* How do I try libata with a PATA PCI controller?
@ 2005-01-17 18:51 Greg Freemyer
0 siblings, 0 replies; only message in thread
From: Greg Freemyer @ 2005-01-17 18:51 UTC (permalink / raw)
To: IDE Linux
I have several Adaptec PATA PCI controllers. (They use SIG
chips/firmware/driver).
Is there a way to use/test them with libata?
In general, should I expect better or worse performance for simple
commands like "dd if=/dev/zero of=/dev/hdc bs=50k"
I am building a dedicated disk cleaner and will be running a lot of
dd's in parrellel. ie. I can currently do 8 with all drives set to
Master.
Thanks
Greg
--
Greg Freemyer
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-01-17 18:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-17 18:51 How do I try libata with a PATA PCI controller? Greg Freemyer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).