From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Daniel Egger <de@axiros.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: Booting from SATA disables IDE?
Date: Sun, 3 Apr 2005 11:57:43 +0200 [thread overview]
Message-ID: <58cb370e0504030157414470af@mail.gmail.com> (raw)
In-Reply-To: <1921eeb1e202db77fdccb439f85ac532@axiros.com>
Hi,
On Apr 1, 2005 3:42 PM, Daniel Egger <de@axiros.com> wrote:
> libata version 1.10 loaded.
> sata_via version 1.0
> ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
> sata_via(0000:00:0f.0): routed to hard irq line 11
> ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
> ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063
> 88:407f
> ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
> ata1: dev 0 configured for UDMA/133
> scsi0 : sata_via
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_via
> elevator: using anticipatory as default io scheduler
> Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
> SCSI device sda: drive cache: write back
> /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Can we see also messages for non working case
and IDE messages for both cases?
Bartlomiej
next prev parent reply other threads:[~2005-04-03 9:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-01 13:42 Booting from SATA disables IDE? Daniel Egger
2005-04-01 17:04 ` Jeff Garzik
2005-04-01 20:35 ` Daniel Egger
2005-04-02 16:36 ` Daniel Egger
2005-04-03 8:42 ` Booting from SATA disables IDE? (reproduced) Daniel Egger
2005-04-03 9:57 ` Bartlomiej Zolnierkiewicz [this message]
2005-04-03 11:20 ` Booting from SATA disables IDE? Daniel Egger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58cb370e0504030157414470af@mail.gmail.com \
--to=bzolnier@gmail.com \
--cc=de@axiros.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox