[PATCH] ata: pata_hpt3x2n: prevent potential forever loop in hpt3xn_calibrate_dpll()

[Dan Carpenter <error27@gmail.com>]

This code accidentally reuses "tries" as the iterator for both the inside
and outside loops.  It means that the potentially the "tries" could be
reset to 0x1000 and never reach 0x5000.

Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Signed-off-by: Dan Carpenter <error27@gmail.com>
---
 drivers/ata/pata_hpt3x2n.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 617c95522f43..447dc287a2d4 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -380,14 +380,14 @@ static int hpt3xn_calibrate_dpll(struct pci_dev *dev)
 {
 	u8 reg5b;
 	u32 reg5c;
-	int tries;
+	int tries, tries2;
 
 	for (tries = 0; tries < 0x5000; tries++) {
 		udelay(50);
 		pci_read_config_byte(dev, 0x5b, &reg5b);
 		if (reg5b & 0x80) {
 			/* See if it stays set */
-			for (tries = 0; tries < 0x1000; tries++) {
+			for (tries2 = 0; tries2 < 0x1000; tries2++) {
 				pci_read_config_byte(dev, 0x5b, &reg5b);
 				/* Failed ? */
 				if ((reg5b & 0x80) == 0)
-- 
2.35.1