From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Michal Piotrowski" Subject: 2.6.21-rc3-git4 ata1.00: qc timeout (cmd 0xef) (crashdump kernel) Date: Fri, 9 Mar 2007 17:57:32 +0100 Message-ID: <6bffcb0e0703090857r14eda34bj92f3fd1d0008edb8@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from wr-out-0506.google.com ([64.233.184.233]:52525 "EHLO wr-out-0506.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1767409AbXCIQ5j (ORCPT ); Fri, 9 Mar 2007 11:57:39 -0500 Received: by wr-out-0506.google.com with SMTP id 71so1376062wri for ; Fri, 09 Mar 2007 08:57:38 -0800 (PST) Content-Disposition: inline Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Jeff Garzik Cc: linux-ide@vger.kernel.org Hi Jeff, I've got some problems with my SATA controller on crashdump kernel. Calling initcall 0xc1916081: fc_transport_init+0x0/0x35() Calling initcall 0xc19160b6: init_sd+0x0/0xbc() Calling initcall 0xc19161ec: piix_init+0x0/0x27() ata_piix 0000:00:1f.2: version 2.10 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 5 ata2: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 5 scsi0 : ata_piix PM: Adding info for No Bus:host0 ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: qc timeout (cmd 0xef) ata1.00: failed to set xfermode (err_mask=0x4) ata1: failed to recover some devices, retrying in 5 secs ata1.00: qc timeout (cmd 0xef) ata1.00: failed to set xfermode (err_mask=0x4) ata1.00: limiting speed to UDMA/133:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1.00: qc timeout (cmd 0xef) ata1.00: failed to set xfermode (err_mask=0x4) ata1.00: disabled scsi1 : ata_piix PM: Adding info for No Bus:host1 ata2.00: ATA-7: Maxtor 6Y200M0, YAR51BW0, max UDMA/133 ata2.00: 398297088 sectors, multi 16: LBA48 /sbin/lspci -vvv 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. P4P800 SE Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-