From: Lieven Marchand <mal@wyrd.be>
To: jgarzik@pobox.com
Cc: linux-ide@vger.kernel.org
Subject: regression problem with Maxtor disk
Date: Sun, 12 Aug 2007 16:14:06 +0200 [thread overview]
Message-ID: <87tzr4zvpt.fsf@wyrd.be> (raw)
Hi,
the following drive
Aug 12 12:26:15 black kernel: Vendor: ATA Model: Maxtor 7H500F0 Rev:
HA43
Aug 12 12:26:15 black kernel: Type: Direct-Access ANSI
SCSI revision: 05
works fine under 2.6.18 and crashes the boot procedure under
2.6.22. Occasionally the boot continues but most of the times the
kernel crashes with an error message of a corrupt cpu context.
I've added the logs of a succesful boot here. When such a boot
succeeds, the system is noticeably slower than under 2.6.18.
Aug 11 10:27:51 black kernel: scsi 4:0:0:0: Direct-Access ATA Maxtor 7H
500F0 HA43 PQ: 0 ANSI: 5
Aug 11 10:27:51 black kernel: ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment bou
ndary 0xFFFFFFFF, hw segs 61
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x440
Aug 11 10:27:51 black kernel: res 51/04:00:00:00:00/04:00:00:00:00/40 E
mask 0x1 (device error)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x440
Aug 11 10:27:51 black kernel: res 51/04:00:00:00:00/04:00:00:00:00/40 E
mask 0x1 (device error)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and ID
LE, stat=0x440
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 E
mask 0x4 (timeout)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 E
mask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and ID
LE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: ata2.00: NCQ disabled due to excessive errors
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 E
mask 0x4 (timeout)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 E
mask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and ID
LE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 E
mask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
next reply other threads:[~2007-08-12 14:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-12 14:14 Lieven Marchand [this message]
2007-08-14 9:50 ` regression problem with Maxtor disk Tejun Heo
2007-08-14 23:14 ` Robert Hancock
2007-08-15 7:34 ` Lieven Marchand
2007-08-15 7:53 ` Tejun Heo
2007-08-15 21:22 ` Lieven Marchand
2007-08-15 23:31 ` Robert Hancock
-- strict thread matches above, loose matches on Subject: below --
2007-08-12 23:36 babl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tzr4zvpt.fsf@wyrd.be \
--to=mal@wyrd.be \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).