From mboxrd@z Thu Jan 1 00:00:00 1970 From: "xerces8" Subject: Re: GA-MA790FX-DS5 SATA ahci NCQ erros on Jmicron 20360/20363 (JMB363) kernel 2.6.25-2 Debian/Lenny Date: Sun, 24 Aug 2008 18:44:24 +0200 Message-ID: References: <48B0916C.4080805@garzik.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Return-path: Received: from ikar.perftech.si ([195.246.0.20]:6733 "EHLO ikar.perftech.si" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751752AbYHXQod (ORCPT ); Sun, 24 Aug 2008 12:44:33 -0400 In-Reply-To: Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Sergey Spiridonov , linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Sergey Spiridonov wrote: > Jeff Garzik wrote: > > > So... suspect bad cables, bad port connectors, cable interference, > > motherboard-caused interference or grounding problems, power supply > > problems. > > I did exchange power supply and I did exchange hard drives. The same > hard drive with the same cable works with SB600 and produces errors with > JMB363. So looks like it is not cable or hard drive problem. May be the > problem is JMB363 port connector on the motherboard. How can I check it? Hi! I have a JMB363 myself and it has its share of problems. I would say it is buggy hardware. (why would they otherwise release a new windows driver every week ? if not to workaround bugs in HW ;-) My WD MyBook Studio Edition 500 GB external eSATA drive does not work on the JMB363 correctly no matter what I try. Both under linux and windows. I think the best was 30 minutes of (apparent) error free operation under windows. If interested, I can supply logs, data etc. (I have a bunch of drives to try). Regards, David