From: Damien Le Moal <dlemoal@kernel.org>
To: Niklas Cassel <cassel@kernel.org>
Cc: Werner Fischer <devlists@wefi.net>,
Daniel Drake <drake@endlessos.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Jian-Hong Pan <jhp@endlessos.org>,
Dieter Mummenschanz <dmummenschanz@web.de>,
linux-ide@vger.kernel.org
Subject: Re: [PATCH 1/5] ata: ahci: move marking of external port earlier
Date: Fri, 2 Feb 2024 10:52:49 +0900 [thread overview]
Message-ID: <5e422443-06f5-4885-9738-84419514a9af@kernel.org> (raw)
In-Reply-To: <20240201161507.1147521-2-cassel@kernel.org>
On 2/2/24 01:14, Niklas Cassel wrote:
> Move the marking of an external port earlier in the call chain.
> This is needed for further cleanups.
> No functional change intended.
>
> Signed-off-by: Niklas Cassel <cassel@kernel.org>
> ---
> drivers/ata/ahci.c | 14 ++++++++++++++
> drivers/ata/libahci.c | 7 -------
> 2 files changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index da2e74fce2d9..157ab88bdf75 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -1642,6 +1642,17 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
> return pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
> }
>
> +static void ahci_mark_external_port(struct ata_port *ap)
> +{
> + struct ahci_host_priv *hpriv = ap->host->private_data;
> + void __iomem *port_mmio = ahci_port_base(ap);
> + u32 tmp;
> +
> + tmp = readl(port_mmio + PORT_CMD);
> + if ((tmp & PORT_CMD_ESP) && (hpriv->cap & HOST_CAP_SXS))
> + ap->pflags |= ATA_PFLAG_EXTERNAL;
> +}
> +
> static void ahci_update_initial_lpm_policy(struct ata_port *ap,
> struct ahci_host_priv *hpriv)
> {
> @@ -1934,6 +1945,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> if (ap->flags & ATA_FLAG_EM)
> ap->em_message_type = hpriv->em_msg_type;
>
> + /* mark esata ports */
> + ahci_mark_external_port(ap);
Nit: the comment is rather useless as the function name is clear. It is also
rather incorrect since this is for both esata as well as hot-plug capable ports
(later in the series). So maybe drop it ?
Otherwise, looks OK to me.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
> +
> ahci_update_initial_lpm_policy(ap, hpriv);
>
> /* disabled/not-implemented port */
> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
> index 1a63200ea437..fca376f03c9e 100644
> --- a/drivers/ata/libahci.c
> +++ b/drivers/ata/libahci.c
> @@ -1280,10 +1280,8 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
> int port_no, void __iomem *mmio,
> void __iomem *port_mmio)
> {
> - struct ahci_host_priv *hpriv = ap->host->private_data;
> const char *emsg = NULL;
> int rc;
> - u32 tmp;
>
> /* make sure port is not active */
> rc = ahci_deinit_port(ap, &emsg);
> @@ -1291,11 +1289,6 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
> dev_warn(dev, "%s (%d)\n", emsg, rc);
>
> ahci_port_clear_pending_irq(ap);
> -
> - /* mark esata ports */
> - tmp = readl(port_mmio + PORT_CMD);
> - if ((tmp & PORT_CMD_ESP) && (hpriv->cap & HOST_CAP_SXS))
> - ap->pflags |= ATA_PFLAG_EXTERNAL;
> }
>
> void ahci_init_controller(struct ata_host *host)
--
Damien Le Moal
Western Digital Research
next prev parent reply other threads:[~2024-02-02 1:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-01 16:14 [PATCH 0/5] drop low power policy board type Niklas Cassel
2024-02-01 16:14 ` [PATCH 1/5] ata: ahci: move marking of external port earlier Niklas Cassel
2024-02-02 1:52 ` Damien Le Moal [this message]
2024-02-01 16:14 ` [PATCH 2/5] ata: ahci: a hotplug capable port is an external port Niklas Cassel
2024-02-02 1:54 ` Damien Le Moal
2024-02-01 16:15 ` [PATCH 3/5] ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy() Niklas Cassel
2024-02-02 1:57 ` Damien Le Moal
2024-02-01 16:15 ` [PATCH 4/5] ata: ahci: do not enable LPM on external ports Niklas Cassel
2024-02-02 2:09 ` Damien Le Moal
2024-02-01 16:15 ` [PATCH 5/5] ata: ahci: Drop low power policy board type Niklas Cassel
2024-02-02 2:12 ` Damien Le Moal
2024-02-02 2:13 ` [PATCH 0/5] drop " Damien Le Moal
2024-02-02 13:13 ` Werner Fischer
2024-02-02 15:12 ` Mario Limonciello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5e422443-06f5-4885-9738-84419514a9af@kernel.org \
--to=dlemoal@kernel.org \
--cc=cassel@kernel.org \
--cc=devlists@wefi.net \
--cc=dmummenschanz@web.de \
--cc=drake@endlessos.org \
--cc=jhp@endlessos.org \
--cc=linux-ide@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox