From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Tejun Heo <tj@home-tj.org>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: [PATCH 2.6.11-rc2 02/29] ide: cleanup it8172
Date: Thu, 3 Feb 2005 01:00:15 +0100 [thread overview]
Message-ID: <58cb370e0502021600506696ba@mail.gmail.com> (raw)
In-Reply-To: <20050202024454.GC621@htj.dyndns.org>
On Wed, 2 Feb 2005 11:44:54 +0900, Tejun Heo <tj@home-tj.org> wrote:
> > 02_ide_cleanup_it8172.patch
> >
> > In drivers/ide/pci/it8172.h, it8172_ratefilter() and
> > init_setup_it8172() are declared and the latter is referenced
> > in it8172_chipsets. Both functions are not defined or used
> > anywhere. This patch removes the prototypes and reference.
> > it8172 should be compilable now.
>
> Signed-off-by: Tejun Heo <tj@home-tj.org>
applied, also this trivial patch is needed to fix it8172 build:
diff -Nru a/drivers/ide/pci/it8172.c b/drivers/ide/pci/it8172.c
--- a/drivers/ide/pci/it8172.c 2005-02-03 01:00:22 +01:00
+++ b/drivers/ide/pci/it8172.c 2005-02-03 01:00:22 +01:00
@@ -56,7 +56,7 @@
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- int is_slave = (hwif->drives[1] == drive);
+ int is_slave = (&hwif->drives[1] == drive);
unsigned long flags;
u16 drive_enables;
u32 drive_timing;
@@ -94,7 +94,7 @@
}
pci_write_config_word(dev, 0x40, drive_enables);
- spin_unlock_irqrestore(&ide_lock, flags)
+ spin_unlock_irqrestore(&ide_lock, flags);
}
static u8 it8172_dma_2_pio (u8 xfer_rate)
next prev parent reply other threads:[~2005-02-03 0:00 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-02 2:40 [PATCH 2.6.11-rc2 0/29] ide: driver updates Tejun Heo
2005-02-02 2:43 ` [PATCH 2.6.11-rc2 01/29] ide: remove adma100 Tejun Heo
2005-02-02 23:43 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:44 ` [PATCH 2.6.11-rc2 02/29] ide: cleanup it8172 Tejun Heo
2005-02-03 0:00 ` Bartlomiej Zolnierkiewicz [this message]
2005-02-02 2:45 ` [PATCH 2.6.11-rc2 03/29] ide: cleanup opti621 Tejun Heo
2005-02-03 0:05 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:46 ` [PATCH 2.6.11-rc2 04/29] ide: cleanup piix Tejun Heo
2005-02-03 0:20 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:47 ` [PATCH 2.6.11-rc2 05/29] ide: merge pci driver .h's into .c's Tejun Heo
2005-02-04 2:00 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:48 ` [PATCH 2.6.11-rc2 06/29] ide: IDE_CONTROL_REG cleanup Tejun Heo
2005-02-03 0:23 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:49 ` [PATCH 2.6.11-rc2 07/29] ide: ide_reg_valid_t endian fix Tejun Heo
2005-02-02 2:50 ` [PATCH 2.6.11-rc2 8/29] ide: driver updates Tejun Heo
2005-02-02 3:14 ` [PATCH 2.6.11-rc2 08/29] ide: do_identify() string termination fix Tejun Heo
2005-02-02 2:51 ` [PATCH 2.6.11-rc2 09/29] ide: __ide_do_rw_disk() lba48 dma check fix Tejun Heo
2005-02-03 0:33 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:52 ` [PATCH 2.6.11-rc2 10/29] ide: __ide_do_rw_disk() return value fix Tejun Heo
2005-02-03 0:36 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:54 ` [PATCH 2.6.11-rc2 11/29] ide: add ide_drive_t.sleeping Tejun Heo
2005-02-03 0:47 ` Bartlomiej Zolnierkiewicz
2005-02-03 11:37 ` Jens Axboe
2005-02-03 13:30 ` Bartlomiej Zolnierkiewicz
2005-02-03 13:32 ` Jens Axboe
2005-02-03 13:35 ` Bartlomiej Zolnierkiewicz
2005-02-03 22:20 ` Tejun Heo
2005-02-04 8:39 ` Jens Axboe
2005-02-03 14:13 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:55 ` [PATCH 2.6.11-rc2 12/29] ide: add ide_hwgroup_t.polling Tejun Heo
2005-02-03 0:42 ` Bartlomiej Zolnierkiewicz
2005-02-03 14:20 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:56 ` [PATCH 2.6.11-rc2 13/29] ide: use time_after() macro Tejun Heo
2005-02-03 1:07 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:57 ` [PATCH 2.6.11-rc2 14/29] ide: remove NULL checking in ide_error() Tejun Heo
2005-02-03 1:14 ` Bartlomiej Zolnierkiewicz
2005-02-02 2:58 ` [PATCH 2.6.11-rc2 15/29] ide: flagged_taskfile() data byte order fix Tejun Heo
2005-02-02 3:00 ` [PATCH 2.6.11-rc2 16/29] ide: flagged_taskfile select register dev bit masking Tejun Heo
2005-02-02 3:01 ` [PATCH 2.6.11-rc2 17/29] ide: flagged_taskfile() tf_out_flags.b.select check Tejun Heo
2005-02-02 3:02 ` [PATCH 2.6.11-rc2 18/29] ide: comment fixes Tejun Heo
2005-02-03 1:17 ` Bartlomiej Zolnierkiewicz
2005-02-02 3:03 ` [PATCH 2.6.11-rc2 19/29] ide: ide_diag_taskfile() rq initialization fix Tejun Heo
2005-02-02 3:05 ` [PATCH 2.6.11-rc2 20/29] ide: task_end_request() fix Tejun Heo
2005-02-02 3:06 ` [PATCH 2.6.11-rc2 21/29] ide: Merge do_rw_taskfile() and flagged_taskfile() Tejun Heo
2005-02-03 18:39 ` Bartlomiej Zolnierkiewicz
2005-02-04 0:30 ` Tejun Heo
2005-02-02 3:07 ` [PATCH 2.6.11-rc2 22/29] ide: convert REQ_DRIVE_TASK to REQ_DRIVE_TASKFILE Tejun Heo
2005-02-03 17:30 ` Bartlomiej Zolnierkiewicz
2005-02-04 0:54 ` Tejun Heo
2005-02-04 1:50 ` Bartlomiej Zolnierkiewicz
2005-02-02 3:08 ` [PATCH 2.6.11-rc2 23/29] ide: map ide_task_ioctl() to ide_taskfile_ioctl() Tejun Heo
2005-02-03 17:37 ` Bartlomiej Zolnierkiewicz
2005-02-03 17:38 ` Bartlomiej Zolnierkiewicz
2005-02-02 3:08 ` [PATCH 2.6.11-rc2 24/29] ide: remove REQ_DRIVE_TASK handling Tejun Heo
2005-02-02 3:10 ` [PATCH 2.6.11-rc2 26/29] ide: map ide_cmd_ioctl() to ide_taskfile_ioctl() Tejun Heo
2005-02-03 17:54 ` Bartlomiej Zolnierkiewicz
2005-02-04 2:11 ` Tejun Heo
2005-02-04 2:22 ` Bartlomiej Zolnierkiewicz
2005-02-02 3:11 ` [PATCH 2.6.11-rc2 27/29] ide: remove REQ_DRIVE_CMD handling Tejun Heo
2005-02-02 3:11 ` [PATCH 2.6.11-rc2 28/29] ide: ide_init_drive_cmd() now defaults to REQ_DRIVE_TASKFILE Tejun Heo
2005-02-02 3:12 ` [PATCH 2.6.11-rc2 29/29] ide: make data_phase explicit in NO_DATA cases Tejun Heo
2005-02-03 17:43 ` Bartlomiej Zolnierkiewicz
2005-02-04 0:59 ` Tejun Heo
2005-02-04 1:37 ` Bartlomiej Zolnierkiewicz
2005-02-02 3:15 ` [PATCH 2.6.11-rc2 25/29] ide: convert REQ_DRIVE_CMD to REQ_DRIVE_TASKFILE Tejun Heo
2005-02-03 17:46 ` Bartlomiej Zolnierkiewicz
2005-02-04 1:06 ` Tejun Heo
2005-02-04 1:40 ` Bartlomiej Zolnierkiewicz
2005-02-02 8:31 ` [PATCH 2.6.11-rc2 0/29] ide: driver updates Jeff Garzik
2005-02-03 10:03 ` Alan Cox
2005-02-03 1:03 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58cb370e0502021600506696ba@mail.gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@home-tj.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).