From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bokhan Artem Subject: Re: sct erc does not work with megaraid Date: Tue, 15 Feb 2011 22:00:52 +0600 Message-ID: <4D5AA334.7020301@ngs.ru> References: <4D5A5388.3010208@ngs.ru> <4D5A9FE9.9020409@interlog.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from smtpout10.ngs.ru ([195.93.186.216]:20381 "EHLO smtpout.ngs.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755375Ab1BOQBI (ORCPT ); Tue, 15 Feb 2011 11:01:08 -0500 In-Reply-To: <4D5A9FE9.9020409@interlog.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: dgilbert@interlog.com Cc: linux-scsi@vger.kernel.org, IDE/ATA development list Only sct erc does not work. General communication using sat is function= al. 15.02.2011 21:46, Douglas Gilbert =D0=BF=D0=B8=D1=88=D0=B5=D1=82: > That code looked familiar but I'm not sure what your > point was referring to it. Anyway ... > > Haven't worked much with Megaraid controllers but mptsas > controllers implement SAT (or at least did) in their > firmware. So upgrading the firmware on the controller fixed > the problems I had (some years back) with SAT compliance. > > Doug Gilbert=20