From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Tejun Heo <tj@kernel.org>, Andrew Lunn <andrew@lunn.ch>
Cc: kishon@ti.com, linux-ide@vger.kernel.org
Subject: Re: [PATCH 3/3] ata: sata_mv: Fix probe failures with optional phys
Date: Mon, 03 Feb 2014 18:17:43 +0100 [thread overview]
Message-ID: <52EFCF37.3090704@free-electrons.com> (raw)
In-Reply-To: <52EFC21E.7030902@free-electrons.com>
On 03/02/2014 17:21, Gregory CLEMENT wrote:
> On 03/02/2014 17:03, Tejun Heo wrote:
>> On Sat, Feb 01, 2014 at 03:15:57PM +0100, Andrew Lunn wrote:
>>> Make use of devm_phy_optional() in order to fix probe failures on
>>> Armada 370, XP and others, when there is no phy driver available.
>>>
>>> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
>>
>> Looks good to me from the ata side. How should these be routed? I
>> can take them through libata/for-3.14-fixes once phy people ack the
>> changes or the other way around is fine too.
>>
>> Thanks.
>>
>
> Hi Tejun, Andrew,
>
> I have just tested it on both Armada 370 and Armada XP and it failed
> at the end of the mv_platform_probe function while trying to do a
> clk_put on the clocks on the second port.
>
> Indeed the devm_phy_optional_get failed on the 1st port, so the clock
> of the second port was not allocated. What I don't get is why the
> IS_ERR check don't work here.
I found the root of my issue!
Actually devm_phy_optional_get failed but by returning -ENOSYS.
The phy lib was not selected because I have just applied the 3 patches of the series
and not the other one "ATA: SATA_MV: Add missing Kconfig select statememnt"
Could you confirm that it will be part of the 3.14-rc2 too?
Thanks,
Gregory
>
> Here the log of the crash:
>
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A
> console [ttyS0] enabled
> d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A
> sata_mv d00a0000.sata: error getting phy -38
> Unable to handle kernel NULL pointer dereference at virtual address 00000054
> pgd = c0004000
> [00000054] *pgd=00000000
> Internal error: Oops: 5 [#1] SMP ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1-00007-g5787958c945a #989
> task: ed82bb80 ti: ed83e000 task.ti: ed83e000
> PC is at __clk_put+0x1c/0x8c
> LR is at clk_prepare_lock+0xc/0xd8
> pc : [<c02c02e4>] lr : [<c02bdac8>] psr: 60000113
> sp : ed83fe18 ip : 00000000 fp : ed807b80
> r10: ed908200 r9 : ed234290 r8 : ffffffda
> r7 : ed908210 r6 : 00000000 r5 : eda5ced0 r4 : 00000000
> r3 : ed82bb80 r2 : 00000001 r1 : ed83fe08 r0 : 00000054
> Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
> Control: 10c53c7d Table: 0000406a DAC: 00000015
> Process swapper/0 (pid: 1, stack limit = 0xed83e240)
> Stack: (0xed83fe18 to 0xed840000)
> fe00: 00000001 c01f7390
> fe20: ed90ee10 00000001 c04d658c 0000001f ed90ee10 00000002 c03b4e20 00000000
> fe40: 74726f70 ed900030 00000001 ed232ca8 ed83e000 ed908210 c07d11c8 00000000
> fe60: c07d11c8 c04d658c ed83e000 c04c2510 00000000 c01c2f38 c01c2f20 ed908210
> fe80: c0809d88 c01c1ba8 00000000 ed908210 c07d11c8 ed908244 00000000 c01c1d50
> fea0: 00000000 c07d11c8 c01c1cc4 c01c03b8 ed85b7dc ed85f1b4 c07d11c8 ed234300
> fec0: c07cff90 c01c1380 c045e658 c04e4bf8 c07d11c8 c07d11c8 00000006 c04e4bf8
> fee0: c07e6d80 c01c2390 00000000 00000000 00000006 c04d65b4 c04eb3c4 c0008874
> ff00: 00000086 ef7fcd48 c04459a8 00000066 00000000 c049fd4c 00000063 ed83ff30
> ff20: c0034d48 c0034d4c 00000113 ffffffff ef7fcd55 c03ae82c 00000086 c0034f34
> ff40: c049f6ec 00000006 ef7fcd60 00000006 c07bfb70 c04eb3c4 00000006 c04e4bf8
> ff60: c07e6d80 00000086 c04e4c04 c04c2510 00000000 c04c2bec 00000006 00000006
> ff80: c04c2510 4c011108 00000000 c0393808 00000000 00000000 00000000 00000000
> ffa0: 00000000 c0393810 00000000 c000e378 00000000 00000000 00000000 00000000
> ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 8041106c 11928242
> [<c02c02e4>] (__clk_put) from [<c01f7390>] (mv_platform_probe+0x29c/0x410)
> [<c01f7390>] (mv_platform_probe) from [<c01c2f38>] (platform_drv_probe+0x18/0x48)
> [<c01c2f38>] (platform_drv_probe) from [<c01c1ba8>] (driver_probe_device+0x104/0x220)
> [<c01c1ba8>] (driver_probe_device) from [<c01c1d50>] (__driver_attach+0x8c/0x90)
> [<c01c1d50>] (__driver_attach) from [<c01c03b8>] (bus_for_each_dev+0x54/0x88)
> [<c01c03b8>] (bus_for_each_dev) from [<c01c1380>] (bus_add_driver+0xd4/0x1d0)
> [<c01c1380>] (bus_add_driver) from [<c01c2390>] (driver_register+0x78/0xf4)
> [<c01c2390>] (driver_register) from [<c04d65b4>] (mv_init+0x28/0x4c)
> [<c04d65b4>] (mv_init) from [<c0008874>] (do_one_initcall+0xe4/0x140)
> [<c0008874>] (do_one_initcall) from [<c04c2bec>] (kernel_init_freeable+0xfc/0x1c8)
> [<c04c2bec>] (kernel_init_freeable) from [<c0393810>] (kernel_init+0x8/0x118)
> [<c0393810>] (kernel_init) from [<c000e378>] (ret_from_fork+0x14/0x3c)
> Code: 8a000012 ebfff5f7 e2840054 f57ff05b (e1903f9f)
> ---[ end trace 31531e36499d4923 ]---
> Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>
>
>
> Thanks,
>
> Gregory
>
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2014-02-03 17:17 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <0140131114857.GC26148@htj.dyndns.org>
2014-02-01 14:15 ` [PATCH 1/3] drivers: phy: Make NULL a valid phy reference Andrew Lunn
2014-02-01 14:15 ` [PATCH 2/3] drivers: phy: Add support for optional phys Andrew Lunn
2014-02-03 5:51 ` Kishon Vijay Abraham I
2014-02-03 9:36 ` Andrew Lunn
2014-02-03 10:19 ` Kishon Vijay Abraham I
2014-02-03 18:00 ` [patch v2 1/3] drivers: phy: Make NULL a valid phy reference Andrew Lunn
2014-02-03 18:00 ` [patch v2 2/3] drivers: phy: Add support for optional phys Andrew Lunn
2014-02-03 18:00 ` [patch v2 3/3] ata: sata_mv: Fix probe failures with " Andrew Lunn
2014-02-03 18:02 ` Tejun Heo
2014-02-03 19:04 ` Sergei Shtylyov
2014-02-03 18:17 ` [patch v3 " Andrew Lunn
2014-02-03 19:21 ` Sergei Shtylyov
2014-02-03 19:06 ` [patch v2 1/3] drivers: phy: Make NULL a valid phy reference Sergei Shtylyov
2014-02-03 18:13 ` Andrew Lunn
2014-02-03 19:17 ` Sergei Shtylyov
2014-02-03 21:15 ` Gregory CLEMENT
2014-02-01 14:15 ` [PATCH 3/3] ata: sata_mv: Fix probe failures with optional phys Andrew Lunn
2014-02-01 14:44 ` Ezequiel Garcia
2014-02-01 14:56 ` Andrew Lunn
2014-02-01 15:36 ` Ezequiel Garcia
2014-02-03 16:03 ` Tejun Heo
2014-02-03 16:20 ` Andrew Lunn
2014-02-03 16:21 ` Tejun Heo
2014-02-03 16:21 ` Gregory CLEMENT
2014-02-03 17:17 ` Gregory CLEMENT [this message]
2014-02-03 17:23 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52EFCF37.3090704@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=kishon@ti.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).