From: Mark Nelson <mdnelson8@gmail.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org, tj@kernel.org
Subject: [PATCH 1/1] ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327)
Date: Tue, 26 Jun 2012 12:45:59 +1000 [thread overview]
Message-ID: <4FE92267.60106@gmail.com> (raw)
Like e65cc194f7628ecaa02462f22f42fb09b50dcd49 this patch enables 64bit DMA
for the AHCI SATA controller of a board that has the SB600 southbridge. In
this case though we're enabling 64bit DMA for another MSI motherboard, the
K9AGM2 or MS-7327. It is new enough that all of the BIOS releases since
the initial release (1.0 from 2007-02-09) work correctly with 64bit DMA
enabled.
Signed-off-by: Mark Nelson <mdnelson8@gmail.com>
---
drivers/ata/ahci.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
Index: linux-2.6/drivers/ata/ahci.c
===================================================================
--- linux-2.6.orig/drivers/ata/ahci.c
+++ linux-2.6/drivers/ata/ahci.c
@@ -777,6 +777,22 @@ static bool ahci_sb600_enable_64bit(stru
},
},
/*
+ * All BIOS versions for the MSI K9AGM2 (MS-7327) support
+ * 64bit DMA.
+ *
+ * This board also had the typo mentioned above in the
+ * Manufacturer DMI field (fixed in BIOS version 1.5), so
+ * match on DMI_BOARD_VENDOR of "MICRO-STAR INTER" again.
+ */
+ {
+ .ident = "MSI K9AGM2",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "MICRO-STAR INTER"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-7327"),
+ },
+ },
+ /*
* All BIOS versions for the Asus M3A support 64bit DMA.
* (all release versions from 0301 to 1206 were tested)
*/
next reply other threads:[~2012-06-26 2:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-26 2:45 Mark Nelson [this message]
2012-06-26 10:48 ` [PATCH 1/1] ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) Sergei Shtylyov
2012-06-27 6:31 ` Mark Nelson
2012-06-27 11:43 ` Sergei Shtylyov
2012-06-28 2:32 ` [PATCH 1/1] ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2 Mark Nelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FE92267.60106@gmail.com \
--to=mdnelson8@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox