1505 audit(1289590717.627:8): operation="profile_replace" pid=639 name="/usr/lib/connman/scripts/dhclient-script" [ 16.301129] type=1505 audit(1289590717.631:9): operation="profile_load" pid=640 name="/usr/bin/evince" [ 16.313388] type=1505 audit(1289590717.643:10): operation="profile_load" pid=640 name="/usr/bin/evince-previewer" [ 16.319270] type=1505 audit(1289590717.647:11): operation="profile_load" pid=640 name="/usr/bin/evince-thumbnailer" [ 16.338016] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.068017] ata4: link is slow to respond, please be patient (ready=0) [ 18.028186] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 18.028190] tg3: eth0: Flow control is on for TX and on for RX. [ 18.028332] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.716018] ata4: COMRESET failed (errno=-16) [ 27.076017] ata4: link is slow to respond, please be patient (ready=0) [ 28.112006] eth0: no IPv6 routers present [ 56.756014] ata4: COMRESET failed (errno=-16) [ 56.756064] ata4: limiting SATA link speed to 1.5 Gbps [ 57.076024] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 57.081774] ata4.00: ATA-8: SAMSUNG HM251JJ, 2AA00_00, max UDMA7 [ 57.081780] ata4.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 57.087649] ata4.00: configured for UDMA/133 [ 57.100168] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HM251JJ 2AA0 PQ: 0 ANSI: 5 [ 57.100456] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 57.100727] scsi 5:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCO PQ: 0 ANSI: 5 [ 57.100983] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 57.101723] scsi 3:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0000 PQ: 0 ANSI: 5 [ 57.101914] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 57.102435] sd 3:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 57.102517] sd 3:0:0:0: [sdd] Write Protect is off [ 57.102521] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 57.102598] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 57.102751] sd 5:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 57.102830] sd 5:0:0:0: [sdc] Write Protect is off [ 57.102834] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 57.102913] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 57.106476] sdd: [ 57.106702] sdc: [ 57.106909] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 57.106980] sd 4:0:0:0: [sdb] Write Protect is off [ 57.106984] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 57.107021] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 57.107213] sdb: sdb1 sdb2 [ 57.137157] sd 4:0:0:0: [sdb] Attached SCSI disk [ 57.424043] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 57.446378] sdd1 [ 57.447323] sd 3:0:0:0: [sdd] Attached SCSI disk [ 57.478563] sdc1 [ 57.479115] sd 5:0:0:0: [sdc] Attached SCSI disk [ 57.845328] ata8.00: ATA-8: TOSHIBA MK8052GSX, LV011D, max UDMA/100 [ 57.845334] ata8.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 57.852445] ata8.00: configured for UDMA/100 [ 57.852629] scsi 7:0:0:0: Direct-Access ATA TOSHIBA MK8052GS LV01 PQ: 0 ANSI: 5 [ 57.852981] sd 7:0:0:0: [sde] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 57.853016] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 57.853239] scsi 8:0:0:0: Direct-Access ATA ST9160823AS 3.AA PQ: 0 ANSI: 5 [ 57.853509] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 57.853548] sd 8:0:0:0: [sdf] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 57.853688] sd 8:0:0:0: [sdf] Write Protect is off [ 57.853693] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 57.853735] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 57.853957] sdf: [ 57.854158] sd 7:0:0:0: [sde] Write Protect is off [ 57.854164] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 57.854211] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 57.855679] sde: sde1 [ 57.907722] sd 7:0:0:0: [sde] Attached SCSI disk [ 57.993120] sdf1 [ 57.993652] sd 8:0:0:0: [sdf] Attached SCSI disk [ 58.284040] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 58.325298] ata10.00: ATA-8: WDC WD800BEVS-22VAT0, 11.01A11, max UDMA/133 [ 58.325304] ata10.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 58.340552] ata10.00: configured for UDMA/100 [ 58.340723] scsi 9:0:0:0: Direct-Access ATA WDC WD800BEVS-22 11.0 PQ: 0 ANSI: 5 [ 58.340994] sd 9:0:0:0: Attached scsi generic sg7 type 0 [ 58.341286] sd 9:0:0:0: [sdg] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 58.341365] sd 9:0:0:0: [sdg] Write Protect is off [ 58.341369] sd 9:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 58.341410] sd 9:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 58.341916] sdg: sdg1 [ 58.345084] sd 9:0:0:0: [sdg] Attached SCSI disk [ 58.346919] vga16fb: initializing [ 58.346925] vga16fb: mapped to 0xc00a0000 [ 58.347006] fb0: VGA16 VGA frame buffer device [ 58.356870] dell-wmi: No known WMI GUID found [ 58.363217] lp0: using parport0 (interrupt-driven). [ 58.367533] Linux agpgart interface v0.103 [ 58.412877] nvidia: module license 'NVIDIA' taints kernel. [ 58.412883] Disabling lock debugging due to kernel taint [ 59.576120] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 59.576132] nvidia 0000:01:00.0: setting latency timer to 64 [ 59.576138] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 59.577703] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 59.589937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 59.589974] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 59.641510] Console: switching to colour frame buffer device 80x30 [ 59.677394] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 59.677709] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 59.677910] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 59.678102] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 59.678295] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 64.862327] CPU0 attaching NULL sched-domain. [ 64.862336] CPU1 attaching NULL sched-domain. [ 64.892598] CPU0 attaching sched-domain: [ 64.892604] domain 0: span 0-1 level CPU [ 64.892608] groups: 0 1 [ 64.892618] CPU1 attaching sched-domain: [ 64.892621] domain 0: span 0-1 level CPU [ 64.892624] groups: 1 0