* [PATCH v2 2/3] ata: move library code from ahci_platform.c to libahci_platform.c
2014-03-20 18:27 [PATCH v2 0/3] ata: ahci_platform related cleanups Bartlomiej Zolnierkiewicz
2014-03-20 18:27 ` [PATCH v2 1/3] ata: ahci_platform: fix ahci_platform_data->suspend method handling Bartlomiej Zolnierkiewicz
@ 2014-03-20 18:27 ` Bartlomiej Zolnierkiewicz
2014-03-20 18:27 ` [PATCH v2 3/3] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller Bartlomiej Zolnierkiewicz
[not found] ` <1395340026-3969-1-git-send-email-b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
3 siblings, 0 replies; 7+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2014-03-20 18:27 UTC (permalink / raw)
To: Tejun Heo
Cc: Hans de Goede, Sekhar Nori, Kevin Hilman, Viresh Kumar,
Shiraz Hashim, linux-ide, linux-arm-kernel, linux-kernel,
davinci-linux-open-source, spear-devel, b.zolnierkie
Move AHCI platform library code from ahci_platform.c to
libahci_platform.c and fix dependencies for ahci_st,
ahci_imx and ahci_sunxi drivers.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
v2:
- updated patch description
drivers/ata/Kconfig | 5 +-
drivers/ata/Makefile | 8 +-
drivers/ata/ahci_platform.c | 515 ---------------------------------------
drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 547 insertions(+), 522 deletions(-)
create mode 100644 drivers/ata/libahci_platform.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index c4db48c..371e8890 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -99,7 +99,6 @@ config SATA_AHCI_PLATFORM
config AHCI_ST
tristate "ST AHCI SATA support"
- depends on SATA_AHCI_PLATFORM
depends on ARCH_STI
help
This option enables support for ST AHCI SATA controller.
@@ -108,7 +107,7 @@ config AHCI_ST
config AHCI_IMX
tristate "Freescale i.MX AHCI SATA support"
- depends on SATA_AHCI_PLATFORM && MFD_SYSCON
+ depends on MFD_SYSCON
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
@@ -117,7 +116,7 @@ config AHCI_IMX
config AHCI_SUNXI
tristate "Allwinner sunxi AHCI SATA support"
- depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
+ depends on ARCH_SUNXI
help
This option enables support for the Allwinner sunxi SoC's
onboard AHCI SATA.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index e20148c..6123e64 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -4,15 +4,15 @@ obj-$(CONFIG_ATA) += libata.o
# non-SFF interface
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
-obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
+obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
-obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
-obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o
-obj-$(CONFIG_AHCI_ST) += ahci_st.o
+obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 7bd6adf..ef67e79 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -12,28 +12,15 @@
* any later version.
*/
-#include <linux/clk.h>
#include <linux/kernel.h>
-#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/pm.h>
-#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
-#include <linux/phy/phy.h>
-#include <linux/pm_runtime.h>
#include "ahci.h"
-static void ahci_host_stop(struct ata_host *host);
-
-struct ata_port_operations ahci_platform_ops = {
- .inherits = &ahci_ops,
- .host_stop = ahci_host_stop,
-};
-EXPORT_SYMBOL_GPL(ahci_platform_ops);
-
static const struct ata_port_info ahci_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
@@ -41,345 +28,6 @@ static const struct ata_port_info ahci_port_info = {
.port_ops = &ahci_platform_ops,
};
-static struct scsi_host_template ahci_platform_sht = {
- AHCI_SHT("ahci_platform"),
-};
-
-/**
- * ahci_platform_enable_clks - Enable platform clocks
- * @hpriv: host private area to store config values
- *
- * This function enables all the clks found in hpriv->clks, starting at
- * index 0. If any clk fails to enable it disables all the clks already
- * enabled in reverse order, and then returns an error.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
-{
- int c, rc;
-
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
- rc = clk_prepare_enable(hpriv->clks[c]);
- if (rc)
- goto disable_unprepare_clk;
- }
- return 0;
-
-disable_unprepare_clk:
- while (--c >= 0)
- clk_disable_unprepare(hpriv->clks[c]);
- return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
-
-/**
- * ahci_platform_disable_clks - Disable platform clocks
- * @hpriv: host private area to store config values
- *
- * This function disables all the clks found in hpriv->clks, in reverse
- * order of ahci_platform_enable_clks (starting at the end of the array).
- */
-void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
-{
- int c;
-
- for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
- if (hpriv->clks[c])
- clk_disable_unprepare(hpriv->clks[c]);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
-
-/**
- * ahci_platform_enable_resources - Enable platform resources
- * @hpriv: host private area to store config values
- *
- * This function enables all ahci_platform managed resources in the
- * following order:
- * 1) Regulator
- * 2) Clocks (through ahci_platform_enable_clks)
- * 3) Phy
- *
- * If resource enabling fails at any point the previous enabled resources
- * are disabled in reverse order.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
-{
- int rc;
-
- if (hpriv->target_pwr) {
- rc = regulator_enable(hpriv->target_pwr);
- if (rc)
- return rc;
- }
-
- rc = ahci_platform_enable_clks(hpriv);
- if (rc)
- goto disable_regulator;
-
- if (hpriv->phy) {
- rc = phy_init(hpriv->phy);
- if (rc)
- goto disable_clks;
-
- rc = phy_power_on(hpriv->phy);
- if (rc) {
- phy_exit(hpriv->phy);
- goto disable_clks;
- }
- }
-
- return 0;
-
-disable_clks:
- ahci_platform_disable_clks(hpriv);
-
-disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
- return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
-
-/**
- * ahci_platform_disable_resources - Disable platform resources
- * @hpriv: host private area to store config values
- *
- * This function disables all ahci_platform managed resources in the
- * following order:
- * 1) Phy
- * 2) Clocks (through ahci_platform_disable_clks)
- * 3) Regulator
- */
-void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
-{
- if (hpriv->phy) {
- phy_power_off(hpriv->phy);
- phy_exit(hpriv->phy);
- }
-
- ahci_platform_disable_clks(hpriv);
-
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
-
-static void ahci_platform_put_resources(struct device *dev, void *res)
-{
- struct ahci_host_priv *hpriv = res;
- int c;
-
- if (hpriv->got_runtime_pm) {
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
- }
-
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
- clk_put(hpriv->clks[c]);
-}
-
-/**
- * ahci_platform_get_resources - Get platform resources
- * @pdev: platform device to get resources for
- *
- * This function allocates an ahci_host_priv struct, and gets the following
- * resources, storing a reference to them inside the returned struct:
- *
- * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
- * 2) regulator for controlling the targets power (optional)
- * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
- * or for non devicetree enabled platforms a single clock
- * 4) phy (optional)
- *
- * RETURNS:
- * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
- */
-struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct ahci_host_priv *hpriv;
- struct clk *clk;
- int i, rc = -ENOMEM;
-
- if (!devres_open_group(dev, NULL, GFP_KERNEL))
- return ERR_PTR(-ENOMEM);
-
- hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
- GFP_KERNEL);
- if (!hpriv)
- goto err_out;
-
- devres_add(dev, hpriv);
-
- hpriv->mmio = devm_ioremap_resource(dev,
- platform_get_resource(pdev, IORESOURCE_MEM, 0));
- if (IS_ERR(hpriv->mmio)) {
- dev_err(dev, "no mmio space\n");
- rc = PTR_ERR(hpriv->mmio);
- goto err_out;
- }
-
- hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
- if (IS_ERR(hpriv->target_pwr)) {
- rc = PTR_ERR(hpriv->target_pwr);
- if (rc == -EPROBE_DEFER)
- goto err_out;
- hpriv->target_pwr = NULL;
- }
-
- for (i = 0; i < AHCI_MAX_CLKS; i++) {
- /*
- * For now we must use clk_get(dev, NULL) for the first clock,
- * because some platforms (da850, spear13xx) are not yet
- * converted to use devicetree for clocks. For new platforms
- * this is equivalent to of_clk_get(dev->of_node, 0).
- */
- if (i == 0)
- clk = clk_get(dev, NULL);
- else
- clk = of_clk_get(dev->of_node, i);
-
- if (IS_ERR(clk)) {
- rc = PTR_ERR(clk);
- if (rc == -EPROBE_DEFER)
- goto err_out;
- break;
- }
- hpriv->clks[i] = clk;
- }
-
- hpriv->phy = devm_phy_get(dev, "sata-phy");
- if (IS_ERR(hpriv->phy)) {
- rc = PTR_ERR(hpriv->phy);
- switch (rc) {
- case -ENODEV:
- case -ENOSYS:
- /* continue normally */
- hpriv->phy = NULL;
- break;
-
- case -EPROBE_DEFER:
- goto err_out;
-
- default:
- dev_err(dev, "couldn't get sata-phy\n");
- goto err_out;
- }
- }
-
- pm_runtime_enable(dev);
- pm_runtime_get_sync(dev);
- hpriv->got_runtime_pm = true;
-
- devres_remove_group(dev, NULL);
- return hpriv;
-
-err_out:
- devres_release_group(dev, NULL);
- return ERR_PTR(rc);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
-
-/**
- * ahci_platform_init_host - Bring up an ahci-platform host
- * @pdev: platform device pointer for the host
- * @hpriv: ahci-host private data for the host
- * @pi_template: template for the ata_port_info to use
- * @force_port_map: param passed to ahci_save_initial_config
- * @mask_port_map: param passed to ahci_save_initial_config
- *
- * This function does all the usual steps needed to bring up an
- * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
- * must be initialized / enabled before calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_init_host(struct platform_device *pdev,
- struct ahci_host_priv *hpriv,
- const struct ata_port_info *pi_template,
- unsigned int force_port_map,
- unsigned int mask_port_map)
-{
- struct device *dev = &pdev->dev;
- struct ata_port_info pi = *pi_template;
- const struct ata_port_info *ppi[] = { &pi, NULL };
- struct ata_host *host;
- int i, irq, n_ports, rc;
-
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
- }
-
- /* prepare host */
- hpriv->flags |= (unsigned long)pi.private_data;
-
- ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
-
- if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ;
-
- if (hpriv->cap & HOST_CAP_PMP)
- pi.flags |= ATA_FLAG_PMP;
-
- ahci_set_em_messages(hpriv, &pi);
-
- /* CAP.NP sometimes indicate the index of the last enabled
- * port, at other times, that of the last possible port, so
- * determining the maximum port number requires looking at
- * both CAP.NP and port_map.
- */
- n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
- host = ata_host_alloc_pinfo(dev, ppi, n_ports);
- if (!host)
- return -ENOMEM;
-
- host->private_data = hpriv;
-
- if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
- host->flags |= ATA_HOST_PARALLEL_SCAN;
- else
- dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
-
- if (pi.flags & ATA_FLAG_EM)
- ahci_reset_em(host);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- ata_port_desc(ap, "mmio %pR",
- platform_get_resource(pdev, IORESOURCE_MEM, 0));
- ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
-
- /* set enclosure management message type */
- if (ap->flags & ATA_FLAG_EM)
- ap->em_message_type = hpriv->em_msg_type;
-
- /* disabled/not-implemented port */
- if (!(hpriv->port_map & (1 << i)))
- ap->ops = &ata_dummy_port_ops;
- }
-
- rc = ahci_reset_controller(host);
- if (rc)
- return rc;
-
- ahci_init_controller(host);
- ahci_print_info(host, "platform");
-
- return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
- &ahci_platform_sht);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_init_host);
-
static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -420,169 +68,6 @@ disable_resources:
return rc;
}
-static void ahci_host_stop(struct ata_host *host)
-{
- struct device *dev = host->dev;
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
-
- if (pdata && pdata->exit)
- pdata->exit(dev);
-
- ahci_platform_disable_resources(hpriv);
-}
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * ahci_platform_suspend_host - Suspend an ahci-platform host
- * @dev: device pointer for the host
- *
- * This function does all the usual steps needed to suspend an
- * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
- * must be disabled after calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_suspend_host(struct device *dev)
-{
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->mmio;
- u32 ctl;
-
- if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
- dev_err(dev, "firmware update required for suspend/resume\n");
- return -EIO;
- }
-
- /*
- * AHCI spec rev1.1 section 8.3.3:
- * Software must disable interrupts prior to requesting a
- * transition of the HBA to D3 state.
- */
- ctl = readl(mmio + HOST_CTL);
- ctl &= ~HOST_IRQ_EN;
- writel(ctl, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
-
- return ata_host_suspend(host, PMSG_SUSPEND);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
-
-/**
- * ahci_platform_resume_host - Resume an ahci-platform host
- * @dev: device pointer for the host
- *
- * This function does all the usual steps needed to resume an ahci-platform
- * host, note any necessary resources (ie clks, phy, etc.) must be
- * initialized / enabled before calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_resume_host(struct device *dev)
-{
- struct ata_host *host = dev_get_drvdata(dev);
- int rc;
-
- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
- if (rc)
- return rc;
-
- ahci_init_controller(host);
- }
-
- ata_host_resume(host);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
-
-/**
- * ahci_platform_suspend - Suspend an ahci-platform device
- * @dev: the platform device to suspend
- *
- * This function suspends the host associated with the device, followed by
- * disabling all the resources of the device.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_suspend(struct device *dev)
-{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
- rc = ahci_platform_suspend_host(dev);
- if (rc)
- return rc;
-
- if (pdata && pdata->suspend) {
- rc = pdata->suspend(dev);
- if (rc)
- goto resume_host;
- }
-
- ahci_platform_disable_resources(hpriv);
-
- return 0;
-
-resume_host:
- ahci_platform_resume_host(dev);
- return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_suspend);
-
-/**
- * ahci_platform_resume - Resume an ahci-platform device
- * @dev: the platform device to resume
- *
- * This function enables all the resources of the device followed by
- * resuming the host associated with the device.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_resume(struct device *dev)
-{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
- rc = ahci_platform_enable_resources(hpriv);
- if (rc)
- return rc;
-
- if (pdata && pdata->resume) {
- rc = pdata->resume(dev);
- if (rc)
- goto disable_resources;
- }
-
- rc = ahci_platform_resume_host(dev);
- if (rc)
- goto disable_resources;
-
- /* We resumed so update PM runtime state */
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
-
- return 0;
-
-disable_resources:
- ahci_platform_disable_resources(hpriv);
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_resume);
-#endif
-
static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
ahci_platform_resume);
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
new file mode 100644
index 0000000..7cb3a85
--- /dev/null
+++ b/drivers/ata/libahci_platform.c
@@ -0,0 +1,541 @@
+/*
+ * AHCI SATA platform library
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ * Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010 MontaVista Software, LLC.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
+#include "ahci.h"
+
+static void ahci_host_stop(struct ata_host *host);
+
+struct ata_port_operations ahci_platform_ops = {
+ .inherits = &ahci_ops,
+ .host_stop = ahci_host_stop,
+};
+EXPORT_SYMBOL_GPL(ahci_platform_ops);
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT("ahci_platform"),
+};
+
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the clks found in hpriv->clks, starting at
+ * index 0. If any clk fails to enable it disables all the clks already
+ * enabled in reverse order, and then returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
+{
+ int c, rc;
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+ rc = clk_prepare_enable(hpriv->clks[c]);
+ if (rc)
+ goto disable_unprepare_clk;
+ }
+ return 0;
+
+disable_unprepare_clk:
+ while (--c >= 0)
+ clk_disable_unprepare(hpriv->clks[c]);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
+
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all the clks found in hpriv->clks, in reverse
+ * order of ahci_platform_enable_clks (starting at the end of the array).
+ */
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+ int c;
+
+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+ if (hpriv->clks[c])
+ clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in the
+ * following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
+ *
+ * If resource enabling fails at any point the previous enabled resources
+ * are disabled in reverse order.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+{
+ int rc;
+
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ return rc;
+ }
+
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_regulator;
+
+ if (hpriv->phy) {
+ rc = phy_init(hpriv->phy);
+ if (rc)
+ goto disable_clks;
+
+ rc = phy_power_on(hpriv->phy);
+ if (rc) {
+ phy_exit(hpriv->phy);
+ goto disable_clks;
+ }
+ }
+
+ return 0;
+
+disable_clks:
+ ahci_platform_disable_clks(hpriv);
+
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in the
+ * following order:
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+ if (hpriv->phy) {
+ phy_power_off(hpriv->phy);
+ phy_exit(hpriv->phy);
+ }
+
+ ahci_platform_disable_clks(hpriv);
+
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
+static void ahci_platform_put_resources(struct device *dev, void *res)
+{
+ struct ahci_host_priv *hpriv = res;
+ int c;
+
+ if (hpriv->got_runtime_pm) {
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+ }
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+ clk_put(hpriv->clks[c]);
+}
+
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the following
+ * resources, storing a reference to them inside the returned struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ * or for non devicetree enabled platforms a single clock
+ * 4) phy (optional)
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct clk *clk;
+ int i, rc = -ENOMEM;
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
+
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
+
+ devres_add(dev, hpriv);
+
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ if (IS_ERR(hpriv->mmio)) {
+ dev_err(dev, "no mmio space\n");
+ rc = PTR_ERR(hpriv->mmio);
+ goto err_out;
+ }
+
+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+ if (IS_ERR(hpriv->target_pwr)) {
+ rc = PTR_ERR(hpriv->target_pwr);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ hpriv->target_pwr = NULL;
+ }
+
+ for (i = 0; i < AHCI_MAX_CLKS; i++) {
+ /*
+ * For now we must use clk_get(dev, NULL) for the first clock,
+ * because some platforms (da850, spear13xx) are not yet
+ * converted to use devicetree for clocks. For new platforms
+ * this is equivalent to of_clk_get(dev->of_node, 0).
+ */
+ if (i == 0)
+ clk = clk_get(dev, NULL);
+ else
+ clk = of_clk_get(dev->of_node, i);
+
+ if (IS_ERR(clk)) {
+ rc = PTR_ERR(clk);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ break;
+ }
+ hpriv->clks[i] = clk;
+ }
+
+ hpriv->phy = devm_phy_get(dev, "sata-phy");
+ if (IS_ERR(hpriv->phy)) {
+ rc = PTR_ERR(hpriv->phy);
+ switch (rc) {
+ case -ENODEV:
+ case -ENOSYS:
+ /* continue normally */
+ hpriv->phy = NULL;
+ break;
+
+ case -EPROBE_DEFER:
+ goto err_out;
+
+ default:
+ dev_err(dev, "couldn't get sata-phy\n");
+ goto err_out;
+ }
+ }
+
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+ hpriv->got_runtime_pm = true;
+
+ devres_remove_group(dev, NULL);
+ return hpriv;
+
+err_out:
+ devres_release_group(dev, NULL);
+ return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_port_info pi = *pi_template;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ata_host *host;
+ int i, irq, n_ports, rc;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
+
+ /* prepare host */
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
+ if (hpriv->cap & HOST_CAP_NCQ)
+ pi.flags |= ATA_FLAG_NCQ;
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ ahci_set_em_messages(hpriv, &pi);
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
+
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_desc(ap, "mmio %pR",
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = hpriv->em_msg_type;
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ ahci_print_info(host, "platform");
+
+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static void ahci_host_stop(struct ata_host *host)
+{
+ struct device *dev = host->dev;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+
+ if (pdata && pdata->exit)
+ pdata->exit(dev);
+
+ ahci_platform_disable_resources(hpriv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * ahci_platform_suspend_host - Suspend an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to suspend an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be disabled after calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+
+ if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_err(dev, "firmware update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ /*
+ * AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+
+ return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ * ahci_platform_resume_host - Resume an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to resume an ahci-platform
+ * host, note any necessary resources (ie clks, phy, etc.) must be
+ * initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ * ahci_platform_suspend - Suspend an ahci-platform device
+ * @dev: the platform device to suspend
+ *
+ * This function suspends the host associated with the device, followed by
+ * disabling all the resources of the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_suspend_host(dev);
+ if (rc)
+ return rc;
+
+ if (pdata && pdata->suspend) {
+ rc = pdata->suspend(dev);
+ if (rc)
+ goto resume_host;
+ }
+
+ ahci_platform_disable_resources(hpriv);
+
+ return 0;
+
+resume_host:
+ ahci_platform_resume_host(dev);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
+
+/**
+ * ahci_platform_resume - Resume an ahci-platform device
+ * @dev: the platform device to resume
+ *
+ * This function enables all the resources of the device followed by
+ * resuming the host associated with the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ if (pdata && pdata->resume) {
+ rc = pdata->resume(dev);
+ if (rc)
+ goto disable_resources;
+ }
+
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
+
+ /* We resumed so update PM runtime state */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
+#endif
+
+MODULE_DESCRIPTION("AHCI SATA platform library");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
--
1.8.2.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v2 3/3] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
2014-03-20 18:27 [PATCH v2 0/3] ata: ahci_platform related cleanups Bartlomiej Zolnierkiewicz
2014-03-20 18:27 ` [PATCH v2 1/3] ata: ahci_platform: fix ahci_platform_data->suspend method handling Bartlomiej Zolnierkiewicz
2014-03-20 18:27 ` [PATCH v2 2/3] ata: move library code from ahci_platform.c to libahci_platform.c Bartlomiej Zolnierkiewicz
@ 2014-03-20 18:27 ` Bartlomiej Zolnierkiewicz
[not found] ` <1395340026-3969-4-git-send-email-b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
[not found] ` <1395340026-3969-1-git-send-email-b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
3 siblings, 1 reply; 7+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2014-03-20 18:27 UTC (permalink / raw)
To: Tejun Heo
Cc: Hans de Goede, Sekhar Nori, Kevin Hilman, Viresh Kumar,
Shiraz Hashim, linux-ide, linux-arm-kernel, linux-kernel,
davinci-linux-open-source, spear-devel, b.zolnierkie
Add the new ahci_da850 host driver and remove the deprecated
ahci_platform_data platform code.
Please note that the new driver doesn't have the superfluous
clock control code as clock is already handled by the generic
AHCI platform library code.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
v2:
- dropped the experimental tag from the config option help
- fixed SYSCFG1 memory resource handling
- hardcoded the multiplier data and added a note about it
- used readl()/writel() instead of __raw_readl()/__raw_writel()
- dropped the superflous clock control
- cleaned up da850_sata_init()
- changed the platform device name and removed the platform ids table
- removed the deprecated ahci_platform_data platform code
- updated the patch description
arch/arm/mach-davinci/devices-da8xx.c | 99 +++--------------------------
drivers/ata/Kconfig | 9 +++
drivers/ata/Makefile | 1 +
drivers/ata/ahci_da850.c | 116 ++++++++++++++++++++++++++++++++++
4 files changed, 134 insertions(+), 91 deletions(-)
create mode 100644 drivers/ata/ahci_da850.c
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 0486cdf2..72bb8d6 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -1020,7 +1020,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
}
#ifdef CONFIG_ARCH_DAVINCI_DA850
-
static struct resource da850_sata_resources[] = {
{
.start = DA850_SATA_BASE,
@@ -1028,103 +1027,22 @@ static struct resource da850_sata_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = DA8XX_SYSCFG1_BASE,
+ .end = DA8XX_SYSCFG1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
.start = IRQ_DA850_SATAINT,
.flags = IORESOURCE_IRQ,
},
};
-/* SATA PHY Control Register offset from AHCI base */
-#define SATA_P0PHYCR_REG 0x178
-
-#define SATA_PHY_MPY(x) ((x) << 0)
-#define SATA_PHY_LOS(x) ((x) << 6)
-#define SATA_PHY_RXCDR(x) ((x) << 10)
-#define SATA_PHY_RXEQ(x) ((x) << 13)
-#define SATA_PHY_TXSWING(x) ((x) << 19)
-#define SATA_PHY_ENPLL(x) ((x) << 31)
-
-static struct clk *da850_sata_clk;
-static unsigned long da850_sata_refclkpn;
-
-/* Supported DA850 SATA crystal frequencies */
-#define KHZ_TO_HZ(freq) ((freq) * 1000)
-static unsigned long da850_sata_xtal[] = {
- KHZ_TO_HZ(300000),
- KHZ_TO_HZ(250000),
- 0, /* Reserved */
- KHZ_TO_HZ(187500),
- KHZ_TO_HZ(150000),
- KHZ_TO_HZ(125000),
- KHZ_TO_HZ(120000),
- KHZ_TO_HZ(100000),
- KHZ_TO_HZ(75000),
- KHZ_TO_HZ(60000),
-};
-
-static int da850_sata_init(struct device *dev, void __iomem *addr)
-{
- int i, ret;
- unsigned int val;
-
- da850_sata_clk = clk_get(dev, NULL);
- if (IS_ERR(da850_sata_clk))
- return PTR_ERR(da850_sata_clk);
-
- ret = clk_prepare_enable(da850_sata_clk);
- if (ret)
- goto err0;
-
- /* Enable SATA clock receiver */
- val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
- val &= ~BIT(0);
- __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-
- /* Get the multiplier needed for 1.5GHz PLL output */
- for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
- if (da850_sata_xtal[i] == da850_sata_refclkpn)
- break;
-
- if (i == ARRAY_SIZE(da850_sata_xtal)) {
- ret = -EINVAL;
- goto err1;
- }
-
- val = SATA_PHY_MPY(i + 1) |
- SATA_PHY_LOS(1) |
- SATA_PHY_RXCDR(4) |
- SATA_PHY_RXEQ(1) |
- SATA_PHY_TXSWING(3) |
- SATA_PHY_ENPLL(1);
-
- __raw_writel(val, addr + SATA_P0PHYCR_REG);
-
- return 0;
-
-err1:
- clk_disable_unprepare(da850_sata_clk);
-err0:
- clk_put(da850_sata_clk);
- return ret;
-}
-
-static void da850_sata_exit(struct device *dev)
-{
- clk_disable_unprepare(da850_sata_clk);
- clk_put(da850_sata_clk);
-}
-
-static struct ahci_platform_data da850_sata_pdata = {
- .init = da850_sata_init,
- .exit = da850_sata_exit,
-};
-
static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
static struct platform_device da850_sata_device = {
- .name = "ahci",
+ .name = "ahci_da850",
.id = -1,
.dev = {
- .platform_data = &da850_sata_pdata,
.dma_mask = &da850_sata_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
@@ -1134,9 +1052,8 @@ static struct platform_device da850_sata_device = {
int __init da850_register_sata(unsigned long refclkpn)
{
- da850_sata_refclkpn = refclkpn;
- if (!da850_sata_refclkpn)
- return -EINVAL;
+ /* please see comment in drivers/ata/ahci_da850.c */
+ BUG_ON(refclkpn != 100 * 1000 * 1000);
return platform_device_register(&da850_sata_device);
}
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 371e8890..4b71e73 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
If unsure, say N.
+config AHCI_DA850
+ tristate "DaVinci DA850 AHCI SATA support"
+ depends on ARCH_DAVINCI_DA850
+ help
+ This option enables support for the DaVinci DA850 SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
config AHCI_ST
tristate "ST AHCI SATA support"
depends on ARCH_STI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 6123e64..0646d83 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
+obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
new file mode 100644
index 0000000..899270a
--- /dev/null
+++ b/drivers/ata/ahci_da850.c
@@ -0,0 +1,116 @@
+/*
+ * DaVinci DA850 AHCI SATA platform driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+#define DA8XX_PWRDN_REG 0x18
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG 0x178
+
+#define SATA_PHY_MPY(x) ((x) << 0)
+#define SATA_PHY_LOS(x) ((x) << 6)
+#define SATA_PHY_RXCDR(x) ((x) << 10)
+#define SATA_PHY_RXEQ(x) ((x) << 13)
+#define SATA_PHY_TXSWING(x) ((x) << 19)
+#define SATA_PHY_ENPLL(x) ((x) << 31)
+
+/*
+ * The multiplier needed for 1.5GHz PLL output.
+ *
+ * NOTE: This is currently hardcoded to be suitable for 100MHz crystal
+ * frequency (which is used by DA850 EVM board) and may need to be changed
+ * if you would like to use this driver on some other board.
+ */
+#define DA850_SATA_CLK_MULTIPLIER 7
+
+static void da850_sata_init(struct device *dev, void __iomem *syscfg1_base,
+ void __iomem *ahci_base)
+{
+ unsigned int val;
+
+ /* Enable SATA clock receiver */
+ val = readl(syscfg1_base + DA8XX_PWRDN_REG);
+ val &= ~BIT(0);
+ writel(val, syscfg1_base + DA8XX_PWRDN_REG);
+
+ val = SATA_PHY_MPY(DA850_SATA_CLK_MULTIPLIER + 1) | SATA_PHY_LOS(1) |
+ SATA_PHY_RXCDR(4) | SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) |
+ SATA_PHY_ENPLL(1);
+
+ writel(val, ahci_base + SATA_P0PHYCR_REG);
+}
+
+static const struct ata_port_info ahci_da850_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static int ahci_da850_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct resource *res;
+ void __iomem *syscfg1_base;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res)
+ goto disable_resources;
+
+ syscfg1_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!syscfg1_base)
+ goto disable_resources;
+
+ da850_sata_init(dev, syscfg1_base, hpriv->mmio);
+
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
+ ahci_platform_resume);
+
+static struct platform_driver ahci_da850_driver = {
+ .probe = ahci_da850_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "ahci_da850",
+ .owner = THIS_MODULE,
+ .pm = &ahci_da850_pm_ops,
+ },
+};
+module_platform_driver(ahci_da850_driver);
+
+MODULE_DESCRIPTION("DaVinci DA850 AHCI SATA platform driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
+MODULE_LICENSE("GPL");
--
1.8.2.3
^ permalink raw reply related [flat|nested] 7+ messages in thread