[PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs

[PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs

[Nicholas Mc Guire]

Use jiffies_to_msecs for converting jiffies as it handles all of the corner
cases reliably and also helps readability. The printk format is fixed up 
as jiffies_to_msecs returns unsigned int not unsigned long.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
---

v2: change printk format string from %d to %u as suggested by
    Joe Perches <joe@perches.com>.

Note that this patch will give a checkpatch warning due to "quoted string 
split across lines" but thats not related to this change.

This was only compile tested with x86_64_defconfig + CONFIG_IDE=m,
CONFIG_BLK_DEV_IDETAPE=m

Patch is against 4.0-rc1 (localversion-next is -next-20150303)

 drivers/ide/ide-tape.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1793aea..d9ce376 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1793,11 +1793,11 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	tape->best_dsc_rw_freq = clamp_t(unsigned long, t, IDETAPE_DSC_RW_MIN,
 					 IDETAPE_DSC_RW_MAX);
 	printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
-		"%lums tDSC%s\n",
+		"%ums tDSC%s\n",
 		drive->name, tape->name, *(u16 *)&tape->caps[14],
 		(*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
 		tape->buffer_size / 1024,
-		tape->best_dsc_rw_freq * 1000 / HZ,
+		jiffies_to_msecs(tape->best_dsc_rw_freq),
 		(drive->dev_flags & IDE_DFLAG_USING_DMA) ? ", DMA" : "");
 
 	ide_proc_register_driver(drive, tape->driver);
-- 
1.7.10.4

Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs

[Sergei Shtylyov]

Hello.

On 3/3/2015 1:52 PM, Nicholas Mc Guire wrote:

> Use jiffies_to_msecs for converting jiffies as it handles all of the corner
> cases reliably and also helps readability. The printk format is fixed up
> as jiffies_to_msecs returns unsigned int not unsigned long.

> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
> ---

> v2: change printk format string from %d to %u as suggested by
>      Joe Perches <joe@perches.com>.

> Note that this patch will give a checkpatch warning due to "quoted string
> split across lines" but thats not related to this change.

> This was only compile tested with x86_64_defconfig + CONFIG_IDE=m,
> CONFIG_BLK_DEV_IDETAPE=m

> Patch is against 4.0-rc1 (localversion-next is -next-20150303)
>
>   drivers/ide/ide-tape.c |    4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

    The driver is called ide-tape.c, yet your subject prefix is "ide_tape:".

WBR, Sergei

Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs

[Nicholas Mc Guire]

On Tue, 03 Mar 2015, Sergei Shtylyov wrote:

> Hello.
>
> On 3/3/2015 1:52 PM, Nicholas Mc Guire wrote:
>
>> Use jiffies_to_msecs for converting jiffies as it handles all of the corner
>> cases reliably and also helps readability. The printk format is fixed up
>> as jiffies_to_msecs returns unsigned int not unsigned long.
>
>> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
>> ---
>
>> v2: change printk format string from %d to %u as suggested by
>>      Joe Perches <joe@perches.com>.
>
>> Note that this patch will give a checkpatch warning due to "quoted string
>> split across lines" but thats not related to this change.
>
>> This was only compile tested with x86_64_defconfig + CONFIG_IDE=m,
>> CONFIG_BLK_DEV_IDETAPE=m
>
>> Patch is against 4.0-rc1 (localversion-next is -next-20150303)
>>
>>   drivers/ide/ide-tape.c |    4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>
>    The driver is called ide-tape.c, yet your subject prefix is "ide_tape:".
>
that is based on the output of git log --oneline and it seems that it is
the common prefix - in fact it seem rare to use the c-file name as prefix
for patch subjects.

thx!
ofrat

Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs

[Sergei Shtylyov]

On 3/3/2015 5:15 PM, Nicholas Mc Guire wrote:

>>> Use jiffies_to_msecs for converting jiffies as it handles all of the corner
>>> cases reliably and also helps readability. The printk format is fixed up
>>> as jiffies_to_msecs returns unsigned int not unsigned long.

>>> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
>>> ---

>>> v2: change printk format string from %d to %u as suggested by
>>>       Joe Perches <joe@perches.com>.

>>> Note that this patch will give a checkpatch warning due to "quoted string
>>> split across lines" but thats not related to this change.

>>> This was only compile tested with x86_64_defconfig + CONFIG_IDE=m,
>>> CONFIG_BLK_DEV_IDETAPE=m

>>> Patch is against 4.0-rc1 (localversion-next is -next-20150303)

>>>    drivers/ide/ide-tape.c |    4 ++--
>>>    1 file changed, 2 insertions(+), 2 deletions(-)

>>     The driver is called ide-tape.c, yet your subject prefix is "ide_tape:".

> that is based on the output of git log --oneline and it seems that it is
> the common prefix - in fact it seem rare to use the c-file name as prefix
> for patch subjects.

    Huh, what else is to be used for the prefix if not the file name?
    I would really like the prefix to be changed to "ide-tape", however it's 
up for DaveM, of course.

> thx!
> ofrat

WBR, Sergei

Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs

[Geert Uytterhoeven]

On Tue, Mar 3, 2015 at 3:11 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
>>   drivers/ide/ide-tape.c |    4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>
>
>    The driver is called ide-tape.c, yet your subject prefix is "ide_tape:".

FWIW, modprobe considers dashes and underscores identical,
so if it's compiled as a module, it can be loaded using both
"modprobe ide-tape.ko" and "modprobe ide_tape.ko".

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs

[David Miller]

From: Nicholas Mc Guire <hofrat@osadl.org>
Date: Tue,  3 Mar 2015 05:52:51 -0500

> Use jiffies_to_msecs for converting jiffies as it handles all of the corner
> cases reliably and also helps readability. The printk format is fixed up 
> as jiffies_to_msecs returns unsigned int not unsigned long.
> 
> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
> ---
> 
> v2: change printk format string from %d to %u as suggested by
>     Joe Perches <joe@perches.com>.

Applied, thanks.