From: "xerces8" <xerces8@butn.net>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org, Jeff Garzik <jgarzik@pobox.com>,
stein@hermes.si
Subject: Re: Intel AHCI ICH9R not detecting devices
Date: Sat, 30 Aug 2008 21:42:27 +0200 [thread overview]
Message-ID: <WorldClient-F200808302142.AA42270030@butn.net> (raw)
In-Reply-To: <48B92399.6010808@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 1661 bytes --]
Tejun Heo wrote:
> xerces8 wrote:
> > I noticed that recent kernels do not detect my SATA devices (two
> > SATA hard drives and one DVD unit).
> >
> > HW: Asus P5K-E WiFi mainboard, BIOS version 1013 (latest as of now)
> > BIOS setup: SATA adapter mode : AHCI
> > CPU: Intel Core2 Q6600 (not overclocked)
> > RAM: 4x2GB DDR2-800
> >
> > Kernel: 2.6.26.3 (vanilla unpatched)
> > arch: i386
> >
> > kernel config : http://pastebin.com/f7640ead2
> > dmesg output : http://pastebin.com/f3b3fac14
> > lspci: http://pastebin.com/f2a3edebf
> > lspci -v -n : http://pastebin.com/f724cf3
> > /proc/cpuinfo: http://pastebin.com/f11930c44
>
> It's usually best to include relevant excerpts inline and then attach
> the whole stuff as attachments. Posting links to some URL or non-OSDL
> bugzilla entries is likely to significantly increase your chance of
> just being skipped over. You know, we're cranky nerds who hate the
> web and stick to 80-column terminals. ;-)
>
> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ACPI: PCI interrupt for device 0000:00:1f.2 disabled
> ahci: probe of 0000:00:1f.2 failed with error -16
>
> This looks like resource conflict to me, which could have resulted
> from ahci trying to grab all resources. Can you please post the
> result of "cat /proc/ioports" and "cat /proc/iomem"?
I noticed that in IDE mode the same happens (32bit kernel has problems,
64bit kernel has not), so here is dmesg, iomem and ioports for all 4
combinations.
Regards,
David
[-- Attachment #2: 32-ahci-dmesg --]
[-- Type: application/octet-stream, Size: 15430 bytes --]
d
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.9)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with security attributes, realtime, large block numbers, no debug enabled
msgmni has been set to 1708
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered (default)
pci 0000:01:00.0: Boot video device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CFF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: ACPI0007:00 is registered as cooling_device0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 10 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
cs89x0:cs89x0_probe(0x0)
PP_addr at 300[a]: 0xffff
eth1: incorrect signature at 300[c]: 0xffff!=0x630E
PP_addr at 320[a]: 0xffff
eth1: incorrect signature at 320[c]: 0xffff!=0x630E
PP_addr at 340[a]: 0xffff
eth1: incorrect signature at 340[c]: 0xffff!=0x630E
PP_addr at 360[a]: 0xffff
eth1: incorrect signature at 360[c]: 0xffff!=0x630E
PP_addr at 200[a]: 0xffff
eth1: incorrect signature at 200[c]: 0xffff!=0x630E
PP_addr at 220[a]: 0xffff
eth1: incorrect signature at 220[c]: 0xffff!=0x630E
PP_addr at 240[a]: 0xffff
eth1: incorrect signature at 240[c]: 0xffff!=0x630E
PP_addr at 260[a]: 0xffff
eth1: incorrect signature at 260[c]: 0xffff!=0x630E
PP_addr at 280[a]: 0xffff
eth1: incorrect signature at 280[c]: 0xffff!=0x630E
PP_addr at 2a0[a]: 0xffff
eth1: incorrect signature at 2a0[c]: 0xffff!=0x630E
PP_addr at 2c0[a]: 0xffff
eth1: incorrect signature at 2c0[c]: 0xffff!=0x630E
PP_addr at 2e0[a]: 0xffff
eth1: incorrect signature at 2e0[c]: 0xffff!=0x630E
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
eth%d: i82596 initialization timed out
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ahci: probe of 0000:00:1f.2 failed with error -16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 11
ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 11
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata3: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 10
ata4: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 10
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 14
PCI: setting IRQ 14 as level-triggered
ACPI: PCI Interrupt 0000:05:03.0[A] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
ohci1394: Failed to allocate interrupt 14
ohci1394: probe of 0000:05:03.0 failed with error -12
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: Cannot register CSR space
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 5, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 7, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 11, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 5, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: request interrupt 14 failed
uhci_hcd 0000:00:1d.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -16
uhci_hcd: probe of 0000:00:1d.1 failed with error -16
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000b480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
sl811: driver sl811-hcd, 19 May 2005
usb 2-2: configuration #1 chosen from 1 choice
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 960 MB/s
raid6: int32x2 904 MB/s
raid6: int32x4 781 MB/s
raid6: int32x8 701 MB/s
raid6: mmxx1 3101 MB/s
raid6: mmxx2 3523 MB/s
raid6: sse1x1 2108 MB/s
raid6: sse1x2 2721 MB/s
raid6: sse2x1 3769 MB/s
raid6: sse2x2 4312 MB/s
raid6: using algorithm sse2x2 (4312 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
padlock: VIA PadLock not detected.
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 300k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
hda-intel: unable to grab IRQ 15, disabling device
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
HDA Intel: probe of 0000:00:1b.0 failed with error -16
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:3e:d3:5b, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
scsi 6:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
[-- Attachment #3: 32-ahci-iomem --]
[-- Type: application/octet-stream, Size: 1573 bytes --]
00000000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccdff : Video ROM
000f0000-000fffff : System ROM
00100000-cff7ffff : System RAM
00100000-006607b2 : Kernel code
006607b3-008ea7e7 : Kernel data
00939000-00988647 : Kernel bss
cff80000-cff8dfff : ACPI Tables
cff8e000-cffdffff : ACPI Non-volatile Storage
cffe0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : pnp 00:0c
f8f00000-f8ffffff : PCI Bus 0000:04
f9ff8000-f9ffbfff : 0000:00:1b.0
f9ffe800-f9ffefff : 0000:00:1f.2
f9fff400-f9fff4ff : 0000:00:1f.3
f9fff800-f9fffbff : 0000:00:1d.7
f9fff800-f9fffbff : ehci_hcd
f9fffc00-f9ffffff : 0000:00:1a.7
f9fffc00-f9ffffff : ehci_hcd
fa000000-fe8fffff : PCI Bus 0000:01
fa000000-fbffffff : 0000:01:00.0
fd000000-fdffffff : 0000:01:00.0
fe8e0000-fe8fffff : 0000:01:00.0
fe900000-fe9fffff : PCI Bus 0000:02
fe9c0000-fe9dffff : 0000:02:00.0
fe9fc000-fe9fffff : 0000:02:00.0
fe9fc000-fe9fffff : sky2
fea00000-feafffff : PCI Bus 0000:03
feae0000-feaeffff : 0000:03:00.0
feafe000-feafffff : 0000:03:00.0
feafe000-feafffff : ahci
feb00000-febfffff : PCI Bus 0000:05
febff000-febfffff : 0000:05:03.0
fec00000-fec00fff : pnp 00:0a
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:07
fed20000-fed3ffff : pnp 00:07
fed50000-fed8ffff : pnp 00:07
fee00000-fee00fff : reserved
ffa00000-ffafffff : pnp 00:07
ffb00000-ffbfffff : pnp 00:07
ffe00000-ffffffff : reserved
[-- Attachment #4: 32-ahci-ioports --]
[-- Type: application/octet-stream, Size: 1579 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0110-0110 : 3c509-control
0170-0177 : ide_generic
01f0-01f7 : ide_generic
0290-0297 : pnp 00:06
0320-0323 : wd7000
0350-0353 : wd7000
0376-0376 : ide_generic
03c0-03df : vga+
03f6-03f6 : ide_generic
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0480-04bf : 0000:00:1f.0
0480-04bf : pnp 00:07
04d0-04d1 : pnp 00:07
0800-087f : 0000:00:1f.0
0800-087f : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
a400-a41f : 0000:00:1f.2
a480-a483 : 0000:00:1f.2
a800-a807 : 0000:00:1f.2
a880-a883 : 0000:00:1f.2
ac00-ac07 : 0000:00:1f.2
b080-b09f : 0000:00:1d.0
b080-b09f : uhci_hcd
b400-b41f : 0000:00:1d.1
b480-b49f : 0000:00:1d.2
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1a.0
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1a.1
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1a.2
bc00-bc1f : uhci_hcd
c000-cfff : PCI Bus 0000:01
cc00-cc7f : 0000:01:00.0
d000-dfff : PCI Bus 0000:02
d800-d8ff : 0000:02:00.0
d800-d8ff : sky2
e000-efff : PCI Bus 0000:03
e400-e40f : 0000:03:00.1
e400-e40f : pata_jmicron
e480-e483 : 0000:03:00.1
e480-e483 : pata_jmicron
e800-e807 : 0000:03:00.1
e800-e807 : pata_jmicron
e880-e883 : 0000:03:00.1
e880-e883 : pata_jmicron
ec00-ec07 : 0000:03:00.1
ec00-ec07 : pata_jmicron
[-- Attachment #5: 32-IDE-dmesg --]
[-- Type: application/octet-stream, Size: 15445 bytes --]
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 10 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
cs89x0:cs89x0_probe(0x0)
PP_addr at 300[a]: 0xffff
eth1: incorrect signature at 300[c]: 0xffff!=0x630E
PP_addr at 320[a]: 0xffff
eth1: incorrect signature at 320[c]: 0xffff!=0x630E
PP_addr at 340[a]: 0xffff
eth1: incorrect signature at 340[c]: 0xffff!=0x630E
PP_addr at 360[a]: 0xffff
eth1: incorrect signature at 360[c]: 0xffff!=0x630E
PP_addr at 200[a]: 0xffff
eth1: incorrect signature at 200[c]: 0xffff!=0x630E
PP_addr at 220[a]: 0xffff
eth1: incorrect signature at 220[c]: 0xffff!=0x630E
PP_addr at 240[a]: 0xffff
eth1: incorrect signature at 240[c]: 0xffff!=0x630E
PP_addr at 260[a]: 0xffff
eth1: incorrect signature at 260[c]: 0xffff!=0x630E
PP_addr at 280[a]: 0xffff
eth1: incorrect signature at 280[c]: 0xffff!=0x630E
PP_addr at 2a0[a]: 0xffff
eth1: incorrect signature at 2a0[c]: 0xffff!=0x630E
PP_addr at 2c0[a]: 0xffff
eth1: incorrect signature at 2c0[c]: 0xffff!=0x630E
PP_addr at 2e0[a]: 0xffff
eth1: incorrect signature at 2e0[c]: 0xffff!=0x630E
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
eth%d: i82596 initialization timed out
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:03:00.0: version 3.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 11
ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 11
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ata_piix: probe of 0000:00:1f.2 failed with error -16
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ata_piix: probe of 0000:00:1f.5 failed with error -16
ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata3: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 10
ata4: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 10
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 14
PCI: setting IRQ 14 as level-triggered
ACPI: PCI Interrupt 0000:05:03.0[A] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
ohci1394: Failed to allocate interrupt 14
ohci1394: probe of 0000:05:03.0 failed with error -12
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: Cannot register CSR space
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 5, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 7, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 11, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 5, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: request interrupt 14 failed
uhci_hcd 0000:00:1d.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -16
uhci_hcd: probe of 0000:00:1d.1 failed with error -16
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000b480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
sl811: driver sl811-hcd, 19 May 2005
usb 2-2: configuration #1 chosen from 1 choice
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 960 MB/s
raid6: int32x2 904 MB/s
raid6: int32x4 781 MB/s
raid6: int32x8 702 MB/s
raid6: mmxx1 3101 MB/s
raid6: mmxx2 3524 MB/s
raid6: sse1x1 2108 MB/s
raid6: sse1x2 2721 MB/s
raid6: sse2x1 3768 MB/s
raid6: sse2x2 4312 MB/s
raid6: using algorithm sse2x2 (4312 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
padlock: VIA PadLock not detected.
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 300k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
hda-intel: unable to grab IRQ 15, disabling device
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
HDA Intel: probe of 0000:00:1b.0 failed with error -16
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:3e:d3:5b, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
scsi 6:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
mtrr: type mismatch for fbc00000,200000 old: write-back new: write-combining
mtrr: type mismatch for fb800000,400000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,800000 old: write-back new: write-combining
[-- Attachment #6: 32-IDE-iomem --]
[-- Type: application/octet-stream, Size: 1540 bytes --]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccdff : Video ROM
000f0000-000fffff : System ROM
00100000-cff7ffff : System RAM
00100000-006607b2 : Kernel code
006607b3-008ea7e7 : Kernel data
00939000-00988647 : Kernel bss
cff80000-cff8dfff : ACPI Tables
cff8e000-cffdffff : ACPI Non-volatile Storage
cffe0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : pnp 00:0c
f8f00000-f8ffffff : PCI Bus 0000:04
f9ff8000-f9ffbfff : 0000:00:1b.0
f9fff400-f9fff4ff : 0000:00:1f.3
f9fff800-f9fffbff : 0000:00:1d.7
f9fff800-f9fffbff : ehci_hcd
f9fffc00-f9ffffff : 0000:00:1a.7
f9fffc00-f9ffffff : ehci_hcd
fa000000-fe8fffff : PCI Bus 0000:01
fa000000-fbffffff : 0000:01:00.0
fd000000-fdffffff : 0000:01:00.0
fe8e0000-fe8fffff : 0000:01:00.0
fe900000-fe9fffff : PCI Bus 0000:02
fe9c0000-fe9dffff : 0000:02:00.0
fe9fc000-fe9fffff : 0000:02:00.0
fe9fc000-fe9fffff : sky2
fea00000-feafffff : PCI Bus 0000:03
feae0000-feaeffff : 0000:03:00.0
feafe000-feafffff : 0000:03:00.0
feafe000-feafffff : ahci
feb00000-febfffff : PCI Bus 0000:05
febff000-febfffff : 0000:05:03.0
fec00000-fec00fff : pnp 00:0a
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:07
fed20000-fed3ffff : pnp 00:07
fed50000-fed8ffff : pnp 00:07
fee00000-fee00fff : reserved
ffa00000-ffafffff : pnp 00:07
ffb00000-ffbfffff : pnp 00:07
ffe00000-ffffffff : reserved
[-- Attachment #7: 32-IDE-ioports --]
[-- Type: application/octet-stream, Size: 1754 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0110-0110 : 3c509-control
0170-0177 : ide_generic
01f0-01f7 : ide_generic
0290-0297 : pnp 00:06
0320-0323 : wd7000
0350-0353 : wd7000
0376-0376 : ide_generic
03c0-03df : vga+
03f6-03f6 : ide_generic
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0480-04bf : 0000:00:1f.0
0480-04bf : pnp 00:07
04d0-04d1 : pnp 00:07
0800-087f : 0000:00:1f.0
0800-087f : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
9400-940f : 0000:00:1f.2
9480-948f : 0000:00:1f.2
9800-9803 : 0000:00:1f.2
9880-9887 : 0000:00:1f.2
9c00-9c03 : 0000:00:1f.2
a000-a007 : 0000:00:1f.2
a400-a40f : 0000:00:1f.5
a480-a48f : 0000:00:1f.5
a800-a803 : 0000:00:1f.5
a880-a887 : 0000:00:1f.5
ac00-ac03 : 0000:00:1f.5
b000-b007 : 0000:00:1f.5
b080-b09f : 0000:00:1d.0
b080-b09f : uhci_hcd
b400-b41f : 0000:00:1d.1
b480-b49f : 0000:00:1d.2
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1a.0
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1a.1
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1a.2
bc00-bc1f : uhci_hcd
c000-cfff : PCI Bus 0000:01
cc00-cc7f : 0000:01:00.0
d000-dfff : PCI Bus 0000:02
d800-d8ff : 0000:02:00.0
d800-d8ff : sky2
e000-efff : PCI Bus 0000:03
e400-e40f : 0000:03:00.1
e400-e40f : pata_jmicron
e480-e483 : 0000:03:00.1
e480-e483 : pata_jmicron
e800-e807 : 0000:03:00.1
e800-e807 : pata_jmicron
e880-e883 : 0000:03:00.1
e880-e883 : pata_jmicron
ec00-ec07 : 0000:03:00.1
ec00-ec07 : pata_jmicron
[-- Attachment #8: 64-ahci-dmesg --]
[-- Type: application/octet-stream, Size: 15445 bytes --]
h tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Overmounted tmpfs
Freeing initrd memory: 75080k freed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.9)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
msgmni has been set to 15961
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered (default)
pci 0000:01:00.0: Boot video device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CFF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: ACPI0007:00 is registered as cooling_device0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 22
ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 22
ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 22
ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 22
ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 22
ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 22
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB01, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: SAMSUNG HD642JJ, 1AA01110, max UDMA7
ata5.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 4:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
ata10: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usb 2-2: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00000081db]
usb 8-1: new low speed USB device using uhci_hcd and address 2
usb 8-1: configuration #1 chosen from 1 choice
usb 8-2: new low speed USB device using uhci_hcd and address 3
usb 8-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi10 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1 2262 MB/s
raid6: int64x2 2852 MB/s
raid6: int64x4 2724 MB/s
raid6: int64x8 2204 MB/s
raid6: sse2x1 3880 MB/s
raid6: sse2x2 4421 MB/s
raid6: sse2x4 7265 MB/s
raid6: using algorithm sse2x4 (7265 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 284k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:3e:d3:5b, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
scsi 10:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 10:0:0:0: [sdb] 2006673 512-byte hardware sectors (1027 MB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] 2006673 512-byte hardware sectors (1027 MB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sd 10:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
[-- Attachment #9: 64-ahci-iomem --]
[-- Type: application/octet-stream, Size: 1728 bytes --]
00000000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000c0000-000cffff : pnp 00:0d
000e4000-000fffff : reserved
00100000-cff7ffff : System RAM
00200000-007d271b : Kernel code
007d271c-00ad758f : Kernel data
00b28000-00b93147 : Kernel bss
cff80000-cff8dfff : ACPI Tables
cff8e000-cffdffff : ACPI Non-volatile Storage
cffe0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : pnp 00:0c
f8f00000-f8ffffff : PCI Bus 0000:04
f9ff8000-f9ffbfff : 0000:00:1b.0
f9ff8000-f9ffbfff : ICH HD audio
f9ffe800-f9ffefff : 0000:00:1f.2
f9ffe800-f9ffefff : ahci
f9fff400-f9fff4ff : 0000:00:1f.3
f9fff800-f9fffbff : 0000:00:1d.7
f9fff800-f9fffbff : ehci_hcd
f9fffc00-f9ffffff : 0000:00:1a.7
f9fffc00-f9ffffff : ehci_hcd
fa000000-fe8fffff : PCI Bus 0000:01
fa000000-fbffffff : 0000:01:00.0
fd000000-fdffffff : 0000:01:00.0
fe8e0000-fe8fffff : 0000:01:00.0
fe900000-fe9fffff : PCI Bus 0000:02
fe9c0000-fe9dffff : 0000:02:00.0
fe9fc000-fe9fffff : 0000:02:00.0
fe9fc000-fe9fffff : sky2
fea00000-feafffff : PCI Bus 0000:03
feae0000-feaeffff : 0000:03:00.0
feafe000-feafffff : 0000:03:00.0
feafe000-feafffff : ahci
feb00000-febfffff : PCI Bus 0000:05
febff000-febfffff : 0000:05:03.0
febff000-febff7ff : ohci1394
fec00000-fec00fff : IOAPIC 0
fec00000-fec00fff : pnp 00:0a
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:07
fed20000-fed3ffff : pnp 00:07
fed50000-fed8ffff : pnp 00:07
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
ffa00000-ffafffff : pnp 00:07
ffb00000-ffbfffff : pnp 00:07
ffe00000-ffffffff : reserved
100000000-22fffffff : System RAM
[-- Attachment #10: 64-ahci-ioports --]
[-- Type: application/octet-stream, Size: 1633 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide_generic
01f0-01f7 : ide_generic
0290-0297 : pnp 00:06
0376-0376 : ide_generic
03c0-03df : vga+
03f6-03f6 : ide_generic
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0480-04bf : 0000:00:1f.0
0480-04bf : pnp 00:07
04d0-04d1 : pnp 00:07
0800-087f : 0000:00:1f.0
0800-087f : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
a400-a41f : 0000:00:1f.2
a400-a41f : ahci
a480-a483 : 0000:00:1f.2
a480-a483 : ahci
a800-a807 : 0000:00:1f.2
a800-a807 : ahci
a880-a883 : 0000:00:1f.2
a880-a883 : ahci
ac00-ac07 : 0000:00:1f.2
ac00-ac07 : ahci
b080-b09f : 0000:00:1d.0
b080-b09f : uhci_hcd
b400-b41f : 0000:00:1d.1
b400-b41f : uhci_hcd
b480-b49f : 0000:00:1d.2
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1a.0
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1a.1
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1a.2
bc00-bc1f : uhci_hcd
c000-cfff : PCI Bus 0000:01
cc00-cc7f : 0000:01:00.0
d000-dfff : PCI Bus 0000:02
d800-d8ff : 0000:02:00.0
d800-d8ff : sky2
e000-efff : PCI Bus 0000:03
e400-e40f : 0000:03:00.1
e400-e40f : pata_jmicron
e480-e483 : 0000:03:00.1
e480-e483 : pata_jmicron
e800-e807 : 0000:03:00.1
e800-e807 : pata_jmicron
e880-e883 : 0000:03:00.1
e880-e883 : pata_jmicron
ec00-ec07 : 0000:03:00.1
ec00-ec07 : pata_jmicron
[-- Attachment #11: 64-ide-dmesg --]
[-- Type: application/octet-stream, Size: 15457 bytes --]
utton (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CFF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: ACPI0007:00 is registered as cooling_device0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:03:00.0: version 3.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.01: NODEV after polling detection
ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB01, max UDMA/100
ata3.00: configured for UDMA/100
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: [LDM] sda1 sda2 sda3 sda4 sda5 sda6
sd 3:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: SAMSUNG HD642JJ, 1AA01110, max UDMA7
ata5.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 1250263728 512-byte hardware sectors (640135 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 1250263728 512-byte hardware sectors (640135 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 4:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
ata8: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 2-2: configuration #1 chosen from 1 choice
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00000081db]
usb 8-1: new low speed USB device using uhci_hcd and address 2
usb 8-1: configuration #1 chosen from 1 choice
usb 8-2: new low speed USB device using uhci_hcd and address 3
usb 8-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1 2262 MB/s
raid6: int64x2 2851 MB/s
raid6: int64x4 2726 MB/s
raid6: int64x8 2208 MB/s
raid6: sse2x1 3877 MB/s
raid6: sse2x2 4417 MB/s
raid6: sse2x4 7250 MB/s
raid6: using algorithm sse2x4 (7250 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 284k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:3e:d3:5b, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
scsi 8:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 8:0:0:0: [sdc] 2006673 512-byte hardware sectors (1027 MB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] 2006673 512-byte hardware sectors (1027 MB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
[-- Attachment #12: 64-ide-iomem --]
[-- Type: application/octet-stream, Size: 1668 bytes --]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000c0000-000cffff : pnp 00:0d
000e4000-000fffff : reserved
00100000-cff7ffff : System RAM
00200000-007d271b : Kernel code
007d271c-00ad758f : Kernel data
00b28000-00b93147 : Kernel bss
cff80000-cff8dfff : ACPI Tables
cff8e000-cffdffff : ACPI Non-volatile Storage
cffe0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : pnp 00:0c
f8f00000-f8ffffff : PCI Bus 0000:04
f9ff8000-f9ffbfff : 0000:00:1b.0
f9ff8000-f9ffbfff : ICH HD audio
f9fff400-f9fff4ff : 0000:00:1f.3
f9fff800-f9fffbff : 0000:00:1d.7
f9fff800-f9fffbff : ehci_hcd
f9fffc00-f9ffffff : 0000:00:1a.7
f9fffc00-f9ffffff : ehci_hcd
fa000000-fe8fffff : PCI Bus 0000:01
fa000000-fbffffff : 0000:01:00.0
fd000000-fdffffff : 0000:01:00.0
fe8e0000-fe8fffff : 0000:01:00.0
fe900000-fe9fffff : PCI Bus 0000:02
fe9c0000-fe9dffff : 0000:02:00.0
fe9fc000-fe9fffff : 0000:02:00.0
fe9fc000-fe9fffff : sky2
fea00000-feafffff : PCI Bus 0000:03
feae0000-feaeffff : 0000:03:00.0
feafe000-feafffff : 0000:03:00.0
feafe000-feafffff : ahci
feb00000-febfffff : PCI Bus 0000:05
febff000-febfffff : 0000:05:03.0
febff000-febff7ff : ohci1394
fec00000-fec00fff : IOAPIC 0
fec00000-fec00fff : pnp 00:0a
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:07
fed20000-fed3ffff : pnp 00:07
fed50000-fed8ffff : pnp 00:07
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
ffa00000-ffafffff : pnp 00:07
ffb00000-ffbfffff : pnp 00:07
ffe00000-ffffffff : reserved
100000000-22fffffff : System RAM
[-- Attachment #13: 64-ide-ioports --]
[-- Type: application/octet-stream, Size: 1989 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide_generic
01f0-01f7 : ide_generic
0290-0297 : pnp 00:06
0376-0376 : ide_generic
03c0-03df : vga+
03f6-03f6 : ide_generic
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0480-04bf : 0000:00:1f.0
0480-04bf : pnp 00:07
04d0-04d1 : pnp 00:07
0800-087f : 0000:00:1f.0
0800-087f : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
9400-940f : 0000:00:1f.2
9400-940f : ata_piix
9480-948f : 0000:00:1f.2
9480-948f : ata_piix
9800-9803 : 0000:00:1f.2
9800-9803 : ata_piix
9880-9887 : 0000:00:1f.2
9880-9887 : ata_piix
9c00-9c03 : 0000:00:1f.2
9c00-9c03 : ata_piix
a000-a007 : 0000:00:1f.2
a000-a007 : ata_piix
a400-a40f : 0000:00:1f.5
a400-a40f : ata_piix
a480-a48f : 0000:00:1f.5
a480-a48f : ata_piix
a800-a803 : 0000:00:1f.5
a800-a803 : ata_piix
a880-a887 : 0000:00:1f.5
a880-a887 : ata_piix
ac00-ac03 : 0000:00:1f.5
ac00-ac03 : ata_piix
b000-b007 : 0000:00:1f.5
b000-b007 : ata_piix
b080-b09f : 0000:00:1d.0
b080-b09f : uhci_hcd
b400-b41f : 0000:00:1d.1
b400-b41f : uhci_hcd
b480-b49f : 0000:00:1d.2
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1a.0
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1a.1
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1a.2
bc00-bc1f : uhci_hcd
c000-cfff : PCI Bus 0000:01
cc00-cc7f : 0000:01:00.0
d000-dfff : PCI Bus 0000:02
d800-d8ff : 0000:02:00.0
d800-d8ff : sky2
e000-efff : PCI Bus 0000:03
e400-e40f : 0000:03:00.1
e400-e40f : pata_jmicron
e480-e483 : 0000:03:00.1
e480-e483 : pata_jmicron
e800-e807 : 0000:03:00.1
e800-e807 : pata_jmicron
e880-e883 : 0000:03:00.1
e880-e883 : pata_jmicron
ec00-ec07 : 0000:03:00.1
ec00-ec07 : pata_jmicron
next prev parent reply other threads:[~2008-08-30 19:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-22 15:29 Intel AHCI ICH9R not detecting devices xerces8
2008-08-30 10:40 ` Tejun Heo
2008-08-30 19:42 ` xerces8 [this message]
2008-09-01 9:13 ` Tejun Heo
2008-09-01 10:40 ` xerces8
2008-09-06 18:12 ` xerces8
2008-09-06 21:31 ` xerces8
2008-09-08 11:35 ` Tejun Heo
2008-09-08 11:43 ` xerces8
2008-09-08 11:54 ` Tejun Heo
2008-09-12 7:53 ` xerces8
2008-09-12 8:38 ` [PATCH] ide: note that IDE generic may prevent other drivers from attaching Tejun Heo
2008-09-27 17:13 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=WorldClient-F200808302142.AA42270030@butn.net \
--to=xerces8@butn.net \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=stein@hermes.si \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).