From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartlomiej Zolnierkiewicz Subject: Re: ATIIXP support (SATA, ATA133) Date: Fri, 17 Dec 2004 12:44:28 +0100 Message-ID: <58cb370e041217034449d1b2a9@mail.gmail.com> References: <878y7x2qhq.fsf@kosh.ultra.csn.tu-chemnitz.de> Reply-To: Bartlomiej Zolnierkiewicz Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from wproxy.gmail.com ([64.233.184.199]:5966 "EHLO wproxy.gmail.com") by vger.kernel.org with ESMTP id S262788AbULQLo3 (ORCPT ); Fri, 17 Dec 2004 06:44:29 -0500 Received: by wproxy.gmail.com with SMTP id 36so43400wra for ; Fri, 17 Dec 2004 03:44:28 -0800 (PST) In-Reply-To: <878y7x2qhq.fsf@kosh.ultra.csn.tu-chemnitz.de> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Enrico Scholz Cc: linux-ide@vger.kernel.org On Fri, 17 Dec 2004 11:01:05 +0100, Enrico Scholz wrote: > Hello, Hi, > are there plans to support newer ATI IXP chipsets? I mean: > > * PCI 1002:4376 which is an ATA133 controller; this should probably work > with the already existing drivers/ide/pci/atiixp.c driver Have you tested it? > * PCI 1002:4379 which is a SATA controller; I verified that it works > with the drivers/ide/pci/atiixp.c driver of 2.6.9 also. Care to make a patches for 1002:4376 and 1002:4379? > * PCI 1002:436E and 1002:437A which are both SATA controller. I saw them > in the windoze driver file only and can not tell whether they work > with atiixp.c > > Although at least one SATA chipset works with the IDE driver, an own > driver using libata would be the better solution. Does there exist > already something which can be tested? At least some of ATi SATA chipsets are based on Silicon Image SATA so it should be possible to use sata_sil.c for them. Bartlomiej