From mboxrd@z Thu Jan 1 00:00:00 1970 From: kenneth topp Subject: via sata issues Date: Tue, 20 Dec 2005 10:41:42 -0500 (EST) Message-ID: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Return-path: Received: from pop-satin.atl.sa.earthlink.net ([207.69.195.63]:8159 "EHLO pop-satin.atl.sa.earthlink.net") by vger.kernel.org with ESMTP id S1751099AbVLTPlp (ORCPT ); Tue, 20 Dec 2005 10:41:45 -0500 Received: from user-12ldo29.cable.mindspring.com ([69.86.224.73] helo=bllue.dyndns.org) by pop-satin.atl.sa.earthlink.net with esmtp (Exim 3.36 #10) id 1EojcV-0004zM-00 for linux-ide@vger.kernel.org; Tue, 20 Dec 2005 10:41:44 -0500 Received: from localhost (localhost [127.0.0.1]) by bllue.dyndns.org (Postfix) with ESMTP id 6E7818A784 for ; Tue, 20 Dec 2005 10:41:42 -0500 (EST) Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org 1) why use ataN instead of sdX in messages, it just makes it more difficult to track, especially since there are holes, and you cannot see the mapping in sysfs... 2) I've got tons of these messages, and I had some drive failures, but I cannot imagine theyt are all drive failures. the system still hangs mostly on ata1/2 command time outs, which is why I'm going to move those disks from onboard via to another tx4. Any advice? I'm getting system hangs even for disks on the promise (I have to swear off the WDC HDD). Running: kernel-smp-2.6.14-1.1775_FC5 which is 2.6.15-rc6. The newer kernel from davej panics on the via (getting a seial cable for the dump). this is a sort | uniq of messages: kernel: ata3: status=0x50 { DriveReady SeekComplete } kernel: ata4: status=0x50 { DriveReady SeekComplete } kernel: ata4: status=0x52 { DriveReady SeekComplete Index } kernel: ata5: status=0x50 { DriveReady SeekComplete } kernel: ata6: status=0x50 { DriveReady SeekComplete } kernel: ata1: command 0x25 timeout, stat 0x50 host_stat 0x4 kernel: ata1: command 0x35 timeout, stat 0x50 host_stat 0x4 kernel: ata1: command 0xea timeout, stat 0x50 host_stat 0x0 kernel: ata2: command 0x35 timeout, stat 0x50 host_stat 0x4 kernel: ata3: command timeout kernel: ata4: command timeout kernel: ata5: command timeout kernel: ata6: command timeout -- boot up messages -- SCSI subsystem initialized libata version 1.20 loaded. sata_via 0000:00:0f.0: version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9 sata_via 0000:00:0f.0: routed to hard irq line 9 ata1: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma 0xC800 irq 169 ata2: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xC808 irq 169 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via ata2: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:407f ata2: dev 0 ATA-6, max UDMA/133, 488397168 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_via Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: WDC WD2500JD-00H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb sata_promise 0000:00:07.0: version 1.03 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 177 ata3: SATA max UDMA/133 cmd 0xF8862200 ctl 0xF8862238 bmdma 0x0 irq 177 ata4: SATA max UDMA/133 cmd 0xF8862280 ctl 0xF88622B8 bmdma 0x0 irq 177 ata5: SATA max UDMA/133 cmd 0xF8862300 ctl 0xF8862338 bmdma 0x0 irq 177 ata6: SATA max UDMA/133 cmd 0xF8862380 ctl 0xF88623B8 bmdma 0x0 irq 177 ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f ata3: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48 ata3: dev 0 configured for UDMA/133 scsi2 : sata_promise ata4: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023 88:203f ata4: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 ata4: dev 0 configured for UDMA/100 scsi3 : sata_promise ata5: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f ata5: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48 ata5: dev 0 configured for UDMA/133 scsi4 : sata_promise ata6: no device found (phy stat 00000000) scsi5 : sata_promise Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sd 2:0:0:0: Attached scsi disk sdc Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back sdd: sdd1 sd 3:0:0:0: Attached scsi disk sdd Vendor: ATA Model: WDC WD4000KD-00N Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sde: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sde: drive cache: write back SCSI device sde: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sde: drive cache: write back sde: sde1 sd 4:0:0:0: Attached scsi disk sde