From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: Re: [PATCH 04/10] phy: phy_brcmstb_sata: make the driver buildable on BMIPS_GENERIC Date: Fri, 23 Oct 2015 20:17:07 +0530 Message-ID: <562A486B.5020500@ti.com> References: <1445564663-66824-1-git-send-email-jaedon.shin@gmail.com> <1445564663-66824-5-git-send-email-jaedon.shin@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit Return-path: Received: from comal.ext.ti.com ([198.47.26.152]:33753 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751726AbbJWOrR (ORCPT ); Fri, 23 Oct 2015 10:47:17 -0400 In-Reply-To: <1445564663-66824-5-git-send-email-jaedon.shin@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Jaedon Shin , Tejun Heo , Ralf Baechle , Florian Fainelli , Rob Herring Cc: linux-ide@vger.kernel.org, linux-mips@linux-mips.org, devicetree@vger.kernel.org +Brian Norris Hi, On Friday 23 October 2015 07:14 AM, Jaedon Shin wrote: > The BCM7xxx ARM and MIPS platforms share a similar hardware block for AHCI > SATA3 PHY. > > Signed-off-by: Jaedon Shin > --- > drivers/phy/Kconfig | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 47da573d0bab..c83e48661fd7 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -364,11 +364,11 @@ config PHY_TUSB1210 > > config PHY_BRCMSTB_SATA > tristate "Broadcom STB SATA PHY driver" > - depends on ARCH_BRCMSTB > + depends on ARCH_BRCMSTB || BMIPS_GENERIC Nice to see the same driver is been used across multiple platforms. Cc'ed Brian who is the author of brcmstb-sata.c Thanks Kishon > depends on OF > select GENERIC_PHY > help > - Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. > + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs. > Likely useful only with CONFIG_SATA_BRCMSTB enabled. > > endmenu >