Re: [PATCH] Re: Linux v2.6.22-rc3

["Gregor Jasny" <gjasny@googlemail.com>]

2007/6/2, Jeff Garzik <jeff@garzik.org>:
> Does this patch change the behavior at all?

No. It still times out. I've raised the first timeout to 60 seconds
but still no luck.

[   19.403632] ata_piix 0000:00:07.1: version 2.11
[   19.404013] scsi0 : ata_piix
[   19.404482] scsi1 : ata_piix
[   19.404836] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x00010860 irq 14
[   19.405443] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376
bmdma 0x00010868 irq 15
[    0.663333] Marking TSC unstable due to: possible TSC halt in C2.
[    0.666666] Time: acpi_pm clocksource has been installed.
[    0.666666] Switched to NOHz mode on CPU #0
[    0.716666] ata1.00: ata_hpa_resize 1: sectors = 78242976,
hpa_sectors = 78242976
[    0.716666] ata1.00: ATA-7: SAMSUNG MP0402H, UC100-14, max UDMA/100
[    0.733333] ata1.00: 78242976 sectors, multi 8: LBA48
[    0.753333] ata1.00: ata_hpa_resize 1: sectors = 78242976,
hpa_sectors = 78242976
[    0.766666] ata1.00: configured for UDMA/33
[    1.379999] Clocksource tsc unstable (delta = -498119555 ns)
[   10.793332] ata2: SRST failed (errno=-16)
[   20.813331] ata2: SRST failed (errno=-16)
[   55.833327] ata2: SRST failed (errno=-16)
[   60.853327] ata2: SRST failed (errno=-16)
[   60.866660] ata2: reset failed, giving up
[   60.879993] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG
MP0402H  UC10 PQ: 0 ANSI: 5

Cheers,
Gregor