From: Lieven Marchand <mal@wyrd.be>
To: Tejun Heo <htejun@gmail.com>
Cc: Robert Hancock <hancockr@shaw.ca>,
jgarzik@pobox.com, linux-ide@vger.kernel.org
Subject: Re: regression problem with Maxtor disk
Date: Wed, 15 Aug 2007 23:22:25 +0200 [thread overview]
Message-ID: <87wsvw8pda.fsf@wyrd.be> (raw)
In-Reply-To: <46C2B0FD.5030101@gmail.com> (Tejun Heo's message of "Wed, 15 Aug 2007 16:53:33 +0900")
Tejun Heo <htejun@gmail.com> writes:
> It seems klogd clipped some messages. Can you please turn on printk
> timestamp, enlarge printk log buffersize and post the result of 'dmesg'
> after errors?
[ 33.587986] libata version 2.21 loaded.
[ 33.592361] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 33.592411] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18
[ 33.592508] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 33.592516] forcedeth: using HIGHDMA
[ 33.633334] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 33.633558] Uniform CD-ROM driver Revision: 3.20
[ 33.638683] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[ 34.109811] eth0: forcedeth.c: subsystem: 01695:1010 bound to 0000:00:0a.0
[ 34.109949] sata_nv 0000:00:07.0: version 3.4
[ 34.110368] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 34.110414] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19
[ 34.110509] sata_nv 0000:00:07.0: Using ADMA mode
[ 34.110587] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 34.110849] scsi0 : sata_nv
[ 34.110922] scsi1 : sata_nv
[ 34.110973] ata1: SATA max UDMA/133 cmd 0xf883e480 ctl 0xf883e4a0 bmdma 0x0001cc00 irq 19
[ 34.111026] ata2: SATA max UDMA/133 cmd 0xf883e580 ctl 0xf883e5a0 bmdma 0x0001cc08 irq 19
[ 34.129549] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 34.322380] usb 2-1: configuration #1 chosen from 1 choice
[ 34.336790] Initializing USB Mass Storage driver...
[ 34.560984] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 34.576963] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.586151] ata1.00: ATA-7: Maxtor 7H500F0, HA431DN0, max UDMA/133
[ 34.586191] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 34.602085] ata1.00: configured for UDMA/133
[ 34.695412] usb 2-2: configuration #1 chosen from 1 choice
[ 34.932499] usb 2-4: new high speed USB device using ehci_hcd and address 4
[ 35.068325] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 35.116969] ata2.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[ 35.117010] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 35.147355] usb 2-4: configuration #1 chosen from 1 choice
[ 35.149712] scsi2 : SCSI emulation for USB Mass Storage devices
[ 35.149993] usb-storage: device found at 2
[ 35.149995] usb-storage: waiting for device to settle before scanning
[ 35.150009] scsi3 : SCSI emulation for USB Mass Storage devices
[ 35.150201] usb-storage: device found at 3
[ 35.150203] usb-storage: waiting for device to settle before scanning
[ 35.150216] scsi4 : SCSI emulation for USB Mass Storage devices
[ 35.150406] usbcore: registered new interface driver usb-storage
[ 35.150447] USB Mass Storage support registered.
[ 35.150491] usb-storage: device found at 4
[ 35.150493] usb-storage: waiting for device to settle before scanning
[ 35.183534] ata2.00: configured for UDMA/133
[ 35.183676] scsi 0:0:0:0: Direct-Access ATA Maxtor 7H500F0 HA43 PQ: 0 ANSI: 5
[ 35.183734] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 35.184076] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[ 35.184130] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 35.184627] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 35.184668] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16
[ 35.184764] sata_nv 0000:00:08.0: Using ADMA mode
[ 35.184843] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 35.184933] scsi5 : sata_nv
[ 35.184996] scsi6 : sata_nv
[ 35.185050] ata3: SATA max UDMA/133 cmd 0xf88a0480 ctl 0xf88a04a0 bmdma 0x0001b800 irq 16
[ 35.185102] ata4: SATA max UDMA/133 cmd 0xf88a0580 ctl 0xf88a05a0 bmdma 0x0001b808 irq 16
[ 35.651571] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 35.660568] ata3.00: ATA-7: Maxtor 6B300S0, BANC1980, max UDMA/133
[ 35.660608] ata3.00: 586114704 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 35.676553] ata3.00: configured for UDMA/133
[ 35.987125] ata4: SATA link down (SStatus 0 SControl 300)
[ 35.987235] scsi 5:0:0:0: Direct-Access ATA Maxtor 6B300S0 BANC PQ: 0 ANSI: 5
[ 35.987289] ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 36.023244] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 36.023297] sd 0:0:0:0: [sda] Write Protect is off
[ 36.023336] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.023347] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 36.023439] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 36.023484] sd 0:0:0:0: [sda] Write Protect is off
[ 36.023522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.023531] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 36.023584] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 36.075908] sd 0:0:0:0: [sda] Attached SCSI disk
[ 36.076642] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 36.078107] sd 1:0:0:0: [sdb] Write Protect is off
[ 36.078145] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 36.078155] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.078230] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 36.078274] sd 1:0:0:0: [sdb] Write Protect is off
[ 36.078312] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 36.078322] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.078374] sdb: sdb1
[ 36.096793] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 36.097148] sd 5:0:0:0: [sdc] 586114704 512-byte hardware sectors (300091 MB)
[ 36.097193] sd 5:0:0:0: [sdc] Write Protect is off
[ 36.097231] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 36.097241] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.097318] sd 5:0:0:0: [sdc] 586114704 512-byte hardware sectors (300091 MB)
[ 36.097363] sd 5:0:0:0: [sdc] Write Protect is off
[ 36.097401] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 36.097410] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.097462] sdc: sdc1 sdc2
[ 36.116596] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 36.488949] Probing IDE interface ide1...
[ 37.067405] md: raid1 personality registered for level 1
[ 37.082723] md: md0 stopped.
[ 37.112993] md: bind<sdc2>
[ 37.113130] md: bind<sda7>
[ 37.123391] raid1: raid set md0 active with 2 out of 2 mirrors
[ 37.302653] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 37.905627] kjournald starting. Commit interval 5 seconds
[ 37.905678] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.355192] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 39.355256] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 40.023669] Real Time Clock Driver v1.12ac
[ 40.047120] input: PC Speaker as /class/input/input1
[ 40.079840] irda_init()
[ 40.079860] NET: Registered protocol family 23
[ 40.108430] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 40.108475] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
[ 40.108588] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 40.141895] usb-storage: device scan complete
[ 40.142136] usb-storage: device scan complete
[ 40.142171] usb-storage: device scan complete
[ 40.144889] scsi 3:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
[ 40.157610] scsi 2:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 40.163346] sd 2:0:0:0: [sdd] 320173056 512-byte hardware sectors (163929 MB)
[ 40.165091] sd 2:0:0:0: [sdd] Write Protect is off
[ 40.165129] sd 2:0:0:0: [sdd] Mode Sense: 08 00 00 00
[ 40.165132] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 40.170335] sd 2:0:0:0: [sdd] 320173056 512-byte hardware sectors (163929 MB)
[ 40.172150] sd 2:0:0:0: [sdd] Write Protect is off
[ 40.172188] sd 2:0:0:0: [sdd] Mode Sense: 08 00 00 00
[ 40.172190] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 40.172230] sdd:<5>scsi 4:0:0:0: Direct-Access ST332082 0A 3.AA PQ: 0 ANSI: 0
[ 40.181832] sdd1
[ 40.181923] sd 2:0:0:0: [sdd] Attached SCSI disk
[ 40.184193] sd 4:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB)
[ 40.187065] sd 4:0:0:0: [sde] Write Protect is off
[ 40.187103] sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
[ 40.187105] sd 4:0:0:0: [sde] Assuming drive cache: write through
[ 40.189186] sd 4:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB)
[ 40.191059] sd 4:0:0:0: [sde] Write Protect is off
[ 40.191097] sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
[ 40.191099] sd 4:0:0:0: [sde] Assuming drive cache: write through
[ 40.191138] sde:<6>intel8x0_measure_ac97_clock: measured 54811 usecs
[ 40.429398] intel8x0: clocking to 46981
[ 40.919334] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 40.922844] parport_pc 00:0a: reported by Plug and Play ACPI
[ 40.922929] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 43.511331] Adding 3036244k swap on /dev/sda5. Priority:-1 extents:1 across:3036244k
[ 43.952498] EXT3 FS on dm-0, internal journal
[ 44.020016] sde1
[ 44.020140] sd 4:0:0:0: [sde] Attached SCSI disk
[ 44.025003] sd 3:0:0:0: [sdf] 312581808 512-byte hardware sectors (160042 MB)
[ 44.028710] sd 3:0:0:0: [sdf] Write Protect is off
[ 44.028756] sd 3:0:0:0: [sdf] Mode Sense: 27 00 00 00
[ 44.028759] sd 3:0:0:0: [sdf] Assuming drive cache: write through
[ 44.032707] sd 3:0:0:0: [sdf] 312581808 512-byte hardware sectors (160042 MB)
[ 44.035706] sd 3:0:0:0: [sdf] Write Protect is off
[ 44.035745] sd 3:0:0:0: [sdf] Mode Sense: 27 00 00 00
[ 44.035748] sd 3:0:0:0: [sdf] Assuming drive cache: write through
[ 44.035788] sdf: sdf1 sdf2 sdf3
[ 44.057279] sd 3:0:0:0: [sdf] Attached SCSI disk
[ 44.417152] f71805f: Found F71872F/FG chip at 0x290, revision 33
[ 48.251624] kjournald starting. Commit interval 5 seconds
[ 48.301077] EXT3 FS on dm-4, internal journal
[ 48.301138] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.315828] kjournald starting. Commit interval 5 seconds
[ 48.324360] EXT3 FS on dm-3, internal journal
[ 48.324419] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.351268] kjournald starting. Commit interval 5 seconds
[ 48.361585] EXT3 FS on dm-1, internal journal
[ 48.361644] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.393085] kjournald starting. Commit interval 5 seconds
[ 48.399449] EXT3 FS on dm-2, internal journal
[ 48.399508] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.422368] kjournald starting. Commit interval 5 seconds
[ 48.432338] EXT3 FS on sda1, internal journal
[ 48.432397] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.454943] kjournald starting. Commit interval 5 seconds
[ 48.455094] EXT3 FS on sdc1, internal journal
[ 48.455152] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.470571] kjournald starting. Commit interval 5 seconds
[ 48.475025] EXT3 FS on sdb1, internal journal
[ 48.475083] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.501723] kjournald starting. Commit interval 5 seconds
[ 48.510507] EXT3 FS on sda6, internal journal
[ 48.510567] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.994556] ata1: timeout waiting for ADMA IDLE, stat=0x440
[ 49.147577] ata1: failed to read log page 10h (errno=-2)
[ 49.149046] ata1.00: exception Emask 0x1 SAct 0xff SErr 0x0 action 0x0
[ 49.149086] ata1.00: (CPB resp_flags 0x11: CMD error)
[ 49.149129] ata1.00: cmd 61/06:00:bc:bf:df/00:00:16:00:00/40 tag 0 cdb 0x0 data 3072 out
[ 49.149131] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149234] ata1.00: cmd 61/04:08:c4:bf:df/00:00:16:00:00/40 tag 1 cdb 0x0 data 2048 out
[ 49.149236] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149338] ata1.00: cmd 61/02:10:d6:bf:df/00:00:16:00:00/40 tag 2 cdb 0x0 data 1024 out
[ 49.149340] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149443] ata1.00: cmd 61/04:18:dc:bf:df/00:00:16:00:00/40 tag 3 cdb 0x0 data 2048 out
[ 49.149445] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149547] ata1.00: cmd 61/02:20:e8:bf:df/00:00:16:00:00/40 tag 4 cdb 0x0 data 1024 out
[ 49.149549] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149652] ata1.00: cmd 61/02:28:f2:bf:df/00:00:16:00:00/40 tag 5 cdb 0x0 data 1024 out
[ 49.149653] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149756] ata1.00: cmd 61/04:30:fa:bf:df/00:00:16:00:00/40 tag 6 cdb 0x0 data 2048 out
[ 49.149758] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149860] ata1.00: cmd 61/02:38:04:c0:df/00:00:16:00:00/40 tag 7 cdb 0x0 data 1024 out
[ 49.149862] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.175045] ata1.00: configured for UDMA/133
[ 49.175095] ata1: EH complete
[ 49.175145] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x440
[ 49.175237] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 49.175285] sd 0:0:0:0: [sda] Write Protect is off
[ 49.175323] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 49.175334] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 79.155040] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x17 next cpb idx 0x0
[ 79.155098] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x2
[ 79.155136] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0
[ 79.155174] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0
[ 79.155212] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0
[ 79.155250] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0
[ 79.155288] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0
[ 79.155326] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0
[ 79.155364] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0
[ 79.155402] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0
[ 79.155440] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0
[ 79.155478] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0
[ 79.155517] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0
[ 79.155555] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0
[ 79.155593] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0
[ 79.155631] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0
[ 79.155669] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0
[ 79.155708] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0
[ 79.155746] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0
[ 79.155784] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0
[ 79.155828] ata1: timeout waiting for ADMA IDLE, stat=0x400
[ 79.155873] ata1: timeout waiting for ADMA LEGACY, stat=0x400
[ 79.155917] ata1.00: exception Emask 0x0 SAct 0x7ffff SErr 0x0 action 0x2 frozen
[ 79.155971] ata1.00: cmd 61/02:00:02:c1:df/00:00:16:00:00/40 tag 0 cdb 0x0 data 1024 out
[ 79.155973] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156075] ata1.00: cmd 61/04:08:fa:bf:df/00:00:16:00:00/40 tag 1 cdb 0x0 data 2048 out
[ 79.156077] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156179] ata1.00: cmd 61/02:10:f2:bf:df/00:00:16:00:00/40 tag 2 cdb 0x0 data 1024 out
[ 79.156180] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156282] ata1.00: cmd 61/02:18:e8:bf:df/00:00:16:00:00/40 tag 3 cdb 0x0 data 1024 out
[ 79.156284] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156386] ata1.00: cmd 61/04:20:dc:bf:df/00:00:16:00:00/40 tag 4 cdb 0x0 data 2048 out
[ 79.156388] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156490] ata1.00: cmd 61/02:28:d6:bf:df/00:00:16:00:00/40 tag 5 cdb 0x0 data 1024 out
[ 79.156492] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156594] ata1.00: cmd 61/04:30:c4:bf:df/00:00:16:00:00/40 tag 6 cdb 0x0 data 2048 out
[ 79.156596] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156698] ata1.00: cmd 61/06:38:bc:bf:df/00:00:16:00:00/40 tag 7 cdb 0x0 data 3072 out
[ 79.156699] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156801] ata1.00: cmd 61/04:40:08:c0:df/00:00:16:00:00/40 tag 8 cdb 0x0 data 2048 out
[ 79.156803] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.156905] ata1.00: cmd 61/04:48:ca:c0:df/00:00:16:00:00/40 tag 9 cdb 0x0 data 2048 out
[ 79.156907] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157009] ata1.00: cmd 61/06:50:d0:c0:df/00:00:16:00:00/40 tag 10 cdb 0x0 data 3072 out
[ 79.157011] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157113] ata1.00: cmd 61/02:58:d8:c0:df/00:00:16:00:00/40 tag 11 cdb 0x0 data 1024 out
[ 79.157114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157216] ata1.00: cmd 61/02:60:e0:c0:df/00:00:16:00:00/40 tag 12 cdb 0x0 data 1024 out
[ 79.157218] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157320] ata1.00: cmd 61/02:68:f0:c0:df/00:00:16:00:00/40 tag 13 cdb 0x0 data 1024 out
[ 79.157322] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157424] ata1.00: cmd 61/02:70:f8:c0:df/00:00:16:00:00/40 tag 14 cdb 0x0 data 1024 out
[ 79.157426] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157528] ata1.00: cmd 61/04:78:fc:c0:df/00:00:16:00:00/40 tag 15 cdb 0x0 data 2048 out
[ 79.157529] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157631] ata1.00: cmd 61/02:80:06:c1:df/00:00:16:00:00/40 tag 16 cdb 0x0 data 1024 out
[ 79.157633] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157735] ata1.00: cmd 61/06:88:0a:c1:df/00:00:16:00:00/40 tag 17 cdb 0x0 data 3072 out
[ 79.157737] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157839] ata1.00: cmd 61/04:90:18:c1:df/00:00:16:00:00/40 tag 18 cdb 0x0 data 2048 out
[ 79.157841] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.466629] ata1: soft resetting port
[ 79.622437] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 79.647445] ata1.00: configured for UDMA/133
[ 79.647494] ata1: EH complete
[ 79.647538] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400
[ 79.647602] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 79.647648] sd 0:0:0:0: [sda] Write Protect is off
[ 79.647686] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 79.647697] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 109.607481] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x12 next cpb idx 0x0
[ 109.607538] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x2
[ 109.607576] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0
[ 109.607614] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0
[ 109.607652] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0
[ 109.607690] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0
[ 109.607728] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0
[ 109.607766] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0
[ 109.607804] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0
[ 109.607842] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0
[ 109.607880] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0
[ 109.607919] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0
[ 109.607957] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0
[ 109.607995] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0
[ 109.608033] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0
[ 109.608071] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0
[ 109.608110] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0
[ 109.608148] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0
[ 109.608186] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0
[ 109.608224] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0
[ 109.608268] ata1: timeout waiting for ADMA IDLE, stat=0x400
[ 109.608313] ata1: timeout waiting for ADMA LEGACY, stat=0x400
[ 109.608356] ata1.00: exception Emask 0x0 SAct 0x7ffff SErr 0x0 action 0x2 frozen
[ 109.608410] ata1.00: cmd 61/04:00:18:c1:df/00:00:16:00:00/40 tag 0 cdb 0x0 data 2048 out
[ 109.608412] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.609937] ata1.00: cmd 61/06:08:0a:c1:df/00:00:16:00:00/40 tag 1 cdb 0x0 data 3072 out
[ 109.609938] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610041] ata1.00: cmd 61/02:10:06:c1:df/00:00:16:00:00/40 tag 2 cdb 0x0 data 1024 out
[ 109.610042] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610145] ata1.00: cmd 61/04:18:fc:c0:df/00:00:16:00:00/40 tag 3 cdb 0x0 data 2048 out
[ 109.610146] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610249] ata1.00: cmd 61/02:20:f8:c0:df/00:00:16:00:00/40 tag 4 cdb 0x0 data 1024 out
[ 109.610250] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610353] ata1.00: cmd 61/02:28:f0:c0:df/00:00:16:00:00/40 tag 5 cdb 0x0 data 1024 out
[ 109.610354] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610456] ata1.00: cmd 61/02:30:e0:c0:df/00:00:16:00:00/40 tag 6 cdb 0x0 data 1024 out
[ 109.610458] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610560] ata1.00: cmd 61/02:38:d8:c0:df/00:00:16:00:00/40 tag 7 cdb 0x0 data 1024 out
[ 109.610562] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610664] ata1.00: cmd 61/06:40:d0:c0:df/00:00:16:00:00/40 tag 8 cdb 0x0 data 3072 out
[ 109.610666] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.610768] ata1.00: cmd 61/04:48:ca:c0:df/00:00:16:00:00/40 tag 9 cdb 0x0 data 2048 out
[ 109.610769] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.610871] ata1.00: cmd 61/04:50:08:c0:df/00:00:16:00:00/40 tag 10 cdb 0x0 data 2048 out
[ 109.610873] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.610975] ata1.00: cmd 61/06:58:bc:bf:df/00:00:16:00:00/40 tag 11 cdb 0x0 data 3072 out
[ 109.610977] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611079] ata1.00: cmd 61/04:60:c4:bf:df/00:00:16:00:00/40 tag 12 cdb 0x0 data 2048 out
[ 109.611081] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611183] ata1.00: cmd 61/02:68:d6:bf:df/00:00:16:00:00/40 tag 13 cdb 0x0 data 1024 out
[ 109.611185] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611287] ata1.00: cmd 61/04:70:dc:bf:df/00:00:16:00:00/40 tag 14 cdb 0x0 data 2048 out
[ 109.611288] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611391] ata1.00: cmd 61/02:78:e8:bf:df/00:00:16:00:00/40 tag 15 cdb 0x0 data 1024 out
[ 109.611392] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611497] ata1.00: cmd 61/02:80:f2:bf:df/00:00:16:00:00/40 tag 16 cdb 0x0 data 1024 out
[ 109.611498] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611601] ata1.00: cmd 61/04:88:fa:bf:df/00:00:16:00:00/40 tag 17 cdb 0x0 data 2048 out
[ 109.611602] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611704] ata1.00: cmd 61/02:90:02:c1:df/00:00:16:00:00/40 tag 18 cdb 0x0 data 1024 out
[ 109.611706] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.923055] ata1: soft resetting port
[ 110.078863] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 110.104389] ata1.00: configured for UDMA/133
[ 110.104437] ata1: EH complete
[ 110.104480] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400
[ 110.104543] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 110.104588] sd 0:0:0:0: [sda] Write Protect is off
[ 110.104625] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 110.104636] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 140.063908] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x12 next cpb idx 0x0
[ 140.063965] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x2
[ 140.064003] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0
[ 140.064041] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0
[ 140.064079] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0
[ 140.064117] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0
[ 140.064156] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0
[ 140.064194] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0
[ 140.064232] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0
[ 140.064270] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0
[ 140.064308] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0
[ 140.064346] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0
[ 140.064384] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0
[ 140.064422] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0
[ 140.064460] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0
[ 140.064498] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0
[ 140.064537] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0
[ 140.064575] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0
[ 140.064613] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0
[ 140.064651] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0
[ 140.064695] ata1: timeout waiting for ADMA IDLE, stat=0x400
[ 140.064740] ata1: timeout waiting for ADMA LEGACY, stat=0x400
[ 140.064782] ata1.00: NCQ disabled due to excessive errors
[ 140.064821] ata1.00: exception Emask 0x0 SAct 0x7ffff SErr 0x0 action 0x2 frozen
[ 140.064875] ata1.00: cmd 61/02:00:02:c1:df/00:00:16:00:00/40 tag 0 cdb 0x0 data 1024 out
[ 140.064877] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.064979] ata1.00: cmd 61/04:08:fa:bf:df/00:00:16:00:00/40 tag 1 cdb 0x0 data 2048 out
[ 140.064981] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065083] ata1.00: cmd 61/02:10:f2:bf:df/00:00:16:00:00/40 tag 2 cdb 0x0 data 1024 out
[ 140.065085] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065187] ata1.00: cmd 61/02:18:e8:bf:df/00:00:16:00:00/40 tag 3 cdb 0x0 data 1024 out
[ 140.065188] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065290] ata1.00: cmd 61/04:20:dc:bf:df/00:00:16:00:00/40 tag 4 cdb 0x0 data 2048 out
[ 140.065292] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065394] ata1.00: cmd 61/02:28:d6:bf:df/00:00:16:00:00/40 tag 5 cdb 0x0 data 1024 out
[ 140.065396] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065498] ata1.00: cmd 61/04:30:c4:bf:df/00:00:16:00:00/40 tag 6 cdb 0x0 data 2048 out
[ 140.065500] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065602] ata1.00: cmd 61/06:38:bc:bf:df/00:00:16:00:00/40 tag 7 cdb 0x0 data 3072 out
[ 140.065603] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065705] ata1.00: cmd 61/04:40:08:c0:df/00:00:16:00:00/40 tag 8 cdb 0x0 data 2048 out
[ 140.065707] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.065809] ata1.00: cmd 61/04:48:ca:c0:df/00:00:16:00:00/40 tag 9 cdb 0x0 data 2048 out
[ 140.065810] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.065912] ata1.00: cmd 61/06:50:d0:c0:df/00:00:16:00:00/40 tag 10 cdb 0x0 data 3072 out
[ 140.065914] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066016] ata1.00: cmd 61/02:58:d8:c0:df/00:00:16:00:00/40 tag 11 cdb 0x0 data 1024 out
[ 140.066018] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066120] ata1.00: cmd 61/02:60:e0:c0:df/00:00:16:00:00/40 tag 12 cdb 0x0 data 1024 out
[ 140.066121] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066224] ata1.00: cmd 61/02:68:f0:c0:df/00:00:16:00:00/40 tag 13 cdb 0x0 data 1024 out
[ 140.066225] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066327] ata1.00: cmd 61/02:70:f8:c0:df/00:00:16:00:00/40 tag 14 cdb 0x0 data 1024 out
[ 140.066329] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066431] ata1.00: cmd 61/04:78:fc:c0:df/00:00:16:00:00/40 tag 15 cdb 0x0 data 2048 out
[ 140.066433] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066535] ata1.00: cmd 61/02:80:06:c1:df/00:00:16:00:00/40 tag 16 cdb 0x0 data 1024 out
[ 140.066537] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066639] ata1.00: cmd 61/06:88:0a:c1:df/00:00:16:00:00/40 tag 17 cdb 0x0 data 3072 out
[ 140.066641] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066743] ata1.00: cmd 61/04:90:18:c1:df/00:00:16:00:00/40 tag 18 cdb 0x0 data 2048 out
[ 140.066744] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.379482] ata1: soft resetting port
[ 140.535289] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 140.560308] ata1.00: configured for UDMA/133
[ 140.560356] ata1: EH complete
[ 140.560400] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400
[ 170.520332] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 next cpb idx 0x0
[ 170.520389] ata1: CPB 0: ctl_flags 0xd, resp_flags 0x0
[ 170.520433] ata1: timeout waiting for ADMA IDLE, stat=0x400
[ 170.520477] ata1: timeout waiting for ADMA LEGACY, stat=0x400
[ 170.520521] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 170.520565] ata1.00: cmd 35/00:04:18:c1:df/00:00:16:00:00/e0 tag 0 cdb 0x0 data 2048 out
[ 170.520567] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 170.831913] ata1: soft resetting port
[ 170.987721] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 171.012723] ata1.00: configured for UDMA/133
[ 171.012762] ata1: EH complete
[ 171.162056] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 171.166591] sd 0:0:0:0: [sda] Write Protect is off
[ 171.166629] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 171.178390] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 171.195572] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 171.204351] sd 0:0:0:0: [sda] Write Protect is off
[ 171.204389] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 171.214556] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
next prev parent reply other threads:[~2007-08-15 21:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-12 14:14 regression problem with Maxtor disk Lieven Marchand
2007-08-14 9:50 ` Tejun Heo
2007-08-14 23:14 ` Robert Hancock
2007-08-15 7:34 ` Lieven Marchand
2007-08-15 7:53 ` Tejun Heo
2007-08-15 21:22 ` Lieven Marchand [this message]
2007-08-15 23:31 ` Robert Hancock
-- strict thread matches above, loose matches on Subject: below --
2007-08-12 23:36 babl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wsvw8pda.fsf@wyrd.be \
--to=mal@wyrd.be \
--cc=hancockr@shaw.ca \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).