From: Sergei Shtylyov <sshtylyov@mvista.com>
To: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org>
Cc: linux-ide@vger.kernel.org, s.hauer@pengutronix.de, jgarzik@pobox.com
Subject: Re: [patch 1/1] ata: Add iMX pata support
Date: Fri, 22 Jul 2011 15:52:38 +0400 [thread overview]
Message-ID: <4E296486.7090504@ru.mvista.com> (raw)
In-Reply-To: <20110722104659.733097200@rtp-net.org>
Hello.
On 22-07-2011 14:46, Arnaud Patard (Rtp) wrote:
> Add basic support for pata on iMX. It has been tested only on imx51.
> SDMA support will probably be added later so this version supports only
> PIO.
> v2:
> - enable only when needed IORDY
> - use dev_get_drvdata
Shouldn't this be under --- tearline?
> Signed-off-by: Arnaud Patard<arnaud.patard@rtp-net.org>
[...]
> Index: linux-2.6-submit/drivers/ata/pata_imx.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ linux-2.6-submit/drivers/ata/pata_imx.c 2011-07-22 12:46:29.000000000 +0200
> @@ -0,0 +1,260 @@
[...]
> +static int __devinit pata_imx_probe(struct platform_device *pdev)
> +{
> + struct ata_host *host;
> + struct ata_port *ap;
> + struct pata_imx_priv *priv;
> + int irq = 0;
> + struct resource *io_res;
> + struct resource *irq_res;
> +
> + io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (io_res == NULL)
> + return -EINVAL;
> +
> + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> + if (irq_res == NULL)
> + return -EINVAL;
> + irq = irq_res->start;
Using platfrom_get_irq() would have been somewhat simpler -- you don't
need 'irq_res' at all...
> +free_priv:
> + if (priv->clk)
> + clk_disable(priv->clk);
Need to call clk_put() also...
> + kfree(priv);
> + return -ENOMEM;
> +}
> +
> +static int __devexit pata_imx_remove(struct platform_device *pdev)
> +{
> + struct ata_host *host = dev_get_drvdata(&pdev->dev);
> + struct pata_imx_priv *priv = host->private_data;
> +
> + ata_host_detach(host);
> +
> + __raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
> +
> + if (priv->clk)
> + clk_disable(priv->clk);
Same here...
> +#ifdef CONFIG_PM
> +static int pata_imx_suspend(struct device *dev)
> +{
> + struct ata_host *host = dev_get_drvdata(dev);
> + struct pata_imx_priv *priv = host->private_data;
> + int ret;
> +
> + ret = ata_host_suspend(host, PMSG_SUSPEND);
> + if (!ret)
> + __raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
> +
> + if (priv->clk)
> + clk_disable(priv->clk);
> +
> + return ret;
> +}
> +
> +static int pata_imx_resume(struct device *dev)
> +{
> + struct ata_host *host = dev_get_drvdata(dev);
> + struct pata_imx_priv *priv = host->private_data;
> +
> + if (priv->clk)
> + clk_enable(priv->clk);
> +
> + __raw_writel(PATA_IMX_ATA_CTRL_FIFO_RST_B |
> + PATA_IMX_ATA_CTRL_ATA_RST_B,
> + priv->host_regs + PATA_IMX_ATA_CONTROL);
This will disable IORDY.
WBR, Sergei
next prev parent reply other threads:[~2011-07-22 11:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-22 10:46 [patch 1/1] ata: Add iMX pata support Arnaud Patard
2011-07-22 11:52 ` Sergei Shtylyov [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-07-26 14:58 Arnaud Patard
2011-07-16 21:04 Arnaud Patard
2011-07-17 13:32 ` Sergei Shtylyov
2011-07-21 15:59 ` Arnaud Patard
2011-07-22 11:56 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E296486.7090504@ru.mvista.com \
--to=sshtylyov@mvista.com \
--cc=arnaud.patard@rtp-net.org \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).