From: Mark Lord <kernel@teksavvy.com>
To: Tejun Heo <tj@kernel.org>
Cc: Robert Hancock <hancockrwd@gmail.com>,
Peter <elekesp@freemail.hu>,
linux-ide@vger.kernel.org
Subject: Re: sata problem...
Date: Mon, 14 Mar 2011 15:22:13 -0400 [thread overview]
Message-ID: <4D7E6AE5.7080709@teksavvy.com> (raw)
In-Reply-To: <20110313084236.GH2005@htj.dyndns.org>
On 11-03-13 04:42 AM, Tejun Heo wrote:
> On Sat, Mar 12, 2011 at 08:10:51PM -0600, Robert Hancock wrote:
>>> I dont know why there is "[ 2.098493] ata4.00: failed command: READ FPDMA QUEUED" in dmesg.
>>>
>>> I have 3 WD Green 1TB HDD, and I samsung 160GB HDD.
>>> 1 SAMSUNG and 1 WD on the intel SATA,
>>> 2 WD on the GIGABYTE Sata.
>>> I think the problem is only with the gigabye sata port.
>>
>> That's an uncorrectable read error the drive is reporting. Most
>> likely that hard drive is failing.
>
> Or maybe just a bad sector, in which case just writing it over would
> cause the drive to reallocate the failed region. I think this
> partial/transient failure mode is much more common than the whole
> drive going south.
One would think so! :)
But in my experience, the latter just about always follows the former
within a surprisingly short amount of time (weeks).
Cheers
prev parent reply other threads:[~2011-03-14 19:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <04BB68BD-352B-45B0-A7FC-42B6005A80B3@freemail.hu>
[not found] ` <20110227153338.GA23527@mtj.dyndns.org>
2011-03-12 20:33 ` sata problem Peter
2011-03-13 2:10 ` Robert Hancock
2011-03-13 8:42 ` Tejun Heo
2011-03-14 19:22 ` Mark Lord [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D7E6AE5.7080709@teksavvy.com \
--to=kernel@teksavvy.com \
--cc=elekesp@freemail.hu \
--cc=hancockrwd@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).