Re: qc timeout on a marvell 88F6282 board

[Richard Kang <turquesa@malgn.com>]

2011-07-07 오후 3:44, saeed bishara 쓴 글:
> On Thu, Jul 7, 2011 at 9:36 AM, Richard Kang<turquesa@malgn.com>  wrote:
>> 2011-07-06 오후 5:07, saeed bishara 쓴 글:
>>> Richard,
>>>
>>>   this board is supported by mainline kernel, can you try latest
>>> version (3.0-rcX)?
>>>> I can't find reason of not working. Please advise to me.
>>>>
>>>> Thank you.
>>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>> Dear saeed,
>>
>> I tested sata_sil24 driver with 3.0.0-rc6.
>> At first booting, machine id was not supported in new kernel.
>> And I replaced id(0x690) of DB-88F6281-BP with 0x20f.
>> After changing machine id, booting was completed.
>>
>> I loaded "libata dma=0" and "sata_sil24".
>> But result was same to before. ->  qc timeout(0xec)
> does this controller (sil24) works on different platfrom (PC)?
> have you tried different disk?
>> Thank you.
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
Dear saeed,

I tested this controller and this disk on a PC(ubuntu 10.10).
The controller works well. I test disk I/O. No problem.

Thank you.