From: Fleck <Fleck@Rullz.lv>
To: linux-ide@vger.kernel.org, lkml@vger.kernel.org
Subject: eSata problem
Date: Sun, 08 Mar 2015 01:21:34 +0200 [thread overview]
Message-ID: <54FB87FE.3050109@Rullz.lv> (raw)
Hello, I have got the following eSata 4-bay device:
http://www.mediasonic.ca/product.php?id=1357292050
Motherboard Asus M5A97 EVO R2.0 with eSata controler: 04:00.0 SATA
controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
As you can see, the 4-bay device needs Port Multiplier, in Windows 7
everything works fine (just saying, hardware is OK), all 4 disk drives
are detected, but in linux not a single drive is detected! Here is dmesg
output after powering 4-bay device off and on again:
[ 1438.120315] ata11: exception Emask 0x10 SAct 0x0 SErr 0x10002 action
0xe frozen
[ 1438.120323] ata11: irq_stat 0x00400000, PHY RDY changed
[ 1438.120329] ata11: SError: { RecovComm PHYRdyChg }
[ 1438.120340] ata11: hard resetting link
[ 1438.842876] ata11: SATA link down (SStatus 0 SControl 300)
[ 1438.842896] ata11: EH complete
[ 1449.670083] ata11: exception Emask 0x10 SAct 0x0 SErr 0x4040000
action 0xe frozen
[ 1449.670091] ata11: irq_stat 0x00000040, connection status changed
[ 1449.670097] ata11: SError: { CommWake DevExch }
[ 1449.670107] ata11: hard resetting link
[ 1455.601866] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1460.599233] ata11.00: qc timeout (cmd 0xec)
[ 1460.599247] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1460.599255] ata11: hard resetting link
[ 1461.090989] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1471.085591] ata11.00: qc timeout (cmd 0xec)
[ 1471.085605] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1471.085636] ata11: limiting SATA link speed to 1.5 Gbps
[ 1471.085642] ata11: hard resetting link
[ 1471.577336] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1501.561182] ata11.00: qc timeout (cmd 0xec)
[ 1501.561196] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1501.561204] ata11: hard resetting link
[ 1502.052960] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1502.052980] ata11: EH complete
Any ideas, how can I get this device working in linux?
BTW got this mail in #kernel channel @ freenode! :)
Thanks, best regards - Fleck
reply other threads:[~2015-03-07 23:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54FB87FE.3050109@Rullz.lv \
--to=fleck@rullz.lv \
--cc=linux-ide@vger.kernel.org \
--cc=lkml@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).